Effects of carbon on electrochemical performance of red phosphorus(P) and carbon composite as anode for sodium ion batteries

Red phosphorus/graphite(P/G) and red phosphorus/carbon nanotube(P/CNT) composites were prepared by ball milling red phosphorus with CNTs and graphite, respectively. The electrochemical results show superior electrochemical performances of the P/G and P/CNT composites compared with that of the reference sample milled with Super-P carbon. After 70 cycles, the P/G and P/CNT composites remained771.6 and 431.7 mA h g^-1, with 68 % and 50 % capacity retention, respectively. With increasing the milling time(20 h), CNTs were cut into short pieces and then broken into carbon rings and sheets which were well mixed with red phosphorus. The morphology of the P/CNT composite can buffer the large volume changes from alloying and de-alloying during cycling, resulting in the enhanced cycling stability.     

Structure and electrochemical performance of ZnO/CNT composite as anode material for lithium-ion batteries

Metal oxides are well-known potential alternatives to graphite as anode materials of lithium-ion batteries, and they can deliver much higher reversible capacities than graphite even at high current densities. In this study, hexagonal disk-shaped ZnO are synthesized by a facile solution reaction of ZnCl₂ and its composite is prepared in the presence of carbon nanotubes (CNTs). The as prepared ZnO/CNT composite has been characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy, fourier transform-infrared spectroscopy and Rutherford backscattering spectroscopy. Electrochemical characterization by cyclic voltammetry, electrochemical impedance spectroscopy, and galvanostatic discharge/charge tests demonstrate that the conversion reactions in ZnO and ZnO/CNT electrodes enable reversible capacity of 478 and 602 mAh g^?1, respectively for up to 50 cycles. Our investigation highlights the importance of anchoring of small ZnO particles on CNTs for maximum utilization of electrochemically active ZnO and CNTs for energy storage application in lithium-ion batteries.     

Preparation, characterization and anion exchange properties of polypyrrole/carbon nanotube nanocomposites

In this study, polypyrrole (PPy) thin films were electrodeposited on carbon nanotube (CNT) backbones by applying a constant deposition potential in 0.1 M pyrrole solution with different electrolytes, such as NaCl, NaNO3, or NaClO4. The hybrid films were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy, and cyclic voltammetry. SEM images revealed the nanostructrure of PPy films generated on CNT surface. The electrochemical and anion exchange properties of the PPy-CNT composite films have been investigated. Nanostructured composite thin films of PPy-CNTs were studied by cyclic voltammetry between 0.4 and -0.8 V in aqueous solution to evaluate their cycling stability and capacity for electrically switched anion exchange. The presence of the CNT backbone greatly improved the anion exchange capacity and stability of the PPy-CNT composite film, which may be attributed to the high surface area of CNT matrix, nanostructure of the PPy film, and the interaction between CNTs and PPy.     

Growth and characterization of bamboo-shaped carbon nanotubes using nanocluster-assembled ZnO:Co thin films as catalyst

Bamboo-shaped carbon nanotubes (CNTs) had been successfully fabricated by a plasma enhanced chemical vapor deposition method, in which nanocluster-assembled ZnO:Co thin film was used as catalyst. It was found that bamboo-shaped CNTs were generally grown in a direction perpendicularly to the substrate surface with the tops of CNTs dominated by the droplet-like catalyst covered by the carbon layer. The diameter of CNTs was ranged from 20-50 nm. High resolution of TEM image showed that the typical CNT had a multi-walled structure with an inner core presented. The ordered graphite layers were inclined to an axis of CNT about 18 degrees and the interlayer space of a CNT was about 0.35 nm. Two peaks in Raman spectrum at 1586 cm(-1) and 1372 cm(-1) were identified as G-band and D-band for graphite, respectively. The results showed that catalyst based on ZnO:Co thin films could be used for the growth of CNTs with bamboo-shaped structure.     

超细Sn和SnO_2与碳复合的锂离子电池负极材料的制备及其电化学性能

采用溶液法以SnCl4.5H2O和葡萄糖为原料合成了颗粒尺寸为几个纳米的超细Sn及SnO2颗粒分布于无定形碳基体的复合材料,并在溶液过程中引入少量石墨。采用XRD、SEM和TEM等材料结构分析方法和恒电流充放电等电化学测试方法分析研究了前驱体的煅烧温度和石墨的引入对获得产物的结构及其作为锂离子电池负极材料的电化学性能的影响。研究结果表明,在500～700℃的煅烧温度下获得的Sn/C及含少量SnO2的Sn/SnO2/C复合材料,由于其中的Sn及SnO2的超细纳米尺寸及碳基体的缓冲有效减小了Sn在脱嵌锂过程中的应变和粉化,使材料具有良好的循环性能。石墨的引入有效提高了复合材料的容量和循环稳定性。经500℃煅烧的复合电极材料相对于其它材料具有更高的容量,其首次可逆容量达520mAh/g,经初始几个循环后,容量趋于稳定,经100次循环后,容量保持在350mAh/g。     

Preparation of nano-sized graphite-supported CuO and Cu-Sn as active materials in lithium ion batteries

Nano-sized Cu-Sn and Cu oxide particles supported on ball-milled graphite were synthesized, and their electrochemical characteristics for use as anode active materials in lithium-ion batteries were investigated. The samples were also characterized via FE-SEM, XRD, and TGA. Most of the Cu oxides on BMG were monoclinic CuO crystals, whereas the Cu-Sn particles were composed of hexagonal Cu3Sn and tetragonal SnO2 crystals. These particles may contribute to an increase in the reversible capacity of lithium ion batteries.     

SnO(2) nanorod-planted graphite: an effective nanostructure configuration for reversible lithium ion storage

We report a novel architecture of SnO(2) nanorod-planted graphite particles for an efficient Li ion storage material that can be prepared by a simple catalyst-assisted hydrothermal process. Rectangular-shaped SnO(2) nanorods are highly crystalline with a tetragonal rutile phase and distributed uniformly over the surface of micrometer-sized graphite particles. In addition, the size dimensions of grown SnO(2) nanorods can be controlled by varying the synthesis conditions. The diameter can be engineered to a sub-100 nm range, and the length can be controlled to up to several hundred nanometers. Significantly, the SnO(2) nanorod-planted graphite demonstrates an initial Li ion storage capacity of about 1010 mAh g(-1) during the first cycle. Also, these SnO(2)-graphite composites show high Coulombic efficiency and cycle stability in comparison with SnO(2) nanomaterials that are not combined with graphite. The enhanced electrochemical properties of SnO(2) nanorod-planted graphite, as compared with bare SnO(2) materials, inspire better design of composite materials with effective nanostructural configurations for advanced electrodes in lithium ion batteries.     

Proliferation of osteoblast cells on nanotubes

Carbon nanotubes (CNT) have a unique structure and feature. In the present study, cell proliferation was performed on the scaffolds of single-walled CNTs (SWCNT), multiwalled CNTs (MWCNT), and on graphite, one of the representative isomorphs of pure carbon, for the sake of comparison. Scanning electron microscopy observation of the growth of osteoblast-like cells (Saos2) cultured on CNTs showed the morphology fully developed for the whole direction, which is different from that extended to one direction on the usual scaffold. Numerous filopodia were grown from cell edge, extended far long and combined with the CNT meshwork. CNTs showed the affinity for collagen and proteins. Proliferated cell numbers are largest on SWCNTs, followed by MWCNTs, and are very low on graphite. This is in good agreement with the sequence in the results of the adsorbed amount of proteins and expression of alkaline phosphatase activity for these scaffolds. The adsorption of proteins would be one of the most influential factors to make a contrast difference in cell attachment and proliferation between graphite and CNTs, both of which are isomorphs of carbon and composed of similar graphene sheet crystal structure. In addition, the nanosize meshwork structure with large porosity is another property responsible for the excellent cell adhesion and growth on CNTs. CNTs could be the favorable materials for biomedical applications.     

基于高活性碳纳米管海绵体载硫的锂硫电池

用CVD法制备的碳纳米管(CNTs)之间的相互吸引,将其堆叠成具有网状结构、多孔及高活性等优点的CNT海绵体(CNTS).于是,硫蒸气可在CNTs管束上形核沉积并与其紧密接触,使正极电子的高速传输从而提高电池的倍率性能;用XRD、SEM、拉曼光谱等手段测试CNTS载硫前后的极片,考察了硫在CNTs表面的分布和载硫对其结...     

Enhanced field emission characteristics of nitrogen-doped carbon nanotube films grown by microwave plasma enhanced chemical vapor deposition process

Nitrogen-doped carbon nanotube (CNT) films have been synthesized by simple microwave plasma enhanced chemical vapor deposition technique. The morphology and structures were investigated by scanning electron microscopy and high resolution transmission electron microscopy. Morphology of the films was found to be greatly affected by the nature of the substrates. Vertically aligned CNTs were observed on mirror polished Si substrates. On the other hand, randomly oriented flower like morphology of CNTs was found on mechanically polished ones. All the CNTs were found to have bamboo structure with very sharp tips. These films showed very good field emission characteristics with threshold field in the range of 2.65-3.55 V/μm. CNT film with flower like morphology showed lower threshold field as compared to vertically aligned structures. Open graphite edges on the side surface of the bamboo-shaped CNT are suggested to enhance the field emission characteristics which may act as additional emission sites.     

Field emission characteristics from tapered ZnO nanostructures grown onto vertically aligned carbon nanotubes

Zinc oxide (ZnO) nanostructures were grown on vertically aligned carbon nanotubes (CNTs) using thermal chemical vapor deposition (CVD) to enhance the field emission characteristics. The shape of ZnO nanostructure was tapered. Scanning electron microscopy (SEM) image showed the ZnO nanostructures were grown onto CNT surface uniformly. The field electron emission of pristine CNTs and ZnO-coated CNTs were measured. The results showed that ZnO nanostructures grown onto CNTs could improve the field emission characteristics. The ZnO-coated CNTs had a threshold electric field at about 3.1 V/μm at 1.0 mA/cm². The results demonstrated that the ZnO-coated CNT is an ideal field emitter candidate material. The stability of the field emission current was also tested.     

Isothermal crystallization behavior and mechanical properties of polylactide/carbon nanotube nanocomposites

Carbon nanotube (CNT)–reinforced polylactide (PLA) nanocomposites were prepared using a melt compounding process employing a twin-screw extruder. The isothermal crystallization kinetics of PLA/CNT nanocomposites according to Avrami’s theory were analyzed using differential scanning calorimetry in the temperature range 90–120 °C. There was a significant dependence of CNT on the crystallization behavior of the PLA matrix. The incorporation of CNT improved effectively the crystallization rate of PLA/CNT nanocomposites through heterogeneous nucleation. The nucleating effect of CNTs which increased the number of nucleation sites and decreased the average spherulite size was confirmed using polarized optical microscopy. The rheological properties of the PLA/CNT nanocomposites were also investigated. Changes in the microstructure of the PLA/CNT nanocomposites occurred by incorporating CNT. Furthermore, the tensile strength/modulus and thermal stability of PLA/CNT nanocomposites were enhanced when a very small quantity of CNT was added. This research accounts for the effect of CNTs, which significantly influenced the isothermal behavior, thermal stability, mechanical, and rheological properties of the PLA/CNT nanocomposites, providing a design guide for PLA/CNT nanocomposites in industrial fields.     

Composite films prepared by immersion deposition of manganese oxide in carbon nanotubes grown on graphite for supercapacitors

Manganese oxide/carbon nanotube (CNT) composite films on graphite were prepared by growing CNTs on the substrate using chemical vapor deposition (CVD), followed by immersion in an aqueous solution of potassium permanganate. The CVD growth created favorable conditions for deposition of the oxide on the electrode, and an aligned porous structure of the composite films, which originated from the CNT growth, could be managed. Electrochemical behaviors of the CNT and the composite films for supercapacitors were studied in 1 M Na₂SO₄ solution. While the oxide deposition in the CNT films was identified as contributing to capacitance enhancement, it was also found that a mild heat treatment could improve performance of the composite films.     

Probing electrical transport in individual carbon nanotubes and junctions

The electrical transport properties of individual carbon nanotubes (CNTs) and multi-terminal junctions of CNTs are investigated with a quadraprobe scanning tunneling microscope. The CNTs used in this study are made of stacked herringbone-type conical graphite sheets with a cone angle of ～20° to the tube axis, and the CNT junctions have no catalytic particles in the junction areas. The CNTs have a significantly higher resistivity than conventional CNTs with concentric walls. The straight CNTs display linear current-voltage (I-V) characteristics, indicating diffusive transport rather than ballistic transport. The structural deformation in CNTs with bends substantially increases the resistivity in comparison with that for the straight segments on the same CNTs, and the I-V curve departs slightly from linearity in curved segments. The junction area of the CNT junctions behaves like an ohmic-type scattering center with linear I-V characteristics. In addition, a gating effect has not been observed, in contrast to the case for conventional multi-walled CNT junctions. These unusual transport properties can be attributed to the enhanced inter-layer interaction in the herringbone-type CNTs.     

One-pot synthesis of Pt/carbon nanotubes by self-regulated reduction for electrocatalysis

This paper describes a method for size-controlled synthesis of Pt nanoparticles and their attachment to the sidewalls of multiwall carbon nanotubes (CNTs) by self-regulated reduction of sodium n-dodecyl sulfate (SDS), without surface pretreatment. The size of the Pt nanoparticles is controlled by adjusting the concentration of SDS. When Pt/CNTs are heated to 500 degrees C in N2 atmosphere, Pt nanochains are formed on the CNTs; some of these nanochains contain small islands. Electrochemical measurements confirm that the electroactivities of the Pt/CNT nanocatalysts increase with a decrease in the size of the Pt nanoparticles. Additionally, comparing with the heated Pt/CNT nanocatalysts containing smooth Pt nanochains, the heated Pt/CNT nanocatalysts containing Pt nanochains with small Pt islands show higher electrocatalysis activities and stability.     

Hydrothermal synthesis of carbon nanotube/cubic Fe3O4 nanocomposite for enhanced performance supercapacitor electrode material

Carbon nanotube/Fe₃O₄ (CNT/Fe₃O₄) nanocomposite with well-dispersed Fe₃O₄ nano-cubes inlaid on the surfaces of carbon nanotubes, was synthesized through an easy and efficient hydrothermal method. The electrochemical behaviors of the nanocomposite were analyzed by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and chronopotentiometry in 6 M KOH electrolyte. Results demonstrated that CNT as the supporting material could significantly improve the supercapacitor (SC) performance of the CNT/Fe₃O₄ composite. Comparing with pure Fe₃O₄, the resulting composite exhibited improved specific capacitances of 117.2 F/g at 10 mA/cm² (3 times than that of pure Fe₃O₄), excellent cyclic stability and a maximum energy density of 16.2 Wh/kg. The much improved electrochemical performances could be attributed to the good conductivity of CNTs as well as the anchored Fe₃O₄ particles on the CNTs.     

Effects of Supercritical Fluids Activation on Carbon Nanotube Field Emitters

This paper proposes a novel method to enhance the emission characteristics of carbon nanotubes (CNTs). It is extremely possible for CNTs to adsorb moisture and other contaminants during the fabrication processes, leading to the degraded field emission characteristics. In this work, CNT emitters are activated with commonly used heating process and supercritical carbon dioxide (SCCO₂) fluids technology for removing adsorbed residue moisture. Experimental results have demonstrated that the electrical stability and field emission enhancement of CNT emitters are effectively achieved by the SCCO₂ fluids treatment compared to the heating process, due to the minimization of residuary moisture in CNTs     

Field emission properties of RuO2 thin film coated on carbon nanotubes

Carbon nanotubes (CNTs) have been widely applied in field emission (FE) due to their high geometric aspect ratio and low work function. More recently, researchers have introduced ruthenium dioxide (RuO₂) as a field emitter because of its excellent chemical and thermal stability due to its oxide nature. This study used the surface morphology of CNTs and the field emission (FE) stability of RuO₂ to improve FE characteristics. Since the work functions of CNTs and RuO₂ are very close, this study combined these two elements by applying a thin film of RuO₂ on the CNT surface. In the process of covering the tips of CNTs with a thin film of RuO₂ eventually obtained the best matching of these two elements. The study not only enhanced the FE performance of CNTs but also extended FE lifetime by applying a thin film of RuO₂ on the CNT tips.     

Combination effect of physical drying with chemical characteristic of carbon nanotubes on through-thickness properties of carbon fiber/epoxy composites

The present work studied the combination effect of physical drying with chemical modification of carbon nanotubes (CNTs) on some through-thickness properties of carbon fiber/epoxy composites. Different drying methods of heat drying and freeze drying were utilized to affect CNT organization form in carbon fiber/CNTs preforms and composites: The adoption of heat-drying method made CNTs more inclined to form aggregates accompanied with randomly scattered CNTs, while continuous CNT networks could always be assembled when freeze drying method was employed. The formation mechanism of such CNT networks was discussed, and could be described as “freeze drying within confined space.” Chemical characteristic of CNTs was controlled by choosing different solutions of non-functionalized CNTs (NOCNTs) or hydroxyl-modified CNTs (OHCNTs). As a consequence, CNT networks modified composites, especially that with OHCNTs formed networks, displayed significantly better electrical performance than composites with CNT aggregates and scattered CNTs; NOCNT networks and scattered OHCNTs made the corresponding composites possess higher interlaminar shear strength (ILSS) value, whereas OHCNT networks impaired ILSS while enhancing flexural strength and modulus of composites.     

Field emission properties of RuO2 thin film coated on carbon nanotubes

Carbon nanotubes (CNTs) have been widely applied in field emission (FE) due to their high geometric aspect ratio and low work function. More recently, researchers have introduced ruthenium dioxide (RuO₂) as a field emitter because of its excellent chemical and thermal stability due to its oxide nature. This study used the surface morphology of CNTs and the field emission (FE) stability of RuO₂ to improve FE characteristics. Since the work functions of CNTs and RuO₂ are very close, this study combined these two elements by applying a thin film of RuO₂ on the CNT surface. In the process of covering the tips of CNTs with a thin film of RuO₂ eventually obtained the best matching of these two elements. The study not only enhanced the FE performance of CNTs but also extended FE lifetime by applying a thin film of RuO₂ on the CNT tips.