Reconstruction dynamics of recorded holograms in photochromic glass

We have investigated the dynamics of the record-erase process of holograms in photochromic glass using continuum Nd:YVO? laser radiation (λ=532 nm). A bidimensional microgrid pattern was formed and visualized in photochromic glass, and its diffraction efficiency decay versus time (during reconstruction step) gave us information (D, Δn) about the diffusion process inside the material. The recording and reconstruction processes were carried out in an off-axis setup, and the images of the reconstructed object were recorded by a CCD camera. Measurements realized on reconstructed object images using holograms recorded at a different incident power laser have shown a two-stage process involved in silver atom kinetics.     

Magnified reconstruction of digitally recorded holograms by Fresnel-Bluestein transform

A method for numerical reconstruction of digitally recorded holograms with variable magnification is presented. The proposed strategy allows for smaller, equal, or larger magnification than that achieved with Fresnel transform by introducing the Bluestein substitution into the Fresnel kernel. The magnification is obtained independent of distance, wavelength, and number of pixels, which enables the method to be applied in color digital holography and metrological applications. The approach is supported by experimental and simulation results in digital holography of objects of comparable dimensions with the recording device and in the reconstruction of holograms from digital in-line holographic microscopy.     

Signal-to-noise ratio of nonlinearity recorded holograms of diffuse objects

A nonlinear model for holographic recording materials is used to evaluate the signal-to-noise ratio in diffuse-object holograms. A comparison of this model with the linear model proposed by Upatnieks and Leonard [J. Opt. Soc. Am. 60, 297 (1970)] shows that our model justifies the experimental results obtained for dieletric holograms at high density before bleaching.     

Twin-sensitivity measurement by spatial multiplexing of digitally recorded holograms

We present an all-numeric multiplexing/demultiplexing technique for digitally recorded holograms that allow the simultaneous determination of the in-plane and the out-of-plane components of the displacement vector of an object submitted to some loading. The twin-sensitivity measurement is obtained from two different illumination directions that give two sensitivity vectors. The spatial multiplexing is achieved by an incoherent mixing of two duplets of coherent waves that produce holograms carried with orthogonal polarized reference waves. The spatial demultiplexing uses the autocorrelation function of the multiplexed holograms as a position estimator. The estimator then enables the determination of the pixel-to-pixel correspondence between the holograms for the double component determination. Results of the experiment are presented.     

Sidelobeless multiple-object discriminant filters recorded as discrete-type computer-generated holograms

The computer generation of sidelobeless multiple-object discriminant correlation filters has been stressed. We propose to synthesize the filter functions by use of the simulated-annealing algorithm. By this method the filters can be obtained as discrete-type computer-generated holograms. The filters can suppress the sidelobes and provide sharp correlation peaks. A computer simulation and an optical experiment were performed, and the expected correlation responses were obtained.     

Hypersensitization in reflection holograms recorded in Agfa-Gevaert 8E75HD plates

Abstract

We study the effect of the hypersensitization with sodium sulphite in Agfa-Gevaert 8E75HD holographic plates in reflection holograms. An enhancement of energetic sensitivity and diffraction efficiency is observed with low solvent effects when Agfa-Gevaert 8E75HD are pre-processed. A 2–5 times increase of the sensitivity, together with temporal stability, is observed in reflection holograms.     

Computer-generated holograms of three-dimensional realistic objects recorded without wave interference

We propose a method of synthesizing computer-generated holograms of real-life three-dimensional (3-D) objects. An ordinary digital camera illuminated by incoherent white light records several projections of the 3-D object from different points of view. The recorded data are numerically processed to yield a two-dimensional complex function, which is then encoded as a computer-generated hologram. When this hologram is illuminated by a plane wave, a 3-D real image of the object is reconstructed.     

Compression of digital holograms for three-dimensional object reconstruction and recognition

We present the results of applying lossless and lossy data compression to a three-dimensional object reconstruction and recognition technique based on phase-shift digital holography. We find that the best lossless (Lempel-Ziv, Lempel-Ziv-Welch, Huffman, Burrows-Wheeler) compression rates can be expected when the digital hologram is stored in an intermediate coding of separate data streams for real and imaginary components. The lossy techniques are based on subsampling, quantization, and discrete Fourier transformation. For various degrees of speckle reduction, we quantify the number of Fourier coefficients that can be removed from the hologram domain, and the lowest level of quantization achievable, without incurring significant loss in correlation performance or significant error in the reconstructed object domain.     

Computer-generated holograms of a real three-dimensional object based on stereoscopic video images

A novel method of using stereoscopic video images to synthesize the computer-generated hologram (CGH) patterns of a real 3D object is proposed. Stereoscopic video images of a real 3D object are captured by a 3D camera system. Disparity maps between the captured stereo image pairs are estimated and from these estimated maps the depth data for each pixel of the object can be extracted on a frame basis. By using these depth data and original color images, hologram patterns of a real object can be computationally generated. In experiments, stereoscopic video images of a real 3D object, a wooden rhinoceros doll, are captured by using the Wasol 3D adapter system and its depth data are extracted from them. Then, CGH patterns of 1280 pixels x 1024 pixels are generated with these depth-annotated images of the wooden rhinoceros doll, and the CGH patterns are experimentally displayed via a holographic display system.     

Calculation method for computer-generated holograms with cylindrical basic object light by using a graphics processing unit

It takes an enormous amount of time to calculate a computer-generated hologram (CGH). A fast calculation method for a CGH using precalculated object light has been proposed in which the light waves of an arbitrary object are calculated using transform calculations of the precalculated object light. However, this method requires a huge amount of memory. This paper proposes the use of a method that uses a cylindrical basic object light to reduce the memory requirement. Furthermore, it is accelerated by using a graphics processing unit (GPU). Experimental results show that the calculation speed on a GPU is about 65 times faster than that on a CPU.     

Fixation-free bleached silver halide transmission holograms recorded on Slavich PFG-01 red sensitive plates

Abstract

Bleaching is one of the most widely used techniques in the production of phase holograms of high quality on photographic emulsion, particularly in rehalogenating techniques without a fixation step. These techniques were very well understood when Agfa 8E75 HD emulsion was used for the recording. Production of Agfa material for applications to holography ceased in 1997, so these techniques must be optimized for the silver halide materials which are currently available. In this paper we present experimental results for fixation-free rehalogenating bleached holograms derived from the Slavich PFG-01 emulsion, a red-sensitive fine-grained emulsion from the Slavich Company. The influence of the potassium bromide concentration in the bleach solution on the final quality of the holograms is studied. The concentrations of the different components of the bleach solution are adjusted to obtain the highest values of the diffraction efficiency. A comparative study is also made with bleached holograms recorded on Agfa 8E75 HD plates. We will show that high diffraction efficiencies can be obtained when fixation-free rehalogenating bleached holograms are recorded on Slavich PFG-01 plates.     

Adaptive calibration for object localization in turbid media with interfering diffuse photon density waves

The amplitude cancellation method that uses dual out-of-phase sources (a phased array system) can sensitively detect and locate small objects in turbid media. The balance of these two sources is crucial to the system's detection sensitivity and accuracy. We describe a convenient method with which to adaptively calibrate the amplitudes of the two sources at each scanning position by use of low-frequency modulation of the intensity of the in-phase and the antiphase sources. We achieve accurate localization ability of the phased array system by accounting for the influence of asymmetrical boundaries and the heterogeneous background absorption. Experimental data on human breast phantoms demonstrate that localization accuracy within several millimeters has been accomplished through this method.     

Digital image decoding for in-line X-ray holography using two holograms

Abstract

A novel solution to twin-image disturbance in in-line X-ray holography is presented. By computer simulation, this two-hologram-based digital way is proved to be efficient, while conditions relating to experiments are taken into account.     

Generalized thermo-viscoelastic plane waves with two relaxation times

The model of the two-dimensional generalized thermo-viscoelasticity with two relaxation times (Green and Lindsay theory) is established. The normal mode analysis is used to obtain the exact expressions for the temperature distribution, thermal stresses and the displacement components. The resulting formulation is applied to three different concrete problems. The first deals with a thick plate subjected to a time-dependent heat source on each face. The second concerns to the case of a heated punch moving across the surface of a semi-infinite thermo-viscoelastic half-space subjected to appropriate boundary conditions and the third problem deals with a plate with thermo-isolated surfaces subjected to a time-dependent compression. Numerical results are given and illustrated for each problem. Comparisons are made with the results predicted by the coupled theory.     

Bleached silver halide volume holograms recorded on Slavich PFG-01 emulsion: The influence of the developer

Abstract

Bleached holograms are one of the most interesting techniques used to produce phase holograms of high quality on photographic emulsions. Of particular interest is the method of fixation-free rehalogenating bleaching. In this paper we will study the influence of the development step in the bleaching process applied to Slavich PFG-01 emulsion, a red-sensitive fine-grained emulsion from the Slavich Company. We will show that the development influences the optimum concentration of potassium bromide in the bleach solution. We will also show that good results can be obtained by using Slavich PFG-01 plates for a wide variety of developers; in the case of the CW-C2 developer a diffraction efficiency of over 70% was reached.     

Photopolarimeter based on two gratings recorded in thin organic films

A photopolarimeter based on two different kinds of diffraction gratings (a two-grating photopolarimeter) has been developed for real-time measurements of the four elements of the Stokes vector. The main elements of the device are a pure polarization grating and an ordinary transmission grating, both recorded by means of holographic techniques in thin films of organic materials. The first one consists of a diffraction grating recorded by two interfering opposite circularly polarized beams in a Langmuir-Blodgett film of an azo-compound material. The second component is a grating recorded by two interfering parallel circularly polarized beams in a thin film of a photosensitive polymer. Both gratings offer long time stability and good diffraction efficiency. Four photodiodes collect the first-order diffracted beams from these gratings, the output signals of which are read through an analog-to-digital converter by a PC. The optical alignment of the device is easy and the calibration is realized in a one-step procedure.     

Guided thermoelastic waves in functionally graded plates with two relaxation times

Functionally graded material (FGM) is a promising heat insulation material. Wave propagation in FGM structures has received much attention for the purpose of non-destructive testing and evaluation. Few literatures dealt with the thermoelastic wave in FGM structures although the thermal effect would cause attenuations of elastic waves. In this paper, guided thermoelastic waves in FGM plates subjected to stress-free, isothermal boundary conditions are investigated in the context of the Green–Lindsay (GL) generalized thermoelastic theories (with two relaxation times). Coupled wave equations and heat conduction equation are solved by the Legendre polynomial approach. Dispersion curves for a pure elastic graded plate are calculated to make a comparison with the published data. For the thermoelastic graded plate, dispersion curves of thermal modes and elastic modes are illustrated simultaneously. Attenuation curves for graded plates with different relaxation times are compared. The influences of different material gradient shapes are discussed. Two homogeneous thermoelastic plates with different volume fractions are obtained to show their differences from graded plates. Finally, thermoelastic wave dispersion curves for a homogeneous plate and a graded plate are calculated in the context of the classical coupled thermoelastic theory (CT) to show its differences and similarities to the generalized theory.