Copper‐Catalyzed C?NH2 Arylation of 2‐Aminobenzimidazoles and Related C‐Amino‐NH‐azoles

A copper(II)‐catalyzed selective C NH₂ arylation of 2‐aminobenzimidazoles and related C‐amino‐NH‐azoles was achieved in presence of 2,2′‐bipyridine and cesium carbonate at 60 °C under open air conditions and this is first method for the copper‐catalyzed selective C NH₂ arylation in the presence of other reactive nucleophilic sites. Previously unexplored heteroaromatics possessing multiple nucleophilic sites that are selectively arylated at the C NH₂ position are obtained, providing an exceptional tool for rapid delivery of a diverse array of medicinally important C NH(aryl) derivatives of aminoazoles without any protection/deprotection of ring N H bonds. It is first example for the selective C NH₂ arylation of 5‐aminoindazole, 4‐aminopyrazole, 5‐aminopyrazole, 9H‐purine‐6‐amine, and 1H‐pyrazolo[3,4‐d]pyrimidin‐4‐amine derivatives.

     

An Indium(III)‐Catalyzed Synthesis of 4,4‐Dichloro‐1‐aryl‐N‐alkyl‐1‐yn‐3‐amines via an Intermolecular C(sp2)?C(sp) Bond Formation

This paper demonstrates an indium(III) triflate‐catalyzed reaction of electron‐deficient α,α‐dichloroaldimines with terminal alkynes leading to a rapid and selective access to highly functionalized propargylic amines in good to excellent yields. The dichloromethylene moiety of the aldimine acts as an activating group to accomplish this transformation under very mild conditions.     

iso‐OPDA: An Early Precursor of cis‐Jasmone in Plants?

Cis-jasmone is a highly appreciated fragrance and plant-derived signal molecule that controls pollination, attracts parasitoids of attacking herbivores, and serves as an intra- and interspecific signal that controls gene expression. cis-Jasmone is produced from linolenic acid along the jasmonic acid cascade. In addition to the conversion of jasmonic acid into cis-jasmone, a novel pathway might exist that converts cis-oxophytodienoic acid (OPDA), an early precursor of jasmonic acid, into iso-OPDA. The planar iso-OPDA is degraded by beta-oxidation to 3,7-didehydrojasmonic acid, which yields cis-jasmone by spontaneous decarboxylation. The degradation of iso-OPDA to cis-jasmone is demonstrated for many plant species and the yeast Saccharomyces cerevisiae.     

Palladium‐Catalyzed C?N Cross‐Coupling of N′‐Monosubstituted Sulfondiimines with Aryl Bromides

A general method for the N‐arylation of sulfondiimines with aryl bromides using tris(dibenzylideneacetone)dipalladium(0) [Pd₂(dba)₃] and 2‐dicyclohexylphosphino‐2′,6′‐diisopropoxybiphenyl (RuPhos) as catalyst system was developed. A new benzothiazine was obtained, and a protocol for the cleavage of para‐methoxyphenyl (PMP) groups in PMP‐protected sulfondiimines has been found, which provides access to synthetically useful NH‐derivatives, that are difficult to prepare by other means.     

Iridium(III)‐Catalyzed Direct C?H Sulfonamidation of 2‐Aryl‐1,2,3‐triazole N‐Oxides with Sulfonyl Azides

We have developed a method for the direct sulfonamidation of 2‐aryl‐1,2,3‐triazole N‐oxides using sulfonyl azides as the amino source to release molecular nitrogen as the sole by‐product. This protocol exhibits excellent functional group tolerance and proceeds efficiently under external oxidant‐free conditions. Various 2‐(2‐sulfonamidoaryl)‐1,2,3‐triazoles were prepared in up to 97% yields for 25 examples with excellent regioselectivity.

     

Nickel‐Catalyzed Cross‐Coupling of Arene‐ or Heteroarenecarbonitriles with Aryl‐ or Heteroarylmanganese Reagents through C?CN Bond Activation

The nickel‐catalyzed cross‐coupling reaction of arene‐ or heteroarenecarbonitriles with aryl‐ or heteroarylmanganese reagents via C CN bond activation has been developed. Both electron‐rich and electron‐deficient nitriles can be employed as the electrophilic substrates. The reaction tolerates a range of functional groups and aromatic heterocycles.     

Copper‐Catalyzed Direct C?H Arylation of Thieno[3,4‐c]pyrrole‐4,6‐dione (TPD): Toward Efficient and Low‐Cost Synthesis of π‐Functional Small Molecules

A series of thieno[3,4‐c]pyrrole‐4,6‐dione (TPD)‐based functional small molecules were efficiently synthesized through direct C H arylations using inexpensive copper salts. In this study, we examined all required reaction parameters including various copper complexes, ligands, bases, and (co)solvents. Under the optimum reaction conditions, the C H arylation proceeded smoothly and a variety of functional groups such as ester, nitrile, fluoride, chloride, triazene, and amine were tolerated. This method provides a step‐economical and relatively low‐cost synthetic alternative to presently used coupling reactions for the preparation of TPD‐containing π‐functional materials.

     

Enantioselective Fluorination of β‐Ketoamides Catalyzed by Ar‐BINMOL‐derived Salan?Copper Complex

A facile and powerful enantioselective construction of C F containing molecules was successfully developed through asymmetric fluorination of β‐ketoamides catalyzed by Ar‐BINMOL‐derived salan–Cu^II system (Ar‐BINMOL=1,1′‐Binaphthalene‐2‐α‐arylmethanol‐2′‐ol, Cu = copper). The present catalytic system exhibited excellent enantioselectivity and a broad substrate scope for indanone‐derived β‐ketoamides under mild conditions (up to 99 % ee and 99 % yields). Notably, the biomimetic salan‐copper complex was demonstrated for the first time to be a highly efficient catalyst in the fluorination of β‐ketoamides. Experimental results and mechanistic studies indicated that both excess amount of copper salt and electrophilic attack of cationic fluorine to activated methylene assisted by amide group on the β‐ketoamides were key factors for high yield and excellent enantioselectivity, respectively, in this enantioselective fluorination, which was controlled by the two‐point binding between the salan–copper complex with cyclic β‐ketoamides and hydrogen‐bonding activation of the electrophilic fluorinating reagent.

     

One‐Step Synthesis of Substituted Benzofurans from ortho‐ Alkenylphenols via Palladium‐Catalyzed C?H Functionalization

A dehydrogenative oxygenation of C(sp²) H bonds with intramolecular phenolic hydroxy groups has been developed, which provides a straightforward and concise access to structurally diversely benzofurans from ortho‐alkenylphenols. The reaction is catalyzed by palladium on carbon (Pd/C) without any oxidants and sacrificing hydrogen acceptors.

     

Synthesis of 3‐Aryl‐1‐trifluoromethyltetrahydroisoquinolines by Brønsted Acid‐Catalyzed C(sp3)?H Bond Functionalization

A concise route to 3‐aryl‐1‐trifluoromethyltetrahydroisoquinolines by a benzylic [1,5]‐hydride shift‐mediated C H bond functionalization was developed. The [1,5]‐hydride shift of the benzylic C(sp³) H bond to the trifluoromethylketimine derived from para‐anisidine occurred smoothly to produce cis‐1‐trifluoromethyl‐3‐aryltetrahydroisoquinolines in good to excellent chemical yields with good diastereoselectivities. In contrast, use of the N H ketimine furnished N‐unprotected tetrahydroisoquinolines in good yields in favor of the trans‐isomer.

     

Design and Synthesis of 2‐Methyl‐7‐aminobenzoxazole as Auxiliary in the Palladium(II)‐Catalyzed Arylation of a beta‐Positioned C(sp3)?H Bond

A palladium(II)‐catalyzed direct arylation of methylene C(sp³) H bonds by 2‐methyl‐7‐aminobenzoxazole as an effective auxiliary is reported. This process exhibited high beta‐site selectivity, broad substrate scope, and compatibility with different functional groups with moderate to high yields up to 89%.

     

Nano‐Iron Oxide as a Recyclable Catalyst for Intramolecular C?N Cross‐Coupling Reactions under Ligand‐Free Conditions: One‐Pot Synthesis of 1,4‐Dihydroquinoline Derivatives

The ligand‐free nanoparticle ferroferric oxide catalytic system has been developed to promote the intramolecular C N cross‐coupling reaction. With this protocol, various 1,4‐dihydroquinoline derivatives were synthesized from o‐halobenzaldehydes and β‐enaminones in moderate to good yields.     

Palladium‐Catalyzed Decarboxylative Coupling of α‐ Oxocarboxylic Acids with C(sp2)?H of 2‐Aryloxypyridines

An efficient palladium‐catalyzed decarboxylative ortho‐acylation of 2‐aryloxypyridines with α‐oxocarboxylic acids is described. In this new transformation, the aromatic C(sp²) H bond was successfully acylated to give diverse aromatic ketones regioselectively in moderate to good yields. The pyridine group can be removed easily after the acylation to give the corresponding 2‐hydroxy aromatic ketones.     

Palladium‐Catalyzed C‐7 Selective C?H Carbonylation of Indolines for Expedient Synthesis of Pyrroloquinazolinediones

A novel palladium‐catalyzed C‐7 selective C H carbonylation of indolines with carbon monoxide for an expedient synthesis of pyrroloquinazolinediones, a structural motif with great potential in biologically active compounds, has been developed. Oxidation of the pyrroloquinazolinedione with 2,3‐dichloro‐5,6‐dicyano‐p‐benzoquinone (DDQ) could easily afford the corresponding indole‐based derivative in excellent yield.

     

Pipe flow of a dense emulsion: Homogeneous shear‐thinning or shear‐induced migration?

The flow field of a 70% concentrated noncolloidal o/w emulsion in a pipe has been investigated by means of Particle Image Velocimetry in a matched refractive index medium. At steady state and in laminar regime, the shape of axial velocity profiles is not parabolic and exhibits a shear‐thinning behavior of the dense emulsion, with a flow index of 0.5 and a negligible yield stress (less than 1 Pa). However, instead of a square root law, the pressure drop increases linearly with U_m. To explain this apparent inconsistency, two mechanisms of different nature are considered. The first originates from a possible relation between the consistency factor and the drop mean diameter. The second mechanism is shear‐induced migration and leads to the development of a concentration gradient in the pipe cross section. Both mechanisms considered reconcile the experimental data, the apparent local shear‐thinning behavior and the linear evolution of the pressure drop with the flow rate. © 2017 American Institute of Chemical Engineers AIChE J, 2017     

The trans‐10,cis‐15 18:2: a Missing Intermediate of trans‐10 Shifted Rumen Biohydrogenation Pathway?

The “trans-10 shifted” biohydrogenation pathway is frequently established in the rumen when high starch diets are fed to ruminants, resulting in the accumulation of trans-10 18:1 in ruminant products. It has been proposed that the “trans-10 shifted” biohydrogenation pathway of α-linolenic acid generates two intermediates, the trans-10,cis-15 18:2 and trans-10,cis-12,cis-15 18:3, although none of these have been found in the rumen. We analyzed digestive contents and meat samples from two trials, where animals were fed: a compound feed diet supplemented with 8 % oil blend containing linseed oil (samples A); and a forage based diet supplemented with 6 % linseed oil (samples B). The use of the new SLB-IL111 chromatographic column allowed the detection of two different 18:2 isomers in each sample trial, which could not be resolved when the CP-Sil 88 column is used. The two 18:2 isomers were characterized by mass spectrometry using 4,4-dimethyloxazoline derivatives. However, because they were subject to higher temperatures and present different chromatographic properties compared with the fatty acid methyl esters, we also used the “covalent adduct chemical ionization” technique to confirm the identity of both 18:2 isomers. We detected and identified the 10,15-18:2 in samples A and the 11,15-18:2 in samples B. The geometry of both isomers was tentatively assigned as trans,cis taking in account their elution order and biologic plausibility. As far as we know, this is the first time that the trans-10,cis-15 18:2 has been found in ruminant digestive contents and meat samples associated with the “trans-10 shifted” biohydrogenation pathway of α-linolenic acid.     

Iron‐Catalyzed C?N Cross‐Coupling of Sulfoximines with Aryl Iodides

An inexpensive and experimentally simple, iron‐catalyzed N‐arylation reaction of NH‐sulfoximines with aryl iodides is reported. This complementary method to the known palladium‐ and copper‐catalyzed ones features the use of a combination of environmentally friendly FeCl₃ and N,N′‐dimethylethylenediamine (DMEDA) as catalytic system and allows the efficient preparation of various N‐arylsulfoximines in high yields.     

Ruthenium‐Catalyzed Oxidative Annulation of 6‐Anilinopurines with Alkynes via C?H Activation: Synthesis of Indole‐Substituted Purines/Purine Nucleosides

Indole‐substituted purine nucleobases have been synthesized by Ru‐catalyzed oxidative annulation of 6‐anilinopurines with internal alkynes that involves C H activation. Unsymmetrical aryl(alkyl)alkynes led to high regioselectivity. The reaction was also successful with nucleosides by delivering unprotected indole‐substituted nucleosides. In the presence of [RuCl₂(p‐cymene)]₂ and copper(II) acetate hydrate [Cu(OAc)₂⋅H₂O], in some cases, we have observed two‐fold C H activation products that exhibit fluorescence. A ruthenacycle intermediate was characterized by crystallography, which suggests that the N‐1 nitrogen atom of the purine acts as a directing group for the present transformation.

     

“On Water” Direct and Site‐Selective Pd‐Catalysed C?H Arylation of (NH)‐Indoles

This communication describes the development of a versatile catalytic system based on palladium(II) acetate/bis(diphenylphosphino)methane [Pd(OAc)₂/dppm] that works “on water” giving site‐selective C H arylation of (NH)‐indoles without protecting or directing groups. Remarkably, the control of regioselectivity was achieved by small changes in the “extra‐catalytic” base/halide partners. These innovative methodologies allow a high‐yielding access to both C2 and C3‐arylindoles, as well as 2,3‐diarylindoles, and display high chemo/regioselectivities and structural versatility with regard to either indole or aryl moieties.