共查询到20条相似文献,搜索用时 0 毫秒
1.
Jian Zhang Aixue Li Xin Yu Weibo Guo Zhenhuan Zhao Jichuan Qiu Xiaoning Mou Jerome P. Claverie Hong Liu 《Advanced Materials Interfaces》2015,2(10)
The demand for a highly sensitive and stable DNA biosensor that can be used for implantable or on‐time monitoring is constantly increasing. In this work, for the first time graphene oxide (GO) sheets are synthesized in situ at the surface of graphite fibers to yield scaly GO/graphite fiber hybrid electrodes. The partially peeled GO sheets, directly connected with the graphite fibers, not only provide a large number of binding sites for single‐stranded DNA, but also favor high electron transfer rates from GO to the graphite fibers. Cyclic voltammetry (CV) confirms that the scaly GO/graphite fiber hybrid electrode has excellent electrochemical activity. As a working electrode in an electrochemical impedance DNA biosensor, the fiber hybrid electrode exhibits high selectivity, sensitivity, and stability. Due to its simplicity, low cost, high stability, small size, and unique microfiber morphology, the scaly GO/graphite fiber hybrid electrode is an excellent candidate for an implantable biosensor. The method developed here could have a profound impact on the design of GO‐based biosensors for DNA detection. 相似文献
2.
3.
4.
Congcong Zhang Pei Miao Mingyuan Sun Mei Yan Hong Liu 《Small (Weinheim an der Bergstrasse, Germany)》2019,15(38)
MicroRNAs (miRNAs) are short, endogenous, noncoding RNAs that play critical roles in physiologic and pathologic processes and are vital biomarkers for several disease diagnostics and therapeutics. Therefore, rapid, low‐cost, sensitive, and selective detection of miRNAs is of paramount importance and has aroused increasing attention in the field of medical research. Among the various reported miRNA sensors, devices based on graphene and its derivatives, which form functional supramolecular nanoassemblies of π‐conjugated molecules, have been revealed to have great potential due to their extraordinary electrical, chemical, optical, mechanical, and structural properties. This Review critically and comprehensively summarizes the recent progress in miRNA detection based on graphene and its derivative materials, with an emphasis on i) the underlying working principles of these types of sensors, and the unique roles and advantages of graphene materials; ii) state‐of‐the‐art protocols recently developed for high‐performance miRNA sensing, including representative examples; and iii) perspectives and current challenges for graphene sensors. This Review intends to provide readers with a deep understanding of the design and future of miRNA detection devices. 相似文献
5.
6.
7.
Isolated graphene, a nanometer‐thick two‐dimensional analog of fullerenes and carbon nanotubes, has recently sparked great excitement in the scientific community given its excellent mechanical and electronic properties. Particularly attractive is the availability of bulk quantities of graphene as both colloidal dispersions and powders, which enables the facile fabrication of many carbon‐based materials. The fact that such large amounts of graphene are most easily produced via the reduction of graphene oxide—oxygenated graphene sheets covered with epoxy, hydroxyl, and carboxyl groups—offers tremendous opportunities for access to functionalized graphene‐based materials. Both graphene oxide and graphene can be processed into a wide variety of novel materials with distinctly different morphological features, where the carbonaceous nanosheets can serve as either the sole component, as in papers and thin films, or as fillers in polymer and/or inorganic nanocomposites. This Review summarizes techniques for preparing such advanced materials via stable graphene oxide, highly reduced graphene oxide, and graphene dispersions in aqueous and organic media. The excellent mechanical and electronic properties of the resulting materials are highlighted with a forward outlook on their applications. 相似文献
8.
Eden Morales‐Narváez Arben Merkoçi 《Advanced materials (Deerfield Beach, Fla.)》2012,24(25):3298-3308
Since graphene exhibits innovative mechanical, electrical, thermal, and optical properties, this 2D material is increasingly attracting attention and is under active research. Among the various graphene forms with lattice‐like nanostructure, graphene oxide (GO) displays advantageous characteristics as a biosensing platform due to its excellent capabilities for direct wiring with biomolecules, a heterogeneous chemical and electronic structure, the possibility to be processed in solution and the ability to be tuned as insulator, semiconductor or semi‐metal. Moreover, GO photoluminescences with energy transfer donor/acceptor molecules exposed in a planar surface and is even proposed as a universal highly efficient long‐range quencher, which is opening the way to several unprecedented biosensing strategies. Here, the rationale behind the use of GO in optical biosensing applications is discussed by describing different potentially exploitable properties of GO, and an overview of the current approaches are presented along with future perspectives and challenges. 相似文献
9.
10.
11.
Self‐Powered Photoelectrochemical Biosensor Based on CdS/RGO/ZnO Nanowire Array Heterostructure 下载免费PDF全文
Kun Zhao Xiaoqin Yan Yousong Gu Zhuo Kang Zhiming Bai Shiyao Cao Yichong Liu Xiaohui Zhang Yue Zhang 《Small (Weinheim an der Bergstrasse, Germany)》2016,12(2):245-251
A CdS/reduced graphene oxide (RGO)/ZnO nanowire array (NWAs) heterostructure is designed, which exhibits enhanced photoelectrochemical (PEC) activity compared to pure ZnO, RGO/ZnO, and CdS/ZnO. The enhancement can be attributed to the synergistic effect of the high electron mobility of ordered 1D ZnO NWAs, extended visible‐light absorption of CdS nanocrystals, and the formed type II band alignment between them. Moreover, the incorporation of RGO further promotes the charge carrier separation and transfer process due to its excellent charge collection and shuttling characteristics. Subsequently, the CdS/RGO/ZnO heterostructure is successfully utilized for the PEC bioanalysis of glutathione at 0 V (vs Ag/AgCl). The self‐powered device demonstrates satisfactory sensing performance with rapid response, a wide detection range from 0.05 mm to 1 mm , an acceptable detection limit of 10 μm , as well as certain selectivity, reproducibility, and stability. Therefore, the CdS/RGO/ZnO heterostructure has opened up a promising channel for the development of PEC biosensors. 相似文献
12.
13.
14.
15.
16.
Junyao Li Hang Heng Jianlin Lv Tingting Jiang Zhaoyin Wang Zhihui Dai 《Small (Weinheim an der Bergstrasse, Germany)》2019,15(48)
Fabrication of high‐performance surface‐enhanced Raman scattering (SERS) biosensors relies on the coordination of SERS substrates and sensing strategies. Herein, a SERS active AuCu alloy with a starfish‐like structure is prepared using a surfactant‐free method. By covering the anisotropic AuCu alloy with graphene oxide (GO), enhanced SERS activity is obtained owing to graphene‐enhanced Raman scattering and assembly of Raman reporters. Besides, stability of SERS is promoted based on the protection of GO to the AuCu alloy. Meanwhile, it is found that SERS activity of AuCu/GO can be regulated by DNA. The regulation is sequence and length dual‐dependent, and short polyT reveals the strongest ability of enhancing the SERS activity. Relying on this phenomenon, a SERS biosensor is designed to quantify apurinic/apyrimidinic endonuclease 1 (APE1). Because of the APE1‐induced cycling amplification, the biosensor is able to detect APE1 sensitively and selectively. In addition, APE1 in human serum is analyzed by the SERS biosensor and enzyme‐linked immunosorbent assay (ELISA). The data from the SERS method are superior to that from ELISA, indicating great potential of this biosensor in clinical applications. 相似文献
17.
Alexandre Felten Benjamin S. Flavel Liam Britnell Axel Eckmann Pierre Louette Jean‐Jacques Pireaux Michael Hirtz Ralph Krupke Cinzia Casiraghi 《Small (Weinheim an der Bergstrasse, Germany)》2013,9(4):631-639
An experimental study on the interaction between the top and bottom layer of a chemically functionalized graphene bilayer by mild oxygen plasma is reported. Structural, chemical, and electrical properties are monitored using Raman spectroscopy, transport measurements, conductive atomic force microscopy and X‐ray photoelectron spectroscopy. Single‐ and double‐sided chemical functionalization are found to give very different results: single‐sided modified bilayers show relatively high mobility (200–600 cm2 V?1 s?1 at room temperature) and a stable structure with a limited amount of defects, even after long plasma treatment (>60 s). This is attributed to preferential modification and limited coverage of the top layer during plasma exposure, while the bottom layer remains almost unperturbed. This could eventually lead to decoupling between top and bottom layers. Double‐sided chemical functionalization leads to a structure containing a high concentration of defects, very similar to graphene oxide. This opens the possibility to use plasma treatment not only for etching and patterning of graphene, but also to make heterostructures (through single‐sided modification of bilayers) for sensors and transistors and new graphene‐derivatives materials (through double‐sided modification). 相似文献
18.
Tailored Crumpling and Unfolding of Spray‐Dried Pristine Graphene and Graphene Oxide Sheets 下载免费PDF全文
Dorsa Parviz Shane D. Metzler Sriya Das Fahmida Irin Micah J. Green 《Small (Weinheim an der Bergstrasse, Germany)》2015,11(22):2661-2668
For the first time, pristine graphene can be controllably crumpled and unfolded. The mechanism for graphene is radically different than that observed for graphene oxide; a multifaced crumpled, dimpled particle morphology is seen for pristine graphene in contrast to the wrinkled, compressed surface of graphene oxide particles, showing that surface chemistry dictates nanosheet interactions during the crumpling process. The process demonstrated here utilizes a spray‐drying technique to produce droplets of aqueous graphene dispersions and induce crumpling through rapid droplet evaporation. For the first time, the gradual dimensional transition of 2D graphene nanosheets to a 3D crumpled morphology in droplets is directly observed; this is imaged by a novel sample collection device inside the spray dryer itself. The degree of folding can be tailored by altering the capillary forces on the dispersed sheets during evaporation. It is also shown that the morphology of redispersed crumpled graphene powder can be controlled by solvent selection. This process is scalable, with the ability to rapidly process graphene dispersions into powders suitable for a variety of engineering applications. 相似文献
19.
20.
Light and Atmosphere Affect the Quasi‐equilibrium States of Graphite Oxide and Graphene Oxide Powders 下载免费PDF全文
Graphite oxide (GiO) and graphene oxide (GeO) possess wide applicability in technological devices. The exact chemical compositions, structures, and properties of these materials remain vague to the graphene community despite being heavily researched. As metastable materials, the properties of GiO and GeO are easily manipulated under various conditions of temperature, light, and atmosphere. Although these aspects are important considerations for long‐term storage of the materials, they are not well understood. In this experimental work, investigations are performed to determine how light and atmosphere contribute to the characteristics of GiO and GeO powders. The study shows that, at room‐temperature, the quasi‐equilibrium states of both materials, in specific the O/C ratios, vary according to the storage conditions. Drastic disparities between GiO and GeO are observed. GiO kept away from light and GeO kept under inert atmosphere maintain relatively high O/C ratios. As the metastable states of the materials are governed by the diffusion of oxygen functionalities, the presence of epoxide groups diminishes while negligible changes occur to the sp2 lattice size. This experimental work lays out fundamental aspects that govern the stability of frequently mass‐produced GiO and GeO powders under different environments, with major implications on their optimal storage conditions. 相似文献