Potentiality of the porous geopolymer sphere in adsorption of Pb (II) from aqueous solutions: Behaviors and mechanisms

In this study, a porous geopolymer sphere (PGS) was developed that comprised a mixture of coal gasification fly ash, steel slag, metakaolin and an alkaline activator (SiO₂/Na₂O molar ratio = 1.33) (44.89 wt%, 20.10 wt%, 2.01 wt% and 33 wt%) using an 8.5 wt% hydrogen peroxide foaming agent. The micro characteristics of the PGS were tested using X-ray CT, BET, XRD, and FT-TR. The mechanism to Pb adsorption was revealed via adsorption isotherm, adsorption kinetics, thermodynamics, and adsorbent characterization. Results indicated that the PGS was a mesoporous structure (the most accessible pore sizes was 9.31 nm) and the main crystalline phases in the PGS were ZK-5 zeolite, vaterite, calcium silicate, and wustite. Batch experiments showed that the adsorption of Pb by the PGS was best described by pseudo-second-order kinetics and the Langmuir isotherm model, indicating that the adsorption process was dominated by chemical adsorption. Moreover, the maximum adsorption capacity of the PGS could reach 59.31 mg/g. The mechanism of Pb(II) adsorption using the PGS mainly involves: (1) ion exchange, (2) a complexation reaction between Pb and the PGS, (3) lattice immobilization of Pb and in the ZK-5 zeolite and zeolite-like phase, (4) physical adsorption by the PGS.     

Regeneration of spent bleaching earth and its adsorption of copper (II) ions from aqueous solutions

This study was designed to provide a comprehensive investigation into heat and acid reactivation of spent bleaching earth (SBE) and adsorption of Cu(II) ions from aqueous solutions. Heat treatment was the master variable in SBE regeneration. Dilute acid treatment did not constitute an effective SBE reactivation protocol for this purpose. Solvent extraction of residual oil using excess methylethyl ketone followed by heating at 370 °C was, therefore, the most effective reactivation procedure. Highly adsorptive materials with > 98% removal of Cu(II) ions from solution were obtained. Thus, > 80% Cu adsorption was reversible at SBE silicate sites because of their higher proportion in the adsorbent.     

Reduction of nitroaromatics with poly(vinylpyridine) complexes of palladium(II) and platinum(II)

Palladium(II) and platinum(II) anchored to 2- and 4-vinylpyridine polymers of different molecular weights were used for the dihydrogen reduction of various nitroaromatics and benzaldehyde in ethanol at 50°C. Palladium(II) complexes were far more effective than their platinum(II) analogues and the activity decreased with increasing molecular weights of the polymers. The nitroaromatics were selectively and almost completely reduced to the corresponding anilines. During reduction, the orange palladium(II) complexes changed to voluminous green precipitates, which could be used repeatedly and preserved for a long time without any loss of activity. A rate equation of the type: rate = K[Cat] [H₂] has been derived and a reduction mechanism has been proposed on the basis of experimental results and kinetic data.     

Adsorption of Hg(Ⅱ) from aqueous solution using thiourea functionalized chelating fiber

A fast and selective adsorbent for Hg(II) from aqueous solutions using thiourea(TU) functionalized polypropylene fiber grafted acrylic acid(PP-g-AA),PP-g-AA-TU fibers,was characterized by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy.The adsorption behavior of the functionalized chelating fibers for Hg(II) was investigated by static adsorption experiments,and the effects of some essential factors on adsorption of Hg(II) were examined,such as pH,initial concentration,adsorption time,coexisting cations,and temperature.The results showed that the adsorptive equilibrium could be achieved in 10 min,and the equilibrium adsorption quantity of PP-g-AA-TU fibers was 20 times that of PP-g-AA fibers.The PP-g-AA-TU fibers showed a very high adsorption rate and a good selectivity for Hg(II) over a wide range of p H.The adsorption isotherm can be well described with Langmuir model,with the maximum adsorption capacity for Hg(II) up to52.04 mg·g~(-1)and the removal of Hg(II) more than 97%.The kinetic data indicate that the adsorption process is best-fitted into the pseudo-second-order model.     

Mercury (II) adsorption by activated carbon made from sago waste

The preparation of activated carbon (AC) from sago industry waste is a promising way to produce a useful adsorbent for Hg (II) removal, as well as dispose of sago industry waste. The AC was prepared using sago industry waste with H₂SO₄ and (NH₄)₂S₂O₈ and physico-chemical properties of AC were investigated. Adsorptive removal of mercury (II) from aqueous solution onto AC prepared from sago industry waste has been studied under varying conditions of agitation time, metal ion concentration, adsorbent dose, particle size and pH to assess the kinetic and equilibrium parameters. Adsorption equilibrium was obtained in 105 min for 20 mg l⁻¹ and 120 min for 30, 40, and 50 mg l⁻¹ Hg (II) concentrations. The Langmuir and Freundlich equilibrium isotherm models were found to provide an excellent fitting of the adsorption data, with r² 0.9999 and 0.9839, respectively. The adsorption capacity of Hg (II) (Q_o) obtained from the Langmuir equilibrium isotherm model was found to be 55.6 mg g⁻¹ at pH 5.0 for the particle size range of 125-250 μm. The percent removal increased with an increase in pH from 2 to 10. This adsorbent was found to be effective and economically attractive.     

Poly(o-toluidine) as the matrix for incorporation of palladium species from PdCl2 aqueous solutions

Reactivity of poly(o-toluidine) in the emeraldine base form (POT) and protonated with HCl (POT/HCl) in PdCl₂ aqueous solutions of various HCl concentrations has been studied. Using elemental analysis, FTIR, UV–Vis, XPS and EXAFS spectroscopies as well as XRD and SEM it has been established that POT/HCl is more reactive than POT. The course of reactions is influenced by the type of the PdCl₂ solution. Thus, protonation of POT with incorporation of palladium (II) chloro–and/or aquachloro–and/or chlorohydroxycomplexes counterions is the main process occurring in the PdCl₂ solutions of higher HCl concentration. A redox reaction resulting in the oxidation of the polymer chain with simultaneous formation of metallic palladium takes place in the PdCl₂ solution of lower HCl concentration. POT/HCl shows enhanced reducing properties with respect to POT. Lowering of the protonation level (i.e. some deprotonation) of POT/HCl has been also observed. Coordination of palladium (II) ions by nitrogen atoms of the polymer chain can be also postulated.     

Kinetic and thermodynamic studies on the removal of Cu(II) ions from aqueous solutions by adsorption on modified sand

Studies on the removal of copper by adsorption on modified sand have been investigated. The adsorbent was characterized by XRD, FTIR and SEM. Removal of Cu was carried out in batch mode. The values of thermodynamic parameters namely ΔG⁰, ΔH⁰ and ΔS⁰ at 25 °C were found to be −0.230 kcal⁻¹ mol⁻¹, +4.73 kcal⁻¹ mol⁻¹ and +16.646 cal K⁻¹ mol⁻¹, respectively. The process of removal was governed by pseudo second order rate equation and value of k₂ was found to be 0.122 g mg⁻¹ min⁻¹ at 25 °C. The resultant data can serve as baseline data for designing treatment plants at industrial scale.     

Removal of Cd(II) and Cu(II) from aqueous solutions using mesoporous silicate containing zirconium and iron

The present work elucidates an environmental friend by process for heavy metals removal from aqueous solutions using mesoporous silicate, containing zirconium and iron. The process comprises the three following steps: (1) synthesis and characterization of mesoporous silicate bed (the prepared adsorbent materials were characterized by powder X-ray diffraction, nitrogen isotherms, FTIR, TGA, and SEM). (2) Evaluation of the efficiency of this new adsorption bed for Cu and Cd removal from aqueous solutions. (3) Study of metal concentration (50-1000 ppm), stirring time (0.5-5 h) and pH (1.5-12) effects on the adsorption power using batch techniques. Results obtained indicate that under optimum conditions, pH in the vicinity of 5-6, Zr-M has the maximum adsorption capacity for both cations Cu and Cd. On the other hand, ZrFe-M1 containing a higher molar ratio of iron showed lower adsorption capacity for the cations Cu and Cd.     

Effect of ZnO loading to activated carbon on Pb(II) adsorption from aqueous solution

The effect of zinc oxide loading to granular activated carbon on Pb(II) adsorption from aqueous solution was studied in comparison with zinc oxide particles and oxidized activated carbon. Cu(II), Cd(II) and nitrobenzene were used as reference adsorbates to investigate the adsorption. The BET surface area and point of zero charge (pH_PZC) in the aqueous solution were measured for the adsorbents. The adsorption isotherms were examined to characterize the adsorption of heavy metals and organic molecules. The heavy metal adsorption was improved by both the zinc oxide loading and the oxidation of activated carbon. In contrast, the adsorption of nitrobenzene was considerably reduced by the oxidation, and slightly decreased by the zinc oxide loading. The zinc oxide loading to the activated carbon was found to be effectively used for the Pb(II) adsorption whereas only a part of surface functional groups was used for the zinc oxide particles and the oxidized activated carbon. From the experimental results, the surface functional groups responsible for the Pb(II) adsorption on the zinc oxide loaded activated carbon were considered to be hydroxyl groups that formed on the oxide, while those on the oxidized activated carbon were considered to be carboxylic groups.     

Sulfonated multi-walled carbon nanotubes for the removal of copper (II) from aqueous solutions

Sulfonated multi-walled carbon nanotubes (s-MWCNTs) was prepared from purified multi-walled carbon nanotubes (p-MWCNTs) by concentrated H₂SO₄ at elevated temperature. The structure was characterized by SEM, FTIR, Raman, XPS, and BET. It could be dispersed steadily in water at a dosage of 1.0 mg/mL for a week. The adsorption performance of s-MWCNTs toward Cu(II) was investigated including the effects of pH and ionic strength. Results indicated the adsorption was much dependent on pH but not on ionic strength. The adsorption capacity for Cu(II) was enhanced 58.9% via the sulfonation. Moreover, the adsorption mechanisms were carefully analyzed by Freundlich and D-R models.     

Ion exchange characteristics of palladium from nitric acid solution by anion exchangers

Radioactive high-level liquid wastes contain significant quantities of platinum group metals (PGM) such as Pd(II), Rh(III) and Ru(III). The PGM are produced as fission products in nuclear reactors. In this study, batch and column experiments were carried out to investigate the ion exchange characteristics of Pd(II), including the effects of the ionic group of ion exchangers, solution temperature, and the concentration of nitric acid by various anion exchangers such as IRN 78 and Dowex 1×8 and also the elution characteristics of Pd(II) by various eluents for the determination of optimal separation conditions. Anion exchangers such as Dowex 1x8 with the ionic group of quaternary methyl ammonium showed a higher capacity than anion exchangers such as IRN 78 with amine group for the adsorption of Pd(II) from nitric acid solution. The optimal nitric acid concentration was shown to be in 2–3 M. The adsorbed Pd(II) was effectively eluted out by 0.5 M thiourea and 0.1 M nitric acid mixed solution.     

Zn2+-imprinted porous polymer beads: Synthesis,structure, and selective adsorption behavior for template ion

Zn²⁺-imprinted polymer was synthesized in porous spherical forms via a self-assembled complex between 2,2′-bipyridyl/4-vinylpyridine complexant/functional monomer and Zn²⁺ template ion. Diameters of particles ranged from 250 to 550 μm to enlarge the surface area and thus enhance the adsorption capacity. The presence/absence of the template ion in the preparation of the imprinted polymer was confirmed by EDX spectroscopy, and the physical structure of the particles was investigated using ESEM and BET analysis. The particle and the pore size were controlled by the cross-linker/monomer feed ratio. The adsorption capacity of the imprinted polymers was 210.61 μmol g^?1 for Zn²⁺, while those for Cu²⁺, Ni²⁺, and Pb²⁺, were 37.92 μmol g^?1, 33.02 μmol g^?1, and 9.70 μmol g^?1, respectively. This big discrepancy of the adsorption capacities illustrates the excellent separation selectivity of the imprinted polymers. The adsorption capacity decreased significantly at pH below 4.5, as the polymers are easily protonated. The imprinted particles lost only 10 % of their adsorption ability after 10 repeated uses.     

Enhanced removal of nickel(II) ions from aqueous solutions by SDS-functionalized graphene oxide

In this paper, a one-pot and easy-to-handle method at room temperature without additional chemicals for the modification of graphene oxide (GO) with surfactant is found. Removal of nickel (II) ions from aqueous solutions by GO and surfactant (sodium dodecyl sulphate) modified graphene oxide (SDS-GO) was studied spectrophotometrically at room temperature as a function of time, initial concentration and pH. Adsorption capacity of the adsorbent was increased dramatically (from 20.19 to 55.16 mg/g found by Langmuir model) due to the functionalization of the surface by SDS. The driving force of the adsorption of Ni(II) ions is electrostatic attraction and Ni(II) ions adsorbed on the GO surface chemically besides ion exchange.     

Sorption of palladium on carbon adsorbents from nitric acid solutions

Sorption recovery of palladium from nitric acid solutions on carbon adsorbents BAU, LKAU-7, ABG and UC has been investigated using model solutions with concentrations 8 × 10⁻⁴–8 × 10⁻³ mol/l for palladium and 1, 2 and 5 mol/l for nitric acid. The recovery degrees of Pd(II) depend on the concentration of palladium in contacting solutions as well as on the type of sorbent used. On average, they reach 60%–100% with the maximum in 1 M HNO₃ The palladium desorption by 10% thiocarbamide solution in 1M H₂SO₄ proceeds completely for the sorbent LKAU-7. The use of thiocarbamide solutions in 0.1 M NaOH increases the desorption of palladium from the sorbents BAU and UC up to 80%–85%     

Mannich反应制备胺基树脂及由其制备的螯合树脂的吸附性能初探

以乙酰化聚苯乙烯微球为原料经非均相Mannich反应制备了胺基树脂,氮含量可达13．1mmol／g。由该胺基树脂制备了氨基羧酸型树脂(AC)和氨基膦酸型鳌合树脂(AP),采用静态吸附法,测试了两种鳌合树脂对Cu^2 、Zn^2 、Ni^2 的吸附性能。结果表明：AP树脂对Cu^2 、Ni^2 的鳌合容量较高,分别达到1．1mmol／g、0．69mmol／g,AC树脂对Zn^2 的吸附容量最高,达到1．35mmol／g。     

Removal of Cu(II) from aqueous solutions by recycled tire rubber

A batch adsorption system was applied to study the adsorption of Cu(II) ions from aqueous solutions by crumb rubber. The effects of pH ranging from 1.5 to 7.0, contact time ranging from 6 to 96 h and initial metal concentration ranging from 1 mg L^− 1 to 50 mg L^− 1 on the removal of Cu(II) were studied. Results show that adsorption of Cu(II) is pH-dependent and the best results are obtained at pH = 6.0. Results also show that copper uptake is accompanied by displacement of zinc and therefore probably involves an ion exchange type mechanism. Langmuir and Freundlich adsorption models were applied to describe the isotherms and isotherm constants. Equilibrium data agreed very well with the Langmuir model. Results clearly show that crumb rubber is an effective adsorbent for the removal of Cu(II) from aqueous solutions.     

Preparation of chemically active mesoporous adsorbent for pt(II) and pd(II) adsorption from aqueous solutions

Chemically active mesoporous silica was prepared via grafting of N-(3-triethoxysilylpropyl)-4,5-dihydroimidazole. Binding behavior of the adsorbent toward Pt(II) and Pd(II) ions was investigated. In addition, the properties of the adsorbent, such as pore structure and pore uniformity, were also examined. Results showed that the adsorbents developed in this study have high affinity for noble metal ions, such as Pt(II) and Pd(II), in aqueous solutions. This paper is dedicated to Professor Wha Young Lee on the occasion of his retirement from Seoul National University.     

Effective adsorption of phenolic compounds by functional group modified resins: behavior and mechanism

A series of functional hyper-crosslinked resins were successfully synthesized by incorporating amino, hydroxyl, and complex functional groups into post-crosslinked polymer. Possessing high specific surface area and effective functional groups, the newly synthesized resins showed excellent adsorption capacity toward various phenolic compounds. HC-IT displayed huge advantage over the others. Its adsorption capacity for salicylic acid was up to 336 mg/g, which was 3.01–6.64 times higher than that of the commercial resins and 2.33 times higher than its non-functionalized precursor HCLR (144 mg/g). The improved adsorption capacity was attributed to its high specific surface area, good polarity, and proper pore structure.     

Studies on the removal of Cobalt(II) from aqueous solutions by adsorption with Ficus benghalensis leaf powder through response surface methodology

Suitability of Ficus benghalensis leaf powder for the adsorptive removal of Cobalt(II) from aqueous solutions is exhaustively studied and is reported in this article. Experimentation based on response surface methodology is conducted to understand the interaction among the variables—metal ion concentration, adsorbent dosage, initial solution pH and temperature that are of significance in the treatment. A 20?mg?L^?1 of Cobalt(II) solution, treated with 25?g?L^?1 of adsorbent at a pH of 5.0 and a temperature of 303?K, yielded 98.73% removal of Cobalt(II). Langmuir isotherm proved to be a better model representation of the equilibrium. Adsorption kinetics is of pseudo second rate form. Maximum sorption capacity of F. benghalensis leaf powder, q_max, is found to be 5.65?mg?g^?1. Adsorption is endothermic and spontaneous in nature. Study on surface morphology is included in the study.     

Calcined tetrabutylammonium kaolinite and montmorillonite and adsorption of Fe(II), Co(II) and Ni(II) from solution

Kaolinite and montmorillonite were modified with tetrabutylammonium (TBA) bromide, followed by calcination. The structural changes were monitored with XRD, FTIR, surface area and cation exchange capacity measurements. The modified clay minerals were used for adsorption of Fe(III), Co(II) and Ni(II) ions from aqueous solution under different conditions of pH, time and temperature. The uptake of the metal ions took place by a second order kinetics. The modified montmorillonite had a higher adsorption capacity than the corresponding kaolinite. The Langmuir monolayer capacities for the modified kaolinite and montmorillonite were Fe(III): 9.3 mg g^− 1 and 22.6 mg g^− 1; Co(II): 9.0 mg g^− 1 and 22.3 mg g^− 1; and Ni(II): 8.4 mg g^− 1 and 19.7 mg g^− 1. The modified kaolinite interacted with Co(II) in an endothermic manner, but all the other interactions were exothermic. The decrease of the Gibbs energy in all the cases indicated spontaneous adsorption.