Local Structural Rearrangements and Evolution of Relaxor State in the Complex Perovskite (Ba1−xPbx) (In0.50Nb0.50) O3

Local structural rearrangements in lead‐based complex perovskites of the type (Ba_1?xPb_x)(In_0.50Nb_0.50)O₃ responsible for transition from ferroelectric [Ba(In_0.50Nb_0.50)O₃] to relaxor [Pb(In_0.50Nb_0.50)O₃] are examined by careful analysis of their Raman spectra. Subtle changes in the bonding brought about by the differences in the chemical nature of A‐ and B‐site cations have been correlated with the dynamic A–O–B coupling. Deviations in the local structure as a result of such bonding preferences have been confirmed by studying the changes in the Raman spectra when Nb⁵⁺ is substituted by Sn⁴⁺ as the third B‐site cation.     

Temperature‐insensitive piezoelectricity in lead‐free NaNbO3‐based ceramics

In this work, we report a lead‐free piezoelectric ceramic of (0.9‐x)NaNbO₃‐0.1BaTiO₃‐xBaZrO₃, and the effects of BaZrO₃ on the phase structure, microstructure, electrical properties and temperature stability are investigated. A morphotropic phase boundary‐like region consisting of rhombohedral (R) and tetragonal (T) phases is constructed in the compositions with x = 0.035‐0.04. More importantly, in situ temperature independence of the piezoelectric effect {piezoelectric constant (d₃₃) and strain} can be achieved below the Curie temperature (T_c). Intriguingly, the electric field‐induced strain is still observed at T ≥ T_c due to the combined actions of the electrostrictive effect and the electric field‐induced phase transition. We believe that NaNbO₃‐based ceramics of this type have potential for applications in actuators and sensors.     

Synthesis of α‐Arylphosphonates using Copper‐Catalyzed α‐Arylation and Deacylative α‐Arylation of β‐Ketophosphonates

Efficient methods for the direct arylation and deacylative arylation of β‐ketophosphonates with iodoarenes in presence of a copper(I) or a copper(II) salt as the catalysts have been developed. The corresponding α‐arylphosphonates were obtained in high yields. A tentative mechanism for the deacylative arylation reaction was proposed on the basis of the experimental data.     

Systematic study of structure and piezoelectric properties of Pb(Ni1/3Nb2/3)O3-PbTiO3 by in situ synchrotron diffraction

Lead-based ferroelectric materials are extensively employed in industrial applications and everyday life due to their excellent ferroelectric and piezoelectric performance. Pb(Ni_1/3Nb_2/3)O₃-PbTiO₃ (PNN-PT) is a typical binary relaxor ferroelectric system, whose refined structure and piezoelectric properties have not been systematically investigated. In this study, evolution of electric field-based crystal structure and variation of ferroelectric, piezoelectric, as well as dielectric properties with composition and temperature of (1 − x)PNN-xPT (0.32 ≤ x ≤ 0.36) ceramics were studied in full detail. The optimal performance is obtained at 0.66PNN-0.34PT with maximum piezoelectric coefficient d₃₃ of 560 pC/N and large dielectric constant of 28 684. In situ high-energy synchrotron diffraction was employed to determine structural origins of enhanced properties of 0.66PNN-0.34PT. Interestingly, crystal structure of poled 0.66PNN-0.34PT ceramic is determined to be single monoclinic phase. Furthermore, both its lattice parameters and volume variation present butterfly shape under electric field. It is demonstrated that macroscopic strain of 0.66PNN-0.34PT stems mainly from intrinsic structure. The present study provides evidence for the relationship between microstructure and macroscopic properties, which is beneficial to the design of new materials with piezoelectric properties.     

Synthesis of γ‐Fluoro‐α, β‐unsaturated Carboxylic Esters from Saturated α‐Fluoro Aldehydes

γ‐Fluoro‐α, β‐unsaturated carboxylic esters 7a, 7b and 7d and 4‐fluoro‐4‐phenylbut‐3‐enoic ester ( 8 ) are obtained by two alternative pathways from 2‐fluoro aldehydes 5a—d , either by Horner—Wadsworth—Emmons reaction or by Wittig reaction. The aldehydes 5a—d are prepared by Swern oxidation of the corresponding fluorohydrins 4a—d . These are available from α‐olefins by bromofluorination, bromineby‐acetate replacement and subsequent hydrolysis.     

Large electrocaloric effect with ultrawide temperature span in Na1/2Bi1/2TiO3-based lead-free ceramics

Innovative cooling technologies are recognized by many industries as a crucial part of their system design. A large electrocaloric effect (ECE) and extended working temperature are the key issues hindering the realization of electrocaloric refrigeration technology. In this work, large ECE (ΔT = 0.8–0.9°C @ 4 kV/mm) with an ultrawide temperature span from 30 to 120°C is noted for lead-free (Na_1/2Bi_1/2)_0.80Sr_0.20(Zn_1/3Nb_2/3)_xTi_1-xO₃ ceramics. The excellent ECE performance can be ascribed to the evolution of polar nanoregions. Our work suggests that this material is promising for applications in solid-state refrigeration systems with a broad range of operating temperatures.     

Enhanced Photovoltaic Effect in Fe‐Doped (Bi,Na) TiO3‐BaTiO3 Ferroelectric Ceramics

In this study, the photovoltaic (PV) effect in Fe‐doped (Bi_0.5Na_0.5)TiO₃‐0.06BaTiO₃ (BNBT) ceramics was investigated. It was found that the bandgap of BNBT is successfully narrowed through Fe doping and a substantially enhanced photovoltaic response was obtained in Fe‐doped BNBT. Density functional theory calculations show that the enhanced PV response can be attributed to the dopant, which introduces localized intermediate states within the band gap as well as a strong asymmetry of the projections of the responsible Fe‐Ti bond length on the c‐axis.     

Large electrocaloric responses in [Bi1/2(Na,K)1/2]TiO3‐based ceramics with giant electro‐strains

The electrocaloric effect (ECE) is investigated through indirect measurement in two lead‐free [Bi_1/2(Na,K)_1/2]TiO₃‐based ceramics that were previously reported to display giant electro‐strains. In the Nb‐doped ceramic, denoted as BNKT‐2.5Nb, a decent temperature change of ΔT=1.85 K and an electrocaloric responsivity of ΔT/ΔE=0.37 (10^?6Km V^?1) are found around room temperature (32°C). While in the Ta‐doped ceramic, BNKT‐1.5Ta, a wide operation temperature range (T_span ~55 K) is observed near room temperature. Additional electrical measurements, as well as transmission electron microscopy experiments, are performed to identify the mechanisms of the ECE in both ceramics.     

Re‐entrant relaxor behavior in BaTiO3‐Bi(Zn2/3Nb1/3)O3 ceramics

The (1?x)BaTiO₃?xBi(Zn_2/3Nb_1/3)O₃ (x=0.10‐0.25) ceramics were fabricated via solid‐state reactions. Temperature‐dependent polarization measurement reveals that with the temperature lowering, the remnant polarization increases till a maximum value before it decreases, showing a reentrant phenomenon. Absence of apparent switching current peaks in the current density as a function of electric field should indicate the lack of a ferroelectric transition, which is further verified by the consistent macroscopic phase structure from the Raman spectra. An anomalous peak in the full width at half maximum of a deconvoluted mode at ~515 cm^?1 suggests the entering of a more disordered state of dipolar dynamics, which may be originated from the competition between the freezing of polar nanoregions and the random interacting fields.     

A General Synthesis of α‐Trifluoromethylstyrenes through Palladium‐Catalyzed Cross‐Couplings with 1,1,1‐Trifluoroacetone Tosylhydrazone

1,1,1‐Trifluoroacetone tosylhydrazone is presented as a very convenient substrate for the palladium‐catalyzed cross‐coupling with aryl halides. Under the proper reaction conditions, 3,3,3‐trifluoromethylstyrenes – very valuable trifluoromethylated synthetic intermediates – are obtained with high yields. The reaction features a very wide scope, as the presence of most functional groups is tolerated. Moreover, the reaction has been extended to substituted trifluoromethylstyrenes by employing substituted tosylhydrazones derived from other trifluoromethyl ketones.

     

Enhanced piezoelectric properties and electrocaloric effect in novel lead‐free (Bi0.5K0.5)TiO3‐La(Mg0.5Ti0.5)O3 ceramics

The crystal structure, electromechanical properties, and electrocaloric effect (ECE) in novel lead‐free (Bi_0.5K_0.5)TiO₃‐La(Mg_0.5Ti_0.5)O₃ ceramics were investigated. A morphotropic phase boundary (MPB) between the tetragonal and pseudocubic phase was found at x = 0.01‐0.02. In addition, the relaxor properties were enhanced with increasing the La(Mg_0.5Ti_0.5)O₃ content. In situ high‐temperature X‐ray diffraction patterns and Raman spectra were characterized to elucidate the phase transition behavior. The enhanced ECE (ΔT = 1.19 K) and piezoelectric coefficient (d₃₃ = 103 pC/N) were obtained for x = 0.01 at room temperature. Meanwhile, the temperature stability of the ECE was considered to be related to the high depolarization temperature and relaxor characteristics of the Bi_0.5K_0.5TiO₃‐based ceramics. The above results suggest that the piezoelectric and ECE properties can be simultaneously enhanced by establishing an MPB. These results also demonstrate the great potential of the studied systems for solid‐state cooling applications and piezoelectric‐based devices.     

Ene‐Carbonyl Reductive Coupling for the Synthesis of 3,3‐Disubstituted Phthalide, 3‐Hydroxyisoindolin‐1‐one and 3‐Hydroxyoxindole Derivatives

An efficient method for the synthesis of three classes of heterocyclic derivatives such as 3,3‐disubstituted phthalides, 3‐hydroxyisoindolin‐1‐ones and 3‐hydroxyoxindoles, is reported. In the presence of the simple reductive system, zinc (Zn)/ammonia (NH₃) [or zinc‐copper (Zn‐Cu)/ammonia], a wide range of alkenes including acrylates, acrylonitrile, acrylamide and vinyl sulfoxide underwent reductive coupling with methyl 2‐acylbenzoates and subsequent lactonization to provide 3,3‐disubstituted phthalides in good to high yields at ambient temperature. In a similar manner, 3‐hydroxyisoindolin‐1‐one and 3‐hydroxyoxindole derivatives could also be easily prepared by direct reductive coupling of phthalimides and N‐substituted isatins with activated alkenes, respectively. Application of this methodology towards the synthesis of 1‐naphthol derivatives on a gram scale is also depicted. Furthermore, the intramolecular phthalimides–ene reductive coupling afforded the respective cyclization products with high diastereoselectivity.

     

α‐ and β‐Stannyl Trifluoromethylbutenoates: Regioselective Preparation and Use in Copper(I)‐Catalyzed Allylation and Propargylation Reactions

The palladium‐free hydrostannylation of ethyl 4,4,4‐trifluorobutynoate 1 with tributyltin hydride at room temperature is highly regio‐ and stereoselective, providing good yields of β‐trifluoromethyl (Z)‐α‐ or (Z)‐β‐stannylacrylates 2 . Vinylstannanes 2 undergo a copper(I)‐catalyzed coupling reactions with allylic or propargylic bromides leading selectively to good yields of the corresponding allylated or propargylated products without allylic or allenic transposition.     

Synthesis and characterization of phenylsiloxane‐modified bismaleimide/barbituric acid‐based polymers with 3‐aminopropyltriethoxysilane as the coupling agent

The preparation and characterization of phenylsiloxane (PhSLX)‐modified N,N′‐bismaleimide‐4,4′‐diphenylmethane (BMI)/barbituric acid (BTA) (10/1 mol/mol) oligomers are described. 3‐Aminopropyltriethoxysilane (APTES) was used as the coupling agent. The resultant hybrid BMI/BTA‐APTES‐PhSLX polymers were characterized primarily using thermogravimetric analysis in combination with differential scanning calorimetry and Fourier transform infrared measurements. The thermal stability of the BMI/BTA oligomer was improved significantly by incorporation of a small amount (20–30 wt%) of the copolymer of PhSLX and APTES (PASi). After adequate post‐curing reactions, the PASi‐modified BMI/BTA oligomers (HYBRID20 and HYBRID30 containing 20 and 30 wt% PASi, respectively) exhibited greatly reduced thermal degradation rates in the temperature range 300–800 °C and an increased level of residues at 800 °C as compared to the native BMI/BTA oligomer. This was further confirmed by thermal degradation kinetic studies, in which the activation energies for the thermal degradation reactions of the cured PASi‐modified BMI/BTA oligomers were shown to be higher than that of the pristine BMI/BTA oligomer. © 2012 Society of Chemical Industry     

Micro‐structured Bi1.5Y0.3Sm0.2O3−δ catalysts for oxidative coupling of methane

Bi_1.5Y_0.3Sm_0.2O_3?δ (BYS), a ceramic material showing great activity and selectivity to oxidative coupling of methane (OCM), has been fabricated into catalyst rings (i.e., capillary tubes) with a plurality of self‐organized radial microchannels. The unique microchannels inside such BYS catalyst rings allow easier access of reactants, as well as increased the surface area, which potentially contributes to higher reaction efficiencies due to improved mass transfer. The micro‐structured BYS catalyst rings were investigated systematically via two types of reactors; (1) randomly packed fixed bed reactor and (2) monolithic‐like structured reactor. These two reactor designs have different flow patterns of reactants, that is, non‐ideal and ideal flows, which can significantly affect the final OCM performance. A remarkable improvement in C₂₊ yield (Y_C2+ > 20%) was obtained in the monolith‐like structured reactor, in contrast to randomly packed powder and micro‐structured rings (Y_C2+ < 15%), which proves the advantages of using a micro‐structured catalyst with an ideal flow in the feed for OCM. © 2015 American Institute of Chemical Engineers AIChE J, 61: 3451–3458, 2015     

Thermally‐induced phase transformations in Na0.5Bi0.5TiO3–KNbO3 ceramics

The structures and functional properties of Na_0.5Bi_0.5TiO₃–xKNbO₃ (NBT‐xKN) solid solutions, with x in the range from 0.01 to 0.09, were investigated using a combination of high‐resolution synchrotron X‐ray powder diffraction (SXPD) and ferroelectric property measurements. For low KN contents, an irreversible transformation from cubic to rhombohedral phases was observed after the application of a high electric field, indicating that the polar nanoregions (PNRs) in the unpoled state can be transformed into metastable long‐range ordered ferroelectric domains in the poled state. In contrast, the near‐cubic phase of the unpoled ceramics was found to be remarkably stable and was retained on cooling to a temperature of ?175°C. Upon heating, the field‐induced metastable ferroelectric rhombohedral phase transformed back to the nanopolar cubic state at the structural transformation temperature, T_ST, which was determined as approximately 225°C and 125°C for KN contents of 3% and 5% respectively. For the field‐induced rhombohedral phase in the poled specimens, the pseudo‐cubic lattice parameter, a_p, exhibited an anomalous reduction while the inter‐axial angle increased towards a value of 90° on heating, resulting in an overall increase in volume. The observed structural changes were correlated with the results of temperature‐dependent dielectric, ferroelectric and depolarization measurements, enabling the construction of a phase diagram to define the stable regions of the different ferroelectric phases as a function of composition and temperature.     

Highly Efficient Suzuki Coupling Reaction of α‐Chloroalkylidene‐β‐lactones and β‐Lactams with Organoboronic Acids

The activation of C Cl bond of (Z)‐α‐chloroalkylidene‐β‐lactones and (E)‐α‐chloroalkylidene‐β‐lactams via the Suzuki cross‐coupling reaction is reported in this paper. Alkyl, heteroaromatic, substituted phenyl‐ and alkenylboronic acids can be coupled with a wide variety of α‐chloroalkylidene‐β‐lactones and β‐lactams in excellent yields within a short period of time. The cross‐coupling reaction of optically active substrates leads to the optically active compounds without racemization of the corresponding chiral center.     

Hydrolysis‐improved thermosensitive polyorganophosphazenes with α‐amino‐ω‐methoxy‐poly(ethylene glycol) and amino acid esters as side groups

A series of hydrolysis‐improved thermosensitive polyorganophosphazenes with α‐amino‐ω‐methoxy‐poly(ethylene glycol) (AMPEG) and amino acid esters (AAEs) of ‘N,N‐systems’ was synthesized, and their properties were evaluated in comparison with the thermosensitive polyorganophosphazenes with methoxy‐poly(ethylene glycol) (MPEG) and AAEs of ‘O,N‐systems’, by means of ³¹P NMR spectroscopy, gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). Most of the present polymers showed a lower critical solution temperature (LCST) in the range 32.0–79.0 °C, depending on the kinds of AAE, length of AMPEG and the mol ratio of the two substituents. These polymers exhibited higher LCSTs and faster degradation rates than the MPEG‐based polymers. The aqueous solution of poly(ethyl glycinate phosphazene)‐graft‐poly(ethylene glycol) [NP(GlyEt)_0.94(AMPEG350)_1.06]_n did not show an LCST, which is presumed to be due to its high hydrophilicity, in contrast to [NP(GlyEt)_1.01(MPEG350)_0.99]_n which showing an LCST at 77.5 °C. On the other hand, the polymers with a high content of AAE or with hydrophobic amino acids such as L ‐aspartic acid and L ‐glutamic acid, have shown a similar LCST to those of the MPEG‐based polymers. The half‐lives (t_1/2) for hydrolysis of [NP(AMPEG350)_1.06(GlyEt)_0.94]_n at pH 5, 7.4 and 10 were 9, 16, and 5 days, respectively, which are almost 2.5 to 4 times faster than that of the MPEG‐based polymers. The LCST of the present N,N‐polymers has been shown to be more influenced by salts such as NaCl (‘salting‐out’ effect) and tetrapropylammonium bromide (TPAB) (‘salting‐in’ effect) compared with the ‘O,N‐system’. Such differences of the ‘N,N‐systems’ from the ‘O,N‐systems’ in thermosensitivity, hydrolysis behavior and salt effect seem to be due to the higher hydrophilicity of the amino group in AMPEG. Copyright © 2005 Society of Chemical Industry     

Palladium‐Catalyzed Suzuki Carbonylative Reaction of α‐Halomethyl Oxime Ethers: A Regioselective Route to Unsymmetrical 1,3‐Oxyiminoketones

The three‐component reaction of α‐halomethyl oxime ethers, boronic acids and carbon monoxide at atmospheric pressure catalyzed by tetrakis(triphenylphosphine)palladium(0) gives efficiently unsymmetrical β‐alkoxyimino carbonyl compounds with total control of the regioselectivity, in high yield and atomic economy. Simple commercially available starting materials are used in this synthetic procedure. The three components assembly takes place preferentially versus the competing direct coupling or other possible side reactions. The mechanism of the transformation was investigated by NMR and intermediate palladium(II) complexes were detected.