共查询到20条相似文献,搜索用时 889 毫秒
1.
本文介绍了目前我国铝电池合金生产工艺的状况,以及存在的一些问题,分析了我国与国外的差距。建议我国铅电池工业应广泛使用含铋精铅和铅合金,这样不但可以提高我国铅酸蓄电池某些方面的性能,而且可以较大幅度地降低铅酸蓄电池的制造成本,增强我国加入WTO后面临的挑战能力。 相似文献
2.
推动再生铅产业的高质量发展,是铅资源实现生产-消费-再生良性循环的重要保障,缓解铅资源枯竭的同时,有效降低铅的生产成本和改善环境污染,对促进铅工业可持续发展具有重要的战略意义。本文概述了近年来铅酸蓄电池铅膏回收的最新研究进展,基于铅酸蓄电池的资源特点和再生产品的经济效益,详细总结了以金属铅、氧化铅、硫化铅及功能性铅基材料为目标的回收工艺技术,重点分析了不同铅产品回收方法的优缺点及需注意的关键环节。结合铅产业链的下游应用,介绍了废铅酸蓄电池再生产品在电池及传感器等领域的应用。最后从实际应用角度出发,展望了未来废铅酸蓄电池铅膏回收及再生铅产品的发展方向。 相似文献
3.
4.
蓄电池行业是铅金属的主要消费市场,而铅酸蓄电池对于整个社会来说作用巨大。中国铅电池污染并不是其行业本身之过,一个健康规范的铅电池行业将与人类共存。碳排放限制引发了人们对铅酸电池前景的质疑,新能源汽车驱动系统的开发会影响电池市场格局,但由于铅酸蓄电池独特的性能,未来市场份额会保持稳定,甚至由于汽车驱动系统的更迭其市场份额可能还会稳定增长。 相似文献
5.
6.
7.
8.
文章叙述了用作高能铅酸蓄电池板栅材料的低锑铅基合金的性能、成分、并与现有的板栅材料进行了对比,从而为蓄电池行业的材料更新提供了参考。 相似文献
9.
作为全球铅酸电池的第一生产大国,铅资源的清洁高效回收成为制约我国环境、资源甚至人体健康的重大公共安全问题。废旧铅酸电池经过多道设备和工序,最终循环再利用,分离成可供电池生产的原料。“原子经济法铅循环利用技术”让铅酸蓄电池回收从“火法”到“湿法”,使得铅回收技术取得突破性进展,是国际领先的新技术,让铅酸蓄电池回收彻底告别“烟熏火燎”时代,开启了废铅酸蓄电池资源再利用的高效节能环保新时代。 相似文献
10.
11.
Rare earth compositions, La, Ce and Pr in Mm(NiCoMnA1)5 hydrogen storage alloy, were arranged by uniform design method. The discharge performances and kinetics parameters including capacity, exchange current density, symmetry factor and hydrogen diffusion coefficient of the alloy at -40℃, were tested in standard tri-electrode cell. And linear regression method was used to analyze the effect of rare earth compositions on the performances of hydrogen storage alloys. The results show that the capacities of the alloys are positively correlative to the square of Ce content at - 40℃ and under both 0.4 and 0.2C rate. The kinetics parameters and hydrogen diffusion coefficient indicate that the low-temperature performances of the alloys are mainly controlled by hydrogen diffusion process, and the surface electrochemical reaction affects the low-temperature performances to a certain extent. The low-temperature discharge capacities of the battery were also tested. The results show excellent low-temperature performances. The battery delivers 69.6% of its room-temperature capacity at -40℃ and 0.2C rate, 77.7% at -40℃ and 0.4C rate, 59.1% at -45℃ and 0.2C rate. 相似文献
12.
Effects of RE on Microstructures and Mechanical Properties of Hot-Extruded AZ31 Magnesium Alloy 总被引:4,自引:2,他引:4
Effects of rare earth (RE) additions on microstructure and mechanical properties of the wrought AZ31 magnesium alloy were investigated. The results show that, by adding 0.3%, 0.6% and 1.0% RE elements, the as-cast microstructure can be refined, and the as-cast alloys‘ elongation and tensile strength can be improved. After extrusion, the alloy with 0.3 % and 0.6% RE additions obtain a finer microstructure and the best mechanical properties, but the alloy with 1.0% RE addition has the coarse A1-RE compound particles in grain boundaries which decreased elongation and tensile properties. Usually, Rare earth (RE) elements were used to improve the creep properties of aluminium-containing magnesium pressure die cast alloys at elevated temperatures. In this paper, it is also found that the high temperature strength of extruded materials can be increased by RE elements additions. 相似文献
13.
综述了稀土元素Er在镁合金中的作用及对镁合金显微组织、力学性能和耐蚀性能影响的研究进展.Er可以净化镁合金熔体并对熔体具有良好的阻燃作用;稀土Er可以细化合金的晶粒组织,影响析出相的形态、数量、大小和分布,提高了镁合金的力学性能和耐腐蚀性能. 相似文献
14.
稀土在铜及铜基合金中的作用 总被引:15,自引:1,他引:15
稀土作为一种重要的工业原料在铜和铜合金中有着重要的价值,稀土在铜及铜基合金中能起脱气除杂的作用。能改善铜及铜基合金显微结构,提高其强度和硬度及增强热稳定性,还能增强铜合金的耐腐蚀和耐磨性能。 相似文献
15.
16.
Cu-6%Fe (mass fraction) microcomposites containing (0-0.30)% rare earth elements were prepared by cold drawing and intermediate heat treatments. Microstructure was observed, and mechanical properties and electrical conductivity were measured for alloys at various drawing strain levels. Adding rare earth elements could reduce the size of primary Fe and Cu dendrites of Cu-6%Fe. Ultimate tensile strength increased but electrical conductivity decreased with the increase of drawing strain. Rare earth additions in Cu-6%Fe slightly increased the strength at low strain and effectively improved the conductivity at high strain. Both strain hardening rate and conductivity loss of Cu-6%Fe containing rare earths were reduced at lower strain than Cu-6%Fe. 相似文献
17.
稀土钼合金组织结构的研究 总被引:2,自引:1,他引:1
在TZM钼合金的基础上,通过复合添加稀土Y、Ce的试验,生产出了高温性能优异且工艺易于控制的钼合金。对不同配方稀土钼合金的组织结构进行了深入分析,指出弥散颗粒不仅存在晶界,也可存在于晶内,因此可同时强化晶界和晶粒,但粗大的弥散颗粒和Mo-Ti固溶体对合金性能不利。用化学法富集了合金中的弥散相,通过X射线衍射和能谱综合分析,确定了弥散相的相结构,证实了在合金中稀土元素Y、Ce与Ti、Zr形成Y2O3结构的复合氧化物。Ti在合金中则有三种可能的存在形态:一是形成复合氧化物,二是形成Ti(C,N),三是形成Mo-Ti固溶体。 相似文献
18.
赵华 《有色金属(冶炼部分)》2015,(6):72-75
分析了上引工频电炉在熔铸操作中铜杆产生气孔的原因及机理,研究了熔铸时加入稀土元素对除氢、除氧、减少水汽等的作用,对有效减少和避免铜杆中产生气孔、提高铜杆质量具有重要意义。 相似文献
19.
20.
以金属RE、La、Ni、Co、Mn、Al作为稀土基贮氢合金的原料,制备了一系列不同成分的贮氢合金,进行了相应的组织结构分析及电化学性能的测试,研究了不同La、Co添加量对合金相结构与电化学性能的影响,选择确定了合适的合金配方,为生产高容量Ni-MH电池的负极材料提供了依据. 相似文献