Control of main chain structure and possibility of molecular weight control of polymer on polymerization of vinyl chloride with tert-butyllithium

The controlled polymerization of vinyl chloride (VC) with tert-butyllithium (tert-BuLi) was investigated. The polymerization of VC with tert-BuLi at −30 °C proceeded to give a high molecular weight polymer in good yield. In the polymerization of VC −30 to 0 °C under nearly bulk, the relationship between the M_n of polymers and polymer yields gave a straight line passed through the origin, but the M_w/M_n of PVC was not narrow. When CH₂Cl₂ was used as polymerization solvent, the M_n of PVC increased with the polymer yield, and the M_w/M_n of 1.25 was obtained. Structure analysis of the resulting polymers indicates that the main chain structure could be regulated in the polymerization of VC with tert-BuLi. Accordingly, a control of molecular weight of polymer and main chain structure is possible in the polymerization of VC with tert-BuLi.     

Thermal polymerization of methyl (meth)acrylate via reversible addition-fragmentation chain transfer (RAFT) process

Thermal polymerization of methyl (meth)acrylate (MMA) was carried out using 2-cyanoprop-2-yl-1-dithionaphthalate (CPDN) and cumyl dithionaphthalenoate (CDN) as chain transfer agents. The kinetic study showed the existence of induction period and rate retardation, especially in the CDN mediated systems. The molecular weights of the polymers increased linearly with the monomer conversion, and the molecular weight distributions (M_w/M_ns) of the polymers were relatively narrow up to high conversions. The maximum number-average molecular weights (M_ns) reached to 351?900 g/mol (M_w/M_n = 1.47) and 442?400 g/mol (M_w/M_n = 1.29) in the systems mediated by CPDN and CDN, respectively. Chain-extension reactions were also successfully carried out to obtain higher molecular weight PMMA and PMMA-block-polystyrene (PMMA-b-PSt) copolymer with controlled structure and narrow M_w/M_n. Thermal polymerization of methyl acrylate (MA) in the presence of CPDN, or benzyl (2-phenyl)-1-imidazolecarbodithioate (BPIC) also demonstrated “living”/controlled features with the experimented maximum molecular weight 312?500 g/mol (M_w/M_n = 1.57). The possible initiation mechanism of the thermal polymerization was discussed.     

Co γ-irradiation-initiated RAFT polymerization of VAc at room temperature

In this work, the reversible addition-fragmentation chain transfer (RAFT) polymerization of vinyl acetate (VAc) was successfully performed at room temperature using ⁶⁰Co γ-irradiation as the initiation source. Under the dose rate of 10 Gy/min irradiation, the polymerization proceeded smoothly and converted approximately 90% of the monomer within 7 h. The molecular weight distribution (M_w/M_n) remained narrow (M_w/M_n < 1.35) up to 90% conversion. Compared to AIBN-initiated RAFT polymerization at 60 °C, ⁶⁰Co γ-irradiation-initiated RAFT polymerization is a technique that can better control the molecular weight, especially at high conversion. The ¹H NMR spectra and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry confirmed that most of the chain ends of poly(VAc) (PVAc) from γ-irradiated RAFT polymerization were living and can be reactivated for chain-extension reactions. The microstructures of PVAc from ⁶⁰Co γ-irradiated RAFT polymerization (almost head-to-tail addition) and AIBN-initiated RAFT polymerization (5% tail-to-tail addition) were different, as revealed by the ¹³C NMR spectra. For the first time, ⁶⁰Co γ-irradiation was used as an initiation source for RAFT polymerization of VAc at room temperature.     

Synthesis and characterization of controlled molecular weight disulfonated poly(arylene ether sulfone) copolymers and their applications to proton exchange membranes

tert-Butylphenyl terminated disulfonated poly(arylene ether sulfone) copolymers with controlled molecular weights (M_n), 20-50 kg mol⁻¹, were successfully prepared by direct copolymerization of the two activated halides, biphenol and the endcapper, 4-tert-butylphenol. The high molecular weight copolymer (molecular weight over 80 kg mol⁻¹) was also synthesized with 1:1 stoichiometry without an endcapping reagent. The chemical compositions and the molecular weights of the endcapped copolymers were characterized by their ¹H NMR spectra utilizing the 18 unique protons at the chain ends. Modified intrinsic viscosity measurements in 0.05 M LiBr/NMP solution further correlated well with NMR results. Combining the endcapping chemistry with proton NMR end group analysis and intrinsic viscosity measurements, one can demonstrate a powerful tool for characterizing molecular weight of sulfonated poly(arylene ether sulfone) random copolymers. This enables one to further investigate the influence of molecular weight on several critical parameters important for proton exchange membranes, including water uptake, in-plane protonic conductivity and selected mechanical properties. These are briefly discussed herein and will be more fully described in subsequent publications.     

Effects of molecular weight on poly(ω-pentadecalactone) mechanical and thermal properties

A series of poly(ω-pentadecalactone) (PPDL) samples, synthesized by lipase catalysis, were prepared by systematic variation of reaction time and water content. These samples possessed weight-average molecular weights (M_w), determined by multi-angle laser light scattering (MALLS), from 2.5 × 10⁴ to 48.1 × 10⁴. Cold-drawing tensile tests at room temperature of PPDL samples with M_w between 4.5 × 10⁴ and 8.1 × 10⁴ showed a brittle-to-ductile transition. For PPDL with M_w of 8.1 × 10⁴, inter-fibrillar slippage dominates during deformation until fracture. Increasing M_w above 18.9 × 10⁴ resulted in enhanced entanglement network strength and strain-hardening. The high M_w samples also exhibited tough properties with elongation at break about 650% and tensile strength about 60.8 MPa, comparable to linear high density polyethylene (HDPE). Relationships among molecular weight, Young's modulus, stress, strain at yield, melting and crystallization enthalpy (by differential scanning calorimetry, DSC) and crystallinity (from wide-angle X-ray diffraction, WAXD) were correlated for PPDL samples. Similarities and differences of linear HDPE and PPDL molecular weight dependence on their mechanical and thermal properties were also compared.     

Preparation and characterization of multilayer-type electrolyte membranes with hydrocarbon polymers

Multilayer-type polymer electrolyte membranes composed of a sulfonated poly(4-phenoxybenzoyl-1,4-phenylene) (S-PPBP) layer and a mono[poly(propylene oxide)methacrylate]phosphate ester (PPHP) layer were fabricated by solution-casting procedure (Method 1) and hot-pressing procedure (Method 2) in order to suppress methanol permeability of electrolyte membranes. No delamination was observed by SEM measurements of S-PPBP/PPHP interfaces, indicating that PPHP had good adhesive properties to S-PPBP surfaces. The methanol permeability of S-PPBP/PPHP membranes was lower than that of S-PPBP membranes and decreased with increasing the thickness of PPHP layers. The bilayer membrane with 12 μm PPHP and 40 μm S-PPBP layers showed a methanol permeability of 2.97 × 10⁻⁷ cm² s⁻¹ in 1 mol dm⁻³ methanol aqueous solution at 25 °C, which was 13% less than that of the S-PPBP membranes. The conductivity of this membrane reached its optimum with values as high as 1.57 × 10⁻¹ S cm⁻¹ at 80 °C and 90%RH.     

New highly proton-conducting membrane poly(vinylpyrrolidone)(PVP) modified poly(vinyl alcohol)/2-acrylamido-2-methyl-1-propanesulfonic acid (PVA-PAMPS) for low temperature direct methanol fuel cells (DMFCs)

A new type of chemically cross-linked polymer blend membranes consisting of poly(vinyl alcohol) (PVA), 2-acrylamido-2-methyl-1-propanesulfonic acid (PAMPS) and poly(vinylpyrrolidone) (PVP) have been prepared and evaluated as proton conducting polymer electrolytes. The proton conductivity (σ) of the membranes was investigated as a function of cross-linking time, blending composition, water content and ion exchange capacity (IEC). Membranes were also characterized by FT-IR spectroscopy, thermogravimetric analysis (TGA), and the differential scanning calorimetry (DSC). Membrane swelling decreased with cross-linking time, accompanied by an improvement in mechanical properties and a small decrease in proton conductivity due to the reduced water absorption. The membranes attained 0.088 S cm⁻¹ of the proton conductivity and 1.63 mequiv g⁻¹ of IEC at 25±2 °C for a polymer composition PVA-PAMPS-PVP being 1:1:0.5 in mass, and a methanol permeability of 6.1×10⁻⁷ cm² s⁻¹, which showed a comparable proton conductivity to Nafion 117, but only one third of Nafion 117 methanol permeability under the same measuring conditions. The membranes displayed a relatively high oxidative durability without weight loss of the membranes (e.g. 100 h in 3% H₂O₂ solution and 20 h in 10% H₂O₂ solution at 60 °C). PVP, as a modifier, was found to play a crucial role in improving the above membrane performances.     

Blend membranes based on disulfonated poly(aryl ether ether ketone)s (SPEEK) and poly(amide imide) (PAI) for direct methanol fuel cell usages

Highly disulfonated poly(aryl ether ether ketone)s (SPEEK-70) copolymer was synthesized via direct polymerization to precisely control the degree of sulfonation (D_s = 1.40), which was confirmed and estimated by ¹H NMR. As expected, the proton conductivity of SPEEK-70 membrane is 0.084 S/cm at 25 °C and increases to 0.167 S/cm at 80 °C, surpassing that of Nafion^® 117. However, the relatively high methanol crossover and excessively swelling properties limited its usage in DMFC. Poly(amide imide) was blended with SPEEK-70 to improve the methanol resistance and mechanical properties. These blend membranes were characterized as a function of weight fraction of PAI in terms of ion exchange capacity (IEC), water uptake, water desorption, proton conductivity and methanol permeability in detail. Although the proton conductivities decreased upon the addition of PAI, higher selectivity values defined as the ratio of proton conductivity to methanol permeability were found for the blend membranes. Therefore, the SPEEK/PAI blend membranes are promising for usage in DMFC.     

Synthesis and aqueous solution characterization of amphiphilic diblock copolymers containing carbazole

A series of near-monodisperse diblock copolymers of 2-(N-carbazolyl)ethyl methacrylate and 2-(dimethylamino)ethyl methacrylate (DMAEMA) of relatively low molecular weights (2600-24,000 g mol⁻¹) were synthesized by group transfer polymerization using tetrahydrofuran (THF) as a solvent. The molecular weight distributions and compositions of all the copolymers were obtained using gel permeation chromatography (GPC) in THF and proton nuclear magnetic resonance (¹H NMR) spectroscopy, respectively. Differential scanning calorimetry and thermal gravimetric analysis provided low glass transition temperatures (T_gs) of about 60 °C and decomposition temperatures between 320 and 450 °C for the copolymers, respectively. The three copolymers with the highest DMAEMA content were water-soluble below pH 7. Aqueous GPC at pH 3 showed that the water-soluble block copolymers formed micelles with apparent number average molecular weights above 100,000 g mol⁻¹.     

Study of basic biopolymer as proton membrane for fuel cell systems

Up to now, many research groups work to improve the electrical and mechanical properties of membranes with a low cost of production. The biopolymers could be an answer to produce proton membranes at low cost. This work demonstrates that the intrinsic membrane polymer and clays properties can help to develop a novel proton exchange membranes. Biopolymer composites (chitosan-oxide compounds) present conductivity between 10⁻³ and 10⁻² S cm⁻¹. The measurements were calculated by EIS (1 MHz-0.05 Hz) using the two-electrode configuration. Different oxides were used: MgO, CaO, SiO₂, Al₂O₃. The ionic conductivities were compared with Nafion^®'s in the same conditions of P and T. The catalyst layer/membrane ensemble was made during the design with the subsequent demonstration as membrane electrode assemblies and finally the fuel cell was built. Our focus was to increase the compatibility between the proton basic polymer exchange membrane and basic clays as CaO and test a new kind of fuel cell.     

Lipase-catalyzed synthesis of poly-l-lactide using supercritical carbon dioxide

The present work shows that the enzyme mediated ring-opening polymerization of l-lactide at 65 °C can be achieved using supercritical carbon dioxide. It is reported a biphasic media system where the supercritical phase coexists with a liquid organic phase, which is mainly composed of melted monomer, wherein the growing poly-l-lactide chains are soluble. The immobilized lipase B from Candida antartica was used as the biocatalyst. The results indicated that semi-crystalline polymers with a molecular weight (M_w) up to 12,900 g mol⁻¹ can be attained and that the monomer conversion is related to the biocatalyst concentration and its initial water activity (a_wi). Experiments carried out with denatured enzyme gave no monomer conversion which confirms that the enzymatic mechanism is only involved in our system.     

Half-sandwich samarium (III) diketiminate bromide as a catalyst for methyl methacrylate polymerization

Half-sandwich samarium(III) diketiminate bromide was successfully synthesized and was shown to be active in methyl methacrylate (MMA) polymerization. The effects of temperature, polymerization time and catalyst concentration were studied. Activities of ca. 18 kg of polymethacrylate (PMMA) per mol of samarium per hour were obtained under optimum conditions (0 °C and a MMA/catalyst molar ratio of 100/1), giving a polymer with a molar mass M_n>24,000 g mol⁻¹ and a molar mass distribution (M_w/M_n)<1.4. After 1 h of polymerization, conversions of MMA as high as 96% were observed.     

Hyperbranched polymers from divinylbenzene and 1,3-diisopropenylbenzene through anionic self-condensing vinyl polymerization

Hyperbranched polymers were synthesized using anionic self-condensing vinyl polymerization (ASCVP) by forming ‘inimer’ (initiator within a monomer) in situ from divinylbenzene (DVB) and 1,3-diisopropenylbenzene (DIPB) using anionic initiators in THF at −40 °C. The reaction of equimolar amounts of DVB and nBuLi results in the formation of hyperbranched poly(divinylbenzene) through self-condensing vinyl polymerization (SCVP). The hyperbranched polymers were invariably contaminated with small amount of gel (<15%). No gelation was observed when using DIBP with anionic initiators. The presence of monomer-polymer equilibrium in the SCVP of DIPB restricts the growth of hyperbranched poly(DIPB). The inimer synthesized from DIPB at 35 °C undergoes intermolecular self-condensation to different extent depending on the nature of anionic initiator at −40 °C. The molecular weight of the hyperbranched polymers was higher when DPHLi was used as initiator. A small amount of styrene ([styrene]/[Li⁺]=1) was used to promote the chain growth by inducing cross-over reaction with styrene, and subsequent reaction of styryl anion with isopropenyl groups of inimer/hyperbranched oligomer. The hyperbranched polymers were soluble in organic solvents and exhibited broad molecular weight distribution (2<M_w/M_n<17).     

A new proton conducting membrane based on copolymer of methyl methacrylate and 2-acrylamido-2-methyl-1-propanesulfonic acid for direct methanol fuel cells

In this paper, a new kind of copolymer methyl methacrylate and 2-acrylamido-2-methyl-1-propanesulfonic acid (PAMPS-co-MMA) was synthesized by free radical polymerization. IR-spectrum and ¹H NMR were used to confirm the structure of the copolymers, and the thermal character of the copolymers was investigated with TGA and DSC. Flexible and transparent membranes based on this kind of copolymer were prepared by solution casting method. The physical properties including ionic exchange capability (IEC), water uptake, proton conductivity, methanol permeability and morphology of the membranes were investigated. These membranes showed higher water uptake though they had lower IEC compared with Nafion-117. The proton conductivity of the membrane with IEC of 0.9 mmol/g was 1.14 × 10⁻² S/cm and its methanol permeability coefficient was 5.46 × 10⁻⁷ cm²/s, much lower than that of Nafion-117. Tests on cells were also carried out to measure the performance of the membrane.     

Polymerization of vinyl ethers using titanium catalysts containing tridentate triamine ligand of the type N[CH2CH(Ph)(Ts)N]2

Titanium complexes having tridentate triamine of the type N[CH₂CH(Ph)(Ts)N]₂²⁻ in combination with methylaluminoxane (MAO) was able to polymerize ethyl vinyl ether in good yields. The polymers obtained in general were having molecular weight in the order of 10⁵ with narrow molecular weight distributions. Polymerization conditions had an impact on the molecular weight and the polydispersity index (PDI). Using chlorobenzene as the solvent the polymer had an M_n of 350?000 and PDI of 1.21, where as under neat conditions the M_n was 255?000 with PDI of 1.21. The type of solvent and the temperature dictated the polymerization rate and the polymer stereo regularity. The molecular weight of the polymer is distinctly governed by the polymerization temperature. Temperature ranging between −50 and ambient (30 °C) resulted in high molecular weight polymers and vice versa at a temperature of 60-70 °C resulted in low molecular weight polymers in moderate yields. The polymers obtained below 30 °C are highly stereo-regular compared to that of the ones produced at and above ambient temperature. The polymerization of iso-butyl vinyl ether (IBVE) was faster than that of linearly substituted n-butyl vinyl ether (BVE) and less bulky ethyl vinyl ether (EVE). The order of isotacticities of the polymers obtained are polyIBVE > polyBVE > polyEVE. The use of borate cocatalyst for activation generated narrow molecular weight polymers with a linear increase in the yield and molecular weight over time suggesting the living nature of the catalyst system.     

Synthesis and characterization of perfluorocyclobutyl aryl ether-based amphiphilic diblock copolymer

Perfluorocyclobutyl aryl ether-based amphiphilic diblock copolymer containing hydrophilic poly(ethylene glycol) segment was synthesized by atom transfer radical polymerization (ATRP). Perfluorocyclobutyl-containing methacrylate-based monomer, 4-(4′-p-tolyloxyperfluorocyclobutoxy)benzyl methacrylate, was prepared firstly, which can be polymerized by ATRP in a controlled way to obtain well-defined homopolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.30). The molecular weights increased linearly with the conversions of monomer and the apparent polymerization rate exhibited first-order relation with respect to the concentration of monomer. ATRP of 4-(4′-p-tolyloxyperfluorocyclobutoxy)benzyl methacrylate was initiated by PEG-based macroinitiators with different molecular weights to obtain amphiphilic diblock copolymers with narrow molecular weight distributions (M_w/M_n < 1.35) and the number of perfluorocyclobutyl linkage can be tuned by the feed ratio and the conversion of the fluorine-containing methacrylate monomer. The critical micelle concentrations of these amphiphilic diblock copolymers in water and brine were determined by fluorescence probe technique. The morphologies of the micelles were found to be spheres by TEM.     

A convenient route to high molecular weight highly isotactic polystyrene using Ziegler-Natta catalysts and ultrasound

Ziegler-Natta (TiCl₄/AlEt₃) catalysts and ultrasound were used to prepare highly isotactic polystyrene (ca. 99%) with a molecular weight of 4.7×10⁶ mol g⁻¹ and low molecular weight distribution (M_w/M_n=1.6) via a convenient method. Ultrasound was most effective if applied only during an initial stage in the polymerisation, most likely permitting dispersion of catalyst particles which were subsequently coated and separated by growing polymer chains. Yields could be improved by varying the amount of catalyst and reaction time.     

Soluble neodymium chloride 2-ethylhexanol complex as a highly active catalyst for controlled isoprene polymerization

Soluble NdCl₃·3EHOH (2-ethyl hexanol) in hexane combined with AlEt₃ is highly active for isoprene polymerization in hexane. The NdCl₃·3EHOH/AlEt₃ has higher activity than the typical binary catalyst NdCl₃·3ⁱPrOH (isopropanol)/AlEt₃ and ternary catalyst NdV₃ (neodymium versatate)/AlEt₂Cl/Al(i-Bu)₂H. The molecular weight of polyisoprenes can be controlled by variation of [Nd], [Al]/[Nd] ratio and polymerization temperature and time. The NdCl₃·3EHOH/AlEt₃ catalyst polymerized isoprene to afford products featuring high cis-1,4 stereospecificity (ca. 96%), high molecular weight (ca. 10⁵) and relatively narrow molecular weight distributions (M_w/M_n = 2.0-2.8) simultaneously. More importantly, some living polymerization characteristics were demonstrated: (a) absence of chain termination; (b) linear correlation between M_n and polymer yield; (c) increment of molecular weight in the ‘seeding’ polymerization. Though some deviation from the typical living polymerization such as molecular weight distribution is not narrow enough and the line of M_n and polymer yield does not extrapolate to zero, controlled polymerization with the current catalyst can still be concluded.     

Affine deformation of single polymer chain in poly(methyl methacrylate) films under uniaxial extension observed by scanning near-field optical microscopy

The conformation of single poly(methyl methacrylate) chain in the uniaxially stretched film was observed by the combination of the fluorescence labeling technique and scanning near-field optical microscopy (SNOM). The dimension of the individual probe chain (M_w = 1.99 × 10⁶) along the extension axis was evaluated from SNOM image. In the high molecular weight matrix (M_w = 1.89 × 10⁶) the average extension ratio at the single chain level coincided with the macroscopic extension ratio. The distribution of the chain conformation was in good agreement with that of the freely jointed chain followed by affine deformation. On the other hand, the probe chain embedded in the low molecular weight matrix (M_w = 1.76 × 10⁵) showed the smaller extension than that expected from the affine deformation. This suggests that the conformation of the probe chain is affected by the relaxation of the short surrounding chains through disentanglement.     

Dimensions and viscosity behavior of polyelectrolyte brushes in aqueous sodium chloride. A polymacromonomer consisting of sodium poly(styrene sulfonate)

Nine samples of a polymacromonomer consisting of sodium poly(styrene sulfonate) and having a side-chain polymerization degree of 15 are investigated by light scattering, small-angle X-ray scattering, and viscometry with 0.05 M aqueous NaCl at 25 °C as the solvent. The (total) weight-average molecular weight M_w ranges from 2.2 × 10⁴ to 7.1 × 10⁶. The radii of gyration, scattering functions, and intrinsic viscosities determined as functions of M_w are analyzed in terms of the cylindrical wormlike chain model. The estimated Kuhn segment length of about 120 nm is much larger than that (16 nm) for the polystyrene polymacromonomer with the equivalent side-chain length in toluene, a good solvent, while the chain thickness (5.5 nm) is comparable to or only slightly larger than that (5 nm) of the nonionic polymer. It is thus concluded that the electrostatic repulsion between side chains significantly stiffens the main chain of the polyelectrolyte brush.