Modification of polysulfone membranes via surface‐initiated atom transfer radical polymerization and their antifouling properties

Surface‐initiated atom transfer radical polymerization (ATRP) was used to tailor the functionality of polysulfone (PSF) membranes. A simple one‐step method for the chloromethylation of PSF under mild conditions was used to introduce surface benzyl chloride groups as active ATRP initiators. Covalently tethered hydrophilic polymer brushes of poly(ethylene glycol)monomethacrylate and 2‐hydroxyethyl methacrylate and their block copolymer brushes were prepared via surface‐initiated ATRP from the chloromethylated PSF surfaces. A kinetic study revealed that the chain growth from the membranes was consistent with a controlled process. X‐ray photoelectron spectroscopy was used to characterize the surface‐modified membrane after each modification stage. Protein adsorption experiments revealed substantial antifouling properties of the grafted PSF membranes in comparison with the those of the pristine PSF surface. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Surface functionalization of nanodiamond particles via atom transfer radical polymerization

Ultradispersed diamond (UDD)/polymer brushes having excellent solution dispersibilities are prepared by atom transfer radical polymerization (ATRP) using the “grafting-from” synthesis strategy. ATRP initiators, covalently attached to oxidized surface carbon atoms of UDD aggregates using esterification chemistry, initiate polymerization of methacrylate monomers to form hydrophobic UDD/poly(iso-butyl methacrylate) and UDD/poly(tert-butyl methacrylate) polymer brushes. Acid hydrolysis of a UDD/poly(tert-butyl methacrylate) polymer brush affords a hydrophilic UDD/poly(methacrylic acid) polymer brush. Based on surface area measurements and GPC data, the calculated surface density of a representative UDD/polymer brush material is ca. five polymer chains/100 nm². A wide variety of UDD/polymer brush materials having controlled dispersibility and functional group reactivity are now potentially available using this synthesis strategy.     

Preparation of well-defined environmentally responsive polymer brushes on monolithic surface by two-step atom transfer radical polymerization method for HPLC

Well-defined poly (2-(dimethylamino) ethyl methacrylate) (PDMAEMA) brushes were successfully prepared on the monolithic surface via two-step atom transfer radical polymerization (ATRP). The polymer brushes synthesized by the second-step ATRP were based on the active bromic groups resulting from poly (ethylene glycol dimethacrylate) (pEDMA) monolith which was prepared at room temperature by the first-step ATRP. Element analysis was used to monitor the grafting process at different reaction times. Each step of preparation was characterized by scanning electron microscope, infrared spectrum and mercury intrusion porosimetry. Employment of PDMAEMA grafted monolith as the stationary phase for chromatographic analysis of steroids demonstrated that the PDMAEMA brushes possessed both pH- and salt-responsive properties. Noticeably, it has been found that the chain length of PDMAEMA brushes could influence the retention behavior of steroids due to the controllability of ATRP, which proposed an interesting alternative to modulate retention in HPLC. This is the first application of PDMAEMA brushes grafted monolith by two-step ATRP method for constructing responsive surface in HPLC and it might exploit a new path for widening the monolith application in various fields.     

Nitroxide polymer brushes as efficient and recoverable catalysts for the selective oxidation of primary alcohols to aldehydes

2,2,6,6‐Tetramethylpiperidinyloxyl (TEMPO)‐containing polymer brushes were grafted onto crosslinked polystyrene microspheres via surface‐initiated activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) of 2,2,6,6‐tetramethyl‐4‐piperidyl methacrylate, followed by an oxidation process with 3‐chloroperoxybenzoic acid as oxidant. The synthesized nitroxide polymer brushes included homopolymer brushes, block copolymer brushes, and random copolymer brushes with various TEMPO contents and molecular weights. They were characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, transmission electron microscopy, nuclear magnetic resonance spectroscopy, and gel permeation chromatography. These nitroxide brushes bearing high TEMPO contents were used as recoverable catalysts for the hypochlorite and aerobic oxidation of primary alcohols to aldehydes. The effects of polymer brush structure on the catalytic properties were studied and discussed. The results showed that these nitroxide polymer brushes had excellent catalytic properties and good recycling performances. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44365.     

Modification of Silica Nanoparticles with Miktoarm Polymer Brushes via ATRP

Silica nanoparticles were successfully modified with miktoarm brushes via atom transfer radical polymerization (ATRP) using three different approaches. In the first approach: “graft onto and from”, a poly(tert-butyl acrylate) (PtBA) macroinitiator was grafted onto the surface of a monomer-modified silica nanoparticle. Then, polystyrene (PSt) brush was grafted from the surface-tethered reactive chain end. In the second approach: “two-step reverse ATRP”, the PtBA and poly(n-butyl acrylate) (PBA) brushes were consecutively grafted from initiator-modified silica particles via ATRP. The polymerization was initiated from the silica surface via a two-step controlled thermal decomposition of surface-tethered diazo initiator moieties. In the third method: “diblock first”, a diblock copolymer of poly(tert-butyl acrylate) and poly(glycidyl methacrylate) (PtBA-b-PGMA) was grafted onto amine-modified silica particles. The diblock copolymer was covalently attached to the silica surface via interaction between surface-tethered amine groups and the short reactive block containing glycidyl groups. Next, the polystyrene brushes were grafted from surface-tethered reactive chain end. The materials prepared by three different approaches were characterized using gel permeation chromatography (GPC) and thermogravimetric analysis (TGA). The PtBA brushes were hydrolyzed under acidic conditions to form poly(acrylic acid) (PAA) brushes. The resulting materials were imaged using atomic force microscopy (AFM) and transmission electron microscopy (TEM).     

pH-induced conformational changes of loosely grafted molecular brushes containing poly(acrylic acid) side chains

A series of water-soluble loosely grafted poly(acrylic acid) (PAA) brushes with four different grafting densities were synthesized by the “grafting from” approach using atom transfer radical polymerization (ATRP). Gel permeation chromatography (GPC) and ¹H NMR spectroscopy were used to provide evidence for formation of the well-defined backbones and the resulting brush copolymers. Atomic force microscopy was used to study the conformation of adsorbed brushes as a function of pH. The adsorbed molecules undergo a globule-to-extended conformational transition as the solution is changed from acidic to basic. This transition was monitored on a mica surface by imaging individual molecules with atomic force microscopy (AFM). The conformational behavior was compared with 100%-grafted PAA brushes. Unlike the loose brushes, the 100%-grafted molecules remained fully extended in a broad range of pH values (pH = 2-9) due to steric repulsion between the densely grafted side chains which is strongly enhanced upon adsorption to a substrate.     

Poly(l-lactide) comb polymer brushes on the surface of clay layers

Poly(l-lactide) (PLLA) comb polymers on poly(hydroxyethyl methacrylate) (PHEMA) backbone were prepared on the surface of clay layers by a combination of in situ atom transfer radical polymerization (ATRP) and ring-opening polymerization. An ATRP initiator with a quaternary ammonium salt end group was intercalated into the interlayer spacing of clay. PHEMA polymer brushes on the surface of clay layers were prepared by in situ ATRP. PLLA comb polymers on PHEMA backbone were prepared by ring-opening polymerization. X-ray diffraction (XRD) and transmission electron microscopy (TEM) results showed that with the increase of comb chain length more and more exfoliated structure was created. Aggregation of wormlike comb polymer brushes on the surface of clay layers was observed by TEM. Differential scanning calorimeter (DSC) results indicated that both the melting points and glass transition temperatures of the comb polymer brushes increase with the increase of comb chain length. The equilibrium melting temperature of the comb polymer brush on the surface of clay layers is lower than cleaved polymer. An atomic force microscopy (AFM) image proves the formation of wormlike structure by cleaved comb polymers.     

Polyimide films with antibacterial surfaces from surface‐initiated atom‐transfer radical polymerization

BACKGROUND: Materials with antibacterial surface properties have attracted extensive scientific interest for research and development in the battle against microbial contamination. The application of antimicrobial polymers minimizes environmental problems and enhances the efficiency, selectivity and lifetime of the antimicrobial agents. In this paper polyimide (PI) films are chosen as the polymeric substrate to be modified due to the good thermal, mechanical and physicochemical properties of PI. The method of preparing PI films with antibacterial surfaces using surface‐initiated atom‐transfer radical polymerization (ATRP) is described. RESULTS: The results from X‐ray photoelectron spectroscopy showed that the surfaces at each stage were modified successfully. The pyridinium groups introduced on the PI surface possessed antibacterial properties and the bactericidal effect of the functionalized PI films on Escherichia coli was evaluated. Quaternization of the pyridine rings of the poly(4‐vinylpyridine) (P4VP) brushes gave rise to a high concentration of quaternary pyridinium groups on the PI film surfaces. The antibacterial efficiency of the modified PI film was dependent on the amount of quaternary pyridinium groups on the surface. CONCLUSION: In this research, functional polymer brushes of P4VP were prepared via surface‐initiated ATRP from PI films, followed by alkylation of the grafted P4VP with hexyl bromide. The surface functionalization method described has the advantage of being effective in conferring antibacterial properties on polymeric materials. Copyright © 2008 Society of Chemical Industry     

Controlled grafting of polymer brushes on poly(vinylidene fluoride) films by surface‐initiated atom transfer radical polymerization

Controlled grafting of well‐defined polymer brushes on the poly(vinylidene fluoride) (PVDF) films was carried out by the surface‐initiated atom transfer radical polymerization (ATRP). Surface‐initiators were immobilized on the PVDF films by surface hydroxylation and esterification of the hydroxyl groups covalently linked to the surface with 2‐bromoisobutyrate bromide. Homopolymer brushes of methyl methacrylate (MMA) and poly(ethylene glycol) monomethacrylate (PEGMA) were prepared by ATRP from the α‐bromoester‐functionalized PVDF surface. The chemical composition of the graft‐functionalized PVDF surfaces was characterized by X‐ray photoelectron spectroscopy (XPS) and attenuated total reflectance (ATR)–FTIR spectroscopy. Kinetics study revealed a linear increase in the graft concentration of PMMA and PEGMA with the reaction time, indicating that the chain growth from the surface was consistent with a “controlled” or “living” process. The “living” chain ends were used as the macroinitiator for the synthesis of diblock copolymer brushes. Water contact angles on PVDF films were reduced by surface grafting of PEGMA and MMA. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3704–3712, 2006     

Synthesis and characterization of well-defined hydrophilic block copolymer brushes by aqueous ATRP

Homopolymer brushes of poly(N,N-dimethylacrylamide) (PDMA), poly(methoxyethylacrylamide) (PMEA) and poly(N-isopropylacrylamide)(PNIPAM) grown on atom transfer radical polymerization (ATRP) initiator functionalized latex particles were used as macroinitiators for the synthesis of PDMA-b-PNIPAM/PMEA, PMEA-b-PDMA/PNIPAM and PNIPAM-b-PDMA block copolymer brushes by surface initiated aqueous ATRP. The grafted homopolymer and block copolymer brushes were analyzed for molecular weight, molecular weight distribution, chain grafting density, composition and hydrodynamic thickness (HT) using gel permeation chromatography-multi-angle laser light scattering, ¹H NMR, particle size analysis and atomic force microscopy (AFM) techniques. The measured graft molecular weight increased following the second ATRP reaction in all cases, indicating the second block had been added. Chain growth depended on the nature of the monomer used for block copolymerization and its concentration. Unimodal distribution of polymer chains in GPC with non-overlap of molar mass-elution volume curves implied an efficient block copolymerization. This was supported by the increase in HT measured by particle size analysis, equilibrium thickness observed by AFM and the composition of the block copolymer layer by ¹H NMR analysis, both in situ and on cleaved chains in solution. ¹H NMR analysis of the grafted latex and cleaved polymers from the surface demonstrated that accurate determination of the copolymer composition by this method is possible without detaching polymer chains from surface. Block copolymer brushes obey the same power law dependence of HT on molecular weight as homopolymer brushes in good solvent conditions. The NIPAM-containing block copolymer brushes were sensitive to changes in the environment as shown by a decrease in HT with increase in the temperature of the medium.     

Copolyimide molecular brushes with poly(methacrylic acid) side chains as additive to polyphthalamide membrane: Organization,physical, and transport properties

Macromolecules of complex architecture find application as modifiers of commercial polymeric membrane materials. In this work, copolyimide molecular brushes (coPI) composed of polyimide backbone and poly(methacrylic acid) side chains were used to modify poly(m-phenylene iso-phthalamide) (PPA). Structure, physical, mechanical, and transport properties of dense nonporous PPA/coPI membranes containing up to 10 wt% coPI were studied. The effect of included coPI on the membrane structure was estimated using atomic force microscopy and mechanical tests. The coPI modifier contributes to the additional formation of free volume elements evenly distributed throughout the membrane. Transport properties of PPA/coPI membranes were investigated via sorption tests and pervaporation separation of methanol (MeOH) and methyl tert-butyl ether (MTBE) mixtures. The inclusion of coPI modifier in the PPA membrane leads to an increase in the total flux of the membrane. The highest separation factor was found for the PPA/coPI membrane containing 10 wt% coPI; transport properties of the best membrane were compared with the literature data on separation of the azeotropic MeOH–MTBE mixture.     

Synthesis of poly(styrene-co-acrylonitrile) copolymer brushes on silica nanoparticles through surface-initiated polymerization

In the present investigation, silica nanoparticles have been coated with poly(styrene-co-acrylonitrile) (SAN) copolymer brushes synthesized via surface-initiated atom transfer radical polymerization (ATRP). In the initial step, silica nanoparticles were functionalized with triethoxysilane-based ATR initiator, 6-(2-bromo-2-methyl) propionyloxy hexyl triethoxysilane. Successful formation of the covalent linkages between ATRP initiator and silica nanoparticles is further corroborated using thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS). The surface initiated ATRP of the styrene and the acrylonitrile mediated by a copper complex was carried out using the initiator fixed silica nanoparticles in the presence of a sacrificial (free) initiator. The polymerization is preceded in a living manner in all examined cases, producing nanoparticles coated with well-defined poly(styrene-co-acrylonitrile) (SAN) brushes with molecular weight in the range of 12–22 kDa. SAN-grafted silica nanoparticles were characterized using TGA which showed significant weight loss in the temperature range of 340–420 °C confirming the formation of the polymer brushes on the surface with graft densities in the range of 0.109–0.190 chains/nm². Successful formation of the SAN copolymer brushes are further characterized by FTIR and proton nuclear magnetic resonance spectroscopy techniques. Differential scanning calorimetric studies revealed that the SAN copolymer grafted onto silica nanoparticles exhibits higher glass transition temperatures than free SAN copolymers. Transmission electron microscopy and dynamic light scattering studies revealed that the SAN copolymer-grafted silica nanoparticles showed relatively fine dispersion in organic solvents such as tetrahydrofuran, when compared to bare silica nanoparticles.     

Synthesis, characterization and swelling behaviour of poly(methacrylic acid) brushes synthesized using atom transfer radical polymerization

Poly(methacrylic acid) brushes have been prepared utilizing the “grafting from” technique and a living radical synthesis route using a two stage process. Firstly a poly(1-ethoxyethyl methacrylate) brush was synthesized by atom transfer radical polymerization and then thermally decomposed to poly(methacrylic acid). The swelling behaviour of the weak polyacid brush was investigated as a function of pH and salt concentration in aqueous solutions using atomic force microscopy. Force pulling measurements were used to establish the molecular weight and the grafted chain density. The swelling transition was found to be at pH 9; which is significantly different to the pK_a (5.5) of untethered poly(methacrylic acid). We attribute this large shift in pK_a to the high grafting density of these brushes. This can be explained as a result of the Coulombic repulsion of neighbouring charges. High salt concentrations (0.3 M Na⁺) also collapse the brush layer. Conversely low salt concentrations cause an increase in the thickness of the brush, a behaviour expected for osmotic brushes.     

Growth of silver nanoparticles on poly(acrylic acid) brushes and their properties

A simple procedure is employed for the growth of silver nanoparticles (Ag NPs) onto the silicon substrate modified by poly(acrylic acid) (PAA) brushes, via: (1) surface-initiated ATRP of tert-butyl acrylate on Si surface to the preparation of poly(tert-butyl acrylate) brushes, (2) acid hydrolysis of PBA to the formation of PAA, and (3) in situ synthesis of Ag NPs via chemical reduction of AgNO₃ in the presence of PAA brushes. The polymer brushes are thoroughly characterized. Moreover, Ag nanoparticles are homogeneously immobilized into the brush layer and have been used to fabricate a sensor platform of surface-enhance Raman scattering for the detection of organic molecules and effectively catalyze the reduction of methylene blue by NaBH₄.     

Controlled grafting of N-isoproply acrylamide brushes onto self-standing isotactic polypropylene thin films: surface initiated atom transfer radical polymerization

Surface initiated atom transfer radical polymerization (ATRP) technique using CuBr/CuBr₂/bpy complex is employed to graft N-isopropyl acrylamide (NIPAA) brushes onto ‘self-standing’ isotactic polypropylene (iPP) film surface via iPP-Br macro-initiator. The successful accomplishment of surface grafting is understood from the UV-Vis, ATR-FTIR, XPS, SEM analysis and contact angle measurements of the modified samples. The ability to control the degree of grafting of NIPAA brushes reaffirms the elegance of the surface initiated ATRP technique to develop tailor-made polymer surfaces. The LCST nature of the NIPAA brushes would introduce stimuli responsive character onto the surface of the iPP films used for various specialty applications, especially for biomedical purposes.     

Functionalization of fluoropolymer surfaces with nanopatterned polyelectrolyte brushes

We present a strategy to combine the excellent bulk properties of fluoropolymer substrates with the wide range of functionalities of surface-grafted polyelectrolyte brushes. Patterns of radicals serving as initiators were created by irradiation with extreme ultraviolet light (EUV) in an interference setup at the Swiss Light Source. From these initiators, brushes of poly(methacrylic acid) or poly(4-vinylpyridine) were grafted in one step by free-radical polymerization. Brushes carrying primary or secondary amines, i.e. poly(vinylamine), poly(allylamine) and poly(N-methyl-vinylamine), were obtained by grafting vinylformamide and acrylonitrile followed by hydrolysis or reduction. Periodic patterns with a resolution of 200 nm were achieved, while the thickness of the brushes in unpatterned areas could be controlled over a range of several hundred nanometers by variation of EUV dose and grafting parameters. The maximum dry brush thickness was used to estimate the average molecular weight of the polymer chains.     

Grafting of pH-sensitive poly (N,N-dimethylaminoethyl methacrylate-co-2-hydroxyethyl methacrylate) onto HNTS via surface-initiated atom transfer radical polymerization for controllable drug release

Copolymer brushes composed of N,N-dimethylaminoethyl methacrylate (DMAEMA) and 2-hydroxyethyl methacrylate (HEMA) were tethered on the surface of HNTs (HNTs) through surface-initiated atom transfer radical polymerization (SI-ATRP). ATRP initiator was anchored to surface and copolymers were synthesized from surface with different compositions of monomers. Successful grafting of copolymer brushes was approved by FTIR, TGA, XPS, FE-SEM, TEM, and N₂ adsorption-desorption.¹H NMR was used to determine the composition of copolymers. pH-sensitive properties of copolymer-grafted nanotubes were investigated by UV-visible absorbance in different pH values. Finally, loading and in vitro drug release from neat and copolymer-grafted HNTs were investigated using diphenhydramine hydrochloride as a model drug. Incorporation of DMAEMA to structure of polymers led to pH sensitivity of grafted-copolymers and controlled release of drug upon varying the pH of release medium. pH-dependent drug release showed that drug release was increased by decreasing pH of release medium and increasing DMAEMA content.     

Hydrophilic modification of P(VDF-co-CTFE) porous membranes

This paper describes fabrication of a poly(vinylidene difluoride-co-chlorotrifluoroethylene) (P(VDF-co-CTFE)) porous membrane via non-solvent induced phase inversion and subsequent hydrophilic modification using high efficient surface initiated atom transfer radical polymerization (ATRP). The effect of viscosities of casting solutions on microstructures of the P(VDF-co-CTFE) membrane was investigated. The surface chemistry, thermal stability, morphological structure, and hydrophilicity of the modified membranes were evaluated by Fourier Transform Infrared Attenuated Total Reflection (FTIR-ATR), Differential Scanning Calorimeter (DSC), Scanning Electron Microscope (SEM), and contact angle measurements, respectively. The degree of grafting and the degree of swelling were measured to analyze the effect of polymerization time on the wettability. The mechanical strength of the membranes after modification was also investigated. The permeability and fouling resistance were evaluated according to pure water flux and protein solution filtration measurements. The results demonstrate that the hydrophobic P(VDF-co-CTFE) membrane can be feasibly modified by immobilization of hydrophilic poly(ethylene glycol) methyl ether methacrylate (PEGMA) brushes via surface initiated ATRP.     

Synthesis of PLLA‐PEOMA comb‐block‐comb type molecular brushes based on AGET ATRP and ring‐opening polymerization

BACKGROUND: Molecular brushes are types of macromolecules with densely grafted side chains on a linear backbone. The synthesis of macromolecular brushes has stimulated much interest due to their great potential in applications in various fields. Poly(L ‐lactide)–poly(ethylene glycol) methyl ether methacrylate (PLLA‐PEOMA) comb‐block‐comb molecular brushes with controlled molecular weights and narrow molecular weight distributions were successfully synthesized based on a combination of activator generated by electron transfer (AGET) atom transfer radical polymerization (ATRP) and ring‐opening polymerization. The synthetic route is a combination of the ‘grafting through’ method for AGET ATRP of the PEOMA comb block and the ‘grafting from’ method for the synthesis of the PLLA comb block. Poly(2‐hydroxyethyl methacrylate) (PHEMA) was synthesized by ATRP, and PLLA side chains and PEOMA side chains were grown from the backbones and the terminal sites of PHEMA, respectively. RESULTS: The number‐average degrees of polymerization of PLLA chains and poly[poly(ethylene glycol) methyl ether methacrylate] (PPEOMA) comb blocks were determined using ¹H NMR spectroscopy, and the apparent molecular weights and molecular weight distributions of the brush molecules were measured using gel permeation chromatography. The crystallization of the components in the comb‐block‐comb copolymers was also investigated. The crystallization of PLLA side chains is influenced by PLLA chain length and the content of PPEOMA in the molecular brushes. The comb‐block‐comb copolymer composed of hydrophobic PLLA and hydrophilic PEOMA can self‐assemble into a micellar structure in aqueous solution. CONCLUSION: A combination of AGET ATRP and ring‐opening polymerization is an efficient method to prepare well‐defined comb‐block‐comb molecular brushes. The physical properties of the molecular brushes are closely related to their structures. Copyright © 2009 Society of Chemical Industry     

pH and salt responsive poly(N,N-dimethylaminoethyl methacrylate) cylindrical brushes and their quaternized derivatives

We present the synthesis and characterization of poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) cylindrical brushes, their pH responsiveness, and the corresponding quaternized analog, poly{[2-(methacryloyloxy)ethyl] trimethylammonium iodide} (PMETAI) brushes. PDMAEMA brushes were prepared by atom transfer radical polymerization (ATRP) using the grafting-from strategy. Initiating efficiencies of the ATRP processes were determined by cleaving the side-chains and gel permeation chromatography (GPC) analysis. Due to the slow initiation and steric hindrance, the initiating efficiency is only around 50%. The PDMAEMA brushes show worm-like structures and pH responsiveness, as proven by dynamic light scattering (DLS), atomic force microscopy (AFM), and cryogenic transmission electron microscopy (cryo-TEM) measurements. Strong cationic polyelectrolyte PMETAI brushes were produced by quaternization of the PDMAEMA brushes. AFM and cryo-TEM images showed similar worm-like morphologies for the PMETAI brushes. The PMETAI brushes collapsed in solution with high concentration of monovalent salt, as proven by DLS and AFM results.