共查询到20条相似文献,搜索用时 687 毫秒
1.
2.
姚楠 《建设机械技术与管理》2010,23(6):120-123
随着电子技术、软件技术、计算机的应用不断发展进步,搅拌站控制系统也随着有了较快的发展。关于搅拌站控制系统的好坏直接影响到搅拌站整体的生产效率和质量,其可靠性和可操作性能否满足用户生产各种标号的混凝土生产的重要指标,也是作为一个搅拌站能否具有强有力竞争的重要所在。 相似文献
3.
4.
5.
混凝土搅拌站是整个混凝土生产过程中最重要的环节,它直接决定了生产出来的混凝土的质量,所以在建造混凝土搅拌站和生产混凝土的时候需要我们对各个方面都进行详细的设计,尤其是其中的管理与成本控制方面,因为这二者决定了整个混凝土搅拌站的投入生产比.本文从多个方面对混凝土搅拌站的管理与成本控制进行了分析,重点论述了混凝土搅拌站的管... 相似文献
6.
7.
本文简要介绍了我国混凝土和搅拌站行业发展概况,从部门监管的角度,对目前混凝土搅拌站生产经营中容易发生的违法问题和由此产生的法律责任进行了剖析。指出了在生产经营活动中应注意的问题,对怎样提高混凝土搅拌站质量管理水平,避免被动违法,提出了对策建议。以期促进混凝土搅拌站行业的健康、理性发展。 相似文献
8.
结合新西兰基督城ASHBY’S搅拌站的安全规范,从作息时间、绿色环保、节能与交通运输三方面,论述了该搅拌站的生产理念,并对其整个运行系统及管理模式进行了介绍,指出ASHBY’S搅拌站绿色环保、人性化管理的生产理念值得借鉴学习。 相似文献
9.
随着商品硷在我国大中小城市的迅速普及,各种硷搅拌站如同雨后春笋般崛起,各建筑机械厂家纷纷推出各种型号的搅拌站设备。根据笔者从事搅拌站工作10余年的经验认为,各厂家设计的搅拌站普遍存在一些缺点:①生产效率较低,在同等生产设备的基础上,如何提高生产效率, 相似文献
10.
11.
为了获得合适的陶粒泡沫混凝土墙板生产工艺参数,进行了自密实陶粒泡沫混凝土墙板工厂生产试验。结果表明:混凝土的坍落扩展度是生产中的关键参数,当其达到SF1级自密实混凝土性能要求时,所生产墙板的完整性好,但是表面缺陷较多;而达到SF2级自密实混凝土性能要求时,所生产墙板的质量好,表面缺陷少;混凝土的工作性越好,累计破泡率越小。 相似文献
12.
分析了高透水混凝土的配合比设计步骤,着重讨论了水灰比对高透水混凝土强度和透水性能的影响,指出制备高透水混凝土时,使水泥浆液包裹在骨料表面,而又不产生浆液流动,可为高透水混凝土的制作与应用提供参考。 相似文献
13.
从施工配合比的角度看,三级配泵送混凝土相对于二级配泵送混凝土较为经济,但三级配泵送混凝土在施工过程中常遇到堵管、卡管现象而影响施工.通过掌握三级配泵送混凝土的材料制备、运输、铺筑等一套完整的工艺流程,针对混凝土输送泵各种有关的施工工艺参数来调整混凝土配合比,验证该施工工艺生产的泵送混凝土各项技术指标是否能达到设计要求,以指导三级配泵送混凝土施工. 相似文献
14.
本文研究超量掺入粉煤灰替代部分细骨料,低量掺入矿粉,即"一超一低法"单独使用特细砂配制泵送混凝土,来解决由于特细砂颗粒偏细、比表面积大等造成混凝土粘性大、流动度降低、混凝土收缩增加而导致特细砂配制混凝土泵送难、易开裂的技术问题,对于生产混凝土用细骨料的应用广度及合理利用地方自然资源、降低混凝土生产成本、节约资源具有一定的社会效应和经济效益。 相似文献
15.
CL结构墙体混凝土现浇施工技术要点分析 总被引:2,自引:0,他引:2
针对CL结构墙体混凝土现浇施工技术,提出了生产特点、施工工艺原理及工艺流程,对CL网架板苯板位移的控制、自密实混凝土的浇筑与养护、聚苯板位移质量捡测,主要材料及机具设备的选用等技术要点作了重点阐述和分析.施工中如何采用高强度垫块、自密奕混凝土浇注时"一点下料"及整体推进技术、厚侧插钢管控制混凝土流速、窗口处留排气孔、预留30mm×30mm苯板块等是鏊个施工中的关键点. 相似文献
16.
本文着重介绍了利用炉渣、粉煤灰等工业废渣生产轻质隔墙板的情况,研究了不同品质的炉渣对混凝土性能的影响,同时介绍了生产轻质板材的工艺流程及经济效益分析。 相似文献
17.
The use of self-compacting concrete (SCC) with its improving production techniques is increasing every day in concrete production. However, mix design methods and testing procedures are still developing. Mix design criterions are mostly focused on the type and mixture proportions of the constituents. Adjustment of the water/cement ratio and superplasticizer dosage is one of the main key properties in proportioning of SCC mixtures. In this study, five mixtures with different combinations of water/cement ratio and superplasticizer dosage levels were investigated. Several tests such as slump flow, V-funnel, L-box were carried out to determine optimum parameters for the self-compactibility of mixtures. Compressive strength development, modulus of elasticity and splitting tensile strength of mixtures were also studied. 相似文献
18.
This study presents an approach for improving the operations of production and delivery in ready-mixed concrete (RMC) plants. A network flow method is applied to formulate the integrated scheduling problem of ready-mixed concrete production and delivery with trucks and pumps, where the demands of construction sites are in certain time windows. A method is developed that applies a genetic algorithm in which the chromosome consists of three sequences (construction sites, delivery order and vehicle IDs); operators work on the sequences of construction sites. The approach is evaluated by simulation of real cases. Comparison with combinations of other priority rules for scheduling production and vehicles demonstrates the effectiveness of the genetic algorithm. Sensitivity analysis reveals the effects of the fleet size of an available vehicle, the cost rates and the time windows of construction sites. The model and algorithm may be helpful for practical integrated operations for operation management at RMC plants. 相似文献
19.
RHEOPLUS:新改良聚羧酸醚类外加剂 总被引:3,自引:1,他引:2
新一代聚羧酸醚类(PCE)减水剂RHEOPLUS已成功开发。研究发现,REOPLUS与多种水泥兼容性良好,主要表现在掺量的高效性和良好的坍落度保持能力。其卓越的性能也同样体现在高流动混凝土的应用中,即良好的泵送性、和易性、抗离析和坍落度/流动度保持能力等。此外,RHEOPLUS对早期强度的改善也为其在预制构件中的应用带来了优势。相关研究正在进行,并已取得了一些阶段性成果。 相似文献
20.
《Construction and Building Materials》2008,22(4):532-540
In this study, waste automobile tyres in two different sizes were used in production of rubberized fresh concretes. Their unit weight and flow table values were determined experimentally. The values determined were also found when artificial neural networks (ANN) and fuzzy logic (FL) models were employed. According to the given rubberized concrete data, it was demonstrated that properties of fresh concrete could be determined without attempting any experiments by using ANN and FL models. During the tests similar results were observed for experimental results with those of ANN and FL models. Besides, the facts that lighter concrete might be produced using tyre as a light material and waste tyres may be recycled this way were put forth. 相似文献