Surface patterning of micron-sized aluminum flakes by seeded dispersion polymerization: Towards waterborne colored pigments by gold nanoparticles adsorption

The concomitant polymer embedding and surface patterning of micron-sized aluminum flakes by dispersion polymerization of styrene is reported. The aluminum pigments coated by a thin silica layer were modified by trimethoxysilylpropyl acrylate grafting (TMSPA-grafted Al@silica). Dispersion polymerization of styrene was further performed in alcoholic or hydro-alcoholic media in the presence of the organically modified TMSPA-grafted Al@silica pigments as a seed and poly(N-vinylpyrrolidone) (PVP) as a steric stabilizer to lead to hybrid aluminum flakes. The weight fraction of polymer onto the aluminum pigment surface was tuned from 14 to 29 wt.% by the hydro-alcoholic continuous phase composition and from 19 to 38 wt.% by the initiator content. The chemical nature of the initiator plays an important role in the surface patterning of the hybrid aluminum flakes as 2,2′-azobis(isobutyronitrile) initiator provided polymer nodules, i.e. due to a pattern of polymer protrusions with nodules shape at the surface of the inorganic substrate, while a flat and continuous polymer layer was obtained with 2,2′-azobis(2-amidinopropane) dihydrochloride initiator. Moreover, the introduction of ammonium groups at the surface of the polymer particles was possible by the delayed addition of a cationic acrylate co-monomer ([2-(acryloyloxy)ethyl]-trimethylammonium chloride) rendering the pigments dispersible in water. Finally, gold nanoparticles were successfully deposited onto the micro-patterned aluminum flakes to open the way towards new colored aluminum pigments. Both location of cationic ammonium function in the polymer nodule and nature of gold nanoparticles ligands were investigated with the aim to evaluate the amount of adsorbed gold nanoparticles. The final hierarchically patterned aluminum pigments dispersed in water exhibited an intense purple color.     

Morphology of Organic–Inorganic Hybrid Composites in Thin Films as Multichip Packaging Material

Silica–polyimide hybrid composites were prepared via a sol–gel process and thermal imidization. Two different types of soluble precursors, poly(amic acid) (PAA) and poly(amic diethyl ester) (ES), chemically convertible to poly(p-phenylene biphenyltetracarboximide), were used as organic polymer matrix component, and tetraethoxysilane (TEOS), convertible to silica, as the inorganic component. The structure of composites prepared as thin films was investigated by means of small-angle X-ray scattering, scanning electron microscopy and atomic force microscopy. Nanometre-scale composites were successfully obtained for ≤30wt% TEOS-loaded mixtures with ES and PAA. It was considered from the microstructural investigation that the composite films based on ES were not significantly affected by the inorganic particles generated, maintaining the structure of the homopolyimide, while those based on PAA did not preserve the structure due to the nanoparticles grown in situ during the sol–gel process. © 1997 SCI.     

Synthesis of poly(styrene-co-maleimide) and poly(octadecene-co-maleimide) nanoparticles and their utilization in paper coating

Aqueous polymer dispersions comprising of poly(styrene-co-maleimide) (SMI) or poly(octadecene-co-maleimide) (OMI) nanoparticles were synthesized by thermal imidization of the corresponding maleic anhydride copolymer precursors with ammonia using an organic solvent free process. Different reaction parameters such as temperature, time, agitation speed and stirrer geometry, and molar ratio of ammonia-to-anhydride were investigated in order to find optimal conditions. The obtained copolymer nanoparticles exhibited glass transition temperatures (T_g's) between 140 and 170 °C with particle sizes ranging from 50 to 230 nm. The compositional analysis was conducted by recording ¹H NMR and ATR-FTIR spectra. In addition, SMI dispersions were successfully spray dried and analyzed by SEM. Finally, the polymer dispersion's utility as auxiliary organic pigment in paper coating formulations was evaluated.     

Synthesis of poly(styrene-co-maleimide) and poly(octadecene-co-maleimide) nanoparticles and their utilization in paper coating

Aqueous polymer dispersions comprising of poly(styrene-co-maleimide) (SMI) or poly(octadecene-co-maleimide) (OMI) nanoparticles were synthesized by thermal imidization of the corresponding maleic anhydride copolymer precursors with ammonia using an organic solvent free process. Different reaction parameters such as temperature, time, agitation speed and stirrer geometry, and molar ratio of ammonia-to-anhydride were investigated in order to find optimal conditions. The obtained copolymer nanoparticles exhibited glass transition temperatures (T_g's) between 140 and 170 °C with particle sizes ranging from 50 to 230 nm. The compositional analysis was conducted by recording ¹H NMR and ATR-FTIR spectra. In addition, SMI dispersions were successfully spray dried and analyzed by SEM. Finally, the polymer dispersion's utility as auxiliary organic pigment in paper coating formulations was evaluated.     

高岭土的球磨疏水改性及其在海藻酸盐凝胶微球中的应用

为了提高高岭土(KL)对疏水性有机农药的亲和力,以聚甲基氢硅氧烷(PMHS)作为疏水改性剂,采用球磨法改性KL。进而,采用负压冷冻干燥技术将甲氨基阿维菌素苯甲酸盐(EB)负载到改性高岭土颗粒上,然后包覆于海藻酸盐基质中制得载药改性高岭土/海藻酸钙复合凝胶微球(MKL-CA-CMBs)。通过Zeta电位及激光粒度仪、FTIR、SEM、XRD、比表面积及孔径分析仪对改性后KL的结构、形貌和性能进行了表征,同时对MKL-CACMBs的载药和释药性能也进行了考察。结果表明,在球磨机械力作用下,PMHS以物理吸附或化学吸附的方式吸附于KL颗粒表面。改性后的KL粒径减小、比表面积增大,疏水性增强,利于疏水有机农药的负载,使高岭土/海藻酸钙复合凝胶微球(KL-CA-CMBs)的载药率(DLR)和包封率(EE)分别由6.5%和53.1%增长至9.7%和72.5%。MKL-CA-CMBs所具有的缓释性能主要基于MKL对疏水有机农药的亲和能力,剂型的释放模型属于Non-fickian扩散模型。     

Fabrication of polyimide/titania nanocomposites containing benzimidazole side groups via sol–gel process

In recent years, polyimide (PI) hybrid materials have received considerable attention owing to the dramatic enhancements over their pristine state in thermal stabilities, mechanical properties and other special features by introducing only a small fraction of inorganic additives. In this investigation, hybrid nanocomposite films of titanium dioxide (TiO₂) in PI were successfully fabricated by an in situ sol–gel process starting from tetraethyl orthotitanate in the solution of poly(amic acid) in N,N-dimethylacetamide. Neat PI was prepared from the polymerization of 2-(3,5-diaminophenyl)-benzimidazole and pyromellitic dianhydride. The hybrid films were obtained by the hydrolysis–polycondensation of moisture-sensitive titania precursor in poly(amic acid) solution, followed by the elimination of solvents and imidization process. The chelating agent, acetylacetone, was used to reduce the gelation rate of titanium alkoxide. The complete imidization temperature of the poly(amic acid) was delayed; furthermore, the thermal stability of PI was enhanced through the incorporation of the inorganic moieties in the hybrid materials. The chemical and morphological structures of the hybrid materials were characterized by Fourier transform infrared spectroscopy, X-ray diffraction, field emission scanning electron microscopy and transmission electron microscopy. The results show that the TiO₂ particles are well dispersed in the PI matrix with particle size between 15 and 30 nm in diameter.     

Effect of ceria and zirconia nanoparticles on corrosion protection and viscoelastic behavior of hybrid coatings

Organic–inorganic hybrid nanocomposite coatings contain inorganic particles that are dispersed in organic phase in nanometric dimensions. Ceria and zirconia colloidal dispersions are uniformly distributed in the epoxy silica-based hybrid nanocomposite by sol–gel method and coated on 1050 aluminum alloy substrate with spin-coating technique. The hybrid sol is prepared by organic–inorganic precursors formed by hydrolysis and condensation of 3-glycidoxypropyltrimethoxysilane and tetraethylorthosilicate (TEOS) in acidic solution using bisphenol A as networking agent and 1-methylimidazole as initiator in the presence of various ratios of ZrO₂ and CeO₂ colloidal nanoparticles. Particle size distribution, surface morphology and inorganic components distribution were determined by scanning electron microscopy (SEM) and EDXA techniques. SEM and Si, Zr, Ce mapping micrographs proved the uniform distribution of nanoparticles in the coatings. Transmission electron microscopy indicated that the nanoparticles dimension stay at the nanoscale level. The glass transition temperature (T _g) and loss properties (damping) of coatings were evaluated by dynamic mechanical thermal analysis. The corrosion protection of the coatings on the 1050 AA substrate was studied by potentiodynamic measurements. The results indicated that by introducing ceria nanoparticles in 1:1 molar ratio to TEOS in coating composition, corrosion protection was improved. However, the simultaneous presence of two nanoparticles (i.e., ceria and zirconia in 1:1 molar ratio) in the coating compositions increased the corrosion protection efficiency up to 99.8 %. The multiple glass transitions and shifting to higher and wide range of temperatures by adding ceria and zirconia nanoparticles indicated a better network interaction between inorganic nanoparticles and organic molecular chains which also led to better corrosion protection of the coating in this composition.     

Synthesis and characterization of bionanocomposites of poly(lactic acid) and TiO2 nanowires by in situ polymerization

Bionanocomposites from biopolymers and inorganic nanoparticles are of great interest for packaging materials due to their enhanced physical, thermal, mechanical, and processing characteristics. In this study, poly(lactic acid) (PLA) nanocomposites with covalent bonding between TiO₂ nanowire surface and PLA chains were synthesized through in situ melt polycondensation. Molecular weight, structure, morphology, and thermal properties were characterized. Fourier transform infrared spectroscopy confirmed that PLA chains were covalently grafted onto TiO₂ nanowire surface. Transmission electron microscopy images also revealed clearly a third phase presence on the nanowires after the grafting process. Those grafted PLA chains exhibited significantly increased glass transition temperature and thermal stability, compared with pure PLA. The weight-average molecular weight of PLA/2% TiO₂ nanowire bulk nanocomposites increased by 66% compared with that of pure PLA. The electron microscopy results showed that strong interfacial interaction and homogeneous distribution were achieved between inorganic nanowires and organic PLA matrix in the bulk nanocomposites. The PLA matrix in bulk nanocomposites exhibited elevated glass transition temperature and decreased crystallization ability as the TiO₂ nanowire concentrations were increased from 0 to 2%.     

New macromolecular silane coupling agents synthesized by living anionic polymerization; grafting of these polymers onto inorganic particles and metals

New macromolecular silane coupling agents, which are end-triethoxysilylated poly(styrene) and poly(tert-butylmethacrylate), were investigated as possible inorganic particle and metal surface treatment agents. These polymers containing poly(styrene) and poly(tert-butylmethacrylate) as the main chain, were prepared by living anionic polymerization. Grafting of the polymers onto inorganic particles and metals was performed via the hydrolysis of the triethoxysilyl group using either acidic or basic catalyst. n-Butylphosphate was used as the catalyst for grafting onto inorganic substances having an acidic surface such as silica. However, in the case of grafting onto inorganic substances having a basic surface, tetrabutylammoniumhydroxide was employed as the catalyst. Contrary to expectations, grafting onto titania was successful even in the absence of a catalyst. Particles grafted with these polymers showed excellent dispersibility in organic medium, in which the polymers are soluble. This phenomenon is in contrast to that for particles treated with polymers possessing triethoxysilyl groups at random positions of the chain or those treated with trimethylsilyl groups. Surface tension measurements of metal substrates coated with the grafted polymers, were found to be identical to the values obtained for the bulk polymers.     

The situ preparation of silica nanoparticles on the surface of functionalized graphene nanoplatelets

A method for situ preparing a hybrid material consisting of silica nanoparticles (SiO₂) attached onto the surface of functionalized graphene nanoplatelets (f-GNPs) is proposed. Firstly, polyacrylic acid (PAA) was grafted to the surface of f-GNPs to increase reacting sites, and then 3-aminopropyltriethoxysilane (APTES) KH550 reacted with abovementioned product PAA-GNPs to obtain siloxane-GNPs, thus providing reaction sites for the growth of SiO₂ on the surface of GNPs. Finally, the SiO₂/graphene nanoplatelets (SiO₂/GNPs) hybrid material is obtained through introducing siloxane-GNPs into a solution of tetraethyl orthosilicate, ammonia and ethanol for hours'' reaction. The results from Fourier transform infrared spectroscopy (FTIR) showed that SiO₂ particles have situ grown on the surface of GNPs through chemical bonds as Si-O-Si. And the nanostructure of hybrid materials was characterized by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). All the images indicated that SiO₂ particles with similar sizes were grafted on the surface of graphene nanoplatelets successfully. And TEM images also showed the whole growth process of SiO₂ particles on the surface of graphene as time grows. Moreover, TGA traces suggested the SiO₂/GNPs hybrid material had stable thermal stability. And at 900°C, the residual weight fraction of polymer on siloxane-GNPs was about 94.2% and that of SiO₂ particles on hybrid materials was about 75.0%. However, the result of Raman spectroscopy showed that carbon atoms of graphene nanoplatelets became much more disordered, due to the destroyed carbon domains during the process of chemical drafting. Through orthogonal experiments, hybrid materials with various sizes of SiO₂ particles were prepared, thus achieving the particle sizes controllable. And the factors’ level of significance is as follows: the quantity of ammonia > the quantity of tetraethyl orthosilicate (TEOS) > the reaction time.     

Role of silane coupling agents for performance improvement of poly(vinyl acetate)/tetraethyl orthosilicate hybrid composites prepared by a sol–gel process

Silica based poly(vinyl acetate)/inorganic hybrid composites were prepared via a sol–gel process under acidic conditions. Because the phase behaviour of the hybrids is greatly affected by weak interactions such as hydrogen bonding between organic polymer and inorganic network, two types of silane coupling agent (vinyl trimethoxysilane and 3‐(trimethoxysilyl)propyl methacrylate) were used to introduce specific interactions and to control phase behaviour in the interface between polymer and silica. The interfacial interactions between polymer and inorganic segment in the presence of silane have been investigated by Fourier transform infrared spectroscopy. Thermogravimetric analysis shows that the thermal stability of organic components in the hybrids is enhanced by addition of silane coupling agents. Scanning electron micrographs reveal that silica particles are homogeneously dispersed in the organic matrix as a result of the specific interactions. © 2001 Society of Chemical Industry     

包核法对有机颜料改性技术进展

综述了近年来包核法技术在有机颜料改性方面的进展,重点介绍了有机包核颜料的制备机理,以及以S iO2、TiO2和其他一些无机物对有机颜料进行包覆的实例。对有机包核颜料的应用前景进行了展望。     

Preparation of nickel coating on ZTA particles by electroless plating

With the aim to effectively improve the interface between ZrO₂ toughened Al₂O₃ (ZTA) particles and metal matrix, nickel was deposited on the surface of ZTA particles by electroless plating method. Formation mechanism of nickel coating and effects of the solution pH, loading capacity of ZTA particles and temperature on the nickel deposition were investigated. Microstructures, thickness and element distributions of nickel coating were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS). The results showed that the nickel was successfully deposited on the surface of ZTA particles by electroless plating without noticeable defects. The process of electroless nickel plating could be explained by combination of atomic hydrogen and electrochemistry theories. The interfacial nucleation of nickel is easier to form than spontaneous nucleation in the solution. Deposited Nickel has priority on the surface of ZTA particles comparing to that in solution. The optimal conditions to coat nickel on the surface of ZTA particles are: solution pH 4.7–4.8, loading capacity 15–20?g/L, and electroless plating temperature 85?°C. The ZTA particle reinforced iron matrix composites prepared by powder metallurgy could have better interfacial bonding between ZTA particle and iron matrix because of the nickel coating on the surface of ZTA particle. Nickel diffuses into the iron matrix during the sintering preparation of composite materials. The interface between ZTA particle and iron matrix presents the evidence of non-chemical bonding.     

Synthesis and characterization of nanosilica/polyacrylate composite latex

The nanosilica/polyacrylate organic–inorganic composite latex was synthesized by in‐situ emulsion polymerization of methyl methacrylate (MMA) and butyl acrylate (BA) in the presence of silica nanoparticles, which were modified by silane coupling agent. The surface properties and dispersibility of silica nanoparticles modification, chemical structure, Zeta potential, diameter distribution of the composite latex prepared, surface roughness, and thermal stability of the hybrid film formed by the composite latex were investigated by fourier transform infrared spectrometer (FTIR), transmission electron microscopy (TEM), Zeta meter, ZetaPlus apparatus (dynamic light scattering method), atomic force microscopy (AFM), and thermogravimetric analysis (TGA), respectively. After modification with silane coupling agent, silane was grafted onto the surface of silica nanoparticles to form the organic layers, which was able to efficiently prevent the silica nanoparticles from aggregating to individually homogeneous disperse in the in‐situ emulsion polymerization system and improve the compatibility of silica nanoparticles with the acrylate monomers. The nanosilica/polyacrylate organic–inorganic composite latex prepared had the properties of silica nanoparticles and pure polyacrylate latex but was not simply a combination. Strong chemical bonding tethered the silica and acrylate chains to form the core/shell structural composite latex. Consequently, the hybrid film formed by nanosilica/polyacrylate composite latex exhibited a smooth surface and better thermal properties than the pure polyacrylate film. POLYM. COMPOS. 27:282–288, 2006. © 2006 Society of Plastics Engineers     

Hydrothermal synthesis and in situ surface modification of boehmite nanoparticles in supercritical water

In situ surface modification of boehmite (AlOOH) nanoparticles during hydrothermal synthesis in supercritical water was examined by adding CH₃(CH₂)₄CHO and CH₃(CH₂)₅NH₂ as modifier reagents to the reactants. Changes in surface properties of the nanoparticles by surface modification was observed by FTIR, dispersion in solvents and TEM analyses, which demonstrated that reagents chemically binded onto the surface of the AlOOH nanoparticles. The results of SEM and TEM pictures show that the surface modification affects crystal growth and reduces the particle size and changes the morphology of the particles.     

A simple method to generate spontaneous chemisorption of metallic particles mediated by carboxylate groups from silylated oligomeric poly(amide‐imide)s

The present work describes oligomeric poly(amide‐imide)s (PAIs) containing several l ‐amino acidic residues and two silicon atoms in their repeat unit, whose carboxylate terminal group was chemisorbed onto metallic particles (Cu, Ag or Au) previously deposited in controlled conditions via physical vapor deposition. Thus, for each prepared polymer–metallic hybrid, the surface morphology, particle size distribution, and percentage of organic material, silicon and metal were studied using scanning electron microscopy and energy‐dispersive X‐ray spectroscopy. The results show that the hybrids are formed probably via electrostatic interaction between the carboxylate anions of the PAIs and nanoparticle cations. This bridging ligand was visualized using Raman spectroscopy and corroborated with X‐ray diffraction. Optical studies and resistivity measurements (conductivity) of each hybrid were developed using UV‐visible and the four‐point probe method, respectively. X‐ray photoelectron spectroscopy was used to study the oxidation states of the metallic particles at surface level. Thus, a simple and spontaneous protocol is proposed for the preparation of metallic particles stabilized in situ by an oligomer, a procedure that takes place from seconds to a few minutes. Finally, particle diameters were measured using atomic force microscopy in order to study possible agglomeration of the metallic particles with time. © 2017 Society of Chemical Industry     

Synthesis and characteristics of poly(methyl methacrylate-methacrylic acid-3,3-(trimethoxysilyl) propyl methacrylate) hollow latex particles and their application to drug carriers

In this study, the hollow latex particle was synthesized by three processes. The first process was to synthesize the poly(methyl methacrylate-co-methacrylic acid) (poly(MMA-MAA)) copolymer latex particles by the method of soapless emulsion polymerization. Following the first process, the second process was to polymerize MMA, MAA, 3,3-(trimethoxysilyl) propyl methacrylate (MPS), and ethylene glycol dimethacrylate in the presence of poly(MMA-MAA) latex particles to form the linear poly(MMA-MAA)/crosslinking poly(MMA-MAA-MPS) core–shell latex particles. In the third process, the core–shell latex particles were heated in the presence of ammonia to form the poly(MMA-MAA-MPS) hollow latex particles. A sufficient heating time and high-heating temperature were necessary for the ammonia to dissolve the linear poly(MMA-MAA) core to form a perfect hollow structure. The crosslinking poly(MMA-MAA-MPS) shell was a barrier for the ammonia to diffuse into the latex particles so that the latex particle with the high-crosslinking shell showed an imperfect hollow structure. Besides, the hollow poly(MMA-MAA-MPS) latex particles reacted with ZnO nanoparticles, which were synthesized by a traditional sol-gel method, to form the polymer/inorganic poly(MMA-MAA-MPS)/ZnO composite hollow latex particles. With the increase of crosslinking degree would increase the amount of ZnO bonding. Moreover, the poly(MMA-MAA-MPS) hollow latex particles were used as carriers to load with the model drug, caffeine. The release of caffeine from poly(MMA-MAA-MPS) hollow latex particles was investigated.     

Preparation of monodispersed PNIPAm/silica composites and characterization of their thermal behaviors

Two types of thermosensitive poly(N-isopropylacrylamide) (PNIPAm)-silica organic/inorganic hybrid particles were successfully prepared in aqueous solution through a facile synthetic process. Silane coupler of vinyl organic groups connects the PNIPAm to silica. First, hybrid spheres were prepared by grafting PNIPAm polymers to VTMS (vinyl trimethoxysilane) silica spheres. The thickness of polymer shell on the silica surfaces could be easily controlled by varying the concentrations of NIPAm monomer. Second, another type of hybrid particle was fabricated by encapsulating PNIPAm polymer with silica materials. The PNIPAm polymers were completely encapsulated by silica shell. The morphologies and shell thickness were characterized through SEM and TEM. The variations of phase transition temperature of PNIPAm were measured using DSC.     

Preparation and properties of poly(siloxane‐ether‐urethane)‐acrylic hybrid emulsions

Poly(siloxane‐ether‐urethane)‐acrylic (PU‐AC) hybrid emulsions were prepared by introducing different hydroxyethoxypropyl‐terminated polydimethylsiloxane (PDMS) content into the acrylic‐terminated poly(ether‐urethane) backbone and then in situ copolymerizing with methyl methacrylate and butyl acrylate via emulsion process. The effects of PDMS on the particle size and viscoelastic behavior of the hybrid emulsions were investigated. Meanwhile, the hydrogen bonding, mechanical and thermal mechanical properties, water resistance, the surface gloss, and wettability of the resultant hybrid films were also studied. The results showed that all the hybrid emulsions showed shear‐thinning behaviors, and the introduction of PDMS resulted in the formation of the hybrid emulsions with increased average particle size and decreased viscosity. The chemical bonds built between PU and AC yielded higher than 73% crosslinking fraction in all the hybrid materials, but this value decreased with increasing PDMS content because PDMS reduced the hydrogen bonding interactions and enhanced the phase separation. As a result, an increase in the PDMS content led to an increase in the elongation, water resistance, surface roughness, and water hydrophobic of the films, but the tensile strength, hardness, storage modulus, and glass transitions temperature decreased. It is suggested that introduction of PDMS can provide the hybrid materials with the improved flexibility, water resistance, and surface hydrophobicity, which has potential application value in the fouling‐release coatings, biomaterials, and surface fishing. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44927.     

Synthesis of hybrid materials via photopolymerization of benzoin functionalized silica nanoparticles

Photopolymerization of methyl methacrylate (MMA) was achieved on the surface of silica nanoparticles by “Grafting from” method. Well defined spherical silica nanoparticles prepared by Stöber method was functionalized with isocyanate groups of toluene di-isocyanate in order to achieve both improved dispersion of nanoparticles in organic solvents and further attachment of benzoin photoinitiator moieties onto the surface of silica nanoparticles. FTIR spectroscopy analysis confirmed the covalent bonding of the functional moieties and grafting of polymethylmethacrylate (PMMA) onto the surface of silica nanoparticles. Thermogravimetric analysis indicated the ratios of attached functionalities and PMMA grafting with a good agreement of SEM observations.