Fermentative hydrogen production by new marine Clostridium amygdalinum strain C9 isolated from offshore crude oil pipeline

The present study investigated hydrogen production potential of novel marine Clostridium amygdalinum strain C9 isolated from oil water mixtures. Batch fermentations were carried out to determine the optimal conditions for the maximum hydrogen production on xylan, xylose, arabinose and starch. Maximum hydrogen production was pH and substrate dependant. The strain C9 favored optimum pH 7.5 (40 mmol H₂/g xylan) from xylan, pH 7.5–8.5 from xylose (2.2–2.5 mol H₂/mol xylose), pH 8.5 from arabinose (1.78 mol H₂/mol arabinose) and pH 7.5 from starch (390 ml H₂/g starch). But the strain C9 exhibited mixed type fermentation was exhibited during xylose fermentation. NaCl is required for the growth and hydrogen production. Distribution of volatile fatty acids was initial pH dependant and substrate dependant. Optimum NaCl requirement for maximum hydrogen production is substrate dependant (10 g NaCl/L for xylose and arabinose, and 7.5 g NaCl/L for xylan and starch).     

Statistical optimization of fermentative hydrogen production from xylose by newly isolated Enterobacter sp. CN1

Statistical experimental designs were applied for the optimization of medium constituents for hydrogen production from xylose by newly isolated Enterobacter sp. CN1. Using Plackett–Burman design, xylose, FeSO₄ and peptone were identified as significant variables which highly influenced hydrogen production. The path of steepest ascent was undertaken to approach the optimal region of the three significant factors. These variables were subsequently optimized using Box–Behnken design of response surface methodology (RSM). The optimum conditions were found to be xylose 16.15 g/L, FeSO₄ 250.17 mg/L, peptone 2.54 g/L. Hydrogen production at these optimum conditions was 1149.9 ± 65 ml H₂/L medium. Under different carbon sources condition, the cumulative hydrogen volume were 1217 ml H₂/L xylose medium, 1102 ml H₂/L glucose medium and 977 ml H₂/L sucrose medium; the maximum hydrogen yield were 2.0 ± 0.05 mol H₂/mol xylose, 0.64 mol H₂/mol glucose. Fermentative hydrogen production from xylose by Enterobacter sp. CN1 was superior to glucose and sucrose.     

Biohydrogen production by Thermoanaerobacterium thermosaccharolyticum TERI S7 from oil reservoir flow pipeline

Thermophilic dark fermentative hydrogen producing bacterial strain, TERI S7, isolated from an oil reservoir flow pipeline located in Mumbai, India, showed 98% identity with Thermoanaerobacterium thermosaccharolyticum by 16S rRNA gene analysis. It produced 1450–1900 ml/L hydrogen under both acidic and alkaline conditions; at a temperature range of 45–60 °C. The maximum hydrogen yield was 2.5 ± 0.2 mol H₂/mol glucose, 2.2 ± 0.2 mol H₂/mol xylose and 5.2 ± 0.2 mol H₂/mol sucrose, when the respective sugars were used as carbon source. The cumulative hydrogen production, hydrogen production rate and specific hydrogen production rate by the strain TERI S7 with sucrose as carbon source was found to be 1704 ± 105 ml/L, 71 ± 6 ml/L/h and 142 ± 13 ml/g/h respectively. Major soluble metabolites produced during fermentation were acetic acid and butyric acid. The strain TERI S7 was also observed to produce hydrogen continuously up to 48 h at pH 3.9.     

Statistical optimization of biohydrogen and ethanol production from crude glycerol by microbial mixed culture

Design of Experiments (DoE) was applied to improve the ability of enriched activity sludge to efficiently convert crude glycerol from biodiesel industry into hydrogen and ethanol, using a very simple synthetic medium. Based on Plackett–Burman screening design, glycerol concentration, temperature and initial pH were identified as significant variables. Box–Behnken design and Response Surface Method (RSM) were then used for optimization. The maximum hydrogen yield of 0.96 mol H₂/mol glycerol was estimated at the temperature of 37.0 °C, initial pH of 7.9 and glycerol concentration of 15.0 g/L. Maximum hydrogen production rate of 2191 mL/L/d was estimated at the temperature of 37.3 °C, initial pH of 8.0 and glycerol concentration of 15.2 g/L. Finally maximum ethanol production of 7.92 g/L was estimated at an initial pH of 8.0 and glycerol concentration of 15.0 g/L (temperature had no significant effect). These results show that it is possible to obtain both, high yield and production of hydrogen and ethanol together, using a very simple synthetic medium, without trace element- and vitamin solution, tryptone or yeast extract.     

Biohydrogen production by Ethanoligenens harbinense B49: Nutrient optimization

A new hydrogen-producing bacterial strain Ethanoligenens harbinense B49 was examined for its capability of H₂ production with glucose as sole carbon source. The H₂ production was significantly affected by the concentration of the yeast powder and phosphate in the synthetic medium. The optimized concentration of yeast powder was 0.3–0.5 g/L and the maximum hydrogen yield was obtained at the concentration of phosphate about 100–150 mmol/L. The dynamics of hydrogen production showed that rapid evolution of hydrogen appeared to start after the middle-phase of exponential growth (about 8 h). The maximum H₂ yield and specific hydrogen production rate were estimated to be 2.26 mol H₂/mol glucose and 27.74 mmol H₂/g cell, respectively, when 10 g/L of glucose was present in the medium. The possible pathway of hydrogen production by Ethanoligenens sp. B49 during glucose fermentation was oxidative decarboxylation of pyruvate and the NADH pathway.     

Biological hydrogen production by extremely thermophilic novel bacterium Thermoanaerobacter mathranii A3N isolated from oil producing well

Hydrogen producing novel bacterial strain was isolated from formation water from oil producing well. It was identified as Thermoanaerobacter mathranii A3N by 16S rRNA gene sequencing. Hydrogen production by novel strain was pH and substrate dependent and favored pH 8.0 for starch, pH 7.5 for xylose and sucrose, pH 8.0–9.0 for glucose fermentation at 70 °C. The highest H₂ yield was 2.64 ± 0.40 mol H₂ mol glucose at 10 g/L, 5.36 ± 0.41 mol H₂ mol – sucrose at 10 g/L, 17.91 ± 0.16 mmol H₂ g – starch at 5 g/L and 2.09 ± 0.21 mol H₂ mol xylose at 5 g/L. The maximum specific hydrogen production rates 6.29 (starch), 9.34 (sucrose), 5.76 (xylose) and 4.89 (glucose) mmol/g cell/h. Acetate-type fermentation pathway (approximately 97%) was found to be dominant in strain A3N, whereas butyrate formation was found in sucrose and xylose fermentation. Lactate production increased with high xylose concentrations above 10 g/L.     

Optimization of photo-hydrogen production based on cheese whey spent medium

Cheese whey wastewater diluted to 10 g lactose/L was initially subjected to dark-fermentation by Enterobacter aerogenes MTCC 2822, and the VFAs-rich spent medium (acetic acid 1900 mg/L, butyric acid 537 mg/L, and traces of propionic acid) was subjected to photo-fermentation through enrichment by Ni²⁺ (0–8 μmol/L), Fe²⁺ (0–100 μmol/L) or Mg²⁺ (0–15 mmol/L) in batch mode by Rhodopseudomonas BHU 01 strain. The maximum cumulative H₂ production (144 ml) and yield (58 mmol) was obtained at 4 μmol Ni²⁺/L. Likewise, Fe²⁺ (60 μmol/L) resulted in maximum cumulative H₂ production (139 ml) and yield (56 mmol). Nevertheless, 6 mmol of Mg²⁺ did not significantly affect H₂ production (110 ml) or yield (44 mmol); the latter value in close proximity with the control (37 mmol). The concomitant reduction in COD was maximum (15.61%) for 4 μmol Ni²⁺/L, followed by 15.33% for 60 μmol Fe²⁺/L, and the least for 6 mmol Mg²⁺/L (14.5%). The observations suggest the role of Fe²⁺ and Ni²⁺ in regulation of nitrogenase and hydrogenase, while that of Mg²⁺ mainly in the biosynthesis of photopigment bacteriochlorophyll (Bchl).     

Influence of Cu concentration on the biohydrogen production of continuous stirred tank reactor

In this paper, the effect of hydraulic retention time (HRT, 16 h–4 h) on fermentative hydrogen production by mixed cultures was firstly investigated in a sucrose-fed anaerobic continuous stirred tank reactor (CSTR) at 35 °C and initial pH 8.79. After stable operations at HRT of 16–6 h, the bioreactor became unstable when the HRT was lowered to 4 h. The maximum hydrogen yield reached 3.28 mol H₂/mol-Sucrose at HRT 4 h. Supplementation of Cu²⁺ at HRT 4 h improved the operation stability through enhancement of substrate degradation efficiency. The effect of Cu²⁺ concentration ranging from 1.28 to 102.4 mg/L on fermentative hydrogen production was studied. The results showed that Cu²⁺ was able to enhance the hydrogen production yield with increasing Cu²⁺ concentration from 1.28 to 6.4 mg/L. The maximum hydrogen yield of 3.31 mol H₂/mol-Sucrose and the maximum hydrogen production rate of 14.44 L H₂/Day/L-Reactor were obtained at 6.4 mg/L Cu²⁺ and HRT 4 h Cu²⁺ at much higher concentration could inhibit the hydrogen production, but it could increase substrate degradation efficiency (12.8 and 25.6 mg/L Cu²⁺). The concentration of Cu²⁺ had effect on the distribution of soluble metabolite.     

Hydrogen production by mixed bacteria through dark and photo fermentation

Mixed bacteria were used to improve hydrogen yield from cassava starch in combination of dark and photo fermentation. In dark fermentation, mixed anaerobic bacteria (mainly Clostridium species) were used to produce hydrogen from cassava starch. Substrate concentration, fermentation temperature and pH were optimized as 10.4 g/l, 31 °C and 6.3 by response surface methodology (RSM). The maximum hydrogen yield and production rate in dark fermentation were 351 ml H₂/g starch (2.53 mol H₂/mol hexose) and 334.8 ml H₂/l/h, respectively. In photo fermentation, immobilized mixed photosynthetic bacteria (PSB, mainly Rhodopseudomonaspalustris species) were used to produce hydrogen from soluble metabolite products (SMP, mainly acetate and butyrate) of dark fermentation. The maximum hydrogen yield in photo fermentation was 489 ml H₂/g starch (3.54 mol H₂/mol hexose). The total hydrogen yield was significantly increased from 402 to 840 ml H₂/g starch (from 2.91 to 6.07 mol H₂/mol hexose) by mixed bacteria and cell immobilization in combination of dark and photo fermentation.     

Kinetics of cotton cellulose hydrolysis using concentrated acid and fermentative hydrogen production from hydrolysate

The kinetics of cotton cellulose hydrolysis using concentrated sulfuric acid and the performance of fermentative hydrogen production from the hydrolysate in the batch system was carried out in this study. Effects of sulfuric acid concentrations, cotton cellulose concentrations and operating temperatures on the cotton cellulose hydrolysis were investigated. It was found that cotton cellulose can dissolve completely in sulfuric acid concentration above 55% (by volume) at room temperature. The reduced sugar yields were varied from 64.3 to 73.9% (g R-sugar/g cotton cellulose) with the initial cotton cellulose concentrations of 30-70 g/L at a temperature of 40 °C.The reduced sugar concentrations and the initial pH of biohydrogen production were investigated at 37 °C. It was found that the optimal values of the hydrogen yield and substrate utilization were 0.95 mol H₂/mol R-sugar and 98% with an initial pH of 8.2, when substrate concentration was fixed at 20 g R-sugar/L. The maximum hydrogen yield was 0.99 mol H₂/mol R-sugar at a substrate concentration of 15 g R-sugar/L. Using the Gompertz Equation Model simulation, the maximum hydrogen production rate was 253 mL H₂/h/L at a substrate of 30 g/L and initial pH of 8.4.     

Characteristics of biohydrogen fermentation from various substrates

The characteristics of biohydrogen production from sucrose, slurry-type piggery waste and food waste under the effects of the reactor configurations and operational pHs (6 and 9) were examined by using heat-treated anaerobic sludge as a seed biomass. When sucrose was used in the batch test, the maximum hydrogen yield was 0.12–0.13 g COD (as H₂)/g COD (1.41–1.43 mol/mol hexose) at pH 6. In contrast, 0.10–0.11 g COD (as H₂)/g COD (1.12–1.21 mol/mol hexose) hydrogen yield was achieved from the reactor at pH 9. On the other hand, hydrogen production was not observed in the continuous sequencing batch mode fermenters fed with sucrose. Profile analysis at each cycle revealed hydrogen production at the initial operation periods but eventually only methane at 36 days. When slurry-type piggery waste was used as the substrate, the upflow elutriation-type fermenters produced methane but not hydrogen after 30 days operation. The fermentation intermediate profile showed that the hydrogen produced might have been consumed by homoacetogenic or propionate producing reactions, and eventually converted into methane by acetoclastic methanogens. The downflow leaching bed fermenters using food waste produced 0.013 L H₂/g volatile solids (VS) (0.0061 g COD (as H₂)/g COD) at pH 6 with 54% VS reduction whereas 0.0041 L H₂/g VS (0.0020 g COD (as H₂)/g COD) was produced at pH 9 with 86% VS reduction. The results show that the hydrogen produced should be released rapidly from the reactor before it can be consumed in other biochemical reactions, and substrates with high pH level (>9.0) can be used directly to produce hydrogen without needing to adjust the pH.     

Photofermentive production of biohydrogen from oil palm waste hydrolysate

Oil palm empty fruit bunch (OPEFB) was hydrolyzed with dilute sulfuric acid (6% v/v; 8 mL acid per g dry OPEFB) at 120 °C for 15-min to release the fermentable sugars. The hydrolysate contained xylose (23.51 g/L), acetic acid (2.44 g/L) and glucose (1.80 g/L) as the major carbon components. This hydrolysate was used as the sole carbon source for photofermentive production of hydrogen using a newly identified photosynthetic bacterium Rhodobacter sphaeroides S10. A Plackett–Burman experimental design was used to examine the influence of the following on hydrogen production: yeast extract concentration, molybdenum concentration, magnesium concentration, EDTA concentration and iron concentration. These factors influenced hydrogen production in the following decreasing order: yeast extract concentration > molybdenum concentration > magnesium concentration > EDTA concentration > iron concentration. Under the conditions used (35 °C, 14.6 W/m² illumination, initial pH of 7.0), the optimal composition of the culture medium was (per L): mixed carbon in OPEFB hydrolysate 3.87 g, K₂HPO₄ 0.9 g, KH₂PO₄ 0.6 g, CaCl₂⋅2H₂O 75 mg, l-glutamic acid 795.6 mg, FeSO₄⋅7H₂O 11 mg, Na₂MoO₂⋅2H₂O 1.45 mg, MgSO₄⋅7H₂O 2.46 g, EDTA 0.02 g, yeast extract 0.3 g). With this medium, the lag period of hydrogen production was 7.65 h, the volumetric production rate was 22.4 mL H₂/L medium per hour and the specific hydrogen production rate was 7.0 mL H₂/g (xylose + glucose + acetic acid) per hour during a 90 h batch culture of the bacterium. Under optimal conditions the conversion efficiency of the mixed carbon substrate to hydrogen was nearly 29%.     

Phytosynthesized iron oxide nanoparticles and ferrous iron on fermentative hydrogen production using Enterobacter cloacae: Evaluation and comparison of the effects

The effects of FeSO₄ and synthesized iron oxide nanoparticles (0–250 mg/L) on fermentative hydrogen production from glucose and sucrose, using Enterobacter cloacae were investigated, to find out the enhancement of efficiency. The maximum hydrogen yields of 1.7 ± 0.017 mol H₂/mol glucose and 5.19 ± 0.12 mol H₂/mol sucrose were obtained with 25 mg/L of ferrous iron supplementation. In comparison, the maximum hydrogen yields of 2.07 ± 0.07 mol H₂/mol glucose and 5.44 ± 0.27 mol H₂/mol sucrose were achieved with 125 mg/L and 200 mg/L of iron oxide nanoparticles, respectively. These results indicate that the enhancement of hydrogen production on the supplementation of iron oxide nanoparticles was found to be considerably higher than that of ferrous iron supplementation. The activity of E. cloacae in a glucose and sucrose fed systems was increased by the addition of iron oxide nanoparticles, but the metabolic pathway was not changed. The results revealed that the glucose and sucrose fed systems conformed to the acetate/butyrate fermentation type.     

Impact of regulated pH on proto scale hydrogen production from xylose by an alkaline tolerant novel bacterial strain, Enterobacter cloacae DT-1

A hydrogen producing facultative anaerobic alkaline tolerant novel bacterial strain was isolated from crude oil contaminated soil and identified as Enterobacter cloacae DT-1 based on 16S rRNA gene sequence analysis. DT-1 strain could utilize various carbon sources; glycerol, CMCellulose, glucose and xylose, which demonstrates that DT-1 has potential for hydrogen generation from renewable wastes. Batch fermentative studies were carried out for optimization of pH and Fe²⁺ concentration. DT-1 could generate hydrogen at wide range of pH (5–10) at 37 °C. Optimum pH was; 8, at which maximum hydrogen was obtained from glucose (32 mmol/L), when used as substrate in BSH medium containing 5 mg/L Fe²⁺ ion. Decrease in hydrogen partial pressure by lowering the total pressure in the fermenter head space, enhanced the hydrogen production performance of DT-1 from 32 mmol H₂/L to 42 mmol H₂/L from glucose and from 19 mmol H₂/L to 33 mmol H₂/L from xylose. Hydrogen yield efficiency (HY) of DT-1 from glucose and xylose was 1.4 mol H₂/mol glucose and 2.2 mol H₂/mol xylose, respectively. Scale up of batch fermentative hydrogen production in proto scale (20 L working volume) at regulated pH, enhanced the HY efficiency of DT-1 from 2.2 to 2.8 mol H₂/mol xylose (1.27 fold increase in HY from laboratory scale). 84% of maximum theoretical possible HY efficiency from xylose was achieved by DT-1. Acetate and ethanol were the major metabolites generated during hydrogen production.     

Feasibility of biohydrogen production from Gelidium amansii

The feasibility of hydrogen production from red algae was investigated. Galactose, the main sugar monomer of red algae, was readily converted to hydrogen by dark fermentation. The maximum hydrogen production rate and yield of galactose were 2.46 L H₂/g VSS/d and 2.03 mol H₂/mol galactose_added, respectively, which were higher than those for glucose (0.914 L H₂/g VSS/d and 1.48 mol H₂/mol galactose_added). The distribution of soluble byproducts showed that H₂ production was the main pathway of galactose uptake. 5-HMF, the main byproduct of acid hydrolysis of red algae causes noncompetitive inhibition of H₂ fermentation. 1.37 g/L of 5-HMF decreased hydrogen production rate by 50% compared to the control. When red algae was hydrolyzed at 150 °C for 15 min and detoxified by activated carbon, 53.5 mL of H₂ was produced from 1 g of dry algae with a hydrogen production rate of 0.518 L H₂/g VSS/d. Red algae, cultivable on vast tracts of sea by sunlight without any nitrogen-based fertilizer, could be a suitable substrate for biohydrogen production.     

Enhanced bio-hydrogen production from sugarcane juice by immobilized Clostridium butyricum on sugarcane bagasse

Immobilized Clostridium butyricum TISTR 1032 on sugarcane bagasse improved hydrogen production rate (HPR) approximately 1.2 times in comparison to free cells. The optimum conditions for hydrogen production by immobilized C. butyricum were initial pH 6.5 and initial sucrose concentration of 25 g COD/L. The maximum HPR and hydrogen yield (HY) of 3.11 L H₂/L substrate·d and 1.34 mol H₂/mol hexose consumed, respectively, were obtained. Results from repeated batch fermentation indicated that the highest HPR of 3.5 L H₂/L substrate·d and the highest HY of 1.52 mol H₂/mol hexose consumed were obtained at the medium replacement ratio of 75% and 50% respectively. The major soluble metabolites in both batch and repeated batch fermentation were butyric and acetic acids.     

Enhancing the performance of dark fermentative hydrogen production using a reduced pressure fermentation strategy

The partial pressure of hydrogen is an extremely important factor for hydrogen generation. This study investigated the effect of reduced pressure (via vacuum) on hydrogen production in a CSTR reactor. The results show that the reduced pressure condition is more effective in enhancing H₂ production at lower HRT (e.g., 8–4 h) than at higher HRT (e.g., 12 h). The optimal hydrogen yield and overall hydrogen production efficiency occurred at a HRT of 6 h with a value of 4.50 mol H₂/mol sucrose and 56.2%, respectively. Meanwhile, at HRT 6 h the hydrogen production rate was 0.937 mol/L/d. In addition, the HPR could be further improved to 1.196 mol/L/d when the HRT was shortened to 4 h, obtaining a 37–271% increase in HPR when compared with that described in the relevant reports. For all experiments, butyrate and acetate were the two primary soluble metabolites, accounting for 85–99% of total soluble microbial products. Predominant production of acetate and butyrate demonstrates the efficient H₂ fermentation with reduced pressure processes.     

Effect of substrate concentration on fermentative hydrogen production from sweet sorghum extract

The aim of the present study was to assess the influence of substrate concentration on the fermentative hydrogen production from sweet sorghum extract, in a continuous stirred tank bioreactor. The reactor was operated at a Hydraulic Retention Time (HRT) of 12 h and carbohydrate concentrations ranging from 9.89 to 20.99 g/L, in glucose equivalents. The maximum hydrogen production rate and yield were obtained at the concentration of 17.50 g carbohydrates/L and were 2.93 ± 0.09 L H₂/L reactor/d and 0.74 ± 0.02 mol H₂/mol glucose consumed, corresponding to 8.81 ± 0.02 L H₂/kg sweet sorghum, respectively. The main metabolic product at all steady states was butyric acid, while ethanol production was high at high substrate concentrations. The experiments showed that hydrogen productivity depends significantly on the initial carbohydrate concentration, which also influences the distribution of the metabolic products.     

Hydrogen production from sulfate- and ferrous-enriched wastewater

The quantitative relationship between sulfate reducing bacteria (SRB) and hydrogen (H₂) production from sulfate (SO₄²⁻) and ferrous [Fe(II)] enriched wastewater was investigated. Both Fe(II) (0–11,600 mg/L) and SO₄²⁻ (0–20,000 mg/L) improved the H₂ production efficiency from wastewater. The H₂ yields were increased up to 1.9 mol H₂/mol glucose in 580–1750 mg Fe(II)/L and 1000–3000 mg SO₄²⁻/L enriched wastewater at pH 5.8–6.2. Quantitative Fluorescence In Situ Hybridization (FISH) analyses revealed that the specific sulfate reducing activities (SSRA) were increased from 0.08 and 0.06 to 0.16 and 0.21 g TS/g SRB h in response to variations in sulfate concentration from 300–20,000 mg/L at pH 5.8 and 6.2, respectively. H₂ production was not influenced by low SSRA (≤0.1 g TS/g SRB h), which was independent of pH variation. The results demonstrated that the SSRA and Fe(II) concentration can significantly influence on the biological H₂ production from SO₄²⁻ and Fe(II) containing wastewater.     

Fermentative production of hydrogen and soluble metabolites from crude glycerol of biodiesel plant by the newly isolated thermotolerant Klebsiella pneumoniae TR17

A thermotolerant fermentative hydrogen-producing strain was isolated from crude glycerol contaminated soil and identified as Klebsiella pneumoniae on the basis of the 16S rRNA gene analysis as well as physiological and biochemical characteristics. The selected strain, designated as K. pneumoniae TR17, gave good hydrogen production from crude glycerol. Culture conditions influencing the hydrogen production were investigated. The strain produced hydrogen within a wide range of temperature (30–50 °C), initial pH (4.0–9.0) and crude glycerol concentration (20–100 g/L) with yeast extract as a favorable nitrogen source. In batch cultivation, the optimal conditions for hydrogen production were: cultivation temperature at 40 °C, initial pH at 8.0, 20 g/L crude glycerol and 2 g/L yeast extract. This resulted in the maximum cumulative hydrogen production of 27.7 mmol H₂/L and hydrogen yield of 0.25 mol H₂/mol glycerol. In addition, the main soluble metabolites were 1,3-propanediol, 2,3-butanediol and ethanol corresponding to the production of 3.52, 2.06 and 3.95 g/L, respectively.