Analysis of corrosion inhibition of Kleinhovia hospita plant extract aided by quantification of hydrogen evolution using a GLCM/SVM method

During a corrosion inhibition test, a combination of common electrochemical corrosion test methods with an in-situ quantification of H₂ evolution could provide a comprehensive analysis of the effectiveness of an organic inhibitor. This work analyzes the corrosion inhibition efficiency of Kleinhovia hospita plant extract on carbon steel specimens polarized in 1 M HCl, based on acquired H₂ bubbles images, by using gray level co-occurrence matrix (GLCM) and support vector machine (SVM) classification. A conformity was established between the classified-algorithm models and the corrosion test results obtained by potentiodynamic polarization test and electrochemical impedance spectroscopy. Hydrogen rate and corrosion rate show the same lowest trends at the addition of 3000 mg/L of KH extract. The inhibitor addition led to 99% of maximum inhibition efficiency. Based on the polarization data, KH extract is a mixed type inhibitor. Supported by Langmuir calculation for adsorption isotherm, a physisorption is stated as the main inhibition mechanism. The feature extraction using GLCM was able to distinguish changes in H₂ bubbles characteristics where the addition of inhibitor affected the corrosion rate. The GLCM/SVM method applied as a linear kernel function and showed 88% accuracy with d = 5 for image data testing. Remarkable changes in H₂ gas bubbles characteristic were observed in the specimen immersed in the solution with 3000 mg/L inhibitor addition, signified by 99% inhibition efficiency.     

Corrosion inhibition, hydrogen evolution and antibacterial properties of newly synthesized organic inhibitors on 316L stainless steel alloy in acid medium

Electrochemical corrosion behavior and hydrogen evolution reaction of 316L stainless steel has been investigated, in 0.5 M sulfuric acid solution containing four novel organic inhibitors as derivatives from one family, using potentiodynamic polarization, electrochemical impedance spectroscopy (EIS) measurements and surface examination via scanning electron microscope (SEM) technique. The effect of corrosion inhibitors on the hydrogen evolution reaction was related to the chemical composition, concentration and structure of the inhibitor. The inhibition efficiency, for active centers of the four used compounds, was found to increase in the order: -Cl < -Br < -CH₃ < -OCH₃. The corrosion rate and hydrogen evolution using the compound with methoxy group as a novel compound was found to increase with either increasing temperature or decreasing its concentration as observed by polarization technique and confirmed by EIS measurements. The compound with methoxy group (newly synthesized) has very good inhibition efficiency (IE) in 0.5 M sulfuric acid (98.3% for 1.0 mM concentration). EIS results were confirmed by surface examination. Also, antibacterial activity of these organic inhibitors was studied. The results showed that the highest inhibition efficiency was observed for the compound that posses the highest antibacterial activity.     

Influence of cerium (III) ions on corrosion and hydrogen evolution of carbon steel in acid solutions

This paper intended to investigate the influence of rare earth Ce(III) ions on the corrosion behavior of carbon steel in two acid solutions (0.5 M HCl and 0.25 M H₂SO₄) in order to control the rate of hydrogen evolution in those systems. Potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) tests were used for corrosion rate and electrochemical impedance evaluation. SEM was used to examine the sample surfaces immersed in acid solutions containing the optimal threshold Ce(III) concentration (0.1 mM). All results reveal that the corrosion resistance of carbon steel in HCl is superior to that in H₂SO₄ due to the higher rate of hydrogen production in the latter. A model for the corrosion process mechanism and inhibition by Ce(III) salt for carbon steel in the two tested media is proposed.     

Inhibition effect of natural polysaccharide composite on hydrogen evolution and P110 steel corrosion in 3.5 wt% NaCl solution saturated with CO2: Combination of experimental and surface analysis

For the analysis of corrosion and hydrogen production inhibition, we have synthesized Guar gum and methylmethacrylate (GG-MMA) composite. The synthesized composite was used as an eco-friendly corrosion inhibitor for P110 steel in 3.5% NaCl solution saturated with carbon dioxide at 50 °C. The primary corrosion techniques like weight loss, electrochemical impedance spectroscopy (EIS), and potentiodynamic polarization (PDP) was used to analyze the corrosion inhibition process. EIS study reveals the kinetically controlled corrosion inhibition process. The results of PDP proposed that GG-MMA composite is the cathodic type of inhibitor. The corrosion inhibition performance of GG-MMA alone is 90% at 400 mg/L, and that of formulation with KI (5 mM) + GG-MMA (300 mg/L) is 96.8%. The adsorption of GG-MMA over P110 steel is spontaneous and mixed type i.e., both physical and chemical. The conformation of GG-MMA molecule adsorption was done using a scanning electron microscope (SEM), Contact angle measurement, Atomic force microscopy (AFM), Scanning Electrochemical Microscopy (SECM) and X-ray photoelectron spectroscopy studies.