Performance of forward (direct) osmosis process: membrane structure and transport phenomenon

The performance of a forward (direct) osmosis (FO) process was investigated using a laboratory-scale unit to elucidate the effect of membrane structure and orientation on waterflux. Two types of RO membrane and a FO membrane were tested using ammonium bicarbonate, glucose, and fructose as the draw solution to extract water from a saline feed solution. The FO membrane was able to achieve higher water flux than the RO membranes under the same experimental conditions while maintaining high salt rejection of greater than 97%. Increasing operating temperature increased the water flux in FO process. To investigate the effect of membrane orientation on water flux, the FO membrane was tested normally (dense selective layer facing draw solution) and reversely (dense selective layer facing feed solution). Explanations on transport phenomenon in FO process were proposed which explain the observation that the FO membrane, when used in the normal orientation, performed better due to lesser internal concentration polarization. This study suggests that an ideal FO membrane should consist of a thin dense selective layer without any loose fabric support layer.     

Boric acid permeation in forward osmosis membrane processes: modeling, experiments, and implications

Forward osmosis (FO) is attracting increasing interest for its potential applications in desalination. In FO, permeation of contaminants from feed solution into draw solution through the semipermeable membrane can take place simultaneously with water diffusion. Understanding the contaminants transport through and rejection by FO membrane has significant technical implications in the way to separate clean water from the diluted draw solution. In this study, a model was developed to predict boron flux in FO operation. A strong agreement between modeling results and experimental data indicates that the model developed in this study can accurately predict the boron transport through FO membranes. Furthermore, the model can guide the fabrication of improved FO membranes with decreased boron permeability and structural parameter to minimize boron flux. Both theoretical model and experimental results demonstrated that when membrane active layer was facing draw solution, boron flux was substantially greater compared to the other membrane orientation due to more severe internal concentration polarization. In this investigation, for the first time, rejection of contaminants was defined in FO processes. This is critical to compare the membrane performance between different membranes and experimental conditions.     

Synthesis and characterization of novel forward osmosis membranes based on layer-by-layer assembly

Forward osmosis (FO) has received considerable interest for water- and energy-related applications in recent years. FO does not require an applied pressure and is believed to have a low fouling tendency. However, a major challenge in FO is the lack of high performance FO membranes. In the current work, novel nanofiltration (NF)-like FO membranes with good magnesium chloride retention were synthesized using layer-by-layer (LbL) assembly. The membrane substrate was tailored (high porosity, finger-like pores, thin cross-section, and high hydrophilicity) to achieve a small structural parameter of 0.5 mm. Increasing the number of polyelectrolyte layers improved the selectivity of the LbL membranes while reducing their water permeability. The more selective membrane 6#LbL (with 6 polyelectrolyte layers) had much lower reverse solute transport compared to 3#LbL and 1#LbL. Meanwhile, the FO water flux was found to be strongly affected by both membrane water permeability and solute reverse transport. Severe solute reverse transport was observed for the active-layer-facing-draw-solution membrane orientation, likely due to the suppression of Donnan exclusion as a result of the high ionic strength of the draw solution. In contrast, the active-layer-facing-feed-solution orientation showed remarkable FO performance (15, 20, and 28 L/m2.h at 0.1, 0.5, and 1.0 M MgCl?, respectively, for membrane 3#LbL using distilled water as feed solution), superior to other NF-like FO membranes reported in the literature. To the best of the knowledge of the authors, this is the first work on the synthesis and characterization of LbL based FO membranes.     

Integrating forward osmosis into microbial fuel cells for wastewater treatment, water extraction and bioelectricity generation

A novel osmotic microbial fuel cell (OsMFC) was developed by using a forward osmosis (FO) membrane as a separator. The performance of the OsMFC was examined with either NaCl solution or artificial seawater as a catholyte (draw solution). A conventional MFC with a cation exchange membrane was also operated in parallel for comparison. It was found that the OsMFC produced more electricity than the MFC in both batch operation (NaCl solution) and continuous operation (seawater), likely due to better proton transport with water flux through the FO membrane. Water flux from the anode into the cathode was clearly observed with the OsMFC but not in the MFC. The solute concentration of the catholyte affected both electricity generation and water flux. These results provide a proof of concept that an OsMFC can simultaneously accomplish wastewater treatment, water extraction (from the wastewater), and electricity generation. The potential applications of the OsMFC are proposed for either water reuse (linking to reverse osmosis for reconcentration of draw solution) or seawater desalination (connecting with microbial desalination cells for further wastewater treatment and desalination).     

正渗透膜污染的影响因素及清洗效果研究

为研究正渗透(FO)浓缩过程中的膜通量衰减规律,本文以牛血清白蛋白(BSA)为特征污染物,研究了正渗透过程中原料液的离子强度及BSA浓度、膜方位等参数不同时FO膜的污染规律,以提高膜通量和截留率为目标,对驱动液的种类、浓度,料液流速进行了优化,并优化了适宜的膜清洗方案.结果表明:原料液中离子强度越大,FO膜的初始通量越...     

Adverse impact of feed channel spacers on the performance of pressure retarded osmosis

This article analyzes the influence of feed channel spacers on the performance of pressure retarded osmosis (PRO). Unlike forward osmosis (FO), an important feature of PRO is the application of hydraulic pressure on the high salinity (draw solution) side to retard the permeating flow for energy conversion. We report the first observation of membrane deformation under the action of the high hydraulic pressure on the feed channel spacer and the resulting impact on membrane performance. Because of this observation, reverse osmosis and FO tests that are commonly used for measuring membrane transport properties (water and salt permeability coefficients, A and B, respectively) and the structural parameter (S) can no longer be considered appropriate for use in PRO analysis. To accurately predict the water flux as a function of applied hydraulic pressure difference and the resulting power density in PRO, we introduced a new experimental protocol that accounts for membrane deformation in a spacer-filled channel to determine the membrane properties (A, B, and S). PRO performance model predictions based on these determined A, B, and S values closely matched experimental data over a range of draw solution concentrations (0.5 to 2 M NaCl). We also showed that at high pressures feed spacers block the permeation of water through the membrane area in contact with the spacer, a phenomenon that we term the shadow effect, thereby reducing overall water flux. The implications of the results for power generation by PRO are evaluated and discussed.     

Thin-film composite pressure retarded osmosis membranes for sustainable power generation from salinity gradients

Pressure retarded osmosis has the potential to produce renewable energy from natural salinity gradients. This work presents the fabrication of thin-film composite membranes customized for high performance in pressure retarded osmosis. We also present the development of a theoretical model to predict the water flux in pressure retarded osmosis, from which we can predict the power density that can be achieved by a membrane. The model is the first to incorporate external concentration polarization, a performance limiting phenomenon that becomes significant for high-performance membranes. The fabricated membranes consist of a selective polyamide layer formed by interfacial polymerization on top of a polysulfone support layer made by phase separation. The highly porous support layer (structural parameter S = 349 μm), which minimizes internal concentration polarization, allows the transport properties of the active layer to be customized to enhance PRO performance. It is shown that a hand-cast membrane that balances permeability and selectivity (A = 5.81 L m(-2) h(-1) bar(-1), B = 0.88 L m(-2) h(-1)) is projected to achieve the highest potential peak power density of 10.0 W/m(2) for a river water feed solution and seawater draw solution. The outstanding performance of this membrane is attributed to the high water permeability of the active layer, coupled with a moderate salt permeability and the ability of the support layer to suppress the undesirable accumulation of leaked salt in the porous support. Membranes with greater selectivity (i.e., lower salt permeability, B = 0.16 L m(-2) h(-1)) suffered from a lower water permeability (A = 1.74 L m(-2) h(-1) bar(-1)) and would yield a lower peak power density of 6.1 W/m(2), while membranes with a higher permeability and lower selectivity (A = 7.55 L m(-2) h(-1) bar(-1), B = 5.45 L m(-2) h(-1)) performed poorly due to severe reverse salt permeation, resulting in a similar projected peak power density of 6.1 W/m(2).     

Comprehensive bench- and pilot-scale investigation of trace organic compounds rejection by forward osmosis

Forward osmosis (FO) is a membrane separation technology that has been studied in recent years for application in water treatment and desalination. It can best be utilized as an advanced pretreatment for desalination processes such as reverse osmosis (RO) and nanofiltration (NF) to protect the membranes from scaling and fouling. In the current study the rejection of trace organic compounds (TOrCs) such as pharmaceuticals, personal care products, plasticizers, and flame-retardants by FO and a hybrid FO-RO system was investigated at both the bench- and pilot-scales. More than 30 compounds were analyzed, of which 23 nonionic and ionic TOrCs were identified and quantified in the studied wastewater effluent. Results revealed that almost all TOrCs were highly rejected by the FO membrane at the pilot scale while rejection at the bench scale was generally lower. Membrane fouling, especially under field conditions when wastewater effluent is the FO feed solution, plays a substantial role in increasing the rejection of TOrCs in FO. The hybrid FO-RO process demonstrated that the dual barrier treatment of impaired water could lead to more than 99% rejection of almost all TOrCs that were identified in reclaimed water.     

Recovery and purification of potato proteins from potato starch wastewater by hollow fiber separation membrane integrated process

Potato starch wastewater contains high-concentration potato proteins which have great potential in the fields of food and health care. Most researches on potato protein recovery by membrane separation technique are focused on flat sheet or tubular ultrafiltration (UF) and reverse osmosis (RO) membranes and lack the further protein purification and the in-depth discussions on the fouling behavior. In this laboratory-scale study, potato proteins were recovered and purified from the simulated potato starch wastewater by the self-made hollow fiber (HF) UF and nanofiltration (NF) separation membrane integrated process. 85.62% potato proteins with high molecular weight in the potato starch wastewater could be retained by UF membrane and 92.1% potato proteins with low molecular weight were rejected by NF membrane. The concentrated solution after UF and NF filtration was desalinated and purified by diluting the solution eight times and filtering the diluted solution with UF membrane. Both types of HF membranes, UF and NF, suffered the inevitable membrane fouling. After the traditional physical washing and chemical cleaning, water flux of UF and NF membranes can be effectively recovered. The corresponding recovery rates of UF and NF membranes can reach 93.5% and 84.7%, respectively. The hollow fiber UF-NF separation membrane integrated process was proved to be a promising technique of high-purity potato protein recovery from potato starch wastewater.     

Experimental study of a 4040 spiral-wound forward-osmosis membrane module

This paper analyzes the structural features of a spiral-wound forward-osmosis (SW FO) membrane module via an experimental approach and presents the relationships between the water flux and operating conditions for design and operation of a large-scale FO process. The SW FO module has four ports: an inlet/outlet for the draw solution and an inlet/outlet for the feed solution. Accordingly, two strongly interacting flow streams existed on either side of the membrane with spatially variable properties. Unlike the operation of a membrane cell device loaded with a small membrane coupon, it was appropriate to operate a housing-type FO unit loaded with a 4040 SW FO module with a lower draw flow rate than feed flow rate. Because of the structural features of the SW FO module, the draw solution flowed inside of the membrane envelope under a considerable pressure in order to overcome the flow resistance. The effect of operating conditions on the water flux in a 4040 SW FO module was investigated. A water flux equation based on a temperature-correction factor (TCF) was proposed to predict the water flux at a given temperature. Our study is a good reference point for designing the FO process and FO membrane module.     

聚醚砜中空纤维膜的制备及其性能

聚醚砜（PES）中空纤维膜已被广泛使用在许多领域,如超滤,微滤,反渗透,液体/液体或液体/固体分离,气体分离,血液透析等。本文制备了聚醚砜中空纤维膜,并研究了膜的结构和性能。通过研究的成分和工艺条件对聚醚砜中空纤维膜的形态和性能的影响,从而掌握膜的结构和性能的关系。采用了浸入沉淀相转化法,通过改变聚合物溶液浓度,空气浴时间,凝固浴组成等参数来调节膜的性能。运用孔隙率、纯水通量和扫描电子显微镜（SEM）对膜的形态和性能进行表征。研究表明,膜的形态受到聚合物溶液浓度、凝固浴组成等工艺参数的较大影响,通过工艺条件的组合,制得具有良好的性能和理想结构的中空纤维膜。     

Removal of natural steroid hormones from wastewater using membrane contactor processes

Growing demands for potable water have strained water resources and increased interest in wastewater reclamation for potable reuse. This interest has brought increased attention to endocrine-disrupting chemicals (EDCs) as emerging water contaminants. The effect of EDCs, and in particular natural steroid hormones, on humans is of heightened interest in the study of wastewater reuse in advanced life support systems (e.g., space missions) because they are excreted in urine and have high endocrine-disrupting potencies. Direct contact membrane distillation (DCMD) and forward osmosis (FO) are being investigated for wastewater treatment in space. Retention of two natural steroid hormones, estrone and 17beta-estradiol, by these two processes was evaluated in the current investigation. DCMD provided greater than 99.5% hormone rejection; DCMD also provided constant flux, greater than 99.9% urea and ammonia rejection, and high water recovery. FO provided from 77 to 99% hormone rejection depending on experiment duration and feed solution chemistry.     

Interface treatment and performance study on fiber tube reinforced polyvinylidene fluoride hollow fiber membranes

Abstract

The fiber tube reinforced hollow fiber membranes are widely used in membrane bioreactor (MBR) due to their excellent mechanical and filtered properties. However, the poor adhesive power between fiber tubes and membranes restricted their service life in practice applications. Herein, we supply a facile and feasible surface coating modification methods for optimizing the interfacial bonding ability. The outer surfaces of the braided and knitted tubes were modified with silane coupling agent KH570 and acrylate adhesive before the fiber tube reinforced hollow fiber membranes were fabricated. The effects of different modifiers dosages on the morphology, tensile strength, bursting strength, pure water flux, porosity and mean pore size of the braided and knitted tubes reinforced hollow fiber membranes were evaluated respectively. Moreover, the effects of different modifiers on the fabric tubes with different structure were analysed. The results showed that the optimum dosage of the two modifiers was 3?g/5m. It is revealed that the minute quantities of modifiers applied to the tubes could improve not only the interfacial combination of the reinforced membrane, but also their strength and penetration performance.     

Hyperbranched polyethyleneimine induced cross-linking of polyamide-imide nanofiltration hollow fiber membranes for effective removal of ciprofloxacin

This study aims to develop a positively charged nanofiltration (NF) hollow fiber membrane for effective removal of ciprofloxacin from water. A novel NF membrane was fabricated by hyperbranched polyethyleneimine (PEI) induced cross-linking on a polyamide-imide hollow fiber support. The spongy-like, fully porous membrane support provides minimal transport resistance and sufficient mechanical strengths for water permeation under high pressures. It is found that the PEI modification significantly influences NF performance through the mechanisms of size exclusion, charge repulsion, and solute-membrane affinity. Specifically, after PEI induced cross-linking, the membrane pore size is significantly reduced. The membrane surface becomes more hydrophilic and positively charged. As a result of these synergic effects, the rejection of ciprofloxacin is substantially enhanced. Furthermore, experimental results show that the molecular weight of PEI has tremendous effect on NF performance of the as-modified membrane. The NF membrane modified by a high molecular weight PEI_60K exhibits the highest rejection, the lowest fouling tendency, and keeps a constant flux over the whole pH range. This study may have great potential for developing high-performance antifouling NF hollow fiber membranes for various industrial applications.     

高强度聚氯乙烯中空纤维膜的制备及其性能

针对溶液相转化法制备的聚氯乙烯(PVC)膜存在强度及通透性能难以同步提高的问题,以MT-I型复合粉为成孔剂,邻苯二甲酸二辛酯为稀释剂,采用螺杆挤出法制备了PVC中空纤维膜,研究了拉伸和萃取过程对纤维膜形貌及结构的影响,并通过水通量、碳素墨水截留率及拉伸强力测试分析了纤维膜的分离性能和力学性能。结果表明:随着拉伸倍数的增加,PVC中空纤维膜的断裂强度增大,断裂伸长率减小;经乙醇萃取后纤维膜表面出现了更多微孔,纤维膜的通透性能提高;当拉伸倍数为3时,纤维膜具有较高通透性和较好的力学性能,水通量为798 L/(m²·h),拉伸断裂强度为17.7 MPa,断裂伸长率为70.67%。     

冷却温度对聚偏氟乙烯/超高分子量聚乙烯共混中空纤维膜结构与性能的影响

针对聚偏氟乙烯(PVDF)膜强度与渗透性能难以同步提高的问题,以矿物油和邻苯二甲酸二丁酯为复合稀释剂,通过热致相分离法制备了PVDF/超高分子量聚乙烯(UHMWPE)共混中空纤维膜,探究不同冷却温度对膜形貌及孔结构的影响,并通过气通量、水通量及拉伸强力测试表征了中空纤维膜的渗透性能与力学性能。结果表明:原纤状UHMWPE增加了PVDF球晶聚集体的连接性;冷却温度对共混中空纤维膜的结构与性能影响显著;随着冷却温度的升高,PVDF/邻苯二甲酸二丁酯和UHMWPE/矿物油的相分离与结晶时间均延长,纤维膜的平均孔径和孔隙率增加,渗透性能改善,但大孔的出现和UHMWPE原纤数量的减少使纤维膜的力学性能下降。     

Forward osmosis concentration of high viscous polysaccharides of Dendrobium officinale: Process optimisation and membrane fouling analysis

Polysaccharides of Dendrobium officinale (DOP) need to be dehydrated and concentrated after extraction for further application. They are usually concentrated by thermal evaporation which consumes great energy. However, high viscosity of DOP makes the concentration more difficult even using non-thermal membrane technologies such as nanofiltration (NF) or reverse osmosis (RO). In this study, effects of process conditions, such as membrane orientations, draw solutions and their concentrations, and flowrate on forward osmosis (FO) concentration of viscous DOP were studied. Active layer to feed solution mode, cross flowrate at 240 mL min⁻¹, and draw solution of 3 m NaCl have been found as the optimal conditions. Foulants on the membrane surface with loose structure could be easily cleaned and removed by hydraulic flushing. DOP concentrated by FO achieved almost 1.3 times at the same time compared with that in NF and RO. DOP could be further concentrated for 1.5 folds at longtime without significant decrease in water flux. In addition, slight reverse solutes in FO process could reduce the viscosity of high viscous DOP, which was good for concentration. Accordingly, FO is a potential technology for concentration of high viscous polysaccharides such as DOP.     

Adsorption of the endocrine-active compound estrone on microfiltration hollow fiber membranes

Results of studies reported here show that adsorption could result in considerable accumulation of hormones on hydrophobic hollow fiber membrane surfaces during filtration of trace-hormone-containing feed solutions with a linear adsorption isotherm applicable over the majority of the estrone concentration range examined (2.6-154 ng/L). Models based on both diffusion and surface reaction limitation were used to describe the kinetics of estrone adsorption to the membranes tested. Results indicate that the rate of adsorption of estrone to the hollow fiber membranes was limited principally by surface reaction rate rather than the rate of diffusive transport to membrane surface sites. Both adsorption and desorption kinetics were satisfactorily described by pseudo-first-order expressions. These results are of environmental significance, especially in drinking water applications, where contaminants such as natural and synthetic hormones may accumulate on the membranes and desorb during backwashing and membrane cleaning.     

正渗透技术浓缩苹果汁过程中反向溶质扩散的研究

反向渗透扩散（RSF）是正渗透技术中的一大挑战,本实验立足于研究正渗透技术浓缩苹果汁性能以及功能性汲取液（乙酸钠、碳酸氢钠、柠檬酸钠溶液）的溶质扩散规律。首先,利用NaCl溶液为汲取液研究正渗透膜的基础特性,通过改变NaCl溶液浓度、进水流速以及膜操作模式,探究正渗透体系的水通量、反向溶质扩散及截留率,分析对去离子水和苹果汁的浓缩能力及溶质扩散规律;其次,对比不同功能性汲取液对苹果汁浓缩的效果和对RSF的影响,以期达到将RSF化弊为利的目的。结果表明,汲取液浓度和膜操作模式影响浓缩效率和RSF;采用压力延迟渗透（PRO）模式,苹果汁浓缩倍数和RSF均比正渗透（FO）模式高,PRO模式下,5 mol·L?1 NaCl汲取液RSF达87.34±6.32 g·m?2·h?1;不同种类功能性汲取液浓缩苹果汁的能力不同,汲水能力:碳酸氢钠>氯化钠>乙酸钠>柠檬酸钠。RSF:乙酸钠>碳酸氢钠>氯化钠>柠檬酸钠。2 mol·L?1柠檬酸钠汲取液的RSF为29.61±2.19 g·m?2·h?1,仅为同浓度NaCl汲取液的一半,与传统的NaCl汲取液相比,柠檬酸钠汲取液可有效控制RSF。     

Polyelectrolyte-promoted forward osmosis-membrane distillation (FO-MD) hybrid process for dye wastewater treatment

Polyelectrolytes have proven their advantages as draw solutes in forward osmosis process in terms of high water flux, minimum reverse flux, and ease of recovery. In this work, the concept of a polyelectrolyte-promoted forward osmosis-membrane distillation (FO-MD) hybrid system was demonstrated and applied to recycle the wastewater containing an acid dye. A poly(acrylic acid) sodium (PAA-Na) salt was used as the draw solute of the FO to dehydrate the wastewater, while the MD was employed to reconcentrate the PAA-Na draw solution. With the integration of these two processes, a continuous wastewater treatment process was established. To optimize the FO-MD hybrid process, the effects of PAA-Na concentration, experimental duration, and temperature were investigated. Almost a complete rejection of PAA-Na solute was observed by both FO and MD membranes. Under the conditions of 0.48 g mL(-1) PAA-Na and 66 °C, the wastewater was most efficiently dehydrated yet with a stabilized PAA-Na concentration around 0.48 g mL(-1). The practicality of PAA-Na-promoted FO-MD hybrid technology demonstrates not only its suitability in wastewater reclamation, but also its potential in other membrane-based separations, such as protein or pharmaceutical product enrichment. This study may provide the insights of exploring novel draw solutes and their applications in FO related processes.