Diffusion of radioactively tagged penetrants through random and block styrene–butadiene copolymers and filled cis-polybutadiene

The diffusion of radioactively tagged n-hexadecane in trace amounts has been studied in 22 random styrene–butadiene (SBR) copolymers with different styrene contents and butadiene microstructures; in several SBR block copolymers with different average block lengths (also diffusion of tagged 1,1-diphenyl ethane); in a triblock SBR copolymer cast from different solvents and also molded at elevated temperature; and in cis-polybutadiene filled to different extents with carbon black, calcium carbonate, and microglass spheres. The diffusion coefficient in random SBR copolymers decreased with increasing content of styrene and/or vinyl configuration and could be correlated with fractional free volume on the basis of linear additivity of the cis, trans, vinyl, and styrene moieties. In SBR block copolymers, the diffusion coefficient increased with increasing average block sequence length. For the triblock copolymer, the diffusion coefficient was approximately the same for samples molded or cast from solvents which are good for polybutadiene, but was far smaller for a sample cast from ethyl acetate, in which the polystyrene domains are probably lamellar. The effect of fillers on diffusion in cis-polybutadiene was compared with calculations on the basis of several theoretical models.     

Surface oxidation of styrene butadiene copolymers: Study by laser ablation and secondary ion mass spectrometry

The capabilities of ion bombardment and laser ablation coupled to mass spectrometry as independent techniques to investigate the surface thermooxidative stability of polystyrene, polybutadiene polymers, and styrene butadiene rubber (SBR) copolymers were investigated. Surface chemical modifications were detected according to the polymeric structure. The degradation products detected by static secondary ion mass spectrometry appeared at m/z 29, 43, and 55. Their compositions were related to the general formulae C_nH_mO⁺ with n = 1–3 and m = 1–3 for polybutadiene and styrene butadiene copolymers, whereas polystyrene was not affected by the aging treatment. The C_nH_mO⁺ ions result from butadiene unit degradation. The laser ablation ionization Fourier transform ion cyclotron resonance mass‐spectrometry results confirmed the detection of C_nH_mO⁺ ions. Finally, it may be considered that the surface thermooxidative process of SBR copolymers begins with butadiene unit degradation. The development of butadiene unit oxidation showed a dynamic oxidation phase, which coincided with a loss of unsaturation. The influence of the polymer conformation (blocked, branched, and random) on the surface oxidation for 30% styrene SBR compounds was also studied. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 87: 1910–1917, 2003     

Functionalization of a styrene/butadiene random copolymer by radical addition of l-cysteine derivatives

The functionalization of a styrene/butadiene (20/80) random copolymer (SBR) is performed by radical-mediated addition of l-cysteine derivatives to the macromolecules' double bonds. The reaction carried out in solution and in the melt leads to SBR chain bearing amino and carboxylate functionalities through thiol addition to the vinyl double bonds of the 1,2-butadiene units with anti-Markovnikov regioselectivity. The addition yield (up to 5 wt%) and the occurrence of the crosslinking side reaction are investigated with reference to feed conditions and process parameters. The optical rotation of the reaction products confirms the addition of l-cysteine to SBR chain and provides a simple route to prepare optically-active polymers containing pendant amino acid residues.     

Some effects of monomer sequence on the viscoelastic behavior of random copolymers of butadiene and styrene

The copolymerization of butadiene and styrene by lithium alkyls can be regulated to give either random or block copolymers. The block copolymers exhibit characteristic mechanical behavior which is attributable to their two-phase domain structure. In random copolymers free of long sequences of styrene there exists, nevertheless, the possibility of varying the sequence distribution by changing the manner in which composition varies along the polymer chain. Since copolymers of butadiene and styrene differing sufficiently in composition are likewise incompatible and will form multi-phase systems, it is likely that microheterogeneity can exist in certain “random” copolymers. Five copolymers of monomer ratio 70 : 30 butadiene/styrene, varying from a uniformly randomized sample, in which composition was very nearly independent of conversion, to a block polymer containing 22% block styrene chemical analysis, were prepared for the present investigation. Composition vs. conversion data indicated that all but the last polymer were free of long styrene sequences, with the composition distribution (along the chain) broadening systematically throughout the remainder of the series. The melt viscosity of the unvulcanized copolymers was distinctly affected by sequence distribution effects. Thus, the temperature coefficient of the apparent viscosity was independent of shear stress only for the uniformly randomized copolymer. In all others temperature superposition of the non-NEWTON ian flow curves was impossible, the discrepancies becoming larger the broader the composition distribution. The results can be explained qualitatively by association effects attributable to a domain structure similar to that found in block polymers. When these copolymers were cross-linked with dicumyl peroxide at 153 °C and the dynamic properties of the networks examined, no clear evidence of a domain structure was found except in the block polymer. Only the latter exhibited more than a single loss maximum. Temperature-frequency reduction of the dynamic measurements was successful with all but the block polymer. Whereas the parameters C₁ and C₂ in the WILLIAMS -LANDEL -FERRY equation appear to change systematically with the degree of randomness, there is evidence that this is attributable to a slight systematic drift toward higher vinyl unsaturation with increasing randomization of the monomer sequence. Relaxation spectra calculated for 25 °C were very nearly the same for all four random copolymers. When the polymers were cross-linked by gamma radiation at room temperature, the resulting networks did show properties indicative of a domain structure in the compositionally more heterogeneous copolymers. It is proposed that compatibility of chain segments of varying composition at the temperature of cross-linking leads to a suppression of the domain structure in the peroxide-cured rubbers, as segments of different composition are joined together. Independent evidence from stress-optical measurements supports this interpretation. The present investigation permits the conclusion that differences in sequence distribution of butadiene-styrene copolymers have, at best, only very minor effects on the visco-elastic properties of conventional vulcanizates, provided the polymers contain no long sequences of styrene units, i.e., polystyrene blocks detectable by classical methods. This is not true of the low shear melt viscosity, which senses relatively small differences in the composition and/or sequence distributions of the uncured rubbers.     

Synthesis and characterization of highly functionalized polymers based on N,N,N′,N′-tetraalkyl-4,4′-diaminostilbene and maleic anhydride

Novel, highly functionalized rod-like copolymers have been synthesized by alternating copolymerization of N,N,N′,N′-tetraalkyl-4,4′-diaminostilbenes (TDASs) with maleic anhydride. These unique copolymers have been characterized by SEC, DSC and TGA. The solubility of these copolymers in organic solvents is strongly dependent on the length of the alkyl chains on the amino groups and the solubility in aqueous media is pH dependent. Light scattering studies indicate that the conformation of the polymer backbone does not change upon increasing temperature or introducing charges to the amino groups. High chain rigidity is further corroborated by the high T_g of the polymers. There is no observed glass transition below 280 °C. The light scattering and thermal results are indicative of a rod-like backbone structure.     

Synthesis and structure of vinyl polymer-poly(α-amino acid) graft copolymers

N-(2-Carbobenzyloxyaminoethyl)acrylamide (CAEA) which is a vinyl compound carrying a protected aliphatic primary amino group in the side chain has been synthesized and its homopolymerization and copolymerization induced by radical initiators have been investigated. CAEA was found to possess good copolymerizability with vinyl monomers having large Q values such as styrene, 2-vinyl pyridine, acrylonitrile and methyl methacrylate. Vinyl polymers containing a small amount of aliphatic primary amino group in the side chain were produced by the treatment of vinyl polymers containing a small amount of CAEA unit with HBr/AcOH or $\text{H}{}_2\text{Pd}$. Using the former polymers as initiators for the polymerization of N-carboxyanhydrides of (RS)-Phe and (S)-Glu(OBz), vinly polymer (trunk)-poly-(α-amino acid) (branch) graft copolymers were synthesized. These copolymers were investigated by transmission electron microscopy, and the development of domain structure due to microphase separation was observed.     

Molecular weight distribution of polystyrene and of butadiene–styrene copolymers prepared in emulsion systems

Polystyrene and butadiene–styrene copolymers (SBR) were prepared in emulsion systems with a homologous series of commercial mercaptan modifiers. The molecular weight distribution (MWD) of the sets of polymers changed in a consistant manner when the regulating index of the mercaptan was relatively low. However the shape of the MWD curves appeared distorted in comparsion to theoretical curves when the modifier depleted rapidly and when divinylbenzene was present in the system. The divergence from the theoretical curve is attributed to a higher degree of branching in the high molecular weight fractions. Differences in MWD of SBR made with n- and tert- dodecyl mercaptans was marked. Notable differences were also found for SBR 1500 samples from the industry at random, but only slight differences were seen in a set of SBR 1503 samples. This study shows how the MWD of polymers prepared in emulsions can be varied simply by use of modifiers with different regulating indexes.     

Suface grafting of polymers onto nanodiamond by ligand-exchange reaction of ferrocene moieties of polymers with polycondensed aromatic rings of the surface

To improve the dispersibility of nanodiamond (ND) in solvents and polymer matrices, the grafting of copolymers containing vinyl ferrocene (Vf) onto the surface by a ligand-exchange reaction with ferrocene moieties of the copolymer and polycondensed aromatic rings of ND surface was investigated. The copolymer containing Vf was prepared by the radical copolymerization of Vf with vinyl monomers, such as methyl methacrylate (MMA), styrene (St), and N-isopropylacrylamide (NIPAM), using 2, 2′-azobisisobutyronitrile as an initiator. It was found that by heating of ND with poly(Vf-co-MMA), poly(Vf-co-St), and poly(Vf-co-NIPAN) in the presence of AlCl₃ and Al powder as catalysts, the corresponding copolymer was successfully grafted onto the surface. On the contrary, in the absence of AlCl₃, no grafting of these copolymers was observed. The grafting of polymers onto the ND surface was confirmed by FT-IR. These polymer-grafted NDs were found to give stable dispersions in solvents for the grafted polymer. In addition, the dispersibility of poly(Vf-co-NIPAM)-grafted ND uniformly dispersed in water below 32 °C but precipitated above the temperature. Therefore, it was concluded that the dispersibility of ND in water could be controlled by the temperature of water.     

Cut growth properties of styrene–butadiene copolymers

The cut growth properties of styrene–butadiene block and random copolymers are considered in terms of the tearing energy theory. It is found that the value of T₀ (the minimum value of tearing energy below which no cut growth takes place in the absence of chemical effects) is far higher for a styrene–butadiene resin copolymer system with a high amount of bound styrene resin than for a conventionally vulcanized SBR elastomer. Similarly, it is shown that the value of T₀ for a butadiene–styrene block copolymer (thermoplastic rubber) is considerably reduced when the material is crosslinked. It is proposed that the value of T₀ is influenced by the hystersial properties of the rubber.     

Reversible addition-fragmentation chain transfer polymerization of 7-(4-(acryloyloxy)butoxy)coumarin

The light sensitive vinyl monomer with coumarin unit, 7-(4-(acryloyloxy)butoxy)coumarin (7AC), was synthesized. The reversible addition-fragmentation chain transfer (RAFT) polymerization of 7AC, initiated by 2,2′-azobisisobutyronitrile (AIBN), was carried out using 2-cyanoprop-2-yl dithiobenzoate (CPDB) as a RAFT agent in N,N-dimethylformamide (DMF) solution. The kinetics exhibited first-order relationship with respect to the monomer concentration. The molecular weight of the polymer increased linearly with the monomer conversion. The chain extension of poly(7-(4-(acryloyloxy)butoxy)coumarin) (P7AC) using styrene (St) as the second monomer demonstrated that the obtained polymers were almost “living”. The fluorescence intensity of P7AC increased with the molecular weight of P7AC and was stronger than that of the monomer. The obtained polymer had strong ultraviolet (UV) absorption at 322 nm. The molecular weights of the polymer had no effect on its ultraviolet absorption intensity. The coumarin structure existing in P7AC underwent [2 + 2] cycloaddition reaction (photodimerization) under UV irradiation in tetrahydrofuran (THF) solution, which can be further used to prepare small particles from the single polymer.     

Modeling of batch production of high vinyl styrene/butadiene copolymers for high performance tires

Mathematical modeling of batch production of high vinyl random styrene/butadiene copolymers in an industrial batch reactor was accomplished. Mass and energy balance equations were solved to model the nonisothermal anionic copolymerization of styrene/butadiene performed in an industrial batch reactor. The simulation model allows to predict the variation of the individual and global monomer conversion(s), temperature, pressure, and volume level of reactor with the time. Simulation model was used to determine the optimal polymerization conditions to maximize the production of a high vinyl random styrene/butadiene copolymer used in the manufacture of high performance tires.     

The toughness and morphology of (chlorinated poly[vinyl chloride])/(methyl methacrylate‐butadiene‐styrene) blends

A series of methyl methacrylate‐butadiene‐styrene (MBS) graft copolymers were synthesized via seeded emulsion polymerization techniques by grafting styrene and methyl methacrylate on poly(butadiene‐co‐styrene) (SBR) particles. The chlorinated poly(vinyl chloride) (CPVC)/MBS blends were obtained by melting MBS graft copolymers with CPVC resin, and the effect of the core/shell ratio of MBS graft copolymer and SBR content of CPVC/MBS blends on the mechanical properties and morphology of CPVC/MBS blends was studied. The results showed that, with the increase in the core/shell ratio, the impact strength of the blend increased and then decreased. It was found that, when the core/shell ratio was 50/50, the impact strength was about 155 J/m, and the tensile strength evidently increased. The toughness of the CPVC/MBS blend was closely related to the SBR content of the blend, and with the increasing of SBR content of blend, the impact strength of the blend increased. The morphology of CPVC/MBS blends was observed via scanning electron microscopy. Scanning electron microscopy indicated that the toughness of CPVC/MBS blend was consistence with the dispersion of MBS graft copolymers in the CPVC matrix. J. VINYL ADDIT. TECHNOL., 22:501–505, 2016. © 2015 Society of Plastics Engineers     

Structural Effects on the Adhesive Properties of Butadiene/Styrene Radial Teleblock Copolymers

The effects of butadiene/styrene ratio, monomer distribution, and molecular weight distribution and branching on the pressure sensitive adhesive properties of butadiene/ styrene radial teleblock copolymers are reported. Styrene content of polymers with varying structures shows a close relation with tack response, and styrene content and structure affect solution viscosity and shear adhesion. When part of the styrene is incorporated into the polybutadiene segment to yield a block progressively enriched in styrene (tapered block), solution viscosity and shear adhesion are reduced. When the butadiene segment is replaced by a block of randomly copolymerized butadiene and styrene, the polymers provide lower solution viscosities and shear adhesion but unchanged tack.

The molecular weight distribution of the radial teleblock polymers can vary from broad, highly branched compositions to narrow molecular weight distributions of almost Iinear polymers. The latter have relatively high solution viscosity and low shear adhesion, whereas the former polymers produce moderate solution viscosity but high shear adhesion. Tack is generally unaffected.     

Irradiation of butadiene-styrene copolymers

Purified, gel free butadiene-styrene copolymers were prepared by emulsion polymerization with butadiene contents of 80, 55 and 30 weight %. Radiation behavior of these materials at 30°C was independent of dose rate in the range 0.04-0.46 Mrad/hour and the scission-crosslinking ratio was about 0.40 for all copolymers and was independent of total dose. Extrapolated sol fractions at infinite dose, intrinsic viscosities of irradiated polymers and M_n in the pre-gel region gave mutually consistent estimates of this ratio. G(crosslink) was 3.4. At the relatively low doses studied, intra-molecular crosslinking was evident only with the high styrene content polymer. Active sites for intermolecular crosslinking are thought to be allylic to chain double bonds, whereas vinyl groupings may be involved in intramolecular crosslinking.     

Oil absorbents based on styrene–butadiene rubber

Four oil absorbents based on styrene–butadiene (SBR)—pure SBR (PS), 4‐tert‐butylstyrene–SBR (PBS), EPDM–SBR network (PES), and 4‐tert‐butylstyrene‐EPDM‐SBR (PBES)—were produced from crosslinking polymerization of uncured styrene–butadiene rubber (SBR), 4‐tert‐butylstyrene (tBS), and ethylene–propylene–diene terpolymer (EPDM). The reaction took place in toluene using benzoyl peroxide (BPO) as an initiator. Uncured SBR was used as both a prepolymer and a crosslink agent in this work, and the crosslinked polymer was identified by IR spectroscopy. The oil absorbency of the crosslinked polymer was evaluated with ASTM method F726‐81. The order of maximum oil absorbency was PBES > PBS > PES > PS. The maximum values of oil absorbency of PBES and PBS were 74.0 and 69.5 g/g, respectively. Gel fractions and swelling kinetic constants, however, had opposite sequences. The swelling kinetic constant of PS evaluated by an experimental equation was 49.97 × 10^?2 h^?1. The gel strength parameter, S, the relaxation exponent, n, and the fractal dimension, d_f, of the crosslinked polymer at the pseudo‐critical gel state were determined from oscillatory shear measurements by a dynamic rheometer. The morphologies and light resistance properties of the crosslinked polymers were observed, respectively, with a scanning electron microscope (SEM) and a color difference meter.     

Properties of random and block copolymers of butadiene and styrene. I. Dynamic properties and glassy transition temperatures

The effect of monomer sequence on physical properties was investigated for butadienestyrene solution copolymers made by organolithium initiation. The polymers varied from random copolymers of uniform composition along the polymer chain to ideal block polymers of specific block sequence arrangement and included rubbers of intermediate degrees of randomness. Uniform composition random copolymers exhibit a single glass transition temperature and a very narrow dynamic loss peak corresponding to this transition. The glass transition can be predicted from the styrene content and the microstructure of the butadiene portion of the rubber. Random copolymers in which composition varies along the polymer chain, and to some extent between molecules, exhibit a single glass transition, but the dynamic loss peak is broadened. The extent of this broadening is shown to be compatible with the sequence distribution, polymer segments of various compositions losing mobility at different temperatures. This indicates a tendency for association between segments of different temperatures. This indicates a tendency for association between segments of different chains which are similar in composition. Block copolymers display two transitions, corresponding to T_g for each type of block. The position and width of the dynamic loss peaks are related to block length and compositional purity of the blocks.     

Mechanical properties and thermal aging behavior of styrene‐butadiene rubbers vulcanized using liquid diene polymers as the plasticizer

The mechanical properties of styrene‐butadiene rubber (SBR) vulcanizates prepared using various plasticizers including liquid polybutadiene and styrene‐butadiene copolymers were investigated. The effect of the liquid polymers as the plasticizers on the mechanical properties of the polymers, such as the hardness, tensile storage modulus, tanδ, and the modulus at 100% elongation values, were determined before and after the thermal aging. As a result, it was revealed that the use of these liquid polymers gave less amount of change in the measurement values for the mechanical properties during the aging. The crosslinking density and the amount of free polymers were also determined on the basis of the swelling and extraction data, respectively, using several organic solvents. These results support the fact that the added liquid polymers are fixed to the SBR networks. We revealed the superiority of the liquid styrene‐butadiene copolymers as the plasticizer, which provides sufficient mechanical properties after vulcanization and the excellent maintenance of the properties during the thermal aging process. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The preparation of some block copolymers

The reactivity of the double bonds in p-divinylbenzene toward anionic reagents is much greater than is the residual double bond in the divinylbenzene unit incorporated in a polymer chain. Thus it is possible to add to a “living” polymer a few divinylbenzene units before appreciable crosslinking occurs. Each of these units will have a vinyl group conjugated with a phenyl ring and will be comparable in reactivity to styrene. If the reaction is stopped at this point by the addition of methanol, the molecular weight of the product is essentially that of the original living polymer. These polymers may then be copolymerized through these active double bonds with any monomer with which styrene may be copolymerized, to form block or graft-like copolymers. The copolymerizations may be effected by any of the methods applicable to styrene, i.e., free radical, cationic, or anionic. Such copolymerizations have been attempted with methyl methacrylate, butyl acrylate, vinyl chloride, vinylidene chloride, vinyl acetate, butadiene, isobutene, and propene, usually successfully.     

Oxidation behavior of isoprene polymers and butadiene polymers

The oxidation behavior of cis-1,4-polyisoprene, emulsion polyisoprene, emulsion isoprene/styrene copolymers, and emulsion butadiene/styrene copolymers by heat aging or ultraviolet irradiation has been investigated from the change of gel fraction and molecular weight distribution. It was determined that the oxidation behavior of both isoprene and butadiene polymers is strongly dependent on the composition of the polymers as well as on the microstructure of the polymers. In the case of oxidation by heat aging, the probability ratio of chain scission to crosslinking of both isoprene and butadiene copolymers increases gradually with increasing styrene fraction. In the case of oxidation by ultraviolet irradiation, isoprene copolymers show a remarkable increase in the probability ratio of chain scission to crosslinking, whereas butadiene copolymers show substantially no change with increase in styrene fraction. It was also demonstrated that both isoprene and butadiene polymers show a greater tendency for crosslinking with oxidation by ultraviolet irradiation than with oxidation by heat aging.     

Composition of Butadiene-Styrene Copolymers by Gel Permeation Chromatography

Abstract

An ultraviolet detector was added to the GPC making it possible to determine both molecular weight distribution and composition of butadiene-styrene copolymers as a function of molecular weight. After calibration, several types of commercial and experimental copolymers were analyzed. SBR was found to have a very uniform composition over most of the range of molecular weight. However, the styrene content decreased at the high end of the distribution. Representative samples of anionically polymerized copolymers were also examined. In general, the composition of these polymers varied more than SBR. Usually, the styrene content was high at low molecular weight and decreased as molecular weight increased. Several experimental copolymers that were first metalated and then grafted with styrene were studied. Incomplete grafting as well as the presence of low molecular weight homopolystyrene was readily detected. This appears to be a particularly sensitive method for studying composition of copolymers.