Synthesis, characterization, and controllable drug release of dendritic star-block copolymer by ring-opening polymerization and atom transfer radical polymerization

A series of well-defined dendritic star-block copolymers were successfully synthesized by combination of living ring-opening polymerization (ROP) and atom transfer radical polymerization (ATRP) with the hydroxyl-terminated dendrimer polyester. Dendritic star-shaped poly(l-lactide)s (PLLAs) were prepared by bulk polymerization of l-lactide (l-LA) with dendrimer polyester initiator and tin 2-ethylhexanoate catalyst. The number-average molecular weight of these polymers linearly increased with the molar ratio of l-LA to dendrimer initiator. Dendritic star-shaped PLLA was converted into a PLLABr macroinitiator with 2-bromopropionyl bromide. Dendritic star-block copolymers could be obtained via ATRP of 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA). The molecular weight distributions of these copolymers were narrow. The molecular weights of dendritic star-shaped polymers and star-block copolymers could be controlled by the molar ratios of monomer to initiator and monomer conversion. The thermal properties of these dendritic star-shaped polymers and star-block copolymers were investigated. The behavior of model drug chlorambucil release from the copolymer indicated that the rate of drug release could be effectively controlled by altering the pH values of the environment.     

Crystallization of poly(l-lactide-dimethyl siloxane-l-lactide) triblock copolymers and its effect on morphology of microphase separation

This investigation characterizes the molten morphologies following isothermal crystallization of poly(l-lactide-block-dimethyl siloxane-block-l-lactide) triblock copolymers, which were synthesized by ring-opening polymerization of l-lactide using hydroxyl-telechelic PDMS as macroinitiators, via small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM). The break-out and preservation of the nanostructure of the triblock copolymer depended on the segregation strength, which was manipulated by varying the degree of polymerization. The crystallization kinetics of these semicrystalline copolymers and the effect of isothermal crystallization on their melting behaviors were also studied using DSC, FT-IR and WAXS. The exclusive presence of α-phase PLLA crystallite was verified by identifying the absence of the WAXS diffraction signal at 2θ = 24.5° and the presence of IR absorption at 1749 cm⁻¹ when the PLLA segment of the block copolymers was present as a minor component. The dependence of the crystallization rate (Rc) on the chemical composition of the triblock copolymers reveals that the Rc of the triblock copolymers was lower than that of PLLA homopolymer and the Rc were substantially reduced when the minor component of the crystallizable PLLA domains was dispersed in the PDMS matrix.     

Synthesis of ABA triblock copolymer of poly(potassium acrylate-styrene-potassium acrylate) by atom transfer radical polymerization and the self-assembly in selective solvents

A series of well-defined ABA triblock copolymers of poly(methyl acrylate)-polystyrene-poly(methyl acrylate) (PMA-b-PS-b-PMA) with different molecular weights were synthesized using Cl-PS-Cl as macroinitiator, CuCl/N,N,N′,N″,N″-pentamethyldiethylenetriamine (PMDETA) as catalyst system via atom transfer radical polymerization (ATRP). Amphiphilic triblock copolymer poly(potassium acrylate)-polystyrene-poly(potassium acrylate) (PKAA-b-PS-b-PKAA) was obtained by hydrolyzing PMA-b-PS-b-PMA. The self-assembly behavior of the triblock copolymers in organic solutions, which is a good solvent for the PS block and in aqueous solutions, which is a good solvent for the PKAA blocks was studied by high performance particle sizer (HPPS). The results showed that the Z-average size of the micelles obviously increases with increase in molecular weight of triblock copolymers, and the micelles in organic solutions are relatively more stable than in aqueous solutions. The effect of the length of PS block on the Z-average size of the micelles is more obvious in organic solution than in aqueous solution. The morphology of triblock copolymers PKAA-b-PS-b-PKAA in aqueous solution, which is a nearly ‘pearl-necklace’-like shape, was examined by transmission electron microscopy (TEM) at room temperature.     

Synthesis and characterization of poly(ethylene glycol)-b-poly (l-lactide)-b-poly(l-glutamic acid) triblock copolymer

A biodegradable amphiphilic triblock copolymer of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(l-glutamic acid) (PEG-b-PLLA-b-PLGA) was obtained by catalytic hydrogenation of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(γ-benzyl-l-glutamic acid) (PEG-b-PLLA-b-PBLGA) synthesized by the ring-opening polymerization (ROP) of N-carboxyanhydride of γ-benzyl-l-glutamate (BLG-NCA) with amino-terminated MPEG-b-PLLA-NH₂ as a macroinitiator. MPEG-b-PLLA-NH₂ converted from MPEG-b-PLLA-OH first reacted with tert-Butoxycarbonyl-l-phenylalanine (Phe-^NBOC) and dicyclohexylcarbodiimide (DCC) and then deprotected the tert-butoxycarbonyl group. MPEG-b-PLLA-OH was prepared by ROP of l-lactide with monomethoxy poly(ethylene glycol) in the presence of stannous octoate. The triblock copolymer and its diblock precursors were characterized by ¹H NMR, FTIR, GPC and DSA (drop shape analysis) measurements. The lengths of each block polymers could be tailored by molecular design and the ratios of feeding monomers. The triblock polymer PEG-b-PLLA-b-PLGA containing carboxyl groups showed obviously improved hydrophilic properties and could be a good potential candidate as a drug delivery carrier.     

Synthesis and characterization of pH/temperature-sensitive block copolymers via atom transfer radical polymerization

In order to prepare well-defined pH-sensitive block copolymers with a narrow molecular weight distribution (MWD), we synthesized a pH-sensitive block copolymer via atom transfer radical polymerization (ATRP) of sulfamethazine methacrylate monomer (SM) and amphiphilic diblock copolymers by the ring-opening polymerization of d,l-lactide/?-caprolactone (LA/CL), and their sol-gel phase transition was investigated. SM, which is a derivative of sulfonamide, was used as a pH responsive moiety, while PCLA-PEG-PCLA was used as a biodegradable, as well as a temperature sensitive one, amphiphilic triblock copolymer. The pentablock copolymer, OSM-PCLA-PEG-PCLA-OSM, was synthesized using Br-PCLA-PEG-PCLA-Br as an ATRP macroinitiator. The number average molecular weights of SM were controlled by adjusting the monomer/initiator feed ratio. The macroinitiator was synthesized by the coupling of 2-bromoisobutyryl bromide with PCLA-PEG-PCLA in the presence of triethyl amine catalyst in dichloromethane. The resultant block copolymer shows a narrow polydispersity. The block copolymer solution shows a sol-gel transition in response to a slight pH change in the range of 7.2-8.0. Gel permeation chromatography (GPC) and NMR were used for the characterization of the polymers that were synthesized.     

Biodegradable comb-dendritic tri-block copolymers consisting of poly(ethylene glycol) and poly(l-lactide): Synthesis, characterizations, and regulation of surface morphology and cell responses

A series of well-defined dumbbell-shaped tri-block copolymers consisting of comb-like poly(l-lactide) (PLLA) and linear poly(ethylene glycol) (PEG) with narrow molecular weight distributions and varied PLLA arm lengths have been synthesized via the sequential preparation of terminal dendronized polyhydric PEG and ring-opening polymerization (ROP) of l-lactide (LA). The terminal dendronized polyhydric PEG was prepared by the conjugation of amine-terminated fourth-generation polyester dendrons with NHS-activated PEG followed by the deprotection of acetonide groups. The length of PLLA arms can be readily controlled by the feed molar ratio of LA monomer to the hydroxyl groups in PEG macro-initiator. Differential scanning calorimetric (DSC) measurements and thermal gravimetric analysis (TGA) have been performed to indicate that the glass transition temperature (T_g), melting point (T_m), degree of crystallinity (χ_c), and onset decomposition temperature (T_d) of the copolymers are lower than those of the linear polylactide (LPLLA). Self-organized porous structures have been found in the copolymer films after solution casting and solvent evaporation. Honeycomb-like surface morphology could be achieved by adjusting the length of PLLA arms. Meanwhile, surface chemistry of the copolymer films such as surface hydrophobicity and the capability of adsorbing protein increase with the length of PLLA arms. Controllable material properties have been correlated with the in vitro cell responses. No cytotoxicity of the dumbbell-shaped copolymers has been found using rabbit bone marrow stromal cells (BMSCs). Human embryonic kidney (HEK) 293T cells have been used to reveal the effect of surface characteristics on cell attachment and proliferation. It has been found that cell proliferation has been enhanced significantly on the surfaces of the copolymers with longer PLLA arm lengths because of more favorable surface physicochemical properties.     

Synthesis of comb-shaped copolymers by combination of reversible addition-fragmentation chain transfer polymerization and cationic ring-opening polymerization

Comb-shaped graft copolymers with poly(methyl acrylate) as a handle were synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization and ring-opening polymerization (ROP) techniques in three steps. First, copolymers of poly(styrene-co-chloromethyl styrene), poly(St-co-CMS), were prepared by RAFT copolymerization of St and CMS using 1-(ethoxycarbonyl)prop-1-yl dithiobenzoate (EPDTB) as RAFT agent. Second, the polymerization of MA using poly(St-co-CMS)-SC(S)Ph as macromolecular chain transfer agent produced block copolymer poly(St-co-CMS)-b-PMA. Third, cationic ring-opening polymerization of THF was performed using poly(St-co-CMS)-b-PMA/AgClO₄ as initiating system to produce comb-shaped copolymers. The structures of the poly(St-co-CMS), poly(St-co-CMS)-b-PMA and final comb-shaped copolymers were characterized by ¹H NMR spectroscopy and gel permeation chromatography (GPC).     

A biodegradable triblock copolymer poly(ethylene glycol)-b-poly(l-lactide)-b-poly(l-lysine): Synthesis,self-assembly,and RGD peptide modification

A novel biodegradable triblock copolymer poly(ethylene glycol)-b-poly(l-lactide)-b-poly(l-lysine) (PEG–PLA–PLL) was synthesized by acidolysis of poly(ethylene glycol)-b-poly(l-lactide)-b-poly(ɛ-benzyloxycarbonyl-l-lysine) (PEG–PLA–PZLL) obtained by the ring-opening polymerization (ROP) of ɛ-benzyloxycarbonyl-l-lysine N-carboxyanhydride (ZLys NCA) with amino-terminated PEG–PLA–NH₂ as a macroinitiator, and the pendant amino groups of the lysine residues were modified with a peptide known to modulate cellular functions, Gly-Arg-Gly-Asp-Ser-Tyr (GRGDSY, abbreviated as RGD) in the presence of 1,1′-carbonyldiimidazole (CDI). The structures of PEG–PLA–PLL/RGD and its precursors were confirmed by ¹H NMR, FT-IR, amino acid analysis and XPS analysis. The cell adhesion and cell spread on the PEG–PLA–PLL/RGD film were enhanced compared to those on pure PLA film. Therefore, the novel RGD-grafted triblock copolymer is promising for cell or tissue engineering applications. Both copolymers PEG–PLA–PZLL and PEG–PLA–PLL showed an amphiphilic nature and could self-assemble into micelles of homogeneous spherical morphology. The micelles were determined by fluorescence technique, dynamic light scattering (DLS), and field emission scanning electron microscopy (ESEM) and could be expected to find application in drug and gene delivery systems.     

Optimization of the property profile of poly‐L‐lactide by synthesis of PLLA‐polystyrene–block copolymers

Diblock and triblock copolymers of poly‐L ‐lactide (PLLA) and polystyrene (PS) were synthesized and the mechanical properties of these copolymers studied. Free radical polymerization of styrene in the presence of 2‐mercaptoethanol as functional chain transfer agent produced mono‐functionalized PS‐blocks which were used as macroinitiators in the subsequent ring opening polymerization (ROP) of L ‐lactide to produce the diblock copolymers. Furthermore a α‐ω‐bishydroxyl functionalized PS‐block was synthesized by RAFT, which was then engaged as bifunctional initiator for the ROP of L ‐lactide to provide the triblock copolymers PLLA‐PS‐PLLA. Through the copolymerisation and high molar masses, it was possible to achieve an improved mechanical property profile, compared with pure PLLA, or the analogous blends of PLLA and PS. A weight fraction of PS of 10–30% was found to be the optimal range for improving the heat deflection temperature (HDT), as well as mechanical properties such as ultimate tensile strength or elongation at break. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Synthesis and self-assembly of a novel Y-shaped copolymer with a helical polypeptide arm

A novel biodegradable Y-shaped copolymer, poly(l-lactide)₂-b-poly(γ-benzyl-l-glutamic acid) (PLLA₂-b-PBLG), was synthesized by the ring-opening polymerization (ROP) of N-carboxyanhydride of γ-benzyl-l-glutamate (BLG-NCA) with centrally amino-functionalized poly(l-lactide), PLLA₂-NH₂, as a macroinitiator in a convenient way. The Y-shaped copolymer and its precursors were characterized by ¹H NMR, FT-IR, GPC, WAXD and DSC measurements. The self-assembly of the PLLA₂-b-PBLG copolymer in toluene and benzyl alcohol was examined. It was found that the self-assembly of the copolymer was dependent on solvent and on relative length of the PBLG block. For a copolymer with PLLA blocks of 26 in total degree of polymerization (DP), if the PBLG block was long enough (e.g., DP = 54 or more), the copolymer/toluene solution became a transparent gel at room temperature. In benzyl alcohol solution, only PLLA₂-b-PBLG containing ca. 190 BLG residues could form a gel; those with shorter PBLG blocks (e.g., DP = 54) became nano-scale fibrous aggregates and these aggregates were dispersed in benzyl alcohol homogeneously. Copolymers with short PBLG blocks behaved like a pure PLLA both in toluene and in benzyl alcohol. These experimental results were discussed and explained by virtue of the helical conformation of PBLG and the interactions between the solvents and the PLLA and/or PBLG segments.     

Preparation and characterization of PLLA/P(CL-b-LLA) blends by an in situ ring-opening polymerization

This paper describes a new reactive blending approach to improve the compatibility of poly(l-lactide) (PLLA) and poly(?-caprolacton) (PCL). For this purpose, the ring-opening polymerization of l-lactide (LLA) was carried out in the presence of PCL-OH (OH groups on one end). The P(CL-b-LLA) block copolymers were in situ formed during polymerization, and as a result, PLLA/P(CL-b-LLA) blends were obtained. The characterization of GPC and ¹H NMR verified the synthesis of PLLA/P(CL-b-LLA) blends. Furthermore, the ¹³C NMR spectroscopy showed that no transesterification reaction occurred to a significant extent during LLA polymerization process. The in situ formed P(CL-b-LLA) compatibilizes the phase separated structure of PCL domains in PLLA matrix. The size of PCL domains in PLLA matrix became much smaller than that in a solution blended sample. The average sizes of PCL domains are controllable in the level of sub-micron scale.     

可逆加成-断裂链转移聚合制备聚氯乙烯-b-聚乙二醇-b-聚氯乙烯共聚物

合成了含黄原酸酯端基的聚乙二醇（X-PEG-X）大分子链转移剂,并以其为可逆加成-断裂链转移试剂调控氯乙烯（VC）溶液和悬浮聚合,合成聚氯乙烯-b-聚乙二醇-b-聚氯乙烯（PVC-b-PEG-b-PVC）三嵌段共聚物。X-PEG-X调控VC溶液聚合得到的共聚物的分子量随聚合时间增加而增大,分子量分布指数小于1.65。X-PEG-X具有水/油两相分配和可显著降低水/油界面张力的特性,以X-PEG-X为链转移剂和分散剂,通过自稳定悬浮聚合也可合成PVC-b-PEG-b-PVC共聚物,共聚物颗粒无皮膜结构,分子量随聚合时间增加而增大;由于VC悬浮聚合具有聚合物富相和单体富相两相聚合特性,共聚物分子量分布指数略大于溶液聚合共聚物。通过乙酸乙烯酯（VAc）扩链反应进一步证实了PVC-b-PEG-b-PVC的“活性”,并合成PVAc-b-PVC-b-PEG-b-PVC-b-PVAc共聚物。水接触角测试表明PVC-b-PEG-b-PVC的亲水性优于PVC。     

The starch grafted poly(l-lactide) and the physical properties of its blending composites

A new method of the surface modified starch (SM-St) by grafting reaction of the hydroxyl groups on the starch with l-lactic acid was developed. A novel biodegradable starch grafted copolymer, starch-g-poly(l-lactide) (St-g-PLLA), was synthesized in situ by the ring-opening graft polymerization of a l-lactide (LLA) monomer onto the surface of the SM-St granules in the presence of Sn(Oct)₂ as a catalyst. The PLLA grafting efficiency could reach as high as 64 wt%. The structure of St-g-PLLA was characterized by IR, DSC and WAXD. The good adhesion between the two components had been evidenced by SEM observations. The medium-resistance of St-g-PLLA and the mechanical properties of the PLLA composite blending with St-g-PLLA were much better than that of the PLLA/starch blending composite.     

Synthesis of poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene triblock copolymers by two-step atom transfer radical polymerization

The synthesis of ABC triblock copolymer poly(ethylene oxide)-block-poly(methyl methacrylate)-block-polystyrene (PEO-b-PMMA-b-PS) via atom transfer radical polymerization (ATRP) is reported. First, a PEO-Br macroinitiator was synthesized by esterification of PEO with 2-bromoisobutyryl bromide, which was subsequently used in the preparation of halo-terminated poly(ethylene oxide)-block-poly(methyl methacrylate) (PEO-b-PMMA) diblock copolymers under ATRP conditions. Then PEO-b-PMMA-b-PS triblock copolymer was synthesized by ATRP of styrene using PEO-b-PMMA as a macroinitiator. The structures and molecular characteristics of the PEO-b-PMMA-b-PS triblock copolymers were studied by FT-IR, GPC and ¹H NMR.     

Nanostructured latex particles synthesized by nitroxide-mediated controlled/living free-radical polymerization in emulsion

Suspensions of diblock and triblock copolymer particles comprising a poly(n-butyl acrylate) first/central block and polystyrene or poly(methyl methacrylate) second/outer blocks were synthesized by nitroxide-mediated controlled/living free-radical emulsion polymerization. Monofunctional and difunctional alkoxyamines based on the nitroxide SG1 were used as initiators. For the sake of simplicity, sequential monomer additions were performed without any removal of unreacted monomer. Self-assembly of the obtained block copolymers was investigated both under the latex form as well as after different thermal treatments. AFM and TEM analyses revealed the occurrence of “onion-like” lamellar microphases directly inside latex particles for high enough copolymer molar masses and irrespective of molar mass distribution. This particular organization evolved towards more classical block copolymer morphologies upon solvent casting and/or thermal annealing of latex films.     

Synthesis and characterization of poly(ethylene glycol)-b-poly(l-histidine)-b-poly(l-lactide) with pH-sensitivity

In this paper, amphiphilic biodegradable methoxy-poly(ethylene glycol)-poly(l-histidine)-poly(l-lactide) (mPEG–PH–PLLA) triblock copolymers with pH sensitivity were synthesized. The properties of mPEG–PH–PLLA triblock copolymers were investigated by GPC, ¹H NMR, DSC, TGA, XRD and polarized optical microscopy. The results showed that the thermal properties of the triblock copolymers varied with the chain length of PH blocks. The glass transition temperatures (Tg) of the triblock copolymers increased with increasing poly(l-histidine) chain length. The morphologies of PLLA crystals changed from spherulite to dendritic crystal. Moreover, the crystallization rate of triblock copolymers was faster than that of PLLA homopolymer. The pH sensitivity of the self-assembled mPEG–PH–PLLA nanoparticles was investigated. The mean diameter and morphology of the nanoparticles were characterized by DLS, AFM and TEM. The results showed that the mean diameter of mPEG₄₅–PH₃₀–PLLA₈₂ nanoparticles in pH = 5.0 was smaller than that in pH = 7.4.     

Synthesis of poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate) triblock copolymer by atom transfer radical polymerization

The synthesis of triblock copolymer poly(octadecyl acrylate‐b‐styrene‐b‐octadecyl acrylate), using atom transfer radical polymerization (ATRP), is reported. The copolymers were prepared in two steps. First, polystyrene was synthesized by ATRP using α,α′‐dichloro‐p‐xylene/CuBr/bpy as the initiating system; Second, polystyrene was further used as macroinitiator for the ATRP of octadecyl acrylate to prepare ABA triblock copolymers in the presence of FeCl₂·4H₂O/PPh₃ in toluene. Polymers with controlled molecular weight (M_n = 17,000–23,400) and low polydispersity index value (1.33–1.44) were obtained. The relationship between molecular weight versus conversion showed a straight line. The effect of reaction temperature on polymerization was also investigated, showing a faster polymerization rate under higher temperature. The copolymers were characterized by FTIR, ¹H‐NMR, DSC, and GPC and the crystallization behavior of the copolymers was also studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1539–1545, 2004     

Synthesis of tetramethyl-p-silphenylenesiloxanedimethylsiloxane triblock copolymer by employing living anionic polymerization

Dimethylsiloxane-tetramethyl-p-silphenylenesiloxane-dimethylsiloxane (DMS-TMPS-DMS) triblock copolymer was synthesized by employing living anionic polymerization of hexamethylcyclotrisiloxane (D₃). Two synthetic methods were carried out for the polymerization. One of those methods was the anionic polymerization of D₃ initiated at the silanolate anion which was prepared from the terminal hydroxyl group of silanol-terminated TMPS prepolymer by reaction with n-butyllithium (method 1). The other was the coupling reaction of vinyl-terminated TMPS prepolymer with hydrosilyl-terminated DMS prepolymer obtained from the anionic polymerization of D₃ by using diphenylmethylsilanolate anion as initiator (method 2). In method 1, DMS contents of the copolymers ranged from 25.8 to 72.5 wt% and the values agreed with the ratio of D₃ to TMPS prepolymer. The weight-average molecular weights ranged from 1.36×10⁴ to 19.4×10⁴ and were close to the predicted values calculated from the $\text{M}\text{?}{}_{\mathrm{v}}$ of the TMPS prepolymer and the amount of D₃ added. In the case of method 2, weight-average molecular weights ranged from 19.5×10⁴ to 24.2×10⁴. The high molecular weight copolymer could thus be obtained by method 2. Intrinsic viscosity values of the triblock copolymers agreed with calculated values obtained by considering the copolymer as a binary mixture of these homopolymers. Differential scanning calorimetry and thermogravimetry were carried out on the triblock copolymers. The equilibrium melting temperatures of each of the copolymers were very close to that of poly-TMPS (160°C). The glass transition temperature and heat of fusion were decreased as the DMS content was increased. The thermogravimetric curves for the copolymers indicated that the thermal stability of the triblock copolymer was intermediate between the DMS and TMPS homopolymers.     

Synthesis of POSS-containing fluorosilicone block copolymers via RAFT polymerization for application as non-wetting coating materials

By using a polydimethylsiloxane (PDMS) macro-chain transfer agent with trithiocarbonate groups at both ends, fluorosilicone block copolymers containing polyhedral oligomeric silsesquioxane (POSS) were synthesized via reversible addition–fragmentation chain transfer (RAFT) polymerization. Acryloisobutyl POSS (APOSS) and 2,2,3,4,4,4-hexafluorobutyl acrylate (HFBA) were sequentially introduced into the copolymers. The obtained triblock copolymers PDMS-b-(PAPOSS)₂ exhibited a low polydispersity index (PDI) of less than 1.42 in the first 6 h of polymerization, but the PDI value became broader later because of the steric hindrance of the POSS macromer. The POSS-containing fluorosilicone pentablock copolymers with a PDI of about 2.0, which were prepared by the further RAFT polymerization of HFBA, showed clear microphase separation. The average roughness values of the copolymer films were enhanced by introducing POSS, and a certain POSS content led to a significant decrease of the receding contact angle. Measurements of water contact angles and ice shear strengths demonstrated that the non-wetting properties of the copolymer films were improved by the incorporation of both POSS and fluorine blocks. The block copolymers combine the advantages of POSS, PDMS and fluoropolymers, and can be potentially applied as non-wetting coating materials for anti-icing or anti-frosting.     

Nitroxide-mediated polymerization to form symmetrical ABA triblock copolymers from a bidirectional alkoxyamine initiator

Bidirectional alkoxyamine 2 was synthesized and used as the initiator in the polymerization of styrene (S), n-butyl acrylate (nBA), t-butyl acrylate (tBA), isoprene (I), and dimethylacrylamide (DMA). A variety of symmetrical ABA triblock copolymers were prepared, ranging in size from 5 to 59 kDa. Kinetics studies and gel permeation chromatography (GPC) confirmed the “living” nature of these polymerizations. Trifluoroacetic acid was used to convert the PtBA blocks of these polymers into poly(acrylic acid) (PAA) blocks, forming ABA amphiphilic triblock copolymers. AFM images of PAA-b-PnBA-b-PAA and PAA-b-PS-b-PAA triblock copolymers ionized by the addition of 2,2′-(ethylenedioxy)bis(ethylamine) show evidence of self-assembly.