All solid-state polymer electrolytes prepared from a hyper-branched graft polymer using atom transfer radical polymerization

We propose an all solid-state (liquid free) polymer electrolyte (SPE) prepared from a hyper-branched graft copolymer. The graft copolymer consisting of a poly(methyl methacrylate) main chain and poly(ethylene glycol) methyl ether methacrylate side chains was synthesized by atom transfer radical polymerization changing the average chain distance between side chains, side chain length and branched chain length of the proposed structure of the graft copolymer. The ionic conductivity of the SPEs increases with increasing the side chain length, branched chain length and/or average distance between the side chains. The ionic conductivity of the SPE prepared from POEM₉ whose POEM content = 51 wt% shows 2 × 10⁻⁵ S/cm at 30 °C. The tensile strength of the SPEs decreases with increases the side chain length, branched chain length and/or average distance between the side chains. These results indicate that a SPE prepared from the hyper-branched graft copolymer has potential to be applied to an all-solid polymer electrolyte.     

Interpretation of long-chain structure from dilute solution properties of ultrahigh molecular weight polymers

Summary Systematic studies on solution properties of ultrahigh molecular weight polymers showed the existence of some special features as compared to usual length polymers. The paper discusses the possible appearance of branched structures in the polymerization process, structures able to influence the mentioned features. From experimental data on poly(methyl methacrylate), poly(butyl methacrylate) and polyacrylonitrile it appears that branching can be excluded, and the very high molecular weight domain considered may be responsible for the modifications observed in the molecular weight dependences on 2>, A₂ or [].     

Synthesis and characterization of hyperbranched azobenzene-containing polymers via self-condensing atom transfer radical polymerization and copolymerization

We report on the synthesis of an azobenzene-containing inimer 6-{4-[4-(2-(2-bromoisobutyryloxy)hexyloxy)phenylazo]phenoxy}hexyl methacrylate (I) and used it to prepare hyperbranched homopolymer and copolymers by self-condensing vinyl polymerization (SCVP) and copolymerization (SCVCP) with its precursor 6-{4-[4-(6-hydroxyhexyloxy)phenylazo]phenoxy}hexyl methacrylate (M) using atom transfer radical polymerization (ATRP). Depending on the comonomer ratio, γ=[M]₀/[I]₀, branched polymethacrylates with number-average weights between 8000 and 20,000 and degree of branching (DB) between 0.08 and 0.49 were obtained by SCVCP, as evidenced by GPC and ¹H NMR analysis. In addition, the photochemical properties of the polymers were also studied by UV-vis spectra and found the structure of polymers affect obviously the trans-cis isomerization properties of the branched polymers.     

Synthesis and characterization of the environmental‐sensitive hyperbranched polymers as novel carriers for controlled drug release

Novel hyperbranched polymers, which contain a hydrophobic branched poly(p‐(chloromethy)styrene) (PCMS) core and poly(N,N‐dimethylaminoethyl methacrylate) (PDMA) shell that exhibited environmental sensitivity, have been synthesized by atom transfer radical polymerization (ATRP). At first, a hyperbranched polymer (PCMS) core is obtained via ATRP of p‐(chloromethy)styrene (CMS), which may act as an “inimer”‐monomer and initiator. Then the modified hyperbranched polymers having different average arm length consisting of PCMS and PDMA are synthesized by ATRP using anterior PCMS as macroinitiators. Their macromolecular structures are characterized by FTIR and ¹H NMR. Using chlorambucil as a model drug, the behaviors of the controlled drug release from the environmental‐sensitive hyperbranched polymers with different average chain length of PDMA and degree of branching are studied. The data demonstrate that the rate of the drug release can be effectively controlled by pH value, and these environmental‐sensitive hyperbranched polymers have the potential to be used as novel carriers in some controlled drug release systems in the future. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 311–316, 2006     

Synthesis of amphiphilic poly(methyl methacrylate)‐block‐poly(methacrylic acid) diblock copolymers by atom transfer radical polymerization

Atom transfer radical polymerization (ATRP) of 1‐(butoxy)ethyl methacrylate (BEMA) was carried out using CuBr/2,2′‐bipyridyl complex as catalyst and 2‐bromo‐2‐methyl‐propionic acid ester as initiator. The number average molecular weight of the obtained polymers increased with monomer conversion, and molecular weight distributions were unimodal throughout the reaction and shifted toward higher molecular weights. Using poly(methyl methacrylate) (PMMA) with a bromine atom at the chain end, which was prepared by ATRP, as the macro‐initiator, a diblock copolymer PMMA‐block‐poly [1‐(butoxy)ethyl methacrylate] (PMMA‐b‐PBEMA) has been synthesized by means of ATRP of BEMA. The amphiphilic diblock copolymer PMMA‐block‐poly(methacrylic acid) can be further obtained very easily by hydrolysis of PMMA‐b‐PBEMA under mild acidic conditions. The molecular weight and the structure of the above‐mentioned polymers were characterized with gel permeation chromatography, infrared spectroscopy and nuclear magnetic resonance. Copyright © 2005 Society of Chemical Industry     

Well-defined dibenzocyclooctyne end functionalized polymers from atom transfer radical polymerization

The dibenzocyclooctyne end functionalized agent 1 was designed as atom transfer radical polymerization (ATRP) initiator. The ATRP was then explored on three types of monomers widely used in free radical polymerization: methyl methacrylate, styrene, and acrylates (n-butyl acrylate and tert-butyl acrylate). The living polymerization behaviors were obtained for the methyl methacrylate and styrene monomers. The SPAAC click reactivity of dibenzocyclooctyne end group were demonstrated by successfully reacting with azide functionalized small chemical agents and polymers. Various topological polymers such as block and brush polymers were produced from strain-promoted azide-alkyne cycloaddition reaction (SPAAC) using the resultant dibenzocyclooctyne end functionalized poly(methyl methacrylate)/polystyrene as building blocks. For the acrylates, however, the polymerization did not hold the living characteristics with the dibenzocyclooctyne end functionalized ATRP initiator 1.     

Synthesis of poly(epichlorohydrin‐g‐methyl methacrylate) graft copolymers by the combination of cationic and atom transfer radical polymerization

Poly(epichlorohydrin) possessing chloromethyl side groups in the main chain was used in the atom transfer radical polymerization of methyl methacrylate and styrene to yield poly(epichlorohydrin‐g‐methyl methacrylate) and poly(epichlorohydrin‐g‐styrene graft copolymers. The polymers were characterized by ¹H NMR spectroscopy, gel permeation chromatography, differential scanning calorimetry, and fractional precipitation method. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2725–2729, 2006     

Molecular brushes with extreme grafted side chain densities

A series of densely grafted poly(n-butyl acrylate) (PBA) molecular brushes with four different grafting densities were synthesized by the “grafting-from” approach using atom transfer radical polymerization (ATRP). A novel monomer, isopropylidene-2,2-Bis(methoxy)propionic hydroxyethylmethacrylate (IMPHMA), was synthesized and copolymerized with methyl methacrylate (MMA) under different monomer feed ratios to yield a series of linear poly(methyl methacrylate-stat-IMAPA), [PMMA-s-(PIMPHMA)]. The resulting copolymers were deprotected and transformed to macroinitiators, [PMMA-s-(PHEMA-IMPHMA-Br)]. n-Butyl acrylate (BA) was grafted from these macroinitiators to yield a series of molecular brushes, [PMMA-s-{(PIMPHMA)-g-PBA}], with various side chain lengths. Molecular brushes were characterized by gel permeation chromatography (GPC) and ¹H NMR. PBA side chains were cleaved by acid hydrolysis, and the resulting linear PBA polymers were characterized by GPC to study initiation efficiency during the synthesis of molecular brushes. The initiation efficiency increased with polymerization time and decreased with macroinitiators that had more initiation sites. Atomic force microscopy (AFM) measurements demonstrated the characteristic molecular structure by resolving individual brush molecules.     

Synthesis,characterization, and thermal behavior study of methyl methacrylate polymers containing 4‐carbazole substitutes

A new polymerizable monomer, [4‐(9‐ethyl)carbazolyl]methyl methacrylate ( 2 ), was synthesized by reacting of methacrylic acid and 4‐hydroxymethyl‐9‐ethyl carbazole ( 1 ) by esterification procedure in the presence of N,N′‐dicyclohexylcarbodiimide. The resulting monomer was then polymerized free‐radically to form the poly(methyl methacrylate) containing 4‐(9‐ethyl)carbazolyl pend ent groups. Also, copolymerization of monomer 2 with various acrylic monomers such as methyl methacrylate, ethyl methacrylate, methyl acrylate, ethyl acrylate, and n‐butyl acrylate by azobisisobutyronitrile as a free radical polymerization initiator gave the related copolymers in high yields. The structure of all the resulted compounds was characterized and confirmed by FTIR and ¹H NMR spectroscopic techniques. The average molecular weight of the obtained polymers was determined by gel permeation chromatography using tetrahydrofurane as the solvent. The thermal gravimetric analysis and differential scanning calorimeter instruments were used for studying of thermal properties of polymers. It was found that, with the incorporation of bulky 4‐(9‐ethyl)carbazolyl substitutes in side chains of methyl methacrylate polymers, thermal stability and glass transition temperature of polymers are increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4989–4995, 2006     

Synthesis of Miktoarm Dumbbell-Like Amphiphilic Triblock Copolymer by Combination of Consecutive RAFT Polymerizations and ATRP

Summary  A novel synthetic route, combining three reversible addition-fragmentation chain transfer (RAFT) and one atom transfer radical polymerization (ATRP) processes, for the preparation of a miktoarm dumbbell-like amphiphilic triblock copolymer, poly(poly(ethylene glycol) methyl ether methacrylate)-b-polystyrene-b-(poly(4-vinylbenzyl chloride)-g-polystyrene) (PPEGMA-b-PS-b-(PVBC-g-PS)), was developed using 2-cyanoprop-2-yl 1-dithionaphthalate (CPDN) as a RAFT agent, and the benzyl chloride group of the VBC units in the PVBC block as active ATRP macroinitiators, respectively. The structures of the obtained (co)polymers were characterized by ¹H NMR spectroscopy. The obtained PPEGMA-b-PS-b-(PVBC-g-PS) amphiphilic triblock graft copolymer could self-assemble into spherical micelles with 100-300 nm diameters in a selective solvent.     

Stabilization of thermal degradation of poly(methyl methacrylate) by polysulfide polymers

The thermal degradation of poly(methyl methacrylate) (PMMA) in the presence of polysulfide polymers, namely, poly(styrene disulfide) (PSD) and poly(styrene tetrasulfide) (PST) was studied using thermogravimetry (TG) and direct pyrolysis-mass spectrometric (DP-MS) analysis. Both PSD and PST were found to stabilize the PMMA degradation, which was explained by both radical recombination and a chain-transfer mechanism. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 66: 2149–2156, 1997     

Novel fluorescent polynorbornenes with multi-functional armed structure by using highly stable block macroinitiators via a combination of living ring-opening metathesis polymerization and atom transfer radical polymerization

Novel organosoluble fluorescent polynorbornenes with multi-functional armed structure were designed and prepared by using highly stable block macroinitiators via a combination of living ring-opening metathesis polymerization (ROMP) and atom transfer radical polymerization (ATRP). A bromo-containing functional norbornene (NBMBr) was prepared from the Diels-Alder reaction of cyclopentadiene and allyl bromide. The diblock copolymer of 5-(N-carbazolyl methyl)bicycle[2.2.1]hept-2-ene (CbzNB) and NBMBr was successfully prepared using living ROMP and used as a novel macroinitiator [poly(CbzNB-b-NBMBr)] for ATRP. Carbazoyl-containing multi-functional armed copolymer with poly(methyl methacrylate) (PMMA) was prepared by using poly(CbzNB-b-NBMBr) as a macroinitiator for ATRP. Strong fluorescence emissions (370-450 nm) were observed in the low excimer-forming multi-functional armed fluorescent polynorbornenes. The fact is that low excimer-forming carbazole-containing polymeric compound would apparently be favorable in photoconductive materials. The multi-functional armed structure make this compound an attractive candidate for applications as multi-modified hole transport materials in molecular electronic devices. Multi-modification could be further considered to be carried out by using such a functional bromo group at the end of multi-arms.     

Core-shell polyacrylate and polystyrene-block-polyacrylate stars

The polymerization of p-(iodomethyl)styrene (PIMS) yields well-defined branched polymers with reactive iodomethyl groups. The branched poly[p-(iodomethyl)styrene] was used as the transfer agent in the iodine mediated radical polymerization of vinyl monomers. The polymerization proceeds in a controlled way and yields polystyrene and poly(t-butyl acrylate) star polymers with reactive groups at the end of their arms. Polymers so obtained were also used to prepare stars with block copolymer arms: polystyrene-block-poly(t-butyl acrylate). The characterization of star structures was performed by NMR and gel permeation chromatography with absolute molar mass detection (MALLS). Preliminary characterization of the thermal properties of these novel materials is reported.     

Synthesis of well‐defined dendritic hyperbranched polymers by iterative methodologies using living/controlled polymerizations

This review presents firstly the synthesis of various dendritic hyperbranched polymers with well‐defined structures by generation‐based growth methodologies using living/controlled polymerization. Secondly, the synthesis of dendritic hyperbranched poly(methyl methacrylate)s (PMMAs) and their functionalized block copolymers using a novel iterative methodology is described. The methodology involves a two‐reaction sequence in each iterative process: (a) a linking reaction of α‐functionalized living anionic PMMA with tert‐butyldimethylsilyloxymethylphenyl (SMP) groups with benzyl bromide (BnBr)‐chain‐end‐functionalized polymer and (b) a transformation reaction of the SMP groups into BnBr functions. This reaction sequence is repeated several times to construct high‐generation (maximum seventh generation) dendritic hyperbranched polymers. Similar branched architectural block copolymers have also been synthesized by the same iterative methodology using other α‐functionalized living anionic polymers. Surface structures of the resulting dendritic hyperbranched block copolymers composed of PMMA and poly(2‐(perfluorobutyl)ethyl methacrylate) segments have been characterized using X‐ray photoelectron spectroscopy and contact angle measurements. Solution behaviors of dendritic hyperbranched PMMAs with different generations and branch densities are discussed based on their intrinsic viscosities, g′ values and R_h values. Copyright © 2007 Society of Chemical Industry     

Melt flow and strength of branched styrene copolymers

In order to assess the dependence of strength properties of glassy polymers upon the extent of branching, copolymers of poly(styrene–acrylonitrile) were prepared. By using principally three methods: (a) hydroperoxide intermediates, (b) hydroxyl radical initiation, and (c) incorporation of transfer monomers, branched polymers with high levels of branching with comb and dendritic type structures were generated. The tensile strength was found to be strongly correlatable with melt flow, and, in general, the branched copolymers were found to have the same tensile strength as linear polymers of the same melt index.     

Synthesis and characterization of the novel inimer-containing fluorene units and preparation of blue light-emitting polymers

The novel inimer-containing fluorene units was successfully synthesized and characterized. Hyperbranched homopolymer and copolymers with methyl methacrylate (MMA) were prepared by the novel inimer via atom transfer radical polymerization where CuBr/1,1,4,7,10,10-hexamethyltriethylenetetramine (HMTETA) were used as catalyst. The copolymerization of inimer and MMA was performed under different ratio of the initial inimer/MMA and the inimer acted as not only the branched point (BP) but also the functional groups which emit blue light. The number-average molecular weight (M _n) and polydispersity index (PDI) of polymers are in the ranges (3.6–18.4) × 10³ and (1.3–2.8), respectively. Thermal gravimetric analysis (TGA) results showed all polymers had good thermal stabilities. The number of the inimers acted as branched point in the copolymer backbone is estimated by ¹H NMR spectra and UV–Vis absorption spectra.     

Polyisobutylene-based miktoarm star polymers via a combination of carbocationic and atom transfer radical polymerizations

Poly(isobutylene-b-styrene) (PIB-PS) copolymers and polyisobutylene (PIB) homopolymers were synthesized via quasiliving carbocationic polymerization from the initiator 3,3,5-trimethyl-5-chlorohexyl acetate, which contains a protected hydroxyl group. The PIB block was created at −70 °C in a methylcyclohexane/methyl chloride (60:40) cosolvent system, using TiCl₄ as co-initiator, followed optionally by sequential addition of styrene. Using a strong base, the acetate head group of the resulting block copolymer was cleaved to yield a hydroxyl group, which was subsequently esterified with the branching agent 2,2-bis((2-bromo-2-methyl)propionatomethyl)propionyl chloride (BPPC) to create dual initiating sites for atom transfer radical polymerization (ATRP). ATRP of tert-butyl acrylate was carried out using a Cu(I)Br/1,1,4,7,7-pentamethyldiethylenetriamine (PMDETA) catalyst system. In some cases, the ester side chains of the poly(tert-butyl acrylate) (PtBA) blocks were cleaved to create poly(acrylic acid) (PAA) blocks. The final miktoarm star polymers had compositions that were very close to theoretical.     

Partial draining of low-molecular weight polymers with flexible chains

The results of the theory of intrinsic viscosity based on the model of a worm-like chain have been used in analyses of the [η]-M correlation under theta conditions, and of the Stockmayer—Fixman plot for polymers with flexible chains at molecular weights M < 10⁵. Their viscosity behaviour appears to be influenced by the chain thickness d. An analysis of the available data allowed us to obtain reasonable d values for several polymers: polyethylene; poly(ethylene oxide); polystyrene; poly(methyl methacrylate), and poly(vinyl acetate). The effect of solvent on d was ascertained. The analysis shows that the reliability of the results obtained by the Stockmayer—Fixman method is the higher, the larger the proportion of data used which reside in the region M > 10⁵.     

Synthesis of linear tetrablock quaterpolymers via atom transfer radical polymerization and a click coupling approach

We report the synthesis of a well-defined linear tetrablock quaterpolymer of poly(butyl acrylate)-b-polystyrene-b-poly(methyl acrylate)-b-poly(methyl methacrylate) by combining atom transfer radical polymerization (ATRP) and a click coupling approach. For this purpose, polystyrene-b-poly(butyl acrylate) (AB) was prepared by ATRP using macroinitiator as α-trimethylsilyl(TMS)-alkyne ω-bromo polystyrene. The α-(TMS) end of the AB diblock copolymer was deprotected using tetrabutylammonium fluoride (TBAF) in THF. The ω-azide end of the CD diblock copolymer was made from poly(methyl methacrylate)-b-poly(methyl acrylate) (CD) via transformation of the bromine chain end by a simple nucleophilic substitution reaction with NaN₃ in DMF. Click coupling between the ω-azide end in CD diblock copolymer with the α-alkyne end in the AB diblock copolymer was then performed by Cu¹-catalyzed (3+2) cycloaddition. Gel permeation chromatography (GPC), FT-IR and ¹H NMR spectroscopy confirmed the successful formation of a linear ABCD tetrablock copolymer via ATRP and click coupling.     

Pentacoordinated iron(II) complexes with 2,6-bis[(imino)ethyl]pyridine-Schiff base ligands as new catalyst systems mediated atom transfer radical polymerization of (meth)acrylate monomers

2,6-bis[1-(cis)-myrtanylimino)ethyl]pyridineiron(II) chloride (2) and 2,6-bis[(1-phenylimino)ethyl]pyridineiron(II) chloride (3) were investigated as novel complexes for iron-mediated atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) and tert-butyl acrylate (tBA) using toluene as the solvent, and ethyl 2-bromoisobutyrate as the initiator. A catalyst/initiator molar ratio as low as 0.1/1 was used in order to reduce catalyst contamination to the polymers. Both complexes produced PMMA and PtBA polymers with controlled structures and very low molecular weight distributions as low as 1.07, in particular for complex 3. High to moderate conversions (30–45%) were obtained in 20 h, although very diluted amount of catalyst was used and in the absence of any reducing agent which indicates an efficient catalyst system. The resulting polymers were characterized by NMR, GPC, and DSC. Syndio-rich atactic poly(t-BA) and poly(MMA) with relatively high [rr] diads (50%, 42%, respectively) were isolated.