Oxygen Position, Octahedral Distortion, and Bond-Valence Parameter from Bond Lengths in Ti1−xSnxO2 (0 ≤x≤ 1)

Based on the virtual crystal approximation (or Vegard's law), the bond lengths of Ti_{1− x} Sn _x O₂ were deduced from those of TiO₂ and SnO₂, to allow the oxygen position and octahedral distortion to be determined as a function of x . The oxygen positional parameter ( u ) increased linearly when the Sn⁴⁺ cation (which has a larger ionic radius) was substituted for the Ti⁴⁺ cation, whereas the octahedral distortion exhibited a nonlinear decay with increasing x in Ti_{1− x} Sn _x O₂. At the same time, the bond-valence parameter, which relates bond valence to bond length, so that the central atom in the octahedron can retain a constant valence of +4.0, exhibited a correlation with u for Ti_{1− x} Sn _x O₂. The present results indicate that the different phonon/physical properties of TiO₂ and SnO₂ and/or their dependence on x in Ti_{1− x} Sn _x O₂ can be associated with different octahedral distortions.     

Computer Simulation of Kinetics of Spinodal Decomposition in the Tetragonal TiO2–SnO2 System

Computer simulation was carried out for the kinetics of spinodal decomposition in the tetragonal TiO₂–SnO₂ system on the basis of a nonlinear diffusion equation. A time evolution of the microstructure and the effect of coherent strain on the separated two phases were investigated by Langer's approximate method and the finite difference method. It was shown that the composition fluctuations develop in the first stage of the spinodal decomposition, and the formation of interface and the grain growth appear in the second stage. The local stress field and the local strain field with the coherence of the lattice were calculated. Subsequently the appearance of the interface dislocations in the (100) and (010) planes was demonstrated to occur in the third stage. Physical interpretation was given to the experimental observations for the tetragonal TiO₂–SnO₂ system on the basis of those calculations.     

Solid-State Diffusive Amorphization in TiO2/ZrO2 Bilayers

Thin films of crystalline TiO₂ were deposited on self-assembled organic monolayers from aqueous TiCl₄ solutions at 80°C; partially crystalline ZrO₂ films were deposited on top of the TiO₂ layers from Zr(SO₄)₂ solutions at 70°C. In the absence of a ZrO₂ film, the TiO₂ films had the anatase structure and underwent grain coarsening on annealing at temperatures up to 800°C; in the absence of a TiO₂ film, the ZrO₂ films crystallized to the tetragonal polymorph at 500°C. However, the TiO₂ and ZrO₂ bilayers underwent solid-state diffusive amorphization at 500°C, and ZrTiO₄ crystallization could be observed only at temperatures of 550°C or higher. This result implies that metastable amorphous ZrTiO₄ is energetically favorable compared to two-phase mixtures of crystalline TiO₂ and ZrO₂, but that crystallization of ZrTiO₄ involves a high activation barrier.     

A Study of the Phase Relations of ZrO2–TiO2 and ZrO2–TiO2–SiO2

The phase relations of the systems ZrO₂–TiO₂ and ZrO₂–TiO₂–SiO₂ were investigated. X-ray diffraction techniques served as the principal means of analysis. The binary system ZrO₂–TiO₂ was found to be one of partial solid solutions with no intermediate compounds. A eutectic point was found to exist at 50 to 55 weight % ZrO₂ and 1600°C. A preliminary investigation of the ternary system ZrO₂–TiO₂–SiO₂, although not extensive, resulted in a better understanding of this system, with a fairly accurate location of some of its boundary lines. A eutectic point was located at 2% ZrO₂, 10% TiO₂, and 88% SiO₂ at approximately 1500°C.     

Mechanism of ZrTiO4 Synthesis by Mechanochemical Processing of TiO2 and ZrO2

High-energy ball milling initiates a solid-state reaction in an equimolar mixture of TiO₂ and ZrO₂. The first stage of ball milling induced the transformation of anatase TiO₂ to high-pressure phase TiO₂ (II), isostructural with ZrTiO₄. The formation of solid solutions monoclinic ZrO₂/TiO₂ and TiO₂ (II)/ZrO₂ was observed in the intermediate stage. Afterward, a nanosized ZrTiO₄ phase was formed in the milled product from the TiO₂ (II)/ZrO₂ solid solution. The sintering of the milled product at a temperature <1100°C was examined in situ by Raman spectroscopy. The full solid-state reaction toward ZrTiO₄ ceramic is completed at a temperature considerably lower than reported in the literature.     

Sol–Gel Route to Synthesis of Microporous Ceramic Membranes: Thermal Stability of TiO2–ZrO2Mixed Oxides

In this paper concerning the synthesis of microporous ceramic membranes, we focus on the preparation and ther- mal stability of unsupported microporous TiO₂-ZrO₂, mixed-oxide membranes. It has been observed that, by add- ing up to 20% ZrO₂, into TiO₂, or up to 10% TiO₂, into ZrO₂, these microporous membranes display improved thermal stability. They can be fired up to 500°C for 0.5 h without closing micropores. However, membranes containing almost equal percentages of each component have lost microporous features and have low surface areas and low porosities. A phase diagram of a two-component TiO₂- ZrO₂, mixed-oxide membrane has been prepared based on DTA and X-ray diffraction data in order to better under- stand the microstructure changes upon firing.     

Immiscibility Area in the System TiO2–ZrO2–SiO2

A furnace for use in conjunction with the X-ray spectrometer was developed which was capable of heating small powdered specimens in air to temperatures as high as 1850°C. This furnace was also used for the heating and quenching of specimens in air from temperatures as high as 1850°C. An area of two liquids coexisting between 20 and 93 weight % TiO₂ above 1765°± 10°C. was found to exist in the system TiO₂–SiO₂, which is in substantial agreement with the previous work of other investigators. The area of immiscibility in the system TiO₂–SiO₂ was found to extend well into the system TiO₂–ZrO₂–SiO₂. The two liquids were found to coexist over a major portion of the TiO₂ (rutile) primary-phase area with TiO₂ (rutile) being the primary crystal beneath both liquids. The temperature of two-liquid formation in the ternary was found to fall about 80°C. with the first additions of ZrO₂ up to 3%. With larger amounts of ZrO₂ the change in the temperature of the boundary of the two-liquid area was so slight as to be within the limits of error of the temperature measurement. Primary-phase fields for TiO₂ (rutile), tetragonal ZrO₂, and ZrTiO₄ were found to exist in the system TiO₂–ZrO₂–SiO₂. SiO₂ as high cristobalite is known to exist in the system TiO₂–ZrO₂–SiO₂.     

Sol–Gel Synthesis and Characterization of Ag and Au Nanoparticles in SiO2, TiO2, and ZrO2 Thin Films

Silver and gold nanoparticles were synthesized by the sol–gel process in SiO₂, TiO₂, and ZrO₂ thin films. A versatile method, based on the use of coordination chemistry, is presented for stabilizing Ag⁺ and Au³⁺ ions in sol–gel systems. Various ligands of the metal ions were tested, and for each system it was possible to find a suitable ligand capable of stabilizing the metal ions and preventing gold precipitation onto the film surface. Thin films were prepared by spin-coating onto glass or fused silica substrates and then heat-treated at various temperatures in air or H₂ atmosphere for nucleating the metal nanoparticles. The Ag particle size was about 10 nm after heating the SiO₂ film at 600°C and the TiO₂ and ZrO₂ films at 500°C. After heat treatment at 500°C, the Au particle size was 13 and 17 nm in the TiO₂ and ZrO₂ films, respectively. The films were characterized by UV–vis optical absorption spectroscopy and X-ray diffraction, for studying the nucleation and the growth of the metal nanoparticles. The results are discussed with regard to the embedding matrix, the temperature, and the atmosphere of the heat treatment, and it is concluded that crystallization of TiO₂ and ZrO₂ films may hinder the growth of Ag and Au particles.     

Preparation of Necklace-Structured TiO2/SnO2 Hybrid Nanofibers and Their Photocatalytic Activity

TiO₂/SnO₂ nanonecklace-structured hybrid nanofibers have been prepared via an electrospinning method. These hybrid nanofibers are characterized with SnO₂-rich beads and pure TiO₂ chains. It is found that TiO₂ in the beads shows a rutile structure, and the one in the chains is entirely composed of anatase phase. This novel microstructure enhanced the photocatalytic activity, as well as its ideal recyclable character. We believe that this fire-new type of nanofiber may potentially serve as a new generation photocatalyst in environmental remediation.     

Anatase-Type TiO2 and ZrO2-Doped TiO2 Directly Formed from Titanium(III) Sulfate Solution by Thermal Hydrolysis: Effect of the Presence of Ammonium Peroxodisulfate on their Formation and Properties

Anatase-type TiO₂ powder containing sulfur with absorption in the visible region was directly formed as particles with crystallite in the range 15–88 nm by thermal hydrolysis of titanium(III) sulfate (Ti₂(SO₄)₃) solution at 100°–240°C. Because of the presence of ammonium peroxodisulfate ((NH₄)₂S₂O₈), the yield of anatase-type TiO₂ from Ti₂(SO₄)₃ solution was accelerated, and anatase with fine crystallite was formed. Anatase-type TiO₂ doped with ZrO₂ up to 9.8 mol% was directly precipitated as nanometer-sized particles from the acidic precursor solutions of Ti₂(SO₄)₃ and zirconium sulfate in the presence and the absence of (NH₄)₂S₂O₈ by simultaneous hydrolysis under hydrothermal conditions at 200°C. By doping ZrO₂ into TiO₂ and with increasing ZrO₂ content, the crystallite size of anatase was decreased, and the anatase-to-rutile phase transformation was retarded as much as 200°C. The anatase-type structure of ZrO₂-doped TiO₂ was maintained after heating at 1000°C for 1 h. The favorable effect of doping ZrO₂ to anatase-type TiO₂ on the photocatalytic activity was observed.     

Direct Formation of Zirconia-Doped Titania with Stable Anatase-Type Structure by Thermal Hydrolysis

Nanoparticles of anatase-type titania (TiO₂) doped with zirconia (ZrO₂) were directly synthesized from acidic precursor solutions of TiOSO₄ and Zr(SO₄)₂ by simultaneous hydrolysis, under mild hydrothermal conditions, at 200° and 240°C. Doping ZrO₂ into TiO₂ suppressed the crystal growth of anatase and shifted the phase transformation from anatase-type to rutile-type structure to a high temperature. The presence of an anatase-type structure with high crystallinity and high phase stability, even after annealing at 1000°C for 1 h, was fully achieved by both the doping of ZrO₂ into TiO₂ through direct precipitation and the simultaneous hydrolysis of the sulfate solutions.     

Microwave Properties of Ba2Ti9O20 Doped with Zirconium and Tin Oxides

The effects of solid-solution additives, their concentration, and the thermal processing schedule on the microstructure evolution and microwave properties of Ba₂Ti₉O₂₀ were studied. The solubility of tin in Ba₂Ti₉O₂₀ was higher than that of zirconium. Both elements facilitated the formation of phase-pure Ba₂Ti₉O₂₀ resonators. Ba₂Ti₉O₂₀ formed most easily with low dopant concentrations (0.82 mol%) (most impressively for ZrO₂ substitutions). Extended heat treatment (16 h versus 6 h at a temperature of 1390°C) resulted in volatilization of the grain-boundary liquid phase, which leads to more-porous resonators that have correspondingly lower permittivities. Increasing the dopant concentration resulted in minor increases in the quality factor; doping with zirconium led to slightly higher values (a maximum of 13900 at a frequency of 3 GHz). Increasing the measurement temperature degraded the quality factor (most precipitously for BaTi₄O₉). The temperature coefficient decreased as the ZrO₂ substitution increased but was largely unaffected by the SnO₂ concentration. Excess TiO₂ in a batch with no other dopants demonstrated degraded microwave properties.     

DTA and X-Ray Analysis Study of Nucleation and Crystallization of MgO-Al2O3-SiO2 Glasses Containing ZrO2, TiO2, and CeO2

Crystallization sequences of glasses with compositions in the tridymite primary phase field of the MgO-Al₂O₃-SiO₂ system were studied by DTA, X-ray diffraction, and other techniques. Crystallization was catalyzed by the addition of 7 wt% of either ZrO₂ or TiO₂. Up to 10 wt% CeO₂ was also added to some glasses. Metastable solid solutions with the high-quartz structure exhibiting varying lattice parameters commonly occurred at low temperatures, transforming into a high cordierite at higher temperatures. Depending on the composition and heat treatment, other phases also appeared, e.g. Ce₂Ti₂O₄ (Si₂O₇). The rate of crystallization was markedly dependent on the catalyst. Colloidal precipitation of the catalyst accompanied by bulk crystallization of the glass was observed with ZrO₂, but no crystalline TiO₂ was detected. In the presence of CeO₂, TiO₂ was a more effective catalyst than ZrO₂. Although CeO₂ lowered the melting temperatures of the glass-ceramics, it increased the stability of the glasses and inhibited volume nucleation, causing coarse structures to form on crystallization.     

Pb-Diffusion Barrier Layers for PbTiO3 Thin Films Deposited on Si Substrates by Metal Organic Chemical Vapor Deposition

The interfaces between metal organic chemical vapor deposited PbTiO₃ thin films and various diffusion barrier layers deposited on Si substrates were investigated by transmission electron microscopy. Several diffusion barrier thin films such as polycrystalline TiO₂, amorphous TiO₂, ZrO₂, and TiN were deposited between the PbTiO₃ thin film and Si substrate, because the deposition of PbTiO₃ thin films on bare Si substrates produced Pb silicate layers at the interface irrespective of the deposition conditions. The TiO₂ films were converted to PbTiO₃ by their reaction with diffused Pb and O ions during PbTiO₃ deposition at a gubstrate temperature of 410°C. Further diffusion of Pb and O induces formation of a Pb silicate layer at the interface. ZrO₂ did not seem to react with Pb and O during PbTiO₃ deposition at the same temperature, but the Pb and O ions that diffused through the ZrO₂ layer formed a Pb silicate layer between the ZrO₂ and Si substrate. The TiN films did not seem to react with Pb and O ions during the deposition of PbTiO₃ at 410°C, but reacted with PbTiO₃ to form a lead-deficient pyrochlore during postdeposition rapid thermal annealing at 700°C. However, TiN could effectively block the diffusion of Pb and O ions into the Si substrate and the formation of Pb silicate at the interface.     

Formation of Zirconia Titanate Solid Solution from Alkoxides

In the system ZrO₂–TiO₂, ZrTiO₄ solid solutions prepared by the simultaneous hydrolysis of zirconium and titanium alkoxides crystallize at low temperatures from amorphous materials between 30 and 70 mol% TiO₂. As zirconium is substituted for titanium, the solid solutions can be indexed in an orthorhombic unit cell with a and c decreasing linearly from 0.4832 to 0.4778 nm and from 0.5063 to 0.5002 nm, respectively, and b increasing linearly from 0.5401 to 0.5478 nm. The volume of the unit cell decreases continuously with increasing TiO₂ content. At higher temperatures the solid solutions decompose into ZrTiO₄ and either ZrO₂ (monoclinic) or TiO₂ (rutile), depeanding on the starting composition.     

Dopants in Flame Synthesis of Titania

The effect of dopants on the characteristics of titania particles made by oxidation of TiCl₄ in a laminar diffusion flame reactor is presented. Introduction of dopant SiCl₄ inhibits the transformation of anatase to rutile, due to the formation of interstitian solid solution of SiO₂ and TiO₂. Silica decreases the sintering rate of titania and decreases the primary particle size, and, as a result, the specific surface area increases. Intruduction of SnCl₄ enhances the transformation of anatase to rutile, due to the similar crystalline structure of SnO₂ and rutile titania. However, the presence of SnO₂ and rutile titania. However, the presence of SnO₂ does not affect the primary particle size or the specific surface area of titania particles. Introduction of AICI₃ enhances the transformation of anatase to rutile, due to the formation of excess oxygen vacancies as Al₂O₃ and TiO₂ form a substitutional solid solution.     

Sol–Gel Route to Synthesis of Microporous Ceramic Membranes: Preparation and Characterization of Microporous TiO2 and ZrO2 Xerogels

This paper focuses on the preparation and characterization of pure TiO₂ and ZrO₂ xerogels. The preparation method is based on a sol–gel technique using metal tert -amyloxides as precursors to produce nano-sized metal oxide particles which are subsequently packed in a gelation process, eventually resulting in microporous xerogele. The unsupported TiO₂ and ZrO₂ xerogele produced in this manner have a mean pore diameter less than 2 nm and more than 50% microporosity. However, these gels, in their pure form, are thermally stable only to 350°C. Improved thermal stabilities of mixed metal oxide xerogels will be reported elsewhere.     

Coherent Phase Diagram for Spinodal Decomposition in the Tetragonal Titanium Dioxide—Tin Oxide System

A microscopic calculation was carried out for spinodal decomposition in the tetragonal TiO₂—SnO₂ system by taking into account the contribution of the elastic free energy. Necessary elastic constants for the solid solutions and the elastic free energy of modulated structure were calculated in terms of interatomic potentials. A coherent phase diagram was obtained unambiguously from the calculated elastic free energy by using the interaction parameter determined by the experimental binodal line. The results were compared with the calculation based on the regular-solution model.     

Preparation of a Translucent, Conductive, Porous Nanocomposite

A translucent, conductive, porous nanocomposite was designed and prepared by depositing SnO₂ on the inner surfaces of the pores of a porous glass plate and on its outer surface using a chemical vapor deposition method. The porous nanocomposite almost maintained its large surface area and pore volume because the pores remained open after they were deposited with SnO₂. Conductivity between the two outer surfaces of the nanocomposite plate was confirmed for the first time.     

Synchrotron Radiation Ti-k XANES Study of TiO2─Y2O3-Stabilized Tetragonal Zirconia Polycrystals

Valence state and site symmetry of Ti ions in TiO₂–Y₂O₃–ZrO₂ powders with 2 mol% Y₂O₃ and 5, 10, 15, and 20 mol% TiO₂, respectively, are studied by X-ray absorption near-edge spectroscopy (XANES). Tetravalent Zr⁴⁺ ions are replaced predominantly by Ti⁴⁺ ions. Within the solubility region of Ti ions, a subsequent displacement of Ti ions from the center of symmetry is observed with increasing TiO₂ content in TiO₂–Y₂O₃-stabilized tetragonal ZrO₂ polycrystals (Ti-Y-TZP) under investigation. This behavior cannot be interpreted with a random substitution of Ti⁴⁺ ions on Zr⁴⁺ lattice sites. On the contrary, this correlation between the TiO₂ content in Ti-Y-TZP and the shift of Ti ions indicates an increasing interaction between the Ti ions with growing TiO₂ content, caused by a subsequent clustering of Ti ions.