共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
形变铜基原位复合材料是高强度高导电性铜合金的研究热点和发展方向之一,其突出的特点是具有超高的强度和良好的电导率。综述了铜基原位复合材料的研究现状,介绍了该类材料的制备工艺、组织演变、强化导电机理和性能特点,重点对其强化机理作了论述,并对该类材料的发展方向作了展望。 相似文献
3.
4.
高强高导铜合金的研究概述EI 总被引:55,自引:1,他引:54
高强高导铜合金是一类很有应用潜力的功能材料,近年来研究和开发应用高强高导铜基合金取得了显著成效。本文叙述了开发和研究高强高导铜合金的基本原理及制备方法,并对国内外高强高导铜合金的研究和开发应用现状进行了综述,同时,阐述了高强高导铜合金的发展方向及应用前景。 相似文献
5.
6.
7.
高强高铜合金是一类具有发展潜力的功能材料。评述了几种新发展起来的高强高导铜合金的制备技术,并对其存在问题及发展趋势进行了评论。分析指出快速凝固已成为进一步改善合金化法制备高强高导铜合金综合性能的有效手段;机械合金化、定向凝固和塑性变形等复合强化方法代表着今后高强高导铜合金的发展方向,但其工艺较为复杂,生产成本较高,有待进一步研究开发。 相似文献
8.
9.
10.
11.
高强度导电铜基复合材料 总被引:51,自引:1,他引:50
高强度导电铜基复合材料是一类很有应用潜力的功能材料,本文综述了该类材料的国内外研究现状,并对其设计原理,制备工艺及性能进行了介绍,最后阐述了该类材料的发展方向。 相似文献
12.
原子层沉积技术(ALD)是一项正处于发展之中、在许多领域具有巨大应用前景的新型材料制备技术,该技术在纳米结构和纳米复合结构的制备方面显示出独特的优势,在新型薄膜太阳能电池领域呈现出巨大的发展潜力和前景。首先概述了ALD技术的工作原理,简要介绍了近几年ALD技术在硅基太阳能电池和铜铟镓硒薄膜电池(CIGS)中的应用,然后重点综述了原子层沉积纳米功能薄膜在染料敏化太阳能电池(DSSCs)和有机-无机杂化钙钛矿太阳能电池(PSCs)为代表的新型薄膜太阳能电池中的应用。最后,总结了原子层沉积功能薄膜的特点和优势,展望了ALD在新能源材料与器件领域的应用前景和发展趋势。 相似文献
13.
高性能铜基弹性合金的开发是国内外铍铜行业普遍关注的焦点。本文概述了铍铜替代用高性能铜基弹性合金如Cu-Ti系、Cu-Ni-Sn系、Cu-Ni-Cr系、Cu-Ni-Mn系、Cu-Ni-Al系合金等的开发现状。指出了国内外在铍铜替代用高性能铜基弹性合金领域的研发及应用水平差距。 相似文献
14.
The chemical vapor deposition of copper and copper alloys 总被引:1,自引:0,他引:1
The chemical vapor deposition of copper and copper alloys for very large scale integrated interconnects is described using a series of Lewis base stabilized copper (I) 1,1,1,5,5,5-hexafluoro-2,4-pentanedionato (hfac) complexes. When the Lewis base is dimethyl-1,5-cyclooctadiene, high-purity copper metal is deposited at substrate temperatures from 150 to 250 °C. The deposition rate becomes mass-transport limited at the higher substrate temperatures, but excellent filling of sub-micron vias (3:1 aspect ratio) was achieved. The deposition of copper-tin alloys can also be achieved when vinyl trialkyltin is used as the Lewis base. At 180 °C, a carbon-free copper film, containing 0.6 at.%Sn, is deposited. A very strong substrate temperature dependence towards film purity was observed and results from thermal decomposition of the tin-containing ligand. These preliminary results demonstrate the utility of using single-source, mixed-metal precursors for copper alloy formation. 相似文献
15.
本文主要综述了金属深冷处理的发展历史,简要介绍了铜合金经深冷处理后性能的变化,国内外对深冷处理提高铜合金性能及其机理的研究。结合本人所阅读的文献综述了国内有关铜合金的深冷处理现状以及相关机理研究,就目前这个领域存在的问题和发展趋势进行了讨论。 相似文献
16.
Twelve homo- and hetero-nuclear copper(II) complexes of tetradentate Schiff base ligands containing N(4) donor sets have been prepared by employing several steps. The characterization and nature of bonding of the complexes have been deduced from elemental analysis, FT-IR, molar conductivity, magnetic moment measurements and thermal analysis. The three Schiff base ligands were further identified using (1)H and (13)C NMR spectra. All copper(II) complexes are 1:2 electrolytes as shown by their molar conductivities (Lambda(M)) in DMF and paramagnetic. The subnormal magnetic moment values of the di- and tri-nuclear complexes explained by a very strong anti-ferromagnetic interaction. The extraction ability of the ligands has been examined by the liquid-liquid extraction of selected transition metal (Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Pb(2+), Cd(2+), Hg(2+)) cations. The ligands show strong binding ability toward copper(II) ion. Furthermore the homo- and hetero-nuclear copper(II) complexes were each tested for their ability to catalyse the disproportionation of hydrogen peroxide in the presence of the added base imidazole. 相似文献
17.
18.
19.
20.
目前,对铜及铜合金在海洋环境中的腐蚀与防护有一定研究,但利用铜合金溶出铜离子应用于海洋防污的报道较少。以T2紫铜为研究对象,采用电化学工作站、ICP原子发射光谱分析仪、扫描电镜(SEM)与能谱仪(EDS)研究了T2紫铜在30℃静态人造海水中浸泡不同时长的铜离子释放速率及其腐蚀行为。结果表明:T2紫铜在30℃静态人造海水中的腐蚀速率与铜离子释放速率随着浸泡时间的延长呈现先迅速增大而后减小并逐渐趋于稳定的趋势;T2紫铜在静态人造海水中浸泡72~144 h内的铜离子释放速率能达到抑制藤壶附着的最低值10μg/(cm~2·d),随着浸泡时间的延长,T2紫铜浸泡144 h后的铜离子释放速率不能满足抑制藤壶附着的海洋防污要求;T2紫铜在静态人造海水中的腐蚀产物中包含Cu、O、Cl这3种元素。 相似文献