Synthesis,crystal structure,optical and third order nonlinear optical properties of phosphoric acid pyridine-1-ium-2-carboxylate

A semi-organic nonlinear optical material phosphoric acid pyridine-1-ium-2-carboxylate (PAPC) crystal has been synthesized and grown. Vibrational spectral analysis and NMR spectral analysis has been carried out. Mechanical studies on the grown crystal has been performed which disclose the material belongs to soft materials category. The thermal behaviour of the grown crystal has been investigated by thermogravimetric and differential thermal analysis. UV–Visible spectral analysis has been carried out which reveals that the grown crystal is transparent in the entire visible region with the lower cut-off wavelength of 298 nm and the derived optical constant attests the suitability of this material for non-linear optical applications. The third order nonlinearity has been studied by z-scan method and the enhanced third-order nonlinearity shows PAPC is a potential material for device applications. Second harmonic generation efficiency has been studied by Kurtz and Perry powder test and is found as 0.14 times greater than the KDP.     

Growth and characterization of a new semi-organic nonlinear optical sodium paranitrophenolate paranitrophenol dihydrate single crystal

A new semi-organic nonlinear optical sodium paranitrophenolate paranitrophenol dihydrate single crystal is grown successfully using methanol as solvent by slow evaporation technique to dimensions of 14 × 5 × 4 mm³ in a period of 7 days. The grown crystal is characterized by X-ray diffractometry and UV-Visible spectral analysis. X-ray diffraction data reveals that the crystal belongs to monoclinic system with space group C2. Optical absorption studies illustrate low absorption in the entire UV and Visible region. The second harmonic generation (SHG) efficiency of the crystal measured by Kurtz's powder technique infers that the crystal has NLO coefficient 5 times greater than that of KDP crystal. Remarkable mechanical strength with the work hardening coefficient less than 2 and thermal stability up to 120 °C of the grown crystal is reported.     

Growth and characterization of hexamethylenetetramine crystals grown from solution

Organic nonlinear optical single crystals of hexamethylenetetramine (HMT; 10 × 10 × 5 mm³) were prepared by crystallization from methanol solution. The grown crystals were subjected to various characterization techniques such as single crystal XRD, powder XRD, UV-Vis and electrical studies. Single crystal XRD analysis confirmed the crystalline structure of the grown crystals. Their crystalline nature was also confirmed by powder XRD technique. The optical transmittance property was identified from UV-Vis spectrum. Dielectric measurements were performed as a function of frequency at different temperatures. DC conductivity and photoconductivity studies were also carried out for the crystal. The powder second harmonic generation efficiency (SHG) of the crystal was measured using Nd:YAG laser and the efficiency was found to be two times greater than that of potassium dihydrogen phosphate (KDP).     

Effect of magnesium chloride on growth,crystalline perfection,structural, optical,thermal and NLO behavior of γ-glycine crystals

In the present study, single crystals of γ-glycine possessing excellent non-linear optical properties were successfully grown at room temperature in the presence of magnesium chloride (MgCl₂) for the first time by using the slow solvent evaporation method. The second harmonic conversion efficiency of γ-glycine crystal was determined using Kurtz powder technique with Nd:YAG laser and was found to be 6 times greater than that of the standard inorganic sample potassium dihydrogen phosphate (KDP). The crystalline perfection of the grown crystal was analyzed using high-resolution X-ray diffraction (HRXRD) rocking curve measurements. The grown crystal was subjected to single crystal XRD and powder XRD, which confirmed that the crystal has hexagonal structure and belongs to space group P3₁. Inductively coupled plasma optical emission spectrometry (ICP-OES) was carried out to quantify the concentration of Mg element in the grown γ-glycine single crystal. Fourier transform infrared (FTIR) spectral studies were made to identify the functional groups. The optical band gap was likewise estimated for γ-glycine crystal using UV–vis–NIR study. The optical measurements of γ-glycine crystal helped to calculate the optical constants such as refractive index (n), the extinction coefficient (K), electric susceptibility (χ_c) and both the real (∈_r) and imaginary (∈_i) components of the dielectric permittivity functions of photon energy, which is essentially required to develop optoelectronic devices. Thermogravimetric analysis (TGA) and differential thermal analysis (DTA) were used to study thermal stability and decomposition point of the grown crystal.     

Impact of nickel doping on structural,optical, electrical,and third-order NLO behavior of piperazinium L-tartrate single crystals

Slow evaporation technique was used to grow single crystals of pure and nickel (Ni)-doped piperazinium L-tartrate (PPLT). Powder crystal X-ray diffraction was used to characterize the structural properties of the grown crystals. Fourier transform infrared spectroscopy was used to determine the functional groups. In the visible band, both pure and Ni-doped PPLT crystals have low absorbance, indicating their utility in nonlinear optical (NLO) applications. PPLT crystals, both pure and Ni doped, have bandgap energies that indicate their insulating nature, indicating their utility in electronic applications. The growth pattern and dislocation density of the crystal are revealed by etching analysis. The electric field response of generated single crystals was investigated in terms of dielectric constant and dielectric loss as a function of the frequency and temperature, with the findings described. The efficiency of nickel-doped PPLT crystal is 2.86 times larger than potassium dihydrogen phosphate (KDP), whereas the efficiency of pure PPLT is 1.38 times greater than KDP, according to NLO testing measured by Kurtz powder method. Because metal ions were incorporated into the crystal lattice, the SHG efficiency of nickel-doped PPLT was somewhat improved.

     

Materials synthesis,crystal growth and third nonlinear optical properties of semiorganic crystal: 4-dimethylaminopyridine lithium nitrate (DMAPLN) crystal

4-dimethylaminopyridine lithium nitrate crystal (4-DMAPLN) was synthesized by the slow evaporation solution growth technique. The titular crystal was subjected to various studies to recognize its physicochemical properties. The crystalline nature and orthorhombic crystal system were revealed by single crystal and powder XRD. FTIR spectroscopy study confirms the various modes of vibrations available in the titular crystal. Linear optical studies show the lower cut-off wavelength of 280 nm with an optical bandgap value (E_g) of 4.3 eV. The electrical behavior of the 4-DMAPLN crystal was studied using dielectric studies. The mechanical behavior of the grown crystal was analyzed using the Vicker’s microhardness study, revealing that the grown crystal belongs to the hard category. The second-order nonlinear optical (NLO) behavior of 4-DMAPLN crystal was measured using Kurtz–Perry powder techniques and it was found to be 1.17 times higher than reference KDP. Z-scan analysis reveals 4-DMAPLN is a suitable candidate for optical limiting applications.

     

Synthesis,growth, optical,spectral, thermal and dielectric studies of a new nonlinear optical material : <Emphasis Type="SmallCaps">l</Emphasis>-proline 2,4-dichlorobenzoic acid single crystal

Good quality single crystals of organic nonlinear optical material l-proline 2,4-dichlorobenzoic acid (LPDCBA) were synthesized and grown by slow evaporation technique. The lattice parameters and space group were determined using single crystal XRD analysis. The optical absorbance and the lower cut-off wavelength of the LPDCBA were identified by UV–VIS–NIR studies. The modes of vibrations of different molecular groups present in the sample were identified by the FTIR spectral analysis. Dielectric measurement of LPDCBA were carried out at different frequencies. Thermal stability of LPDCBA were determined by TGA/DTA measurements. Laser induced damage threshold study was carried out for the grown crystal using Nd:YAG laser. The second harmonic generation efficiency were found to be 1.66 times greater than that of KDP.     

Melt growth of novel organic nonlinear optical material and its characterization

Ethyl P-amino benzoate (EPAB) is also known as benzocaine was recently identified as new organic non linear optical (NLO) material which is having nearly six times higher SHG efficiency than that of KDP. Hence, growth of unidirectional EPAB crystal gains importance for phase matching studies and this is the first melt growth report of EPAB single crystal. Seeding with the microtube in the present technique eliminates the need for pre-grown seed and has more probability to grow bulk single crystal. Growth direction of the μT-Cz grown EPAB single crystals was identified as <100> using X-ray powder diffraction studies. Thermal properties and optical transparency of the grown material were analyzed by TG and DTA and UV-VIS spectroscopic studies respectively. Laser damage threshold study shows nearly five times high damage threshold than KDP.     

Spatial light modulators for projection displays

Spatial light modulators (SLM's) consisting of a polymer-dispersed liquid crystal (PDLC) film and a Bi(12)SiO(20) photoconductor are discussed and demonstrated. This device, which uses light scattering in the PDLC film, has several advantages including no polarizer, a low optical loss, and video-rate operation. The device was designed by use of an electrical-image method. High-definition SLM's with a limiting resolution (36-50 line pairs/mm) were fabricated by stacking of an optimized mirror and the PDLC film. The device, which was incorporated into a Schlieren system with a 1-kW xenon lamp, provided high-contrast video images and a total luminous flux of 1000 lm.     

Growth, thermal and mechanical properties of new nonlinear optical barium bis-paranitrophenolate paranitrophenol tetrahydrate single crystal

Barium bis paranitrophenolate paranitrophenol tetrahydrate, a new semiorganic nonlinear optical single crystal has been grown by slow evaporation solution growth technique at room temperature of 30 °C. Crystal of dimensions of 29 mm × 11 mm × 5 mm was obtained in a period of 30 days. X-ray diffraction analysis reveal the newness of the crystal structure belonging to the orthorhombic class with lattice parameters a = 19.899(5) Å, b = 28.019(8) Å, c = 10.745(4) Å and α = β = γ = 90°. The grown crystal is examined for its nonlinear optical nature with Kurtz powder technique after being sieved for particle sizes between 5 and 100 μm and analyzed for its thermal and mechanical properties. The effective nonlinear optical coefficient being 16 times greater than that of KDP crystal, good thermal stability up to 120 °C with the Meyer's constant n < 2 helps fashion the crystal towards device geometry.     

Imaging with a rectangular phase grating applied to displacement metrology

We achieved displacement metrology with a high-amplitude signal by using a rectangular phase grating as the pupil in a grating imaging system. The imaging phenomenon with a pupil transmission grating that has a bilevel profile with a 50% duty ratio is discussed on the basis of the optical transfer function. By optimizing the imaging condition, we obtained high-contrast images with high light power under a magnified or demagnified imaging system. The amplitude of the signal in the displacement measurement was four times higher than that of the conventional grating imaging system with amplitude gratings.     

Ice-crystal absorption: a comparison between theory and implications for remote sensing

The problem of the disagreement between cirrus crystal sizes determined remotely and by in situ measurements is shown to be due to inappropriate application of Mie theory. We retrieved the absorption optical depth at 8.3 and 11.1 mum from 11 tropical anvil cirrus clouds, using data from the High Resolution Infrared Radiation Sounder (HIRS). We related the absorption optical depth ratio between the two wavelengths to crystal size (the size was defined in terms of the crystal median mass dimension) by assuming Mie theory applied to ice spheres and anomalous diffraction theory (ADT) applied to hexagonal columns, hexagonal plates, bullet rosettes, and aggregates (polycrystals). The application of Mie theory to retrievals yielded crystal sizes approximately one third those obtained with ADT. The retrievals of crystal size by use of HIRS data are compared with measurements of habit and crystal size obtained from in situ measurements of tropical anvil cirrus particles. The results of the comparison show that ADT provides the more realistic retrieval. Moreover, we demonstrate that at infrared wavelengths retrieval of crystal size depends on assumed habit. The reason why Mie theory predicts smaller sizes than ADT is shown to result from particle geometry and enhanced absorption owing to the capture of photons from above the edge of the particle (tunneling). The contribution of particle geometry to absorption is three times greater than from tunneling, but this process enhances absorption by a further 35%. The complex angular momentum and T-matrix methods are used to show that the contribution to absorption by tunneling is diminished as the asphericity of spheroidal particles is increased. At an aspect ratio of 6 the contribution to the absorption that is due to tunneling is substantially reduced for oblate particles, whereas for prolate particles the tunneling contribution is reduced by 50% relative to the sphere.     

Whole-angle spherical retroreflector using concentric layers of homogeneous optical media

Spherical retroreflectors have a much greater acceptance angle than conventional retroreflectors such as corner cubes. However, the optical performance of known spherical reflectors is limited by spherical aberration. It is shown that third-order spherical aberration may be corrected by using two or more layers of homogeneous optical media of different refractive indices. The performance of the retroreflector is characterized by the scattering (or radar) cross section, which is calculated by using optical design software. A practical spherical reflector is described that offers a significant increase in optical performance over existing devices. No gradient index components are required, and the device is constructed by using conventional optical materials and fabrication techniques. The experimental results confirm that the device operates correctly at the design wavelength of 690 nm.     

Micro gradient-index conical lenses: simulation and fabrication methods

In this paper, a micro gradient-index conical lens, which has a larger acceptance angle than a conventional microlens, is presented. Methods on how to simulate these lenses in commercial optical design software CodeV are introduced, and the effects of several index profiles and cone shapes are compared in simulation. Results show that a micro gradient-index conical lens has a four times larger acceptance angle compared with a microlens. Additionally, conical lenses with a Gaussian-index profile show a larger acceptance angle than those with a solid refractive index. Fabricated conical lenses show an acceptance angle of more than 27 degrees for a detection threshold of 50%, which agrees with the simulation result.     

Impact of Zernike-fit error on simulated high- and low-contrast acuity in keratoconus: implications for using Zernike-based corrections

This study examines the extent to which a Zernike-based optical correction can restore acuity in keratoconus as a function of disease severity and contrast level. Increasingly complete Zernike corrections in the presence of Zernike-fit error were simulated. Acuity for keratoconic eyes with <60 D maximum corneal power reached 20/13 with a fifth-order Zernike correction under high-contrast conditions and exhibited a loss of 0.1 logMAR (minimum angle of resolution) (from 20/32 to 20/40) for low-contrast conditions. Acuity for keratoconic eyes with >60 D maximum corneal power approached 20/13 with sixth-tenth-order corrections under high-contrast conditions but did not return to similar levels with a tenth-order correction for low-contrast conditions. The results suggest that fit error affects visual performance for more difficult tasks and that restoring high-contrast acuity (20/16 or better) using a fifth-order Zernike correction is not limited by Zernike=fit error for over 88% of keratoconus cases.     

DCTA对KDP晶体的快速生长与光学性能的影响

环己二胺四乙酸(DCTA)作为一种新型添加剂被加入到KDP晶体生长溶液中。采用“点籽晶”快速生长技术, 在掺杂100×10^-6 DCTA的饱和溶液中, 生长了KDP晶体, 生长速度达20 mm/d。研究了这种新型添加剂DCTA对快速生长的KDP晶体的生长习性和光学质量的影响, 并与常用添加剂EDTA的影响效果进行了对比。研究发现, 在KDP晶体生长溶液中添加100×10^-6 DCTA使生长溶液的亚稳区宽度提高了约10℃, 晶体(100)面的生长速度提高了3~10倍; 生长出的晶体在紫外波段的透过率上升了2~8倍, 晶体内部的光散射大大减轻, 激光损伤阈值也有所提高。添加剂DCTA对KDP晶体生长及性能的改善作用比同等浓度的EDTA更加显著。     

Microtube-Czochralski (μT-CZ) growth of bulk benzophenone single crystal for nonlinear optical applications

Microtube-Czochralski technique was employed to grow large size benzophenone single crystal for the first time. In conventional Czochralski pulling technique, the growth of bulk single crystal will be initiated by a pre-grown seed, whereas in microtube-Czochralski technique a microtube that is made out of a metal such as stainless steel (8 μm ID) can be used to grow bulk single crystal. A specially designed furnace having inert gas atmosphere, condensation free enclosure and in situ annealing facility was employed. Benzophenone crystal having cubic facet (15 mm) with high optical quality was grown when the following vital growth parameters are set to the corresponding optimized values such as pulling rate: 1–2 mm/h, seed rotation rate: 5–10 rpm and the axial thermal gradient: 8 °C/cm. The grown crystals were cut and polished. Thin plate like polished samples were used to justify the optical quality of the grown samples by UV–VIS–NIR spectroscopy. Powder SHG measurement shows that the grown samples exhibit three times higher second harmonic generation than potassium dihydrogen phosphate (KDP).     

Physical properties of lauric acid crystals grown with KBr in aqueous solution

Lauric acid crystals were grown with potassium bromide (LAPB) in aqueous solution at room temperature by slow solvent evaporation technique. The monoclinic structure of grown single crystal was studied by single-crystal X-ray diffraction and powder X-ray diffraction analyses. The Fourier transform infrared spectrum incorporates signatures of functional groups. The optical absorbance study reveals the UV cut-off wavelength as 230 nm. The Kurtz powder technique ensures that LAPB crystal has 1.1 times greater second harmonic generation efficiency than that of KDP crystals. The thermo-gravimetric and differential thermal analyses ensure that the material has good thermal stability. A dielectric behaviour of the sample material is studied in the frequency range \(10^{1}\)–\(10^{6}\)  Hz.     

Synthesis,crystal growth,structural, spectral,thermal, mechanical,linear and nonlinear optical studies of organic single crystal 4-Iodo 4-nitrostilbene (IONS): A potential NLO material

An organic nonlinear optical material 4-Iodo 4-nitrostilbene (IONS) has been synthesized and good optical quality single crystal was grown from ethyl methyl ketone solvent by the solution growth technique. Single and powder X-ray diffraction analyses reveals that the grown crystal belongs to monoclinic crystal system with noncentrosymmetric space group ‘P2₁’ and it has good crystalline nature. Functional groups and molecular structure of the title compound were confirmed by FTIR and ¹H NMR respectively. The UV–Vis–NIR absorption study reveals no absorption in the visible region and the cut-off wavelength was found to be at 412.84 nm, TG/DTA, mass spectral analysis, photoluminescence and microhardness studies have been carried out for the grown crystals and results are discussed in detail. The second harmonic efficiency of the IONS was determined by Kurtz–Perry powder technique which reveals that the IONS crystal (3.1 V) has greater efficiency i.e., 143 times to that of KDP (21.7 mV).     

Structural,thermal, dielectric,nonlinear optical properties and DFT investigations of a novel material 2-(6-chloropyridin-3-yl)-N'-(2,3-dihydro-1,4-benzodioxin-6-ylmethylidene)acetohydrazide for optoelectronic applications

A new organic nonlinear optical (NLO) material 2-(6-chloropyridin-3-yl)-N'-(2,3-dihydro-1,4-benzodioxin-6-ylmethylidene)acetohydrazide (CDA) has been synthesized by reflux method. Single crystals were grown by slow evaporation technique and the crystal structure was elucidated by single crystal X-ray diffraction method. Density functional theory (DFT) calculations at B3LYP/6–31+?+?G(d, p) basis set was used to predict the molecular geometry and were carried out further to comprehend the electronic structure, vibrational spectra, natural bonding orbitals (NBO), frontier molecular orbitals (FMO) and molecular electrostatic potential (MEP). An optical transparency at the cut-off wavelength of 355 nm was determined by UV–Vis–NIR spectroscopy. Thermal behavior of CDA was studied by TGA/DTA analysis. The dielectric constant (ε), dielectric loss (tan δ) and AC conductivity as a function of frequency and temperature was studied. Second Harmonic Generation (SHG) efficiency of the CDA was determined using Kurtz and Perry powder technique and was 0.5 times greater than that of the KDP crystal. The third-order nonlinear optical properties were investigated in solution by Z-scan technique using a continuous wave (CW) DPSS laser at the wavelength of 532 nm. The title compound exhibited significant two-photon absorption (β?=?2.228?×?10–4 cm W^?1), nonlinear refraction (n₂?=?1.095?×?10–8 cm² W^?1) and optical limiting (OL threshold?=?2.511?×?103 W cm^?2) under the CW regime. The nonlinear optical parameters were calculated using time-dependent Hartree–Fock (TDHF) method. The overall obtained results suggested that the studied CDA molecule could be a potential NLO material for frequency generator, optical limiters and optical switching applications.