Recent Progress in GaN‐Based Light‐Emitting Diodes

In the last few years the GaN‐based white light‐emitting diode (LED) has been remarkable as a commercially available solid‐state light source. To increase the luminescence power, we studied GaN LED epitaxial materials. First, a special maskless V‐grooved c‐plane sapphire was fabricated, a GaN lateral epitaxial overgrowth method on this substrate was developed, and consequently GaN films are obtained with low dislocation densities and an increased light‐emitting efficiency (because of the enhanced reflection from the V‐grooved plane). Furthermore, anomalous tunneling‐assisted carrier transfer in an asymmetrically coupled InGaN/GaN quantum well structure was studied. A new quantum well structure using this effect is designed to enhance the luminescent efficiency of the LED to ～72%. Finally, a single‐chip phosphor‐free white LED is fabricated, a stable white light is emitted for currents from 20 to 60 mA, which makes the LED chip suitable for lighting applications.     

One‐Step Synthesis of Silica‐Coated Carbon Dots with Controllable Solid‐State Fluorescence for White Light‐Emitting Diodes

Carbon dots (CDots)‐based solid‐state luminescent materials have important applications in light‐emitting devices owing to their outstanding optical properties. However, it still remains a challenge to develop multiple‐color‐emissive solid‐state CDots, due to the serious self‐quenching of the CDots in the aggregation or solid state. Herein, a one‐step synthesis of multiple‐color‐emissive solid‐state silica‐coated CDots (silica/CDots) composites by controlling CDots loading fraction and composite morphology to realize the adjustment of emitting color is reported. The emission of resultant silica/CDots composites shifts from blue to orange with the photoluminescence quantum yields of 57.9%, 34.3%, and 32.7% for blue, yellow, and orange emitting, respectively. Furthermore, the yellow emitting silica/CDots composites exhibit an excellent fluorescence thermal stability, and further have been applied to fabricate white‐light‐emitting devices with a high color rendering index of above 80.     

Stretchable Organometal‐Halide‐Perovskite Quantum‐Dot Light‐Emitting Diodes

Stretchable light‐emitting diodes (LEDs) and electroluminescent capacitors have been reported to potentially bring new opportunities to wearable electronics; however, these devices lack in efficiency and/or stretchability. Here, a stretchable organometal‐halide‐perovskite quantum‐dot LED with both high efficiency and mechanical compliancy is demonstrated. The hybrid device employs an ultrathin (<3 µm) LED structure conformed on a surface‐wrinkled elastomer substrate. Its luminescent efficiency is up to 9.2 cd A^?1, which is 70% higher than a control diode fabricated on the rigid indium tin oxide/glass substrate. Mechanical deformations up to 50% tensile strain do not induce significant loss of the electroluminescent property. The device can survive 1000 stretch–release cycles of 20% tensile strain with small fluctuations in electroluminescent performance.     

Electrically Pumped White‐Light‐Emitting Diodes Based on Histidine‐Doped MoS2 Quantum Dots

MoS₂ quantum dots (QDs)‐based white‐light‐emitting diodes (QD‐WLEDs) are designed, fabricated, and demonstrated. The highly luminescent, histidine‐doped MoS₂ QDs synthesized by microwave induced fragmentation of 2D MoS₂ nanoflakes possess a wide distribution of available electronic states as inferred from the pronounced excitation‐wavelength‐dependent emission properties. Notably, the histidine‐doped MoS₂ QDs show a very strong emission intensity, which exceeds seven times of magnitude larger than that of pristine MoS₂ QDs. The strongly enhanced emission is mainly attributed to nitrogen acceptor bound excitons and passivation of defects by histidine‐doping, which can enhance the radiative recombination drastically. The enabled electroluminescence (EL) spectra of the QD‐WLEDs with the main peak around 500 nm are found to be consistent with the photoluminescence spectra of the histidine‐doped MoS₂ QDs. The enhanced intensity of EL spectra with the current increase shows the stability of histidine‐doped MoS₂ based QD‐WLEDs. The typical EL spectrum of the novel QD‐WLEDs has a Commission Internationale de l'Eclairage chromaticity coordinate of (0.30, 0.36) exhibiting an intrinsic broadband white‐light emission. The unprecedented and low‐toxicity QD‐WLEDs based on a single light‐emitting material can serve as an excellent alternative for using transition metal dichalcogenides QDs as next generation optoelectronic devices.     

Degradation Mechanisms in Small‐Molecule and Polymer Organic Light‐Emitting Diodes

Degradation in organic light‐emitting diodes (OLEDs) is a complex problem. Depending upon the materials and the device architectures used, the degradation mechanism can be very different. In this Progress Report, using examples in both small molecule and polymer OLEDs, the different degradation mechanisms in two types of devices are examined. Some of the extrinsic and intrinsic degradation mechanisms in OLEDs are reviewed, and recent work on degradation studies of both small‐molecule and polymer OLEDs is presented. For small‐molecule OLEDs, the operational degradation of exemplary fluorescent devices is dominated by chemical transformations in the vicinity of the recombination zone. The accumulation of degradation products results in coupled phenomena of luminance‐efficiency loss and operating‐voltage rise. For polymer OLEDs, it is shown how the charge‐transport and injection properties affect the device lifetime. Further, it is shown how the charge balance is controlled by interlayers at the anode contact, and their effects on the device lifetime are discussed.     

Efficient Red Perovskite Light‐Emitting Diodes Based on Solution‐Processed Multiple Quantum Wells

This paper reports a facile and scalable process to achieve high performance red perovskite light‐emitting diodes (LEDs) by introducing inorganic Cs into multiple quantum well (MQW) perovskites. The MQW structure facilitates the formation of cubic CsPbI₃ perovskites at low temperature, enabling the Cs‐based QWs to provide pure and stable red electroluminescence. The versatile synthesis of MQW perovskites provides freedom to control the crystallinity and morphology of the emission layer. It is demonstrated that the inclusion of chloride can further improve the crystallization and consequently the optical properties of the Cs‐based MQW perovskites, inducing a low turn‐on voltage of 2.0 V, a maximum external quantum efficiency of 3.7%, a luminance of ≈440 cd m^?2 at 4.0 V. These results suggest that the Cs‐based MQW LED is among the best performing red perovskite LEDs. Moreover, the LED device demonstrates a record lifetime of over 5 h under a constant current density of 10 mA cm^?2. This work suggests that the MQW perovskites is a promising platform for achieving high performance visible‐range electroluminescence emission through high‐throughput processing methods, which is attractive for low‐cost lighting and display applications.     

High‐Performance,Solution‐Processed,and Insulating‐Layer‐Free Light‐Emitting Diodes Based on Colloidal Quantum Dots

Quantum‐dot light‐emitting diodes (QLEDs) may combine superior properties of colloidal quantum dots (QDs) and advantages of solution‐based fabrication techniques to realize high‐performance, large‐area, and low‐cost electroluminescence devices. In the state‐of‐the‐art red QLED, an ultrathin insulating layer inserted between the QD layer and the oxide electron‐transporting layer (ETL) is crucial for both optimizing charge balance and preserving the QDs' emissive properties. However, this key insulating layer demands very accurate and precise control over thicknesses at sub‐10 nm level, causing substantial difficulties for industrial production. Here, it is reported that interfacial exciton quenching and charge balance can be independently controlled and optimized, leading to devices with efficiency and lifetime comparable to those of state‐of‐the‐art devices. Suppressing exciton quenching at the ETL–QD interface, which is identified as being obligatory for high‐performance devices, is achieved by adopting Zn_0.9Mg_0.1O nanocrystals, instead of ZnO nanocrystals, as ETLs. Optimizing charge balance is readily addressed by other device engineering approaches, such as controlling the oxide ETL/cathode interface and adjusting the thickness of the oxide ETL. These findings are extended to fabrication of high‐efficiency green QLEDs without ultrathin insulating layers. The work may rationalize the design and fabrication of high‐performance QLEDs without ultrathin insulating layers, representing a step forward to large‐scale production and commercialization.     

Extremely Vivid,Highly Transparent,and Ultrathin Quantum Dot Light‐Emitting Diodes

Displaying information on transparent screens offers new opportunities in next‐generation electronics, such as augmented reality devices, smart surgical glasses, and smart windows. Outstanding luminance and transparency are essential for such “see‐through” displays to show vivid images over clear background view. Here transparent quantum dot light‐emitting diodes (Tr‐QLEDs) are reported with high brightness (bottom: ≈43 000 cd m^?2, top: ≈30 000 cd m^?2, total: ≈73 000 cd m^?2 at 9 V), excellent transmittance (90% at 550 nm, 84% over visible range), and an ultrathin form factor (≈2.7 µm thickness). These superb characteristics are accomplished by novel electron transport layers (ETLs) and engineered quantum dots (QDs). The ETLs, ZnO nanoparticle assemblies with ultrathin alumina overlayers, dramatically enhance durability of active layers, and balance electron/hole injection into QDs, which prevents nonradiative recombination processes. In addition, the QD structure is further optimized to fully exploit the device architecture. The ultrathin nature of Tr‐QLEDs allows their conformal integration on various shaped objects. Finally, the high resolution patterning of red, green, and blue Tr‐QLEDs (513 pixels in.^?1) shows the potential of the full‐color transparent display.