Improved Synthesis of Pyrroles and Indoles via Lewis Acid‐Catalyzed Mukaiyama–Michael‐Type Addition/Heterocyclization of Enolsilyl Derivatives on 1,2‐Diaza‐1,3‐Butadienes. Role of the Catalyst in the Reaction Mechanism

The Mukaiyama–Michael‐type addition of various silyl ketene acetals or silyl enol ethers on some 1,2‐diaza‐1,3‐butadienes proceeds at room temperature in the presence of catalytic amounts of Lewis acid affording by heterocyclization 1‐aminopyrrol‐2‐ones and 1‐aminopyrroles, respectively. 1‐Aminoindoles have been also obtained by the same addition of 2‐(trimethylsilyloxy)‐1,3‐cyclohexadiene on some 1,2‐diaza‐1,3‐butadienes and subsequent aromatization. Mechanistic investigations indicate the coordination by Lewis acid of the enolsilyl derivative and its 1,4‐addition on the azo‐ene system of 1,2‐diaza‐1,3‐butadienes. The migration of the silyl group from a hydrazonic to an amidic nitrogen, its acidic cleavage and the final internal heterocyclization give the final products. Based on NMR studies and ab initio calculations, a plausible explanation for the migration of the silyl protecting group is presented.     

Highly trans‐1,4‐specific polymerization of 1,3‐butadiene catalyzed by [2,6‐bis{(4S)‐ (−)‐isopropyl‐2‐oxazolin‐2‐yl}pyridine] chromium complex activated with modified methylaluminoxane

Chromium complexes with N,N,N‐tridentate ligands, LCrCl₃ (L = 2,6‐bis{(4S)‐(?)‐isopropyl‐2‐oxazolin‐2‐yl}pyridine ( 1 ), 2,2′:6′,2″‐terpyridine ( 2 ), and 4,4′,4″‐tri‐tert‐butyl‐2,2′:6′,2″‐terpyridine ( 3 )), were prepared. The structures of 1 and 2 were determined by X‐ray crystallography. Upon activation with modified methylaluminoxane (MMAO), 1 catalyzed the polymerization of 1,3‐butadiene, while 2 and 3 was inactive. The obtained poly(1,3‐butadiene) obtained with 1 ‐MMAO was found to have completely trans‐1,4 structure. The 1 ‐MMAO system also showed catalytic activity for the polymerization of isoprene to give polyisoprene with trans‐1,4 (68%) and cis‐1,4 (32%) structure. Copyright © 2011 Society of Chemical Industry     

Well‐defined polymers containing 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane moiety: Synthesis,mechanism, and applications in catalysis

A series of well‐defined different chain lengths polymers, which contain the organometallic 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane core in the main chain, was obtained in one‐pot via a novel 1,3‐dichloro‐tetra‐n‐butyl‐distannoxane (complex A )/azobisisobutyronitrile (AIBN) initiating system used in reverse atom transfer radical polymerization of styrene in different concentrations. The introduction of organotin complex A was supported by ¹H‐NMR, ¹³C–NMR, and the Inductive Coupled Plasma Emission Spectrometer analysis of the organotin‐containing polymer. Moreover, the mechanism of polymerization was investigated by changing the ratio of complex A to AIBN. It was concluded that the complex A not only acted as an important part of the initiator system but also introduced the functional organometallic group into the polymer chain. Additionally, the organotin‐containing polymer could be used as catalyst for esterification, and the reaction products' conversion could reach high up to 99% and does not decrease after four successive cycles. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Polymerization of cyclic monomers. VII. Synthesis and radical polymerization of 1,3‐bis[(1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzenes

1,3‐Bis[(1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzenes 1 [RO: CH₃O (a), C₂H₅O (b)] were synthesized by the esterification of the corresponding 1‐alkoxycarbonyl‐2‐vinylcyclopropane‐1‐carboxylic acids with resorcinol. The structure of the new vinylcyclopropanes was confirmed by elemental analysis and infrared (IR), ¹H nuclear magnetic resonance (¹H‐NMR), and ¹³C nuclear magnetic resonance (¹³C‐NMR) spectroscopy. The radical polymerization of difunctional 2‐vinyl‐cyclopropanes in bulk with 2,2′‐azoisobutyronitrile (AIBN) results in hard, transparent, crosslinked polymers. During the bulk polymerization of the crystalline bis[(1‐methoxycarbonyl‐2‐vinylcyclopropane‐1‐yl)carboxy]benzene 1a, an expansion in volume of about 1% took place. The radical solution polymerization of 1a resulted in a soluble polymer with pendant 2‐vinylcyclopropane groups. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1775–1782, 1999     

Influence of imine‐carbon substituent in 6‐bromo‐2‐iminopyridine‐based cobalt(II) complexes on 1,3‐butadiene polymerization

6‐Bromo‐2‐iminopyridine cobalt(II) complexes bearing different imine‐carbon substituents ( Co1 – Co7 ) were synthesized and subsequently employed for 1,3‐butadiene polymerization. All the complexes were identified using Fourier transform infrared spectra and elemental analysis, and complexes Co1 and Co3 were further characterized using single‐crystal X‐ray diffraction analysis, demonstrating they adopted distorted trigonal bipyramidal and tetrahedral geometries, respectively. Activated by methylaluminoxane, these complexes exhibited high cis‐1,4 selectivity, and the activity was highly dependent on the substituent at the imine‐carbon position of the ligand. Addition of PPh₃ to the polymerization systems could enhance the catalytic activity and simultaneously switched the selectivity from cis‐1,4 to cis‐1,2 manner. On the basis of the obtained results, a plausible mechanism involving the regulation of selectivity and activity is proposed. © 2019 Society of Chemical Industry     

Binary copolymerization of 4‐methyl‐1,3‐pentadiene with styrene,butadiene and isoprene catalysed by a titanium [OSSO]‐type catalyst

Binary copolymerization of 4‐methyl‐1,3‐pentadiene (4MPD) with styrene, butadiene and isoprene promoted by the titanium complex dichloro{1,4‐dithiabutanediyl‐2,2′‐bis[4,6‐bis(2‐phenyl‐2‐propyl)phenoxy]}titanium activated by methylaluminoxane is reported. All the copolymers are obtained in a wide range of composition and the molecular weight distributions obtained from gel permeation chromatographic analysis of the copolymers are coherent with the materials being copolymeric in nature. The copolymer microstructure was fully elucidated by means of ¹H NMR and ¹³C NMR spectroscopy. Differential scanning calorimetry shows an increase of glass transition temperature (T_g) with the amount of 4MPD in the copolymers with butadiene and isoprene, while in the copolymers with styrene T_g is increased on increasing the amount of styrene. © 2016 Society of Chemical Industry     

Gas phase polymerization of 1,3‐butadiene with supported neodymium‐based catalyst: Investigation of molecular weight

The gas phase polymerization of 1,3‐butadiene (Bd), with supported catalyst Nd(naph)₃/Al₂Et₃Cl₃/Al(i‐Bu)₃ or/and Al(i‐Bu)₂H, was investigated. The polymerization of Bd with neodymium‐based catalysts yielded cis‐1,4 (97.2–98.9%) polybutadiene with controllable molecular weight (MW varying from 40 to 80 × 10⁴ g mol^?1). The effects of reaction temperature, reaction time, Nd(naph)₃/Al(i‐Bu)₃ molar ratio, and cocatalyst component on the catalytic activity and molecular weight of polymers were examined. It was found that there are two kinds of active sites in the catalyst system, which mainly influenced the MW and molecular weight distribution of polybutadiene. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 1945–1949, 2004     

Diversity‐Oriented Synthesis of Functionalized 1‐Aminopyrroles by Regioselective Zinc Chloride‐Catalyzed,One‐Pot ‘Conjugate Addition/Cyclization’ Reactions of 1,3‐Bis(silyl enol ethers) with 1,2‐Diaza‐1,3‐butadienes

In a convenient one‐pot process, the easily accessible 1,2‐diaza‐1,3‐butadienes and 1,3‐bis(silyl enol ethers) are converted into the previously unknown functionalized 1‐aminopyrroles and 1‐amino‐4,5,6,7‐tetrahydroindoles. The domino reaction proceeds through a zinc chloride‐catalyzed ‘conjugate addition/cyclization’ sequence.     

Synthesis of poly(methylphenylsiloxane) rich in syndiotacticity by Rh‐catalysed stereoselective cross‐dehydrocoupling polymerization of optically active 1,3‐dimethyl‐1,3‐diphenyldisiloxane derivatives

Cross‐dehydrocoupling reactions of (R)‐methyl(1‐naphthyl)phenylsilane (>99%ee) with (S)‐methyl(1‐naphthyl)phenylsilanol (>99% ee) proceeded with 82–99% retention of configuration of chiral silicon centres in the presence of various Rh‐catalysts. Cross‐dehydrocoupling polymerization of 1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disiloxanediol with 1,3‐dihydro‐1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disiloxane gave poly(methylphenylsiloxane) of moderate molecular weight in toluene at 60 °C in the presence of [RhCl(cod)]₂ (5.0 mol%) and triethylamine (1.0 equivalent). Assignment of the triad signals of the resulting polymer was made by ¹H NMR spectroscopy of the methyl proton (I = 0.04, H = 0.09 and S = 0.14 ppm) and ¹³C NMR spectroscopy of the ipso carbon of the phenyl group (S = 136.7, H = 136.9, and I = 137.1 ppm). Although the reaction of optically pure (S,S)‐1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disiloxanediol with 1,3‐dihydro‐1,3‐dimethyl‐1,3‐diphenyl‐1,3‐disiloxane [(S,S):(S,R):(R,R)] = 84:16:0] gave a poly(methylphenylsiloxane) of rather low molecular weight, its triad tacticity was found to be rich in syndiotacticity (S:H:I = 60:32:8) by ¹³C NMR spectroscopy. © 2001 Society of Chemical Industry     

Effects of 1,2‐butadiene on the anionic copolymerization of styrene and 1,3‐butadiene in the presence of polar additives

1,2‐Butadiene is shown to be a chain terminating/transferring agent in butyllithium‐initiated diene polymerization. The influence of 1,2‐butadiene on the anionic copolymerization of 1,3‐butadiene and styrene is investigated using n‐butyllithium as initiator and tetrahydrofuran or N,N,N′,N′‐tetramethylethylenediamine as polar additive. A decrease of copolymerization rate is observed on the addition of 1,2‐butadiene. On introducing 1,2‐butadiene, the number average molecular weight (M_n ) decreases and the molecular weight distribution broadens. The vinyl content of copolymer increases slightly with an increase of 1,2‐butadiene. During the copolymerization, 1,2‐butadiene in the presence of a high ratio of polar additives to n‐butyllithium greatly decreases the copolymerization rate, resulting in a lower value of M_n and a narrower molecular weight distribution than that found for a low ratio of polar additives to n‐butyllithium. This evolution can be explained by the base‐catalyzed isomerization of 1,2‐butadiene to form 1‐butylene in the presence of polar additives. With an increasing amount of 1,2‐butadiene, the vulcanized rubber exhibits an increased rolling resistance and a reduced wet skid resistance owing to the decrease of coupling efficiency. These results further indicate the activity of alkynyllithium derivatives produced by the reaction of alkyllithium and 1‐butyne is less than that of the alkyllithium. Copyright © 2007 Society of Chemical Industry     

RAFT polymerization of N‐vinyl pyrrolidone using prop‐2‐ynyl morpholine‐4‐carbodithioate as a new chain transfer agent

RAFT polymerization of N‐vinyl pyrrolidone (NVP) has been investigated in the presence of chain transfer agent (CTA), i.e., prop‐2‐ynyl morpholine‐4‐carbodithioate (PMDC). The influence of reaction parameters such as monomer concentration [NVP], molar ratio of [CTA]/[AIBN, i.e., 2,2′‐azobis (2‐methylpropionitrile)] and [NVP]/[CTA], and temperature have been studied with regard to time and conversion limit. This study evidences the parameters leading to an excellent control of molecular weight and molar mass dispersity. NVP has been polymerized by maintaining molar ratio [NVP]: [PMDC]: [AIBN] = 100 : 1 : 0.2. Kinetics of the reaction was strongly influenced by both temperature and [CTA]/[AIBN] ratio and to a lesser extent by monomer concentration. The activation energy (E_a = 31.02 kJ mol^?1) and enthalpy of activation (ΔH^?= 28.29 kJ mol^?1) was in a good agreement to each other. The negative entropy of activation (ΔS^? = ?210.16 J mol^‐1K^‐1) shows that the movement of reactants are highly restricted at transition state during polymerization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis of 1,3‐benzodioxole end‐functionalized polymers via reversible addition–fragmentation chain transfer polymerization

Reversible addition–fragmentation chain transfer (RAFT) polymerization of styrene was carried out in the presence of a novel RAFT reagent, bearing 1,3‐benzodioxole group, benzo [1,3]dioxole‐5‐carbodithioic acid benzo [1,3]dioxol‐5‐ylmethyl ester (BDCB), to prepare end‐functionalized polystyrene. The polymerization results showed that RAFT polymerization of styrene could be well controlled. Number–average molecular weight (M_n(GPC)) increased linearly with monomer conversion, and molecular weight distributions were narrow (M_w/M_n < 1.4). The successful reaction of chain extension and analysis of ¹H NMR spectra confirmed the existence of the functional 1,3‐benzodioxole group at the chain‐end of polystyrene. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 99: 3535–3539, 2006     

In Situ Preparation of a Compatibilized Poly(cis‐1,4‐butadiene)/Poly(ε‐caprolactone) Blend

The ternary Ziegler‐Natta‐type catalyst system based on neodymium versatate (NdV), diisobutylaluminium hydride (DIBAH) and ethylaluminium sesquichloride (EASC) was used for the in situ preparation of a compatibilized blend consisting of poly(cis‐1,4‐butadiene) (BR = butadiene rubber) and poly(ε‐caprolactone) (PCL). Poly(cis‐1,4‐butadiene)‐block‐poly(ε‐caprolactone) which acts as compatibilizer for the two immiscible polymers BR and PCL was obtained by a two step sequential polymerization with the preparation of a living cis‐1,4‐BR building block in the first stage and the subsequent polymerization of CL during the second stage. This preparation method resulted in a polymer blend comprising the homopolymers BR and PCL as well as the block copolymer BR‐block‐PCL. For detailed characterization the block copolymer was separated from the respective homopolymers BR and PCL by means of fractionation with the binary solvent mixture dimethylformamide/methylcyclohexane (DMF/MCH) which mixes well at elevated temperature and exhibits phase separation at ambient temperature. ¹H NMR, IR, SEC and TEM were used for characterization of the block copolymer.

TEM of BR‐block‐PCL.     

Simultaneous refolding,purification, and immobilization of recombinant Fibrobacter succinogenes 1,3‐1,4‐β‐D‐glucanase on artificial oil bodies

BACKGROUND: 1,3‐1,4‐β‐D‐glucanase (1,3‐1,4‐β‐D‐glucan 4‐glucanohydrolase; EC 3.2.1.73) has been used in a range of industrial processes. As a biocatalyst, it is better to use immobilized enzymes than free enzymes, therefore, the immobilization of 1,3‐1,4‐β‐D‐glucanase was investigated. RESULTS: A 1,3‐1,4‐β‐D‐glucanase gene from Fibrobacter succinogenes was overexpressed in Escherichia coli as a recombinant protein fused to the N terminus of oleosin, a unique structural protein of seed oil bodies. With the reconstitution of the artificial oil bodies (AOBs), refolding, purification, and immobilization of active 1,3‐1,4‐β‐D‐glucanase was accomplished simultaneously. Response surface modeling (RSM), with central composite design (CCD), and regression analysis were successfully applied to determine the optimal temperature and pH conditions of the AOB‐immobilized 1,3‐1,4‐β‐D‐glucanase. The optimal conditions for the highest immobilized 1,3‐1,4‐β‐D‐glucanase activity (7.1 IU mg^?1 of total protein) were observed at 39 °C and pH 8.8. Furthermore, AOB‐immobilized 1,3‐1,4‐β‐D‐glucanase retained more than 70% of its initial activity after 120 min at 39 °C, and it was easily and simply recovered from the surface of the solution by brief centrifugation; it could be reused eight times while retaining more than 80% of its activity. CONCLUSIONS: These results indicate that the AOB‐based system is a comparatively simple and effective method for simultaneous refolding, purification, and immobilization of 1,3‐1,4‐β‐D‐glucanase. Copyright © 2009 Society of Chemical Industry     

1,2‐Polymerization of 1,3‐butadiene with Cr(acac)3‐alkylaluminum catalysts

The polymerization of butadiene (Bd) with chromium(III) acetylacetonato [Cr(acac)₃]‐trialkylaluminum (AlR₃) or methylaluminoxane (MAO) catalysts was investigated for the synthesis of 1,2‐poly(Bd). The polymerization of Bd was found to proceed with Cr(acac)₃‐AlR₃ (R‐Me, Et, i‐Bu) catalysts to give poly(Bd) with a high 1,2‐vinyl content, but highly isotactic 1,2‐poly(Bd) was not synthesized. The Cr(acac)₃‐MAO catalyst gave a polymer consisting of low 1,2 units. The effects of the Al/Cr mole ratios on the polymerization of Bd with the Cr(acac)₃‐AlR₃ catalysts were observed. With an increase of Al/Cr mole ratios, the isotactic (mm) content of the polymer increased but the 1,2‐vinyl contents decreased. The effects of the aging time and temperatures of the catalysts on the polymerization of Bd with the Cr(acac)₃‐AlR₃ catalysts were also observed, and the lower polymerization temperature and the prolonged aging time were favored to produce the 1,2‐vinyl structure. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 78: 1621–1627, 2000     

1,3‐butadiene polymerization using Co/Nd‐based Ziegler/Natta catalyst: Microstructures and properties of butadiene rubber

Among Ziegler‐Natta catalysts used for 1,3‐butadiene (1,3‐BD) polymerization, the advantage of a neodymium (Nd)‐based catalyst is that it provides butadiene rubber (BR) with a high content of cis?1,4 configuration and a low amount of vinyl?1,2 units. Whereas, a cobalt (Co)‐based catalyst can produce BR with a low content of trans?1,4 configuration. Thus, this research was aimed to prepare BR containing a high content of cis?1,4 configuration with low amounts of both trans?1,4 and vinyl?1,2 units using a combination of Nd‐ and Co‐based Ziegler/Natta catalysts with triethyl aluminum (TEAL) and diethyl aluminum chloride (DEAC) acting as a co‐catalyst and a chlorinating agent, respectively. The effects of the molar Co/Nd ratio, TEAL concentration, DEAC loading, 1,3‐BD content, solvent type, and reaction temperature on % conversion, microstructures, molecular weight, and molecular weight distribution of the obtained BR (Co/Nd‐BR) were evaluated. The Co/Nd‐BR having >97% of cis?1,4 configuration, <2% of trans?1,4 structure, and <1% of vinyl?1,2 unit with >80% conversion was achieved when 3.01 M of 1,3‐BD concentration was treated in a toluene/cyclohexane mixture (7/3 [w/w]). The Co/Nd‐BR exhibited no gel formation with high mechanical performance, which was equivalent to commercial BR produced from a Nd‐based catalyst system. POLYM. ENG. SCI., 55:14–21, 2015. © 2014 Society of Plastics Engineers     

Regioselective Cobalt‐Catalysed Hydrovinylation for the Synthesis of Non‐Conjugated Enones and 1,4‐Diketones

The highly regioselective cobalt‐catalysed 1,4‐hydrovinylation of terminal alkenes with 2‐trimethylsilyloxy‐1,3‐butadiene generates in a stereospecific fashion unsaturated E‐configured silyl enol ether intermediates that are suitable for diastereoselective Mukaiyama‐aldol reactions with bulky aliphatic aldehydes. The acidic hydrolysis of the enol ethers to γ,δ‐unsaturated ketones followed by ozonolysis can be used for the synthesis of various 1,4‐diketones and polycarbonyl derivatives. The 1,4‐diketones and polycarbonyl derivatives were successfully tested for the synthesis of some mono‐ and bis‐pyrrole derivatives. The γ,δ‐unsaturated ketones are useful building blocks (e.g., in natural product synthesis) and can be generated in a one‐pot procedure.     

Anionic polymerization of 1,3‐cyclohexadiene: Addition of poly(1,3‐cyclohexadienyl)lithium to fullerene‐C60

The addition of poly(1,3‐cyclohexadiene) (PCHD) carbanion to fullerene‐C₆₀ (C₆₀) was examined using poly(1,3‐cyclohexadienyl)lithium (PCHDLi), PCHDLi/1,4‐diazabicyclo[2,2,2]octane (DABCO), and PCHDLi/N,N,N′,N′‐tetramethylethylenediamine (TMEDA). The reactivity of PCHD carbanions was in the order of PCHDLi > PCHDLi/DABCO > PCHDLi/TMEDA, regardless of the polymer main chain structure. PCHDLi, PCHDLi/DABCO, and PCHDLi/TMEDA in toluene formed σ‐structures, σ‐ and π‐structures, and π‐structures, respectively. The degree of localization on the terminal carbanion was a main factor for control of this addition reaction. In addition, all 1,2‐cyclohexadiene (1,2‐CHD) unit sequences contributed to preventing the addition reaction. That is, large steric hindrance of the polymer main chain was another important factor to control the addition reaction. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of homo‐ and copolymers of 3‐(2‐cyano ethoxy)methyl‐ and 3‐[methoxy(triethylenoxy)]methyl‐3′‐methyl‐oxetane

Two oxetane‐derived monomers 3‐(2‐cyanoethoxy)methyl‐ and 3‐(methoxy(triethylenoxy)) methyl‐3′‐methyloxetane were prepared from the reaction of 3‐methyl‐3′‐hydroxymethyloxetane with acrylonitrile and triethylene glycol monomethyl ether, respectively. Their homo‐ and copolyethers were synthesized with BF₃· Et₂O/1,4‐butanediol and trifluoromethane sulfonic acid as initiator through cationic ring‐opening polymerization. The structure of the polymers was characterized by FTIR and¹H NMR. The ratio of two repeating units incorporated into the copolymers is well consistent with the feed ratio. Regarding glass transition temperature (T_g), the DSC data imply that the resulting copolymers have a lower T_g than pure poly(ethylene oxide). Moreover, the TGA measurements reveal that they possess in general a high heat decomposition temperature. The ion conductivity of a sample (P‐AN 20) is 1.07 × 10^?5 S cm^?1 at room temperature and 2.79 × 10^?4 S cm^?1 at 80 °C, thus presenting the potential to meet the practical requirement of lithium ion batteries for polymer electrolytes. Copyright © 2005 Society of Chemical Industry