Attributes of packaging and influences on waste

An important area of focus for the reduction of domestic waste is packaging and food packaging specifically. At some point in the life of packaging in the consumers' home, the packaging goes through a transition from something of use, of value and of worth to the consumer to something that is no longer any of these. Being able to indentify attributes of packaging that might have an impact on this transitional point to change the use or value so that the packaging is re‐used, recycled or composted rather than being landfilled is very important in successfully diverting packaging waste from landfill. This research aimed to conduct a variety of tests to indentify attributes of packaging that have an influence on the eventual waste route and to determine what that influence was. The research included an extensive literature study looking at consumer test methods, current waste and packaging waste studies, and packaging design literature. This was followed by a series of four tests: ‘bin raids’, ‘digital diary’, ‘visual survey’ and ‘ethnography’. These tests were designed to determine how consumers would treat specific examples of packaging in an end‐of‐life scenario and what influences those decisions. Copyright © 2011 John Wiley & Sons, Ltd.     

现代消费心理对包装设计的影响作用

根据消费者各种心理活动、特征 ,论述了消费心理现象在包装设计中的作用及对商品包装的销售影响     

Mechanical and thermal behaviour of flexible food packaging polymeric films materials under high pressure/temperature treatments

The effect of high‐pressure processing on mechanical and thermal properties of four complex packaging materials (polyethylene/ethylene vinyl alcohol/ polyethylene: PE/EVOH/PE; metallized polyester/polyethylene: PETmet/PE; polyester/polyethylene: PET/PE; polypropylene SiOx recovered: PPSiOx) was studied. Pouches of the different materials containing distilled water or olive oil as food simulants, as well as empty ones, were subjected to 400 MPa for 30 min, at temperatures of 20 or 60°C. Delamination and wrinkling were a general consequence of the high‐pressure processing of multilayer polymeric systems. However, no significant changes were observed regarding the mechanical properties of PE containing laminates after pressurization. PPSiOx underwent significant modifications as SiOx completely broke down. Neither thermal property was affected by pressure, as it was the processing temperature that induced tempering effects on the crystallization behaviour of polymeric components. Only PE/EVOH/PE, when in contact with water as a simulant, presented a decrease in the melting point temperature. Copyright © 2008 John Wiley & Sons, Ltd.     

Thermal behaviour of ESP ash from municipal solid waste incinerators

Stricter environmental regulations demand safer treatment and disposal of incinerator fly ashes. So far no sound technology or a process is available for a sustainable and ecological treatment of the waste incineration ashes, and only partial treatment is practised for temporary and short-term solutions. New processes and technology need to be developed for comprehensive utilization and detoxification of the municipal solid waste (MSW) incinerator residues. To explore the efficiency of thermal stabilisation and controlled vitrification, the thermal behaviour of electrostatic precipitator (ESP) ash was investigated under controlled conditions. The reaction stages are identified with the initial moisture removal, volatilisation, melting and slag formation. At the temperature higher than 1100 °C, the ESP ashes have a quicker weight loss, and the total weight loss reaches up to 52%, higher than the boiler ash. At 1400 °C a salt layer and a homogeneous glassy slag were formed. The effect of thermal treatment on the leaching characteristics of various elements in the ESP ash was evaluated with the availability-leaching test. The leaching values of the vitrified slag are significantly lowered than that of the original ash.     

Influence of chromium diffusion and different surface finishes on the oxidation behaviour of chromium steels

Abstract

The present contribution is focused on the systematic investigation of the effects of different surface finishes (ground, polished, electropolished) on the oxidation behaviour of chromium steels. The specimens were oxidized in a H2–2.5%H₂O atmosphere at 872 K for 1 h to 100 h. Depth profiles were recorded by secondary neutral mass spectrometry (SNMS) to determine the elemental composition of the oxide scale and the diffusion profiles below the scale. The surface finish was found to influence both the thickness of the oxide scale and the depletion of the selectively oxidized elements.     

Influence of directionality on strength and impact behaviour of high strength steels

Abstract

The directionality of the strength and impact behaviour of control rolled 110 grade high strength steel has been examined. Tensile specimens tested along the rolling direction were found to give strengths of ～60 MPa lower than when tested transversely in the rolling direction. Charpy V notch impact samples, in contrast, gave lower impact transition temperatures when taken in the rolling direction (35°C lower). The difference in strength between the two directions is believed to be mainly as a result of the strong texture produced on control rolling. The difference in impact behaviour is due to the more severe fissuring on the fracture surface of the longitudinally tested specimens. Fissuring is more marked on the longitudinally tested sample because of the greater grain elongation in that direction, the initial fracture path being along the grain boundaries.     

Influence of nano-particle size on the oxidation behaviour of Al,Fe and Cu

Abstract

The addition of ultra-fine and nano-sized particles in composite materials influences their properties. In order to understand the influence of the nano-size of metal particles on the oxidation behaviour, a series of in situ studies by thermogravimetry (TG) and high temperature X-ray diffraction (XRD) was performed on Al, Fe and Cu during heating with post oxidation analysis by field emission – scanning electron microscope (FE-SEM). The oxidation reaction depends, for all three studied metals, on the particle size both in regard to transient oxide formation and formation temperatures. On a nano-scale Al forms θ-Al₂O₃ and γ-Al₂O₃ simultaneously at 500°C, but both of these oxides transform to α-Al₂O₃ at 975°C producing nano-scaled oxide particles. Aluminium particles with sizes from 2 to 25 μm form α-Al₂O₃ only, starting at temperatures close to the melting point. Nano-sized Fe forms on heating from 340°C α-Fe₂O₃ only and no other oxides. On nano-sized Cu particles the formation of Cu₂O starts at 140°C, transforming completely to CuO at 300°C.     

Analysing creative behaviour in the later stage design process

Creativity is widely seen as an important subject in the study of the engineering design process. This paper presents a framework and coding scheme for the analysis of creative designer behaviour within the later stage engineering design process, validated through a longitudinal study. By classifying the tasks that designers complete throughout the design process, analysis has demonstrated two different approaches to creative behaviour in later stage design; dependent on the way in which designers identify, develop and use knowledge and design variables. Through such analysis, the understanding required to develop specific and particularly appropriate methods of designer support can be gained, dependent on the stage of the design process and particular approach of the designer.     

Influence of the microstructure on the plastic behaviour of duplex stainless steels

Microstructure change of α (ferrite) + γ (austenite) two-phase structure in duplex stainless steels deformed by hot torsion tests is briefly analyzed. Two types of stainless steels containing different volume fractions of ferrite and austenite were torsion deformed at temperatures ranging from 900 to 1250 °C. Steel A (25.5Cr-4.9Ni-1.6Mo) contained Cr_eq/Ni_eq = 4.8 and steel B (22.2Cr-5.6Ni-3Mo) contained Cr_eq/Ni_eq = 3.5 bring about different microstructures and flow stress behaviour. The results show that the shape of the flow stress curves depends on the material and on deformation conditions. Four different flow curve shapes were observed. At high temperatures, steel A displayed a plastic behaviour typical of ferritic stainless steels. As the deformation temperature decreased, the flow curves presented peak stresses at low-temperature deformation. When the austenite particles are distributed coarsely in the matrix (steel B), the plastic flow curve displays a stress peak separating extensive regions of hardening and softening. When both phases have the same volume fractions, the microstructure is characterized by percolation of the two phases in the samples, and the plastic flow curve takes on a very distinctive shape in hot torsion tests. The role of the microstructure present during deformation on the shape of the flow stress curves is analyzed.     

绘画与包装设计

美术属社会意识范畴,与美的创造有关的艺术门类,又称“造型艺术”、“视觉艺术”,通常包括绘画、雕塑、建筑和工艺美术。绘画作为造型艺术之一,与视觉设计艺术具有密切的联系,在设计基础教育中,对培养提高设计人员的艺术素养和表现能力有着重要意义。     

Sustainable packaging design: a holistic methodology for packaging design

This study describes a holistic methodology for sustainable packaging design. This methodology studies the combined systems of packaging and the packaged products across the whole distribution chain from manufacturer to end consumer and the life cycle from raw material extraction to the waste phase. It contains a number of indicators that are grouped into the following main categories: environmental sustainability, distribution costs, product protection, market acceptance and user friendliness. The methodology integrates a number of different analytical methods. It is intended to be used in packaging design and optimisation, for idea generation, decision support and as documentation of properties of existing packaging systems. The study describes experiences with the methodology from one case study in the Norwegian Food Industry. The experiences show that the methodology is very comprehensive, and gives a good overview of the properties of a packaging solution. It enables quantitative comparisons between different packaging solutions throughout the design process. The methodology reduces the risk of implementing sub‐optimal packaging solutions. An additional benefit of the methodology is gained by working in cross‐functional teams. One potential drawback is that the methodology can be resource and data intensive. The methodology can be used as a tool box in packaging design, i.e. it is not necessary to use all methods and quantify all indicators to gain benefit. However, all indicators and requirements should be evaluated and considered. In all cases, it should be considered to include additional indicators if important sustainability issues have not been addressed. Copyright © 2010 John Wiley & Sons, Ltd.     

Design for volume optimization of packaging for durable goods

In the literature, there are several authors arguing for the optimization of the packaging volume as an important factor in distribution efficiency. Within the context of packaging of durable goods, these authors present significant economic savings, usually illustrated by qualitative examples of redesigns. So far, these papers are limited to: (a) the economic aspect of volume (b) packaging for which the main functionality is distribution‐related, and (c) mostly qualitative empirical data. This current paper aims to contribute to this literature by: (a) arguing that volume is also a significant factor from an environmental perspective (b) including packaging for which the main functionality is marketing‐related, and (c) presenting quantitative data of over 1000 packed durable goods, covering consumer electronics, domestic appliances, toys, power tools and furniture. Several strategies for volume optimization are discussed in relation to different packaging functionalities. Copyright © 2011 John Wiley & Sons, Ltd.     

Investigating customer perceptions of refillable packaging and assessing business drivers and barriers to their use

A collaborative UK government‐funded research project drawing on the design and sustainability expertise of the Department of Design and Technology at Loughborough University and the sustainability and product bank functions at The Boots Company set out to investigate the potential that refillable packaging systems can offer the consumer and the environment. In the past, refills have generally been categorized under one general heading and often branded as a failure. However, early in the project, the team identified that by taking a creative approach to interpreting refills, there are actually a wide range of different types of refills that can be differentiated with respect to their delivery approach and level of consumer/business interaction. Once these had been identified, collated and categorized, the team set out to investigate the consumer perceptions, and the business barriers and drivers found to influence the adoption and success of a number of different types of refillable packaging. This paper reports on those findings. It concludes that differentiating between refill types holds the key to developing more suitable and more successful refillable packaging systems as positive and negative attributes can be more accurately identified and responded to. Copyright © 2009 John Wiley & Sons, Ltd.     

绿色设计与绿色包装

1、时代呼唤绿色设计当人类社会在经历了工业革命之后,进入大工业社会时代,工业化所带来的物质成就及其对人类自身的生存状态和生活方式的作用是过去任何时代所不能比拟的。现代科学技术在给人类带来充裕的物质财富的同时,也对与我们人类的生存息息相关的生态环境造成了巨大的破坏。人类遭受到前所未有的生态危机、环境危机、能源危机,大自然正频繁地报复着人     

绿色包装设计模式的解析

论述了绿色包装设计对于人与自然的生态平衡关系,以及如何提高其产品在国内外的市场竞争力.促使人们重新面对一个基本问题:市场需求什么样的产品包装,如何设计这些产品包装.基于可持续发展的战略思想,提出了探索新的包装设计模式,传达绿色资讯,引导绿色消费.     

Compressive and tensile behaviour of aluminum foams

The uniaxial compressive and tensile modulus and strength of several aluminum foams are compared with models for cellular solids. The open cell foam is well described by the model. The closed cell foams have moduli and strengths that fall well below the expected values. The reduced values are the result of defects in the cellular microstructure which cause bending rather than stretching of the cell walls. Measurement and modelling of the curvature and corrugations in the cell walls suggests that these two features account for most of the reduction in properties in closed cell foams.     

An application of the theory of planned behaviour to truck driving behaviour and compliance with regulations

A questionnaire study was conducted with truck drivers to help understand driving and compliance behaviour using the theory of planned behaviour (TPB). Path analysis examined the ability of the TPB to explain the direct and indirect factors involved in self-reported driving behaviour and regulation compliance. Law abiding driving behaviour in trucks was related more to attitudes, subjective norms and intentions than perceived behavioural control. For compliance with UK truck regulations, perceived behavioural control had the largest direct effect. The differing results of the path analyses for driving behaviour and compliance behaviour suggest that any future interventions that may be targeted at improving either on-road behaviour or compliance with regulations would require different approaches.     

包装设计的性别之分

产品包装由于直接面对消费者,因而带有强烈的个性色彩,性别差异偏好是个性化消费的一个重要方面.不同性别类型的人群对产品包装消费具有不同的需求,对于包装的外观形态要素进行分析、考量,进而对包装设计要素进行考量,找到各要素之间的对应关系,无疑对包装设计具有重要的指导意义.