Fault-tolerant control for a class of hybrid systems with uncontrollable switching

This article focuses on the fault-tolerant control (FTC) problem for a class of hybrid systems modelled by hybrid automata. An observer-based FTC framework is proposed for the hybrid system with uncontrollable state-dependent switching and without full continuous state measurements. Two kinds of faults are considered: continuous faults that affect each mode and discrete faults that affect the mode transition. Sufficient conditions are given such that the hybrid system can be stabilised in the sense of LaSalle invariance principle. Simulation results of example of CPU processing control show the efficiency of the proposed method.     

A fault tolerant control framework for periodic switched non-linear systems

An observer-based fault tolerant control (FTC) framework is proposed for a class of periodic switched non-linear systems (PSNS) without full state measurements. Two kinds of faults are considered: continuous faults that affect each mode during its dwell period; and discrete faults that affect the switching sequence. Under the average dwell time scheme, the proposed FTC framework can maintain the stability of overall PSNS in spite of these two kinds of fault. A switched reluctance motor example is taken to illustrate the efficiency of the proposed method.     

Results and perspectives on fault tolerant control for a class of hybrid systems

This article addresses the fault tolerant control (FTC) issue for a class of hybrid systems (HS) modelled by hybrid automata. Two kinds of faults are considered: continuous fault that affects each continuous system mode; discrete fault that affects the switching conditions. In these two faulty cases, the FTC design has two main objectives: (1) maintain the continuous performances including various stabilities of the origin and the output tracking/regulation behaviours along the trajectories of HS; (2) maintain the discrete specifications that have to be followed by HS, e.g. a desired switching sequence. The following three FTC methodologies are considered: FTC for HS with continuous stability goal; FTC for HS with discrete specifications; supervisory FTC design via hybrid control techniques. Some perspectives are also provided. This article provides the readers a survey on the main techniques that can be used to achieve these FTC goals of HS.     

Adaptive logic‐based switching fault‐tolerant controller design for nonlinear uncertain systems

This paper deals with the problem of fault‐tolerant control (FTC) for a class of nonlinear uncertain systems against actuator faults using adaptive logic‐based switching control method. The uncertainties under consideration are assumed to be dominated by a bounding system which is linear in growth in the unmeasurable states but can be a continuous function of the system output, with unknown growth rates. Several types of common actuator faults, e.g., bias, loss‐of‐effectiveness, stuck and hard‐over faults are integrated by a unified fault model. By utilizing a novel adaptive logic‐based switching control scheme, the actuator faults can be detected and automatically accommodated by switching from the stuck actuator to the healthy or even partly losing‐effectiveness one with bias, in the presence of large parametric uncertainty. In particular, two switching logics for updating the gain in the output feedback controllers are designed to ensure the global stability of the nominal (fault‐free) system and the boundedness of all closed‐loop signals of the faulty system, respectively. Two simulation examples of an aircraft wing model and a single‐link flexible‐joint robot are given to show the effectiveness of the proposed FTC controller. Copyright © 2010 John Wiley & Sons, Ltd.     

Robust Actuator‐Fault‐Tolerant Control System Based on Sliding‐Mode Observer for Thrust‐Vectoring Aircrafts

In this paper, a robust actuator‐fault‐tolerant control (FTC) system is proposed for thrust‐vectoring aircraft (TVA) control. To this end, a TVA model with actuator fault dynamics, disturbances, and uncertain aerodynamic parameters is described, and a local fault detection and identification (FDI) mechanism is proposed to locate and identify faults, which utilizes an adaptive sliding‐mode observer (SMO) to detect actuator faults and two SMOs to identify and estimate their parameters. Finally, a fault‐tolerant controller is designed to compensate for these actuator faults, disturbances, and uncertain aerodynamic parameters; the approach combines back‐stepping control with fault parameters and a high‐order SMO. Furthermore, the stability of the entire control system is validated, and simulation results are given to demonstrate the effectiveness and potential for this robust FTC system.     

Adaptive fault‐tolerant control for feedback linearizable systems with an aircraft application

This paper investigates fault‐tolerant control (FTC) for feedback linearizable systems (FLSs) and its applications. The dynamic effects caused by the actuator faults on the feedback linearized model are firstly analyzed, which reveals that under actuator faults, the control input in the linearized model is affected by uncertain terms. In the framework of model reference control, the first FTC strategy is proposed as a robust controller, which achieves asymptotic tracking control of the FLS under actuator faults. A disadvantage of this strategy is that it relies on explicit information about several parameters in the actuator faults. This requirement is later relaxed by combining the robust FTC strategy with an adaptive technique to generate the adaptive FTC law, which is then improved to alleviate possible chattering of the actuator and estimation drifting of the adaptive parameter. Finally, the proposed FTC strategies are evaluated by reference command tracking control of a pendulum and an air‐breathing hypersonic vehicle under actuator faults. Simulation results demonstrate good tracking performance, which confirms effectiveness of the proposed strategies. Copyright © 2014 John Wiley & Sons, Ltd.     

Control performance‐based fault detection and fault‐tolerant control schemes for a class of nonlinear systems

The objective of this paper is to develop performance‐based fault detection (FD) and fault‐tolerant control (FTC) schemes for a class of nonlinear systems. To this end, the representation forms of nonlinear systems with faults and the controller parameterization forms are studied first with the aid of the nonlinear factorization technique. Then, based on the stable kernel representation and the stable image representation of the faulty nonlinear system, the stability performance of the closed‐loop system is addressed, respectively. The so‐called fault‐tolerant margin is defined to evaluate the system fault‐tolerant ability. On this basis, two performance‐based FD schemes are developed aiming at detecting the system performance degradation caused by system faults. Furthermore, to recover the system stability performance, two performance‐based FTC strategies are proposed based on the information provided by the FD unit. In the end, a numerical example and a case study on the three‐tank system are given to demonstrate the proposed results.     

Fault‐tolerant control of singularly perturbed systems with actuator faults and disturbances

The article proposes several fault‐tolerant control (FTC) laws for singularly perturbed systems (SPS) with actuator faults and disturbances. One of the main challenges in this context is that the fast‐slow decomposition is not available for actuator faults and disturbances. In view of this, some conditions for the asymptotic stability of the closed‐loop dynamics are investigated by amending the composite Lyapunov approach. On top of this, a closed‐form expression of the upper bound of singular perturbation parameter (SPP) is provided. Moreover, we design several SPP‐independent composite FTC laws, which can be applied when this parameter is unknown. Finally, the chattering phenomenon is eliminated by using the continuous approximation technique. We also emphasize that, for linear SPSs, the FTC design can be formulated as a set of linear matrix inequalities, while the SPP upper bound can be obtained by solving a convex optimization problem. Two numerical examples are given to illustrate the effectiveness of the proposed methodology.     

A new unified input‐to‐state stability criterion for impulsive stochastic delay systems with Markovian switching

In this paper, the problems of the input‐to‐state stability (ISS), the integral input‐to‐state stability (iISS), the stochastic input‐to‐state stability (SISS) and the e^λt(λ>0)‐weighted input‐to‐state stability (e^λt‐ISS) are investigated for nonlinear time‐varying impulsive stochastic delay systems with Markovian switching. We propose one unified criterion for the stabilizing impulse and the destabilizing impulse to guarantee the ISS, iISS, SISS and e^λt‐ISS for such systems. We verify that when the upper bound of the average impulsive interval is given, the stabilizing impulsive effect can stabilize the systems without ISS. We also show that the destabilizing impulsive signal with a given lower bound of the average impulsive interval can preserve the ISS of the systems. In addition, one criterion for guaranteeing the ISS of nonlinear time‐varying stochastic hybrid systems under no impulsive effect is derived. Two examples including one coupled dynamic systems model subject to external random perturbation of the continuous input and impulsive input disturbances are provided to illustrate the effectiveness of the theoretic results developed.     

Integrated fault estimation and fault‐tolerant control for uncertain Lipschitz nonlinear systems

This paper proposes an integrated fault estimation and fault‐tolerant control (FTC) design for Lipschitz non‐linear systems subject to uncertainty, disturbance, and actuator/sensor faults. A non‐linear unknown input observer without rank requirement is developed to estimate the system state and fault simultaneously, and based on these estimates an adaptive sliding mode FTC system is constructed. The observer and controller gains are obtained together via H_∞ optimization with a single‐step linear matrix inequality (LMI) formulation so as to achieve overall optimal FTC system design. A single‐link manipulator example is given to illustrate the effectiveness of the proposed approach. Copyright © 2016 John Wiley & Sons, Ltd.     

Fault‐tolerant control synthesis for a class of nonlinear systems: Sum of squares optimization approach

This paper studies the fault‐tolerant control (FTC) problem for nonlinear systems, with guaranteed cost or H_∞ performance objective in the presence of actuator faults. The faulty mode is built as a multi‐model framework of the typical aberration in actuator effectiveness. The novelty of this paper is that the effect of the nonlinear terms is described as an index in order to transform the FTC design problem into a semi‐definite programming. The proposed optimization approach is to find zero optimum for this index. Combined with other performance indexes, the conceived multi‐objective optimization problem is solved by using sum of squares method in a reliable and efficient manner. Numerical examples are included to verify the applicability of this new approach for the nonlinear FTC synthesis. Copyright © 2008 John Wiley & Sons, Ltd.     

An impulsive‐switched‐system approach to aperiodic sampled‐data systems with time‐delay control

This paper devotes to the stability of aperiodic sampled‐data systems with time‐delay control, where the delays can impose a positive effect on the stability of the systems. The systems are modeled as impulsive switched systems with fixed switching laws. A novel separation theorem is presented to determine the Schur property of a matrix product and then used to obtain a less conservative stability criterion for the impulsive switched systems with fixed switching laws. By the separation theorem and a loop‐functional approach, some new stability and stabilization criteria for aperiodic sampled‐data systems with time‐delay control are provided in terms of linear matrix inequalities. Finally, the stability and stabilization results are tested on some classical numerical examples to illustrate the efficiency of the proposed method.     

Input‐to‐state stability of impulsive switched nonlinear time‐delay systems with two asynchronous switching phenomena

This summary addresses the input‐to‐state stability (ISS) and integral ISS (iISS) problems of impulsive switched nonlinear time‐delay systems (ISNTDSs) under two asynchronous switching effects. In our investigated systems, impulsive instants and switching instants do not necessarily coincide with each other. Meanwhile, systems switching signals are not simultaneous with the corresponding controllers switching signals, which will induce instability seriously, and cause many difficulties and challenges. By utilizing methods of Lyapunov‐Krasovskii and Lyapunov‐Razumikhin, mode‐dependent average dwell time approach, and mode‐dependent average impulsive interval technique, some stability criteria are presented for ISNTDSs under two asynchronous switching effects. Our proposed results improve the related existing results on the same topic by removing some restrictive conditions and cover some existing results as special cases. Finally, some simulation examples are presented to illustrate the effectiveness and advantages of our results.     

Adaptive fault‐tolerant control for a class of output‐constrained nonlinear systems

In this work, by incorporating a tan‐type barrier Lyapunov function into the Lyapunov function design, we present a novel adaptive fault‐tolerant control (FTC) scheme for a class of output‐constrained multi‐input single‐output nonlinear systems with actuator failures under the perturbation of both parametric and nonparametric system uncertainties. We show that under the proposed adaptive FTC scheme, exponential convergence of the output tracking error into a small set around zero is guaranteed, while the constraint requirement on the system output will not be violated during operation. In the end, two illustrative examples are presented to demonstrate the effectiveness of the proposed FTC scheme. Copyright © 2015 John Wiley & Sons, Ltd.     

Input/output‐to‐state stability of impulsive switched delay systems

This paper investigates the input/output‐to‐state stability (IOSS) and integral IOSS (iIOSS) of nonlinear impulsive switched delay systems where the switching moments and impulsive moments do not necessarily coincide with each other. Some Razumikhin‐type criteria are presented to guarantee the IOSS and iIOSS of the systems, where both destabilizing and stabilizing effects of switching behavior and impulses are considered simultaneously. The counterpart results for impulsive switched systems without delay can be naturally obtained. Several examples are provided to verify the effectiveness and superiority of the proposed results.     

Fault detection model‐based controller for process systems

This paper develops a model‐based control system for fault detection and controller reconfiguration using stochastic model predictive control (MPC). The system can determine online the optimal control actions, detect faults quickly, and reconfigure the controller accordingly. Such a system can perform its function correctly in the presence of internal faults. A fault detection model based (FDMB) controller consists of two main parts: the first is fault detection and diagnosis (FDD) and the second is controller reconfiguration (CR). Systems subject to such abrupt failures are modeled as stochastic hybrid systems with variable‐structure. This paper deals with three challenging issues: design of the fault‐model set; estimation of hybrid multiple models; and stochastic MPC of hybrid multiple models. For the first issue, we propose a simple scheme for designing a fault model set based on random variables. For the second issue, we consider and select a fast and reliable FDD system applied to the above model set. Finally, we develop a stochastic MPC scheme for multiple model CR with soft switching signals based on the weighted probabilities of the outputs of different models. Simulations for the proposed FDMB controller are illustrated and analyzed. Copyright © 2011 John Wiley and Sons Asia Pte Ltd and Chinese Automatic Control Society     

Hybrid‐impulsive second‐order sliding mode control: Lyapunov approach

Dynamic system of relative degree two controlled by discontinuous‐hybrid‐impulsive feedback in the presence of bounded perturbations is considered. The state feedback impulsive‐twisting control exhibits a uniform exact finite time convergence to the second‐order sliding mode with zero convergence time. The output feedback discontinuous control augmented by a simplified hybrid‐impulsive functions provides uniform exact convergence with zero convergence time of the system's states to a real second‐order sliding mode in the presence of bounded perturbations. Only ‘snap’ knowledge of the output derivative, that is, the knowledge of the output derivative in isolated time instants, is required. The output feedback hybrid‐impulsive control with practically implemented impulsive actions asymptotically drives the system's states to the origin. The Lyapunov analysis of the considered hybrid‐impulsive‐discontinuous system proves the system's stability. The efficacy of the proposed control technique is illustrated via computer simulations. Copyright © 2016 John Wiley & Sons, Ltd.     

Fault detection and isolation for nonlinear systems via high‐order‐sliding‐mode multiple‐observer

In this paper, fault detection and isolation problems are studied for a certain class of nonlinear systems. Under some structural conditions, multiple high‐order sliding‐mode observers are proposed. The value of the equivalent output injection is used for detecting faults and the multiple‐model approach for isolating particular faults in the system. The proposed method provides fast detection and isolation of actuator and plant faults. Simulation results support the proposed approach. Copyright © 2014 John Wiley & Sons, Ltd.     

Adaptive fault tolerant control for a class of input and state constrained MIMO nonlinear systems

In this work, we present a novel adaptive fault tolerant control (FTC) scheme for a class of control input and system state constrained multi‐input multi‐output (MIMO) nonlinear systems with both multiplicative and additive actuator faults. The input constraints can be asymmetric, and the state constraints can be time‐varying. A novel tan‐type time‐varying Barrier Lyapunov Function (BLF) is proposed to deal with the state constraints, and an auxiliary system is designed to analyze the effect of the input constraints. We show that under the proposed adaptive FTC scheme, exponential convergence of the output tracking error into a small neighbourhood of zero is guaranteed, while the constraints on the system state will not be violated during operation. Estimation errors for actuator faults are bounded in the closed loop. An illustrative example on a two degree‐of‐freedom robotic manipulator is presented to demonstrate the effectiveness of the proposed FTC scheme. Copyright © 2015 John Wiley & Sons, Ltd.