Phase Relations in the System Al2O3–B2O3–Nd2O3

The phase relations at a temperature below "subsolidus" in the system Al₂O₃–B₂O₃–Nd₂O₃ are reported. Specimens were prepared from various compositions of Al₂O₃, B₂O₃, and Nd₂O₃ of purity 99.5%, 99.99%, and 99.9%, respectively, and fired at 1100°C. There are six binary compounds and one ternary compound in this system. The ternary compound, NdAl₃(BO₃)₄ (NAB), has a phase transition at 950°C ± 15°C. The high-temperature form of NAB has a second harmonic generation (SHG) efficiency of KH₂PO₄ (KDP) of the order of magnitude of the form which has been used as a good self-activated laser material, and the low-temperature form of NAB has no SHG efficiency.     

Effect of Molybdenum on the Structure and on the Crystallization of SiO2–Na2O–CaO–B2O3 Glasses

Crystallization of the poorly durable Na₂MoO₄ phase able to incorporate radioactive cesium must be avoided in SiO₂–Al₂O₃–B₂O₃–Na₂O–CaO glasses developed for the immobilization of Mo-rich nuclear wastes. Increasing amounts of B₂O₃ and MoO₃ were added to a SiO₂–Na₂O–CaO glass, and crystallization tendency was studied. Na₂MoO₄ crystallization tendency decreased with the increase of B₂O₃ concentration whereas the tendency of CaMoO₄ to crystallize increased due to preferential charge compensation of BO₄⁻ entities by Na⁺ ions. ²⁹Si MAS NMR showed that molybdenum acts as a reticulating agent in glass structure. Trivalent actinides surrogate (Nd³⁺) were shown to enter into CaMoO₄ crystals formed in glasses.     

Spectroscopic Properties of Er3+-Doped Na2O–La2O3–Al2O3–SiO2 Glasses

Er³⁺-doped sodium lanthanum aluminosilicate glasses with compositions of (90− x )(0.7SiO₂·0.3Al₂O₃)· x Na₂O·8.2La₂O₃· 0.6Er₂O₃·0.2Yb₂O₃·1Sb₂O₃ (in mol%) ( x = 12, 20, 24, 40, 60 mol%) were prepared and their spectroscopic properties were investigated. Judd–Ofelt analysis was used to calculate spectroscopic properties of all glasses. The Judd–Ofelt intensity parameter Ω _t ( t = 2, 4, 6) decreases with increasing Na₂O. Ω₂ decreases rapidly with increasing Na₂O while Ω₄ and Ω₆ decrease slowly. Both the fluorescent lifetime and the radiative transition rate increase with increasing Na₂O. Fluorescence spectra of the ⁴ I _13/2 to ⁴ I _15/2 transition have been measured and the change with Na₂O content is discussed. It is found that the full width at half-maximum decreases with increasing Na₂O.     

Crystallization of (Na2O–MgO)–CaO–Al2O3–SiO2 Glassy Systems Formulated from Waste Products

Aluminosilicate and silicate glass-ceramics were obtained from controlled devitrification of CaO–Al₂O₃–SiO₂ glassy systems starting from Spanish and Italian coal fly ash or Italian municipal incinerator slag mixed with other byproducts, such as glass cullet and dolomite. The nucleation mechanism and the crystallization kinetics were investigated by thermal, diffractometric, and microstructural measurements. Moreover, the experimentally observed devitrification and the identification of the crystalline phases formed were compared with the indications derived from Ginsberg, Raschin-Tschetveritkov, and Lebedeva diagrams used for petrological glass-ceramics. All the glasses showed a good crystallization tendency with the formation of dendritic pyroxene and acicular wollastonite together with feldspar and iron spinels starting from the surface. The activation energy values for crystallization ranging from 472 to 832 kJ ·mol⁻¹ were found to be close to those typical for aluminosilicate glasses; moreover, the possibility to vitrify and devitrify up to 100 wt% of slag and up to 40–50 wt% of ash mixed with glass cullet and dolomite makes the vitrification treatment a suitable disposal procedure.     

Sintering and Crystallization of CaO–Al2O3–ZrO2–SiO2 Glasses Containing Different Amount of Al2O3

In this work several complementary techniques have been employed to carefully characterize the sintering and crystallization behavior of CaO–Al₂O₃–ZrO₂–SiO₂ glass powder compacts after different heat treatments. The research started from a new base glass 33.69 CaO–1.00 Al₂O₃–7.68 ZrO₂–55.43SiO₂ (mol%) to which 5 and 10 mol% Al₂O₃ were added. The glasses with higher amounts of alumina sintered at higher temperatures (953°C [lower amount] vs. 987°C [higher amount]). A combination of the linear shrinkage and viscosity data allowed to easily find the viscosity values corresponding to the beginning and the end of the sintering process. Anorthite and wollastonite crystals formed in the sintered samples, especially at lower temperatures. At higher temperatures, a new crystalline phase containing ZrO₂ (2CaO·4SiO₂·ZrO₂) appeared in all studied specimens.     

Crystalline Phases and YAG Laser-Induced Crystallization in Sm2O3–Bi2O3–B2O3 Glasses

The glass formation region, crystalline phases, second harmonic (SH) generation, and Nd:yttrium aluminum garnet (YAG) laser-induced crystallization in the Sm₂O₃–Bi₂O₃–B₂O₃ system were clarified. The crystalline phases of Bi₄B₂O₉, Bi₃B₅O₁₂, BiBO₃, Sm _x Bi_{1− x} BO₃, and SmB₃O₆ were formed through the usual crystallization in an electric furnace. The crystallized glasses consisting of BiBO₃ and Sm _x Bi_{1− x} BO₃ showed SH generations. The formation of the nonlinear optical BiB₃O₆ phase was not confirmed. The formation (writing) region of crystal lines consisting of Sm _x Bi_{1− x} BO₃ by YAG laser irradiation was determined, in which Sm₂O₃ contents were∼10 mol%. The present study demonstrates that Sm₂O₃–Bi₂O₃–B₂O₃ glasses are promising materials for optical functional applications.     

Quaternary System Al2O3–CaO–MgO–SiO2: I, Study of the Crystallization Volume of Al2O3

Compatibility relations of Al₂O₃ in the quaternary system Al₂O₃–CaO–MgO–SiO₂ were studied by firing and quenching followed by microstructural and energy-dispersive X-ray examination. A projection of the liquidus surface of the primary phase volume of Al₂O₃ was constructed in terms of the CaO, SiO₂, and MgO contents of the mixtures recalculated to 100 wt%. Two invariant points, where four solids coexist with a liquid phase, were defined, and the positions of the isotherms were tentatively established. The effect of SiO₂, MgO, and CaO impurities on Al₂O₃ growth also was studied.     

Structure, Thermal Behavior, Chemical Durability, and Optical Properties of the Na2O–Al2O3–TiO2–Nb2O5–P2O5 Glass System

The FTIR, Raman, UV-Vis, ³¹P MAS-NMR, DTA, and refractive index measurements have been combined to investigate a series of glasses with the general formula 20Na₂O–5Al₂O₃− x TiO₂–(45− x )Nb₂O₅–30P₂O₅, 15≤ x ≤45. The glass structure, as well as thermal, optical, and chemical durability properties, were then described as functions of the f _Nb/ f _Ti ratio. An increase of the f _Nb/ f _Ti ratio correlates with a decrease in length of the average phosphate chains linked through Nb–O–P and Ti–O–P bonds, with an increase in the glass stability and with increase in the linear refractive indices at 632.8 nm from 1.79 to 1.89. Furthermore, niobium is more effective than titanium in improving chemical durability.     

Mullite-Type Structures in the Systems Al2O3–Me2O (Me = Na, K) and Al2O3–B2O3

A morphous solids belonging to the systems Al₂O₃–Me₂O (Me = Na, K) and Al₂O₃–B₂O₃ were prepared by nitrate decomposition, introducing boron in the form of boric acid. Crystalline metastable solids with pseudotetragonal symmetry were obtained from thermal treatment at 850° to 900°C for the compositions Al₆Me_xO_{(9+0.5 x )} ( x ≅ 1; Me = Na, K) and Al_{6- x} B _x O₉ (1 x 3). The resultant solids were stable only within a difinite temperature range and transformed, with further treatment increases, into stable equilibrium phases. The structures of the metastable phases were examined by X-ray diffraction and Fourier transform infrared spectroscopy, and both analyses showed a mullite type of framework, inside of which the atomic coordinates were refined in the Pbam (no. 55) space group. The present results indicate that these silica-free mullite structures are stabilized by two different mechanisms: (1) interstitial occupation of bulky cations (Na⁺, K⁺) or (2) substitution of B for Al in some of the tetrahedral positions.     

Subsolidus Phase Relationships in the Ga2O3–Al2O3–TiO2 System

Subsolidus phase relationships in the Ga₂O₃–Al₂O₃–TiO₂ system at 1400°C were studied using X-ray diffraction. Phases present in the pseudoternary system include TiO₂ (rutile), Ga_{2−2 x} Al_{2 x} O₃ ( x ≤0.78 β-gallia structure), Al_{2−2 y} Ga_{2 y} O₃ ( y ≤0.12 corundum structure), Ga_{2−2 x} Al_{2 x} TiO₅ (0≤ x ≤1 pseudobrookite structure), and several β-gallia rutile intergrowths that can be expressed as Ga_{4−4 x} Al_{4 x} Ti _{n −4}O_{2 n −2} ( x ≤0.3, 15≤ n ≤33). This study showed no evidence to confirm that aluminum substitution of gallium stabilizes the n =7 β-gallia–rutile intergrowth as has been mentioned in previous work.     

Structure and Properties of Low Phonon Antimony Glasses in the K2O–B2O3–Sb2O3–ZnO System

The monolithic glass-forming region of the low phonon and low softening point antimony glasses containing high Sb₂O₃ (40–75 mol%) in the novel quaternary K₂O–B₂O₃–Sb₂O₃–ZnO system has been found with the help of X-ray diffraction (XRD) analysis. The structure of a series of glasses with the general composition of (mol%) 15K₂O–15B₂O₃–(70− x )Sb₂O₃– x ZnO (where x =5–25) has been evaluated by infrared reflection spectral (FT-IRRS) analyses. All the glasses are found to possess a low phonon energy of around 600 cm⁻¹, as revealed by FT-IRRS. Their softening point ( T _s), glass transition temperature ( T _g), and coefficient of thermal expansion (CTE) have been found to vary in the ranges of 351°–379°C, 252°–273°C, and 195–218 × 10⁻⁷ K⁻¹, respectively. These properties are found to be controlled by their fundamental property, like the covalent character of the glasses, which is found to increase with an increase in Sb₂O₃ content. In addition, the devitrified glasses have been characterized by XRD and field emission scanning electron microscopy, which manifests the presence of nanozinc antimony oxide crystals with sizes of 21–43 nm. The exhibited properties have revealed that they are a new class of versatile materials.     

Studies in the System Li2O–Al2O3–Fe2O3-H2O

Subsolidus equilibrium relations in a portion of the system Li2O-Fe₂O₃-Al₂O3 in the temperature range 500° to 1400°C. have been determined near po₂ = 0.21. Of particular interest in this system is the LiFe₅O₈-LiAl₅O₈ join, which shows complete solid solution above 1180°C. Below this temperature the solid solution exsolves into two spinel phases. At 600°C. approximately 15 mole % of each compound is soluble in the other. The high-temperature solid solution and the low-temperature exsolution dome extend into the ternary system from the 1:5 join. There is no appreciable crystalline solubility of LiFeO₂ or of α-Fe₂O₃ in LiFe₅O₈. An attempt to confirm HFe₅O₈ as the correct formulation of the magnetic ferric oxide "γ-Fe₂O₃" was inconclusive, but in the absence of positive evidence, the retention of γ-Fe₂O₃ is recommended. All the metallic oxides of the Group IV elements increase the temperature of the monotropic conversion of -γ-Fe₂O₃ to α-Fe₂O₃. Silica and thoria have a greater effect on this conversion than does titania or zirconia.     

Effect of Alkali Metal Oxide Addition on the Sinterability of MgO–B2O3–Al2O3 Glass–Al2O3 Filler Composites

The sintering of a composite of MgO–B₂O₃–Al₂O₃ glass and Al₂O₃ filler is terminated due to the crystallization of Al₄B₂O₉ in the glass. The densification of a composite of MgO–B₂O₃–Al₂O₃ glass and Al₂O₃ filler using pressureless sintering was accomplished by lowering the sintering temperature of the composite. The sintering temperature was lowered by the addition of small amounts of alkali metal oxides to the MgO–B₂O₃–Al₂O₃ glass system. The resultant composite has a four-point bending strength of 280 MPa, a coefficient of thermal expansion (RT—200°C) of 4.4 × 10⁻⁶ K⁻¹, a dielectric constant of 6.0 at 1 MHz, porosity of approximately 1%, and moisture resistance.     

Dielectric Properties of Glasses in the System Nb2O5–Na2O–SiO2

The effect of niobia on the dielectric properties of glasses in the system Nb₂O₅–Na₂O–SiO₂ has been studied from 100 to 10¹⁰ cps. The dielectric constant is high even at frequencies up to 10¹⁰ cps. The Nb⁵⁺ ion, with its small ionic radius and high charge, reinforces the network and raises the dielectric constant.     

Glass Formation and Recrystallization in the Lithium Metasilicate Region of the System Li2O–Al2O3–SiO2

The stability of the vitreous state in the lithium metasilicate region of the system Li₂O–Al₂O₃–SiO₂ was found to be a function of the concentration of lithia. The higher the lithia content, the less stable was the glass. The devitrification of glasses in this system was studied. In addition to the phases present at or near the liquidus, it was found that the β -eucryptite– β -quartz solid solution phase was metastable over most of the region. The Li₂O–SiO₂, β -Li₂O–Al₂O₃–4SiO₂ solid solution, β -Li₂O–Al₂O₃–2SiO₂ solid solution triple point was estimated to be near 62.5% SiO₂, 17% Al₂O₃, and 20.5% Li₂O (by weight). The thermal expansions of bodies in this region were measured and the values obtained are explained in terms of the phases present.     

Studies in Lithium Oxide Systems: XI, Li2O–B2O3–P2O5

The glassforming region in the system was roughly outlined and liquidus data were obtained for the three joins LiPO₃-BPO₄, Li₄P₂O₇-BPO₄, and Li₃PO₄-Li₂B₄O₇. Compatibility relations for the ternary subsystems Li₄P₂O₇-BPO₄-P₂O₅ and Li₂O-Li₃PO₄-Li₂B₈O₁₃ were established. Two ternary compounds with the probable compositions 22Li₂O - 11B₂O₃ - 13P₂O₅ and 2Li₂O 3B₂O₃ P₂O₅ were detected.     

Reactions in the System Li2O–MgO–Al2O3–SiO2: I, The Cordierite-Spodumene Join

Phase equilibria along the nonbinary join between cordierite (2MgO · 2Al₂O₃· 5SiO₂) and spodumene (Li₂O · Al₂O₃· 4SiO₂) were investigated in the temperature range 800° to 1550°C. using the quench technique on fourteen compositions. The phase diagram at high temperatures is characterized by a very small region of solid solution on the cordierite side, appreciable solid solution on the spodumene side, and regions of three and four phases toward the center of the system, including liquid, α-cordierite, mullite, spinel, corundum, and β-spodumene and its solid solutions. The liquidus has a flat minimum between 40 and 50% cordierite at 1347°, and rises on one side to the congruent melting point of β-spodumene (1421°) and on the other side to the temperature of complete melting of cordierite (1530°). The lowest temperature at which liquid appears is 1325°. At low temperatures a complete series of metastable solid solutions exists between μ-cordierite and β-spodumene. The significance of the data in the preparation of thermal-shock-resisting bodies is discussed.