Mechanically activated starch magnetic microspheres for Cd(Ⅱ) adsorption from aqueous solution

Magnetic starch microspheres(AAM-MSM) were synthesized via an inverse emulsion graft copolymerization by using mechanically activated cassava starch(MS) as a crude material, acrylic acid(AA) and acrylamide(AM) as graft copolymer monomers, and methyl methacrylate(MMA) as the dispersing agent and used as an adsorbent for the removal of Cd(II) ions from aqueous solution. Fourier-transform infrared spectroscopy(FT-IR), X-ray photoelectron spectroscopy(XPS), scanning electron microscopy(SEM), and vibrating sample magnetometry(VSM) were used to characterize the AAM-MSM adsorbent. The results indicated that AA, AM, and MMA were grafted to the MS, and the Fe_3 O_4 nanoparticles were encapsulated in the AAM-MSM adsorbent microspheres.The adsorbent exhibited a smooth surface, uniform size, and good sphericity because of the addition of the MMA and provided more adsorption sites for the Cd(II) ions. The maximum adsorption capacity of Cd(II) on the AAM-MSM was 39.98 mg·g~(-1). The adsorbents were superparamagnetic, and the saturation magnetization was 16.7 A·m~2·kg~(-1). Additionally, the adsorption isotherms and kinetics of the adsorption process were further investigated. The process of Cd(II) ions adsorbed onto the AAM-MSM could be described more favorably by the pseudo-second-order kinetic and Langmuir isothermal adsorption models, which suggested that the chemical reaction process dominated the adsorption process for the Cd(II) and chemisorption was the rate-controlling step during the Cd(II) removal process.     

Unravel the potential of zinc oxide nanoparticle-carbonized sawdust matrix for removal of lead(Ⅱ) ions from aqueous solution

Zinc oxide nanoparticles(ZnOnp) are molecular nanoparticles synthesized by a chemical precipitation method from zinc nitrate tetrahydrate and sodium hydroxide.Carbonized sawdust(CSD) was prepared from sawdust obtained from a local wood mill.The matrix of both provides a better material as an adsorbent.The present study applied the functionality of ZnOnp,CSD,and ZnOnp-CSD matrix as adsorbent materials for the removal of Pb(Ⅱ) ions from aqueous solution.The method of batch process was employed to investigate the potential of the adsorbents.The influence of pH,contact time,initial concentration of adsorbate,the dosage of adsorbents,and the temperature of adsorbate-adsorbent mixture on the adsorption capacity were revealed.The adsorption isotherm studies indicate that both Freundlich and Langmuir isotherms were suitable to express the experimental data obtained with theoretical maximum adsorption capacities(q_m) of 70.42,87.72,and 92.59 mg·g~(-1) for the adsorption of Pb(Ⅱ) ions onto ZnOnp,CSD,and ZnOnp-CSD matrix,respectively.The separation factors(R_L) calculated showed that the use of the adsorbents for the removal of Pb(Ⅱ) ions is a feasible process with R_L 1.The thermodynamic parameters obtained revealed that the processes are endothermic,feasible,and spontaneous in nature at 25-50℃.Evaluation of the kinetic model elected that the processes agreed better with pseudo-second order where the values of rate constant(k_2) obtained for the adsorption of Pb(Ⅱ) ions onto ZnOnp,CSD,and ZnOnp-CSD matrix are 0.00149,0.00188,and 0.00315 g·mg~(-1)·min~(-1),respectively.The reusability potential examined for four cycles indicated that the adsorbents have better potential and economic value of reuse and the ZnOnp-CSD matrix indicates improved adsorbent material to remove Pb(Ⅱ) ions from aqueous solution.     

Ghezeljeh nanoclay as a new natural adsorbent for the removal of copper and mercury ions:Equilibrium,kinetics and thermodynamics studies

Heavy metal determination was carried out by applying the solid phase extraction (SPE) method in batch mode followed by atomic absorption spectroscopy (AAS) and inductively coupled plasma atomic emission spectrosco-py (ICP-AES) from aqueous solutions using Ghezeljeh montmoril onite nanoclay as a new natural adsorbent. The Ghezeljeh clay is characterized by using Fourier Transform Infrared (FT-IR) Spectroscopy, Scanning Electron Mi-croscopy–Energy Dispersive Spectrometry (SEM–EDS) and X-ray Diffractometry (XRD) and X-ray Fluorescence (XRF). The results of XRD and FT-IR of nanoclay confirm that montmoril onite is the dominant mineral phase. Based on SEM images of Ghezeljeh clay, it can be seen that the distance between the plates is Nano. The effects of varying parameters such as initial concentration of metal ions, pH and type of buffer solutions, amount of ad-sorbent, contact time, and temperature on the adsorption process were examined. The effect of various interfer-ing ions was studied. The adsorption data correlated with Freundlich, Langmuir, Dubinin–Radushkevich (D–R), and Temkin isotherms. The Langmuir and Freundlich isotherms showed the best fit to the equilibrium data for Hg(I ), but the equilibrium nature of Cu(II) adsorption has been described by the Langmuir isotherm. The kinetic data were described with pseudo-first-order, pseudo-second-order and double-exponential models. The adsorp-tion process follows a pseudo-second-order reaction scheme. Calculation ofΔG0,ΔH0 andΔS0 showed that the nature of Hg(II) ion sorption onto the Ghezeljeh nanoclay was endothermic and was favored at higher temper-ature, and the nature of Cu(II) ion sorption was exothermic and was favored at lower temperature.     

菌丝体-甲壳素水处理剂对重金属离子吸附性能的研究

The adsorption properties of chitin adsorbent from mycelium of fermentation industries for the removal of heavy metal ions were studied.The result shows that the chitin adsorbent has high adsorption capacity for many heavy metal ions and Ni^2 in citric acid.The influence of pH was significant:When pH is higher than 4.0,the high adsorption capacity is obtained.otherwise H^ ion inhibits the adsorption of heavy metal ions.The comparison of the chitin adsorbent with some other commercial adsorbents was made,in which that the adsorption behavior of chitin adsorbent is close to that of commercial cation exchange adsorbents,and its cost is much lower than those commercial adsorbents.     

Removal of Cd（II） by Nanometer AIO（OH） Loaded on Fiberglass with Activated Carbon Fiber Felt as Carrier

A new nanometer material, nanometer AlO（OH） loaded on the fiberglass with activated carbon fibers felt（ACF） as the carrier, was prepared by hydrolytic reaction for the removal of Cd（II） from aqueous solution using column adsorption experiment. As was confirmed by XRD determination, the hydrolysis production loaded on fiberglass was similar to the orthorhombic phase AlO（OH）. SEM images showed that AlO（OH） particles were in the form of small aggregated clusters. The Thomas model was applied for estimating the kinetic parameters and the saturated adsorption ability of Cd（II） adsorption on the new adsorbent. The results showed that the maximum adsorption capacity of Cd（II） was 128.50 mg·g^-1 and 117.86 mg·g^-1 for the adsorbent mass of 0.3289 g and the adsorbent mass of 0.2867 g, respectively. The elution experiment result indicated that the adsorbed Cd ions was easily desorbed from the material with 0.1 mol·L^-1 HCl solution. Adsorption-desorption cycles showed the feasibility of repealed uses of the composited material. The adsorption capacities were influenced by pH and the initial Cd（II） concentration. The amount adsorbed was greatest at pH 6.5 and the initial Cd（II） concentration of 0.07 mg·L^-1, respectively. Nanometer AlO（OH） played a major role in the adsorption process, whereas the fiberglass and ACF were assistants in the process of removing Cd（II）. In addition, the adsorption capacities for Cd（II） were obviously reduced from 128.50 mg·L^-1 to 64.28 mg·L^-1 when Pb ions were present because Pb ions took up more adsorption sites.     

Removal of Anionic Metal Ions from Wastewater by Hydroxide-type Adsorbents

Generally speaking, anionic metal concentrations in wastewater from industries and mineral processing plants are well above the allowed limits for effluent set by the Ministry of Environment of Japan. Nowadays, the removal of anionic ions has been considered difficult and development of new process is desperately needed. In this paper, we report the development of three hydroxide-type adsorbents, illustrating their adsorption efficiency in removing As, Se, Mo and Sb ions from aqueous solutions. The main finding of this work was that the adsorption behavior was influenced very much by both the pH and the adsorbent concentration. Nevertheless, the newly developed hydroxide-type adsorbents were very effective in reducing the concentration of those anionic ions.     

杏核的活性壳：一种用于黄金回收的有价值的吸附剂

Activated carbon has been proven to be an effective adsorbent for the recovery of a wide variety of metal ions from aqueous solutions. In this research, the activated hard shell of Iranian apricot stones was used for gold recovery from electro-plating wastewater. The effect of parameters such as dose and particle size of adsorbent,pH, agitation speed of mixing on the gold recovery was investigated. The results showed that under the optimum operating conditions more than 98% of gold ions were adsorbed onto activated carbon after just 3 h. In addition, the adsorbed gold could be eluted from this adsorbent by improved striping method. The process involves contact of gold-laden adsorbent with a strong base at ambient temperatures followed by elution with an aqueous solution containing an organic solvent. It was found that activated hard shell of apricot stones has the potential to replace im ported commercial activated carbons in gold adsorption processes.     

Insights into membrane fouling implicated by physical adsorption of soluble microbial products onto D3520 resin

Membrane fouling is a major problem in membrane bioreactors(MBRs). In this study, membrane fouling caused by membrane rejection and adsorption was study. Filtration tests indicated that membrane rejected SMP, causing membrane pore blockage and then forming a gel layer. Batch adsorption experiments showed that adsorption of SMP onto PVDF membrane was a spontaneous physical adsorption process.Meanwhile, the absolute value ΔG of adsorption of SMP onto D3520 was higher than that of adsorption of SMP onto PVDF membrane, so SMP preferentially adsorbed onto D3520 rather than PVDF membrane. Thus, the effect of ARs on reducing the SMP concentration was investigated. It was found that, 6 g of D3520 was suitable for adsorption of SMP. This physical adsorption involved external film diffusion, intra-particle diffusion, and surface adsorption. The Redlich–Peterson isotherm model performed best in terms of describing this equilibrium data. The mechanism of membrane fouling mitigation was verified by MBR simulation system. A case study of AR–MBR system was conducted. The results showed that addition of D3520 can effectively alleviate the development of membrane fouling.     

Simultaneous removal of copper and zinc ions by low cost natural snail shell/hydroxyapatite/chitosan composite

In this work, the snail shell/hydroxyapatite/chitosan composite was prepared as adsorbent. The adsorption potential of the composite was studied for simultaneous sorption behavior of Zn(Ⅱ) and Cu(Ⅱ) ions in a batch system. Chitosan and hydroxyapatite(HAP) were extracted from shrimp shell and bone ash,respectively, so this is a low cost natural composite. To prepare the composite, chitosan was dissolved in acetic acid, then HAP and snail shell powders were added to the chitosan solution. The morphology and characterization of the composite was studied by SEM and EDX analysis. Atomic adsorption was used to measure the amount of the ions. Experimental parameters were optimized with Design Expert Software and five parameters such as the concentration of ions, p H, adsorbent amount and contact time were studied at room temperature. Optimized value for the parameters of Zn(Ⅱ) and Cu(Ⅱ) concentrations, p H, adsorbent dose, and contact time were 3.01 mg·L~(-1), 5.5, 0.02 g and 95 min, respectively. The adsorption isotherms for Zn(Ⅱ) and Cu(Ⅱ) showed Langmuir and Tempkin, respectively. Kinetic and equilibrium studies showed the experimental data of Zn(Ⅱ) and Cu(Ⅱ) ions were best described by the pseudo-second-order model. Studies on thermodynamic show the adsorption process were physical and spontaneous.     

固定床柱动态吸附法脱除人参醇提物中铅离子(英文)

The removal of lead from ginseng ethanol extracts by a fixed-bed column filled with an adsorbent bearing amine and carboxyl groups was investigated. The Pb2+ content was determined by inductively coupled plasma mass spectrometry. When the flowrate increased from 0.12 to 0.34 ml·min-1 , the column exhibited a marked increase in percentage of lead removal from 54.9% to 92.3%. Further increase in the flowrate did not bring evident changes to the lead removal, whereas an increase in the temperature could reinforce adsorption further, suggesting that the adsorption process was controlled by external film diffusion below the flowrate of 0.34 ml·min-1 , and by the intraparticle pore diffusion of lead ions when the flowrate exceeded it. A low remaining lead amount in extracts such as 0.11 mg·kg-1 (extracts powder) was achieved. The adsorbents also adsorbed effective constituents to some extent. But 88% of constituents adsorbed were taken off using a 70% ethanol aqueous solution.     

A new approach to improve sulfate uptake from contaminated aqueous solution: Metal layered double hydroxides functionalized metasomatic rock

In this study, waste rock of iron ore mine (metasomatic rocks) has been modified and utilized as a sulfate adsorbent to enhance sulfate removal from contaminated aqueous solution. The modification generating from the assembly of Mg–Al and Ni–Al layered double hydroxides and metasomatic rocks. The sulfate adsorption onto both adsorbents was performed favorably as a monolayer adsorption in homogeneous condition. The kinetic studies identify the chemisorption mechanism of sulfate adsorption process onto both adsorbents with the combination of the film-mass transfer and internal diffusion. Thermodynamic studies indicate that sulfate adsorption process onto both adsorbents was exothermic and spontaneous.     

New Inorganic–Organic Hybrid Materials and Their Oxides for Removal of Heavy Metal Ions: Response Surface Methodology Approach

In this paper, Cu(II), Fe(III), Pb(II), and Zn(II) heavy metal ions were removed from their aqueous solutions by using novel inorganic–organic hybrid materials, Al-GPTS-H and Al-GPTS-NaOSiMe₃-H (hybrid material-1 and 2, respectively), and their oxides (calcined-1 and 2) as adsorbents. These ions removal by adsorption was optimized by using response surface methodology (RSM). Central composite design (CCD) method was used in order to investigate the effects of initial pH, initial metal concentration of solutions and adsorbent quantity on the adsorption efficiency (R, %). As a result of the experiments under optimum conditions, the maximum % R values were obtained by hybrid material-1 for Fe(III) (99.89%) and by calcined material-1 for Pb(II) (97.14%), respectively. These quite high adsorption efficiency values have shown that these hybrid materials and their oxides are suitable to use for heavy metal ions removal from aqueous solutions.     

Effect of nickel coating on carbon for adsorption of cadmium from aqueous solutions

Nickel was coated on carbon and it was characterized by SEM and XRD. Sorption of Cd(II) ions onto carbon and nickel‐coated carbon (Ni/C), effect of acids, pH, shaking time, loading capacity, and adsorbent weight has been investigated. Acids reduce sorption and maximum sorption takes place from deionized water and R_d values for carbon and Ni/C in deionized water are 212.9 ± 0.9 and 232.5 ± 2.5. The sorption data followed the Freundlich, Dubinin–Radushkevich (D–R), isotherms and different parameters have been calculated. Sorption free energy values have been calculated and are 12.56 ± 0.19 and 14.84 ± 0.196 for carbon and Ni/C and indicate that adsorption process is chemisorption. Increase in adsorption shows the increase in catalytic activity of the adsorbent. The variation of sorption with temperature has been used to calculate the values of ΔH, ΔS, and ΔG for Cd(II) sorption. These values show that adsorption of Cd(II) ions on the adsorbents is endothermic, spontaneous, and entropy driven. Coating of carbon with nickel has improved its adsorption properties. Adsorption behaviour provides useful information for the catalytic activity of catalysts.     

Effect of Temperature on the Pb (II) Removal from Single Aqueous Solutions by a Locally Natural Mordenite: Equilibrium and Kinetic Modeling

Abstract

Zeolites have been shown to be effective adsorbents for the removal of heavy metals from aqueous solutions. In this study, mordenite (a natural zeolite) has been used for the removal of lead ions to evaluate its potential use as a low‐cost adsorbent. Batch experiments have been conducted to evaluate the equilibrium and process kinetics at different temperatures. The equilibrium experimental data for various temperatures studied conformed to the six adsorption isotherm equations: the Langmuir, Freundlich, Sips, Redlich‐Peterson (RP), Dubinin‐Radwhkevich (DR), and Flory‐Huggins (FH). Constants were determined for each of the isotherms. The apparent thermodynamic parameters were calculated and the obtained values supported the conclusion that the lead ions adsorption onto mordenite was a spontaneous, exothermic process of physical nature. The kinetic experimental data fitted the pseudo‐second‐order, parabolic diffusion and Elovich equations successfully. The process of lead ions adsorption onto the Na‐mordenite was diffusion‐controlled. The value of apparent activation energy also confirmed a physical mechanism for the adsorption of lead ions onto Na‐mordenite.     

Removal of strontium ions from aqueous solution using hybrid membranes: Kinetics and thermodynamics

The removal of radionuclide from radioactive wastewater has captured much attention. Strontium-90 is one of the major radionuclides. To develop a new type of adsorbents to remove strontium ions from the radioactive wastewater, in this study, novel hybrid membranes were prepared and characterized. The adsorption kinetics, thermodynamic parameters of ΔG, ΔH and ΔS, as well as surface SEM and EDS images were used to investigate the removal of strontium ions from stimulated radioactive wastewater using the previously prepared hybrid membranes as efficient adsorbents. The study of kinetic model confirmed that the adsorption of strontium ions on these hybrid membranes followed the Lagergren pseudo-second order model. Moreover, it was proved that the adsorption of strontium ions on these samples was solely controlled by intraparticle diffusion. The negative values of ΔG and the positive values of ΔH indicated that the adsorption of strontium ions on samples A-D is a spontaneous and endothermic process in nature. Furthermore, surface SEM and DES images give significant evidence to confirm the existence of strontiumions on the surface of the adsorbed samples. These findings demonstrate that these hybrid membranes are promising adsorbents for the removal of strontium ions from aqueous solution and can be potentially applied in the adsorptive separation of radionuclides from the radioactive wastewater.     

Polyamine Functionalized Magnetite Nanoparticles as Novel Adsorbents for Cu(II) Removal from Aqueous Solutions

Three novel magnetic adsorbents were synthesized through the immobilization of di-, tri-, and tetraamine onto the surface of silica coated magnetite nanoparticles. The adsorbents were characterized by XRD patterns, FTIR spectroscopy, elemental and thermogravimetric analysis, magnetic measurements, SEM/TEM, EDX spectroscopy, and N₂ adsorption/desorption isotherms. Their capacity to remove copper ions from aqueous solutions was investigated and discussed comparatively. The equilibrium data were analyzed using Langmuir and Freundlich isotherms. The kinetics was evaluated using the pseudo-first-order, pseudo-second-order, and intra-particle diffusion models. The best interpretation for the equilibrium data was given by the Langmuir isotherm for the tri- and tetraamine functionalized adsorbents, while for the diamine functionalized adsorbent the Freundlich model seemed to be better. The kinetic data were well fitted to the pseudo-second-order model. The overall rate of adsorption was significantly influenced by external mass transfer and intraparticle diffusion. It was observed that the adsorption capacity at room temperature decreased as the length of polyamine chain immobilized on the adsorbent surface increased, the maximum adsorption capacities being 52.3 mg g^?1 for 1,3-diaminopropan functionalized adsorbent, 44.2 mg g^?1 for diethylenetriamine functionalized adsorbent, and 39.2 mg g^?1 for triethylenetetramine functionalized adsorbent. The sorption process proved to be highly dependent of pH. The results of the present work recommend these materials as potential candidates for copper removal from aqueous solutions.     

Fast removal of Hg(II) ions from aqueous solution by amine-modified attapulgite

Natural attapulgite (ATP) was modified with an amino-terminated organosilicon (3-aminopropyltriethoxysilane, APTES) in order to develop an effective adsorbent for aqueous Hg(II) removal. The surface area of the modified ATP (M-ATP) was calculated using the Brunauer–Emmett–Teller method. The adsorbent was characterized using scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray fluorescence (XRF), Fourier transform infrared spectroscopy (FT-IR) and electrophoretic mobility. Due to complexation between mercury and the amine functional groups on the M-ATP, the adsorption capacities significantly increased from 5 mg/g (raw ATP) to 90 mg/g (M-ATP). Batch adsorption results showed that the adsorption process was rapid and over 90% of aqueous Hg(II) was removed within 1 h. The efficiency of the adsorbent was found to remain almost constant over a wide pH range (3–11). Adsorption of Hg(II) by M-ATP was proposed as the complexation between mercury and the amine functional groups on the M-ATP surface. Ionic strength and co-existing ions had a slight influence on the adsorption capacity. Hg(II) adsorbed onto M-ATP could be effectively desorbed in 1:1 (m/m) chlorohydric acid/thiourea solution. Our results suggest that the M-ATP may be used as renewable adsorbents for fast removal of Hg(II) from aqueous solutions.     

Optimization and analysis of nickel adsorption on microwave irradiated rice husk using response surface methodology (RSM)

BACKGROUND: The removal of heavy metals using adsorption techniques with low cost biosorbents is being extensively investigated. The improved adsorption is essentially due to the pores present in the adsorbent. One way of improving the porosity of the material is by irradiation of the precursor using microwaves. In the present study, the adsorption characteristics of nickel onto microwave‐irradiated rice husks were studied and the process variables were optimized through response surface methodology (RSM). RESULT: The adsorption of nickel onto microwave‐irradiated rice husk (MIRH) was found to be better than that of the raw rice husk (RRH). The kinetics of the adsorption of Ni(II) from aqueous solution onto MIRH was found to follow a pseudo‐second‐order model. Thermodynamic parameters such as standard Gibbs free energy (ΔG°), standard enthalpy (ΔH°), and standard entropy (ΔS°) were also evaluated. The thermodynamics of Ni(II) adsorption onto MIRH indicates that it is spontaneous and endothermic in nature. The response surface methodology (RSM) was employed to optimize the design parameters for the present process. CONCLUSION: Microwave‐irradiated rice husk was found to be a suitable adsorbent for the removal of nickel(II) ions from aqueous solutions. The adsorption capacity of the rice husk was found to be 1.17 mg g^?1. The optimized parameters for the current process were found as follows: adsorbent loading 2.8 g (100 mL)^?1; Initial adsorbate concentration 6 mg L^?1; adsorption time 210 min.; and adsorption temperature 35 °C. Copyright © 2008 Society of Chemical Industry     

Adsorption behavior of Cd(II) ions on humic acid-immobilized sodium alginate and hydroxyl ethyl cellulose blending porous composite membrane adsorbent

A novel porous composite adsorbent was prepared by using sodium alginate and hydroxyl ethyl cellulose blending as an immobilization matrix for humic acid, then crosslinked by glutaraldehyde. The adsorbent was prepared using polyethylene glycol (PEG) as porogen and used to remove Cd(II) ions from aqueous solution. The physico-chemistry properties of adsorbent before and after adsorption were investigated by FT-IR, SEM and EDX methods. Batch adsorption experiments were carried out to investigate the effects of the amount of PEG adding to the adsorbent, solution pH, dosage of adsorbent, initial Cd(II) ions concentration and contact time. The prepared adsorbent exhibited the maximum uptake of 148.9 mg/g under the optimal adsorption condition. Kinetics experiments indicated that the pseudo-first-order model displayed the best correlation with adsorption kinetics data. The Crank model showed that the intraparticle solute diffusion was the rate-controlling adsorption step. Besides, experimental data could be better described by the Freundlich isotherm model. Dubinin–Radushkevich isotherm indicated that the adsorption was mainly an ion exchange process. The results suggested that the prepared adsorbent is promising for using as an effective and economical adsorbent for Cd(II) ions removal.