核壳型纳米二氧化钛/聚合物复合粒子研究进展

综简述了核壳型纳米二氧化钛/聚合物复合粒子的形成机理,重点对纳米TiO-核/聚合物-壳和2聚合物-核/纳米TiO-壳这2种复合粒子进行了介绍,指出了目前存在的问题和发展方向。2     

微乳液法制备Fe3O4/TiO2磁性纳米粒子

采用多元醇还原法制备出平均粒径为6.0 nm的Fe3O4磁性纳米粒子,以此磁性纳米粒子为核,在OP-10/正丁醇/环己烷/浓氨水反向微乳体系中制备出Fe3O4/TiO2磁性纳米复合粒子,通过XRD,TEM,VSM对复合粒子进行性能表征。结果表明,采用微乳液法能够制备出Fe3O4/TiO2磁性纳米复合粒子,并且包覆后比饱和磁化强度有所下降,但矫顽力仍趋近于0,显示超顺磁性。     

微乳液法制备Fe3O4/TiO2磁性纳米粒子

采用多元醇还原法制备出平均粒径为6.0 nm的Fe3O4磁性纳米粒子,以此磁性纳米粒子为核,在OP-10/正丁醇/环己烷/浓氨水反向微乳体系中制备出Fe3O4/TiO2磁性纳米复合粒子,通过XRD,TEM,VSM对复合粒子进行性能表征。结果表明,采用微乳液法能够制备出Fe3O4/TiO2磁性纳米复合粒子,并且包覆后比饱和磁化强度有所下降,但矫顽力仍趋近于0,显示超顺磁性。     

原位聚合法制备纳米TiO2/有机硅改性丙烯酸酯复合乳液

用硅烷偶联剂对纳米二氧化钛(TiO2)粒子表面进行预处理，使其表面由亲水性变为疏水性，并在其表面接枝上可反应的有机官能团。通过改性纳米TiO2表面上的原位聚合反应，制备了纳米TiO2／硅丙复合乳液。透射电子显微镜观察结果显示，乳液中存在两种结构的乳胶粒子：一种是以聚丙烯酸酯为核、有机硅聚合物为壳的核壳结构硅丙乳胶粒子；另一种是以纳米TiO2为核、有机聚合物为壳的纳米TiO2／聚合物复合结构乳胶粒子。乳胶粒子的结构形态可由乳化剂的用量控制。该复合乳液具有较好的杀菌效果，在较短时间内对细菌的杀灭率可达90％以上。     

核壳复合粒子的制备

以硅烷偶联剂改性的纳米二氧化钛(SB570TiO为核材料,苯乙烯(St和二乙烯苯(DVB共聚物为壳材料,通过分散聚合法制备核壳复合粒子。通过用透射电子显微镜对粒子形态的观察,研究了稳定剂用量、引发剂用量、单体用量以及反应介质对核壳复合粒子制备的影响。结果表明,在mSB570TiO为1.47 gmSt为2.00 gmDVB为2.00 gm偶氮二异丁腈(AIBN为0.20 gm聚乙烯基吡咯烷酮K30PVP为2.00 g反应介质为乙醇时,能得到近球形的核壳复合粒子。     

胺化Fe3O4@SiO2纳米颗粒的制备及其对水溶液中Cr(VI)的去除

六价铬(Cr(VI))因其高毒性受到人们广泛关注,为提高吸附法去除Cr(VI)的效率,合成了一种新型核壳结构的聚乙烯亚胺(PEI)功能化复合纳米颗粒(Fe3O4@SiO2–NH2),用于去除水中Cr(VI).研究了磁性纳米颗粒的化学结构、形貌和磁性特性.考察了初始浓度、吸附时间、溶液pH值和无机阴离子对Cr(VI)吸附...     

正交试验优化核壳型Fe3O4@SiO2磁性复合微球的制备工艺

采用共沉淀法和溶胶-凝胶法制备了磁性Fe3O4纳米粒子及核壳型Fe3O4@SiO2复合微球,利用红外光谱(FTIR)技术测定了微球表面基团,证明了SiO2确实在Fe3O4纳米粒子的表面形成了包覆层。通过正交试验设计,利用激光粒度仪测量的微球粒径为指标,考察TEOS与磁性微球的体积比、反应温度、反应时间和乙醇浓度四因素对微球粒径的影响。结果表明TEOS与磁性微球的体积比为2、反应温度为80℃、反应时间为4 h,乙醇浓度为80%是制备大粒径Fe3O4@SiO2磁性复合微球的适宜条件。     

核-壳型复合纳米粒子的研究现状及展望

本文介绍了核-壳型复合纳米粒子几类主要的合成方法,并在此基础上讨论了未来核-壳型复合纳米粒子研究的发展方向。     

核-壳型纳米复合粒子的制备方法研究

介绍了纳米复合材料的形成原理、自身性能以及纳米复合材料的研究意义。对纳米复合材料的制备方法进行了深入的研究,为制备新型的核-壳型纳米复合粒子提供了理论指导。     

磁性核壳Fe3O4/Ag纳米复合粒子的制备及性能

以硅烷偶联剂巯基丙基三甲氧基硅烷作为添加剂,甲醛作为还原剂,在Ag[(NH3)2] 溶液中制备出具有核壳结构的Fe3O4/Ag纳米复合粒子.用X射线衍射、场发射扫描电镜、差热分析、振动样品磁强计和Hall效应测试系统对样品进行了表征.结果表明:Fe3O4/Ag核壳复合粒子粒径为40～60 nm,Ag壳层厚度为10～15 nm,体积电阻率为7.757 3×10-4 Ω·cm,饱和磁化强度为26.37 A·m2/kg.     

Ferroelectric Ceramics in the PbMg1/3Nb2/3O3-PbCd1/3Nb2/3O3 System

Solid solutions (1-x)PbMg_1/3Nb_2/3O₃ + xPbCd_1/3Nb_2/3O₃ with x = 0-0.30 are investigated with purpose to work out a capacitor ceramics with good dielectric properties and low sintering temperature. It is found that the perovskite phase forms at sintering near to 980°C and begins to decompose at higher temperatures. When x grows from 0 to 0.30, the Curie temperature linearly grows from -10°C to +25°C, the dielectric permittivity ε_m in the Curie point T_C decreases from 18000 to 6800 and the phase transition becomes more diffused. The dielectric permittivity at room temperature is rather high and the temperature stability is improved. The system is of interest, because it can serve as a base for working out some ceramic materials for capacitors with low sintering temperature, which needs of no special atmosphere at burning.     

3-溴甲基-3-甲基氧杂环丁烷的合成

以2,2-二溴甲基丙醇（BBMP）为初始原料,通过与碱发生关环反应生成3-溴甲基-3-甲基氧杂环丁烷（BrMMO）。讨论了碱的种类和用量对BBMP关环产率的影响以及反应体系中碱的浓度、反应温度和反应时间对合成BrMMO产率的影响。通过实验确定的最佳工艺条件为：BBMP与NaOH摩尔比为1.0∶1.1,NaOH醇溶液的质量分数为12%,反应温度为78℃,反应时间为4h时,BrMMO产率为65%。最终产品经元素分析、IR和1HNMR检测确定为BrMMO。该试验工艺简单,原料易得,且溶剂便于回收、污染小。     

3-叠氮甲基-3-甲基氧丁环的合成

以三羟甲基乙烷与碳酸二乙酯为原料,经环化反应合成了3-羟甲基-3-甲基氧丁环(HMM O)。在低温下,HMM O与对甲苯磺酰氯反应生成3-磺酸酯甲基-3-甲基氧丁环(M TM O)。M TM O和叠氮化钠发生叠氮化反应形成叠氮单体3-叠氮甲基-3-甲基氧丁环(AMM O)。三步反应收率分别为76%,96%,85%。用核磁、红外、元素分析和DSC表征了化合物的结构与性能。结构鉴定表明为目标化合物AMM O。     

3-溴甲基-3-甲基氧杂环丁烷的合成

以2,2-二溴甲基丙醇(BBMP)为初始原料,通过与碱发生关环反应生成3-溴甲基-3-甲基氧杂环丁烷(BrMMO).讨论了碱的种类和用量对BBMP关环产率的影响以及反应体系中碱的浓度、反应温度和反应时间对合成BrMMO产率的影响.通过实验确定的最佳工艺条件为:BBMP与NaOH摩尔比为1.0∶1.1,NaOH醇溶液的质量分数为12%,反应温度为78℃,反应时间为4 h时,BrMMO产率为65%.最终产品经元素分析、IR和1HNMR检测确定为BrMMO.该试验工艺简单,原料易得,且溶剂便于回收、污染小.     

The Preparation and Crystal Structure of TlMnCl3, TlFeCl3, TlCoCl3 and TlNiCl3

The compounds TlMnCl₃, TlFeCl₃, TlCoCl₃ and TlNiCl₃ were prepared by heating T1C1 with the corresponding transition metal dichloride in an evacuated ampoule. Atomic positions were determined from powder photographs. All four compounds were found to be related to the perovskite type structure. TlMnCl₃ has a cubic structure, space group Pm3m, with a_o = 5.025 Å. The other three compounds are hexagonal, probable space group P6₃mc, with cell dimensions (in Å) a₀ = 6.976 and c₀ = 6.008 for the Fe compound, a₀ = 6.907 and c₀ = 5.981 for the Co compound and a₀ = 6.863 and c₀ = 5.881 for the Ni compound. The three hexagonal compounds are isomorphous. A measureable concentration of basal plane stacking faults was found to occur in TlFeCl₃ and also, to a lesser degree, in TlCoCl_3.     

Tunable color emission in LaScO3:Bi3+,Tb3+,Eu3+ phosphor

LaScO₃:xBi³⁺,yTb³⁺,zEu³⁺ (x = 0 − 0.04, y = 0 − 0.05, z = 0 − 0.05) phosphors were prepared via high-temperature solid-state reaction. Phase identification and crystal structures of the LaScO₃:xBi³⁺,yTb³⁺,zEu³⁺ phosphors were investigated by X-ray diffraction (XRD). Crystal structure of phosphors was analyzed by Rietveld refinement and transmission electron microscopy (TEM). The luminescent performance of these trichromatic phosphors is investigated by diffuse reflection spectra and photoluminescence. The phenomenon of energy transfer from Bi³⁺ and Tb³⁺ to Eu³⁺ in LaScO₃:xBi³⁺,yTb³⁺,zEu³⁺ phosphors was investigated. By changing the ratio of x, y, and z, trichromatic can be obtained in the LaScO₃ host, including red, green, and blue emission with peak centered at 613, 544, and 428 nm, respectively. Therefore, two kinds of white light-emitting phosphors were obtained, LaScO₃:0.02Bi³⁺,0.05Tb³⁺,zEu³⁺ and LaScO₃:0.02Bi³⁺,0.03Eu³⁺,yTb³⁺. The energy transfer was characterized by decay times of the LaScO₃:xBi³⁺, yTb³⁺, zEu³⁺ phosphors. Moreover absolute internal QY and CIE chromatic coordinates are shown. The potential optical thermometry application of LaScO₃:Bi³⁺,Eu³⁺ was based on the temperature sensitivity of the fluorescence intensity ratio (FIR). The maximum S_a and S_r are 0.118 K⁻¹ (at 473.15 K) and 0.795% K⁻¹ (at 448.15 K), respectively. Hence, the LaScO₃:Bi³⁺,Eu³⁺ phosphor is a good material for optical temperature sensing.     

2,2,3-三氯-3-苯基-3-(3-甲基苯甲酰基)丙腈的合成研究

以苯甲酰氯、四氯化碳、间甲基苯甲酰氰为原料,合成了标题化合物。重点考察了氰化过程中不同原料配比、反应温度、时间、溶剂和催化剂用量对收率的影响。实验结果表明,其最佳反应条件为:n(1,1,2-三氯-2-苯基乙烯)∶n(3-甲基苯甲酰氰)=1∶1.2,二氯甲烷为反应溶剂,3 mmol催化剂三乙胺,室温反应5 h,总收率达80.6%。     

Thermal analyses of poly(3-hydroxybutyrate), poly(3-hydroxybutyrate-co-3-hydroxyvalerate), and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate)

Thermal analyses of poly(3-hydroxybutyrate) (PHB), poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(HB–HV)], and poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) [P(HB–HHx)] were made with thermogravimetry and differential scanning calorimetry (DSC). In the thermal degradation of PHB, the onset of weight loss occurred at the temperature (°C) given by T_o = 0.75B + 311, where B represents the heating rate (°C/min). The temperature at which the weight-loss rate was at a maximum was T_p = 0.91B + 320, and the temperature at which degradation was completed was T_f = 1.00B + 325. In the thermal degradation of P(HB–HV) (70:30), T_o = 0.96B + 308, T_p = 0.99B + 320, and T_f = 1.09B + 325. In the thermal degradation of P(HB–HHx) (85:15), T_o = 1.11B + 305, T_p = 1.10B + 319, and T_f = 1.16B + 325. The derivative thermogravimetry curves of PHB, P(HB–HV), and P(HB–HHx) confirmed only one weight-loss step change. The incorporation of 30 mol % 3-hydroxyvalerate (HV) and 15 mol % 3-hydroxyhexanoate (HHx) components into the polyester increased the various thermal temperatures T_o, T_p, and T_f relative to those of PHB by 3–12°C (measured at B = 40°C/min). DSC measurements showed that the incorporation of HV and HHx decreased the melting temperature relative to that of PHB by 70°C. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 90–98, 2001