共查询到20条相似文献,搜索用时 984 毫秒
1.
介绍了水煤浆湿式球磨机的工作原理和使用现状,通过研究该设备研磨介质钢球堆积密度及钢球填充率,优化研磨介质钢球的级配,提升了水煤浆湿式球磨机研磨效率,达到增产、降耗的效果;在项目中的实践应用表明,水煤浆湿式球磨机钢球级配优化后能提高产能10.29%,吨浆能耗降低14.87%。 相似文献
2.
3.
4.
5.
球磨机钢球磨损量的检测与计算 总被引:1,自引:0,他引:1
球磨机钢球级配的选取和保持合理级配稳定不变,对球磨机产质量都是至关重要的影响因素。合适的级配确定后要想在长期生产中保持此级配基本不变,最主要的是要确切知道钢球的磨损速度,掌握恰当的补球数量和种类,尤其高耐磨的合金钢球,如铬钼合金钢球在使用中钢球特性和磨损情况有 相似文献
6.
<正>球磨机是水泥生产的重要设备,钢球作为球磨机研磨体其性能直接影响球磨机的产量与出磨水泥的性能~([1-2]),同时钢球又是球磨机主要的消耗材料,它的质量也影响到水泥生产的成本和效益,因此选择质量优良的研磨体,对水泥生产企业而言,是提高产品质量和提高经济效益的双赢举措,而科学评价球磨机研磨体的质量,是其选择、使用和维护的 相似文献
7.
生产过程中钢球球径与级配的变化及补球于启宽唐山市启新水泥厂(063000)在生产过程中,球磨机因研磨体钢球不断磨损消耗,球径与级配发生变化,根据变化的规律,定期进行补充球耗,是稳定磨机粉磨效率与产品质量的重要环节。因此,研究球磨机内钢球直径的磨损与钢... 相似文献
8.
安宁矿业分公司为了改善磷矿磨矿产品的粒度组成,通过实验室实验对球磨机钢球充填率及级配进行研究,探究合理的钢球添加方案。结果表明,适宜的球磨机钢球充填率为38%,适宜的钢球级配为m(50mm)∶m(40 mm)∶m(30 mm)=30∶45∶25;适宜的钢球充填率及级配,能减轻矿石过磨,提高磨机效率和产能,节约钢球消耗量和药剂用量,为后续的选别作业提供合格的入选产品。 相似文献
9.
10.
11.
Although no significant major-element contamination is introduced by grinding coal in a steel pulverizer, abraded steel particles can conceivably affect the magnetic properties of pulverized coal. Magnetic and scanning-electron-microscope analyses of pulverized coal and coal fragments from the Herrin No. 6 seam in Illinois showed ferromagnetic and superparamagnetic contamination from the grinder. Significant changes in the magnetic properties of the coal were noted, indicating a total steel contamination of approximately 0.02 wt%. When coal samples were vibrated in the magnetic field of the vibrating-sample magnetometer, the superparamagnetic steel particles moved through the pulverized coal, and participated in the formation of multidomain clusters that in turn substantially affected the magnetization of the coal. 相似文献
12.
根据高水分印尼煤的煤质特点,分析了HP磨煤机磨制高水分印尼煤时的技术特点,从研磨出力和干燥出力角度出发,详细论述了HP磨煤机的选型方法。通过实际工程HP磨煤机选型实践,得出HP磨煤机可以磨制收到基水分高达40%的印尼煤,研磨出力和干燥出力均能满足设计要求。 相似文献
13.
14.
棒磨机的钢棒充填量及钢棒级配直接影响水煤浆的粒度分布,而粒度分布又是影响煤浆成浆性能的主要因素。通过工业试验摸索棒磨机的钢棒充填量及级配,从而生产出粒度分布合格的水煤浆。 相似文献
15.
16.
磨球的硬度和韧性是磨球选材时需要考虑的两项重要指标,为此而提出了相应的算式,以期改变过去的选材靠经验、数据靠试验的传统方法。 相似文献
17.
《Journal of the European Ceramic Society》2017,37(15):5065-5070
In high performance hybrid bearings the balls are conventionally made of silicon nitride ceramics. There are some disadvantages such as costs or the higher stiffness of silicon nitride compared to steel. Therefore, alternative materials are under investigation. The surface strength is one of the most important criteria for the qualification of the spherical components in the application. It has to be evaluated for each new material (or new surface finish).The recently standardised Notched Ball Test (NBT) enables one to determine the surface strength (tensile strength) of balls, which is strongly influenced by the surface finish and volume flaw populations. In this paper the NBT strength of five candidate materials for rolling elements (silicon carbide, silicon nitride, alumina, zirconia and zirconia toughened alumina) is investigated. Fractography is performed to evaluate the direct correlation between the defects found at the surface and the measured strength. 相似文献
18.
19.
球磨机中研磨体的运动方式主要有抛落式和泻落式两种。研磨体的抛落式运动已经有了比较深入的研究并作为设计中小型球磨机的理论基础.对于大型球磨机研磨体的运动方式应采用泻落式.本文对研磨体的泻落式运动进行讨论并给予数学描述,在此基础上为大型球磨机的设计提供了理论依据. 相似文献
20.
分析和总结了磨煤机试生产阶段存在的问题。通过针对性的调整影响磨煤机满负荷运行的循环风量和液压加载力,实现了磨煤机运行参数的工艺达标,有效保障了Shell煤气化炉的煤粉供应。 相似文献