Electrical conductivity of CuI-AsI<Subscript>3</Subscript>-As<Subscript>2</Subscript>Se<Subscript>3</Subscript> and CuI-SbI<Subscript>3</Subscript>-As<Subscript>2</Subscript>Se<Subscript>3</Subscript> chalcogenide films prepared by chemical deposition

The electrical conductivity of chalcogenide semiconductor films in the CuI-AsI₃-As₂Se₃ and CuI-SbI₃-As₂Se₃ systems, which have been prepared by chemical deposition from mono-n-butylamine, has been studied as a function of the temperature and film composition. It has been established that the electrical conductivity of the CuI-AsI₃-As₂Se₃ and CuI-SbI₃-As₂Se₃ films is predominantly determined by the copper iodide content. It has been demonstrated that the electrical properties of the chalcogenide glasses and the related films are characterized by the same values to within the experimental error, which is explained by the same model of dissolution of vitreous semiconductors in amines with the retention of the electrical properties of chalcogenide glasses after the deposition of films from their solutions.     

Europium(II) in glasses of the Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>-MnO-Eu<Subscript>2</Subscript>O<Subscript>3</Subscript> system

Triply and doubly charged states of europium are revealed by ¹⁵¹Eu Mössbauer spectroscopy in the structure of glasses of the composition (mol %) 19.5Al₂O₃, 31.5SiO₂, 26.5MnO, and 22.5Eu₂O₃. The isomer shifts in the Mössbauer spectra of Eu³⁺ and Eu²⁺ ions in the structure of glasses differ from the isomer shifts in the spectra of the Eu₂O₃ and EuO compounds. This difference is explained by the fact that the electron density at ¹⁵¹Eu nuclei is affected by the manganese and aluminum atoms, which are not bound directly to the europium atoms. The broadening of the spectra of the Eu²⁺ ions in glasses is caused by the nonuniform isomer shift.     

Scanning Probe Microscopy on heterogeneous CaCu<Subscript>3</Subscript>Ti<Subscript>4</Subscript>O<Subscript>12</Subscript> thin films

The conductive atomic force microscopy provided a local characterization of the dielectric heterogeneities in CaCu₃Ti₄O₁₂ (CCTO) thin films deposited by MOCVD on IrO₂ bottom electrode. In particular, both techniques have been employed to clarify the role of the inter- and sub-granular features in terms of conductive and insulating regions. The microstructure and the dielectric properties of CCTO thin films have been studied and the evidence of internal barriers in CCTO thin films has been provided. The role of internal barriers and the possible explanation for the extrinsic origin of the giant dielectric response in CCTO has been evaluated.     

Corrosion-resistant ceramics and polymer composites based on the BaO-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript> system

This paper reports on the results of investigations aimed at synthesizing ceramic materials with a high mechanical strength, as well as with high thermal and chemical resistances to corrosive media. The methods used for one-stage preparation of barite-based ceramic and polymer composites with these properties are considered.     

Electrical properties of poly(vinyl alcohol) (PVA) based on LiFePO<Subscript>4</Subscript> complex polymer electrolyte films

Li ion conducting polymer electrolyte films were prepared based on poly(vinyl alcohol) (PVA) with 5, 10, 15, 20, 25 and 30 wt% lithium iron phosphate (LiFePO₄) salt using a solution-casting technique. X-ray diffraction (XRD) was used to determine the complexation of the polymer with LiFePO₄ salt. Differential scanning (DSC) calorimetry was used to determine the melting temperatures of the pure PVA and complexed films. The maximum ionic conductivity was found to be 1.18 × 10⁻⁵ S cm⁻¹ for (PVA:LiFePO₄) (75:25) film, which increased to 3.12 × 10⁻⁵ S cm⁻¹ upon the addition of propylene carbonate (PC) plasticizer at ambient temperature. The Li⁺ ion transport number was found to be 0.40 for (PVA: LiFePO₄) (75:25) film using AC impedance and DC polarization methods. Dielectric studies were performed for these polymer electrolyte films in the frequency range of 10 Hz to 10 MHz at different temperatures. The activation energies of the complexed films were calculated from the dielectric loss tangent spectra and were found to be 0.35, 0.30, 0.27 and 0.28 eV. The cyclic voltammogram (CV) curves of (PVA: LiFePO₄) (75:25)+PC film exhibited higher specific capacities than those for other films.     

Thermal stability of tin charge states in the structure of the (As<Subscript>2</Subscript>Se<Subscript>3</Subscript>)<Subscript>0.4</Subscript>(SnSe)<Subscript>0.3</Subscript>(GeSe)<Subscript>0.3</Subscript> glass

Two valence states of tin atoms (namely, the doubly charged Sn²⁺ and quadruply charged Sn⁴⁺ states) in the structure of the (As₂Se₃)_0.4(SnSe)_0.3(GeSe)_0.3 glasses are identified by ¹¹⁹Sn Mössbauer spectroscopy. It is demonstrated that the concentration ratio of the doubly charged Sn²⁺ and quadruply charged Sn⁴⁺ states in the glass of this composition depends on the rate of quenching of the melt and on the initial temperature of the melt before quenching. The optical band gap and the activation energy for electrical conduction of the studied glass do not depend on the concentration ratio of the Sn²⁺ and Sn⁴⁺ ions. This behavior of the optical band gap and the activation energy is explained within the model according to which the structure of the glasses under investigation is built up of the structural units AsS_3/2, As_2/2Se_4/4, GeSe_4/2, SnSe_4/2, and SnSe_3/3, which correspond to the compounds AsSe₃, AsSe, GeSe₂, SnSe₂, and SnSe, respectively.     

Examining the use of Fe<Subscript>3</Subscript>O<Subscript>4</Subscript> nanoparticles to enhance the NH<Subscript>3</Subscript> sensitivity of polypyrrole films

Summary Polypyrrole (PPy) composite films with different contents of Fe₃O₄ were prepared by in-situ polymerization of pyrrole in aqueous solutions. The dependence of dc current changes on the response of the samples exposure to NH₃ vapor has been investigated. The results shows the composite films are more stable than the pristine ones after being exposed to NH₃ vapor. Meanwhile, the response time was reduced with increasing the Fe₃O₄ content in the films. The results might be originated from the structural changes in the PPy films caused by the addition of Fe₃O₄.     

Low-temperature anti-icing reagents in the Ca(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-Mg(NO<Subscript>3</Subscript>)<Subscript>2</Subscript>-CO(NH<Subscript>2</Subscript>)<Subscript>2</Subscript>-H<Subscript>2</Subscript>O system and their properties

The polytherms of ice melting in sections of the Ca(NO₃)₂-Mg(NO₃)₂-CO(NH₂)₂-H₂O system with different component ratios were studied in the temperature interval from 0 to −40°C. A series of nitrate and nitrate-carbonate reagents that are promising for the creation of anti-acing reagents were found, which form eutectics with ice at temperatures from −25 to −39°C. Their properties, viz., melting properties with respect to ice and corrosiveness on metals and alloys, were determined. An effective corrosion inhibitor was selected.     

Synthetic spinels of the system MgO-Cr<Subscript>2</Subscript>O<Subscript>3</Subscript>-Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>

Synthetic spinels of the system MgO-Cr₂O₃-Al₂O₃-Fe₂O₃ are considered and the desirability of organizing their production for the refractory industry is demonstrated. Translated from Novye Ogneupory, No. 6, pp. 32–35, June 2008.     

Preparation of oxidized PbSeO<Subscript>3</Subscript> films from PbSe films

Lead selenide nanocrystalline films of a controlled thickness have been obtained using vacuum deposition onto substrates of C-29 glass, part of which were oxidized in a dry air atmosphere. The surfaces and cleavages of both initial and oxidized PbSe films are studied using scanning electron microscopy. The qualitative and quantitative estimation of the elemental content in the subsurface region of all studied films based on PbSe is investigated using X-ray microanalysis. The presence of lead selenide and lead selenite on the surface of the films under study is proven, and the principle possibility of forming PbSeO₃ films from PbSe films is shown.     

Isothermal vapor-liquid equilibria for the binary system of dimethyl ether (CH<Subscript>3</Subscript>OCH<Subscript>3</Subscript>)+ methanol (CH<Subscript>3</Subscript>OH)

Isothermal vapor-liquid equilibrium data for the binary mixture of dimethyl ether (CH₃OCH₃)+methanol (CH₃OH) were measured within the temperature range of 308.15–328.15 K. The data in the two-phase region were measured by using a circulation-type equilibrium apparatus in which both vapor and liquid phases are continuously recirculated. The experimental data were correlated with the Peng-Robinson equation of state (PR-EoS) using the Wong-Sandler mixing rules combined with the NRTL excess Gibbs free energy model. The values calculated by the PR-EOS with the W-S mixing rules show good agreement with our experimental data.     

Epitaxial growth of GaN on (0001) Al<Subscript>2</Subscript>O<Subscript>3</Subscript> via solution-cast seed layer formation process using Ga(mDTC)<Subscript>3</Subscript>

This paper reports an alternative method for the growth of GaN epitaxial layer on (0001) Al₂O₃ substrate by hot-wall vapor phase epitaxy technique. Tris (N,N-dimethyldithiocarbamato)-gallium (III), Ga(mDTC)₃ was introduced as a precursor material for the seed layer formation in the growth of GaN. Optimal growth conditions with seed layers formed by the Ga(mDTC)₃ concentration of 0.047 mol/L were identified: Growth temperature was found to be 850 °C, and optimal distance between the reactant outlet and substrate was determined to be 12.5 cm. Characterization results showed that this growth method produce high-crystallinity GaN epitaxial layers at a relatively lower growth temperature compared to the existing growth techniques and simplify the growth process.     

Crystal structure of new compound (Rb,K)<Subscript>2</Subscript>Cu<Subscript>3</Subscript>(P<Subscript>2</Subscript>O<Subscript>7</Subscript>)<Subscript>2</Subscript>

A new compound of (Rb,K)₂Cu₃(P₂O₇)₂ is obtained by high-temperature reactions from a mixture of RbNO₃, KNO₃, Cu(NO₃)₂, and (NH₄)₄P₂O₇. The crystal structure was solved by direct methods and refined to R ₁ = 0.056 for 5022 independent reflections. The compound belongs to a rhombic crystal system, P2₁2₁2₁, Z = 8, a = 9.9410(7) Å, b = 13.4754(6) Å, c = 18.6353 (3) Å, and R = 0.056. The basis of the structure is a complex copper-phosphate skeleton of the composition of [Cu₃(P₂O₇)₂]^2–, which can be regarded as consisting of two types of heteropolyhedral layers parallel to the (001) plane. The layers are alternated with each other, forming a frame, in the cavities of which the positions of alkali cations are located, statistically populated with K⁺ and Rb⁺ ions. Based on the refined populations of the positions of alkali cations, an exact chemical formula of the compound can be written as Rb_1.28K_0.72Cu₃(P₂O₇)₂. The compound is the most complex among those known to this day of the composition of A₂ ^IB₃ ^II(P₂O₇)₂ (A = Li, Na, K, Rb, or Cs; B = Ni, Cu, or Zn).     

Heat resistant properties of PP/Al(OH)<Subscript>3</Subscript>/Mg(OH)<Subscript>2</Subscript> flame retardant composites

Vicat softening point temperature (T _V) and heat deflection temperature (T _d) are important parameters for characterization of heat resistant properties of polymeric materials. PP/Al(OH)₃/Mg(OH)₂ flame retardant composites were prepared using a twin-screw extruder, and the T _V and T _d of the composites were measured. The results showed that the T _V and T _d increased nonlinearly with an addition of the weight percentage of the flame retardant additives except for individual data points, while the T _V and T _d decreased with increasing the filler particle size when the content of flame retardant additives was constant. Under the same conditions, filling small amount of zinc borate into the composites might improve the heat resistant properties of the composite systems. Moreover, the morphology of the impact fracture surface of the specimens was observed by means of scanning electron microscope to understand the dispersion and distribution of the filler particles in the PP matrix.     

Side-by-Side In(OH)<Subscript>3</Subscript> and In<Subscript>2</Subscript>O<Subscript>3</Subscript> Nanotubes: Synthesis and Optical Properties

A simple and mild wet-chemical approach was developed for the synthesis of one-dimensional (1D) In(OH)₃ nanostructures. By calcining the 1D In(OH)₃ nanocrystals in air at 250 °C, 1D In₂O₃ nanocrystals with the same morphology were obtained. TEM results show that both 1D In(OH)₃ and 1D In₂O₃ are composed of uniform nanotube bundles. SAED and XRD patterns indicate that 1D In(OH)₃ and 1D In₂O₃ nanostructures are single crystalline and possess the same bcc crystalline structure as the bulk In(OH)₃ and In₂O₃, respectively. TGA/DTA analyses of the precursor In(OH)₃ and the final product In₂O₃ confirm the existence of CTAB molecules, and its content is about 6%. The optical absorption band edge of 1D In₂O₃ exhibits an evident blueshift with respect to that of the commercial In₂O₃ powders, which is caused by the increasing energy gap resulted from decreasing the grain size. A relatively strong and broad purple-blue emission band centered at 440 nm was observed in the room temperature PL spectrum of 1D In₂O₃ nanotube bundles, which was mainly attributed to the existence of the oxygen vacancies.     

Simultaneous absorption of CO<Subscript>2</Subscript> and SO<Subscript>2</Subscript> into aqueous AMP/NH<Subscript>3</Subscript> solutions in binary composite absorption system

To enhance the absorption rate for CO₂ and SO₂, aqueous ammonia (NH₃) solution was added to an aqueous 2-amino-2-methyl-1-propanol (AMP) solution. The simultaneous absorption rates of AMP and a blend of AMP+ NH₃ for CO₂ and SO₂ were measured by using a stirred-cell reactor at 303 K. The process operating parameters of interest in this study were the solvent and concentration, and the partial pressures of CO₂ and SO₂. As a result, the addition of NH₃ solution into aqueous AMP solution increased the reaction rate constants of CO₂ and SO₂ by 144 and 109%, respectively, compared to that of AMP solution alone. The simultaneous absorption rate of CO₂/SO₂ on the addition of 1 wt% NH₃ into 10 wt% AMP at a p _A1 of 15 kPa and p _A2 of 1 kPa was 5.50×10⁻⁶ kmol m⁻² s⁻¹, with an increase of 15.5% compared to 10 wt% AMP alone. Consequently, the addition of NH₃ solution into an aqueous AMP solution would be expected to be an excellent absorbent for the simultaneous removal of CO₂/SO₂ from the composition of flue gas emitted from thermoelectric power plants.     

Synthesis and Characterization of Ferromagnetic BaFe<Subscript>2</Subscript>O<Subscript>4</Subscript> Nanocrystals Using Novel Ionic Precursor Complex [Fe(opd)<Subscript>3</Subscript>]<Subscript>2</Subscript>[Ba(CN)<Subscript>8</Subscript>]

The following investigation reports the synthesis of novel complex [Fe(opd)₃]₂[Ba(CN)₈] and preparation of BaFe₂O₄ nanoparticles through thermal decomposition without using any surfactant. The complex was characterized via Furrier transform infrared spectroscopy (FT-IR), ultra violet-visible spectroscopy (UV–vis), conductivity measurement and elemental analysis. The synthesized crystals of inorganic precursor complex was transferred to furnace, where they were calcined under normal atmosphere condition at 900 °C for 4 h. Formation of BaFe₂O₄ was supported by FT-IR and energy-dispersive X-ray analysis. Hexagonal structure of nano-oxide was confirmed on powder X-ray diffraction. Furthermore, uniform morphology of nanocrystals were reported by scanning electron microscopy. The saturation magnetization (22 emu/g), remanent magnetization (6 emu/g) and coercivity (400 Oe) reported on vibrating sample magnetometer curve illustrates the promising industrial and medicinal applications of prepared mixed oxide.     

Photoreduction of CO<Subscript>2</Subscript> into CH<Subscript>4</Subscript> using Bi<Subscript>2</Subscript>S<Subscript>3</Subscript>-TiO<Subscript>2</Subscript> double-layered dense films

Nano-sized bismuth sulfide (Bi₂S₃) and titanium dioxide (TiO₂) with the orthorhombic and anatase tetragonal structures, respectively, were synthesized for application as catalysts for the reduction of carbon dioxide (CO₂) to methane (CH₄). Four double-layered dense films were fabricated with different coating sequences—TiO₂ (bottom layer)/Bi₂S₃ (top layer), Bi₂S₃/TiO₂, TiO₂/Bi₂S₃: TiO₂ (1 : 1) mix, and Bi₂S₃: TiO₂ (1 : 1) mix/Bi₂S₃: TiO₂ (1 : 1) mix—and applied to the photoreduction of CO₂ to CH₄; the catalytic activity of the fabricated films was compared to that of the pure TiO₂/TiO₂ and Bi₂S₃/Bi₂S₃ doubled-layered films. The TiO₂/Bi₂S₃ double-layered film exhibited superior photocatalytic behavior, and higher CH₄ production was obtained with the TiO₂/Bi₂S₃ double-layered film than with the other films. A model of the mechanism underlying the enhanced photoactivity of the TiO₂/Bi₂S₃ double-layered film was proposed, and it was attributed in effective charge separation.     

Uniform color coating of multilayered TiO<Subscript>2</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> films by atomic layer deposition

Thin film optics, based on light interference characteristics, are attracting increasing interest because of their ability to enable a functional color coating for various applications in optical, electronic, and solar industries. Here, we report on the dependence of coloring characteristics on single-layer TiO₂ thicknesses and alternating TiO₂/Al₂O₃ multilayer structures prepared by atomic layer deposition (ALD) at a low growth temperature. The ALD TiO₂ and Al₂O₃ thin films were studied at a low growth temperature of 80°C. Then, the coloring features in the single-layer TiO₂ and alternating TiO₂/Al₂O₃ multilayers using both the ALD processes were experimentally examined on a TiN/cut stainless steel sheet. The Essential Macleod software was used to estimate and compare the color coating results. The simulation results revealed that five different colors of the single TiO₂ layers were shown experimentally, depending on the film thickness. For the purpose of highly uniform pink color coating, the film structures of TiO₂/Al₂O₃ multilayers were designed in advance. It was experimentally demonstrated that the evaluated colors corresponded well with the simulated color spectrum results, exhibiting a uniform pink color with wide incident angles ranging from 0° to 75°. This article advances practical applications requiring highly uniform color coatings of surfaces in a variety of optical coating areas with complex topographical structures.     

Photoactive WO<Subscript>3</Subscript> and Se-WO<Subscript>3</Subscript> thin films for photoelectrochemical oxidation of organic compounds

Thin films of bare and Se-containing tungsten trioxide (WO₃) on AISI304-type stainless steel were prepared by electrochemical deposition using peroxy-tungstate solutions. The obtained films were characterized by X-ray diffraction, photoelectron spectroscopy, scanning electron microscopy, thermal and photovoltammetry analyses. The oxidation of methylene blue, phenol, and methanol was used to evaluate the photoelectrocatalytic activity of the prepared films. It has been established that the incident photon-to-current efficiency (IPCE) in 0.1-M K₂SO₄ decreases as the concentration of methylene blue and phenol increases. On the contrary, the IPCE values increase with the increase in initial concentration of methanol. The bulk electrolysis experiments revealed that the prepared films are stable and can be used for photoelectrochemical oxidation of methanol.