共查询到16条相似文献,搜索用时 171 毫秒
1.
介绍了适用于大型竖管降膜蒸发器的多层喷淋盘式分布器的结构,对组成分布器的分布盘及初始分布装置的主要参数进行了分析,提出了设计、计算的公式和依据,并通过实验进行了验证。 相似文献
2.
竖管降膜蒸发器的性能研究 总被引:1,自引:0,他引:1
为了给竖管降膜蒸发器的设计提供依据,对降膜蒸发器的总传热系数的计算进行了讨论。分析了采用螺旋型分布器时的压力降。通过实验对所确定的公式及算图进行了验证。 相似文献
3.
评引进降膜蒸发装置中板—盘式液体分布器 总被引:1,自引:0,他引:1
1引言降膜蒸发器是一种高效设备,以其无静压温差损失、宜在小温差下操作、能保持热敏物料的质量及色、香、味等特点,在食品工业中得到广泛应用。由于降膜蒸发器为一次通过型膜式蒸发设备,因而料液均匀地分布到每根换热管上,沿管子周边均匀布膜并在整个 相似文献
4.
液体分布器是降膜式蒸发器的关键部件,制造及安装一经出现问题就会影响蒸发器的蒸发效果,如:局部或全部降膜管不能形成膜;料液在降膜管中产生偏流;降膜管结焦严重;降膜管出现干壁;蒸发温度升高;蒸发量降低。因此降膜式蒸发器中的液体分布器制造安装是关键。 相似文献
5.
文章针对水平管降膜蒸发器用筛板式制冷剂分布器的操作流量、开孔数目、开孔大小、孔口流出系数、分布均匀度等设计参数展开讨论,由此总结了制冷剂分布器各设计参数的确定方法,以及制冷剂分布器的理论设计思路;文章针对筛板式制冷剂分布器设计参数的讨论也适用于其他类型的分布器. 相似文献
6.
异形板外流降膜蒸发器及其研究 总被引:3,自引:3,他引:3
文中评述了异形要反外流降膜蒸发器结构及其特点,介绍了异形板上降落液膜传热性能的研究结果和一种新型布液装置及其性能,对于开发和扩大弄形板外流降膜蒸发器在食品工业听的应用具有现实意义。 相似文献
7.
黑液板式降膜蒸发器布液装置的研究 总被引:1,自引:0,他引:1
对黑液板式降膜蒸发器中目前采用的布液装置和作者提出的均流板式布液装置作了研究,比较了两者的布液性能,分析了影响布液不均匀度的主要因素。研究表明,均流板式布液装置布液均匀、操作中无飞溅,性能优于目前工业使用装置。 相似文献
8.
降膜蒸发器筛板式液体分布装置的实验研究 总被引:1,自引:0,他引:1
介绍了适用于大型水平管降膜蒸发器的筛板式液体分布装置。以不同浓度、不同粘度、不同温度的水溶液进行了模拟实验。通过分析实验结果,找出了影响液体分布的因素并分析了其影响,给出了在一定操作条件下适合于该分布器的流量范围。 相似文献
9.
由于降膜式蒸发器的广泛应用,其中重要部件液体分布器的结构已与传统的锯齿形、螺旋形及导流伞形发生了根本性的改变,已基本取代了上述的分布器的结构形式,在生产实践中经过大量的广泛应用证明,盘式分布器结构简单,适应性强。最重要的是这种分布器不易堵塞,布料均匀,特别适合于易结垢结焦的热敏性物料的蒸发浓缩。因此,具有代表性与普遍性。仅此进行阐述。 相似文献
10.
11.
12.
13.
14.
S BOUMAN R WAALEWIJN P DE JONG H J L J VAN DER LINDEN 《International Journal of Dairy Technology》1993,46(3):100-106
The design of falling-film evaporators for dairy products has hitherto been based on empirical correlations for the heat transfer in the evaporator tubes. With a one-tube evaporator experiments with whole and skim milk were performed to determine the heat transfer and pressure drop in evaporator tubes. Two evaporation regimens are important for dairy products: convection boiling at lower heat fluxes and nucleate boiling at larger heat fluxes. Correlations have been derived. Based on the results obtained, a computer program, EvaDes (Evaporator Design), for the optimal design of multistage falling-film evaporators for dairy products has been developed. It quantifies the heat-transfer area of the stages for different arrangements, process conditions and dimensions of the evaporator tubes. 相似文献
15.
16.
SANDRO ANGELETTI MAURO MORESI 《International Journal of Food Science & Technology》1983,18(5):539-563
The classic mathematical model of multi-effect evaporators operating in forward flow was combined with an accurate estimation of the overall heat transfer coefficient (HTC) in falling-film evaporators. For this correlation developed by Narayanamurthy & Sarma (1977) has been used. It was possible also to estimate the order of magnitude of the fouling factor (Rd). Finally, the design of an orange-juice double-effect falling-film evaporator (DEFFE) system was carried out according to two different strategies. 相似文献