Multilayer Amorphous‐Si‐B‐C‐N/γ‐Al2O3/α‐Al2O3 Membranes for Hydrogen Purification

The hydrogen and carbon monoxide separation is an important step in the hydrogen production process. If H₂ can be selectively removed from the product side during hydrogen production in membrane reactors, then it would be possible to achieve complete CO conversion in a single‐step under high temperature conditions. In the present work, the multilayer amorphous‐Si‐B‐C‐N/γ‐Al₂O₃/α‐Al₂O₃ membranes with gradient porosity have been realized and assessed with respect to the thermal stability, geometry of pore space and H₂/CO permeance. The α‐Al₂O₃ support has a bimodal pore‐size distribution of about 0.64 and 0.045 µm being macroporous and the intermediate γ‐Al₂O₃ layer—deposited from boehmite colloidal dispersion—has an average pore‐size of 8 nm being mesoporous. The results obtained by the N₂‐adsorption method indicate a decrease in the volume of micropores—0.35 vs. 0.75 cm³ g^?1—and a smaller pore size ?6.8 vs. 7.4 Å—in membranes with the intermediate mesoporous γ‐Al₂O₃ layer if compared to those without. The three times Si‐B‐C‐N coated multilayer membranes show higher H₂/CO permselectivities of about 10.5 and the H₂ permeance of about 1.05 × 10^?8 mol m^?2 s^?1 Pa^?1. If compared to the state of the art of microporous membranes, the multilayer Si‐B‐C‐N/γ‐Al₂O₃/α‐Al₂O₃ membranes are appeared to be interesting candidates for hydrogen separation because of their tunable nature and high‐temperature and high‐pressure stability.     

Thermisch gespritzte Schichten im System Al2O3–Cr2O3–TiO2 – ein Update

With exception of ZrO₂, the individual oxides and binary compositions in the system Al₂O₃–Cr₂O₃–TiO₂ are the most important oxide materials for the preparation of thermally sprayed coatings. In this contribution selected results of recent own research activities are summarized. This includes the comparison of microstructures, phase compositions, and properties of coatings, deposited by atmospheric plasma spraying (APS) and high velocity oxy‐fuel (HVOF) spraying. The possibilities arriving from the use of suspensions as feedstock are reviewed. Special attention is paid to the advantage of use of binary compositions in this system. Tribological, electrical and corrosion properties of the coatings are discussed.