首页 | 本学科首页   官方微博 | 高级检索  
相似文献
 共查询到20条相似文献,搜索用时 31 毫秒
1.
A novel hydrogel suspension array, which possesses the joint advantages of quantum‐dot‐encoded technology, bioresponsive hydrogels, and photonic crystal sensors with full multiplexing label‐free DNA detection capability is developed. The microcarriers of the suspension array are quantum‐dot‐tagged DNA‐responsive hydrogel photonic beads. In the case of label‐free DNA detection, specific hybridization of target DNA and the crosslinked single‐stranded DNA in the hydrogel grid will cause hydrogel shrinking, which can be detected as a corresponding blue shift in the Bragg diffraction peak position of the beads that can be used for quantitatively estimating the amount of target DNA. The results of the label‐free DNA detection show that the suspension array has high selectivity and sensitivity with a detection limit of 10?9 M . This method has the potential to provide low cost, miniaturization, and simple and real‐time monitoring of hybridization reaction platforms for detecting genetic variations and sequencing genes.  相似文献   

2.
A Hemoglobin‐CdTe‐CaCO3@polyelectrolyte 3D architecture is synthesized by a stepwise layer‐by‐layer method and is further used to fabricate an electrochemistry biosensor. While the calcium carbonate (CaCO3) microsphere acts as an effective host for the loading of cadmium telluride (CdTe) quantum dots due to its channel‐like structure, the polyelectrolyte layers further increase the loading amount and help in the formation of a thick and uniform quantum‐dot “shell”, which not only improves the stability of the spheres in water, but also contributes to the fast and effective direct electron transfer between the protein redox center and the macroscopic electrode. The materials are characterized and compared, and the possible mechanism for the direct electrochemistry phenomenon is hypothesized. Our work not only provides a facile and effective route for the preparation of quantum‐dot‐loaded spheres, but also sets an example of how the structure of functional materials can be tuned and related to their applications. In addition, it is one of the few examples of using CaCO3 microspheres in quantum‐dot loading and biosensing.  相似文献   

3.
Hybrid self‐assembly has become a reliable approach to synthesize soft materials with multiple levels of structural complexity and synergistic functionality. In this work, photoluminescent graphene quantum dots (GQDs, 2–5 nm) are used for the first time as molecule‐like building blocks to construct self‐assembled hybrid materials for label‐free biosensors. Ionic self‐assembly of disc‐shaped GQDs and charged biopolymers is found to generate a series of hierarchical structures that exhibit aggregation‐induced fluorescence quenching of the GQDs and change the protein/polypeptide secondary structure. The integration of GQDs and biopolymers via self‐assembly offers a flexible toolkit for the design of label‐free biosensors in which the GQDs serve as a fluorescent probe and the biopolymers provide biological function. The versatility of this approach is demonstrated in the detection of glycosaminoglycans (GAGs), pH, and proteases using three strategies: 1) competitive binding of GAGs to biopolymers, 2) pH‐responsive structural changes of polypeptides, and 3) enzymatic hydrolysis of the protein backbone, respectively. It is anticipated that the integrative self‐assembly of biomolecules and GQDs will open up new avenues for the design of multifunctional biomaterials with combined optoelectronic properties and biological applications.  相似文献   

4.
Recent advances in the chemistry of colloidal semiconductor nanocrystal doping have led to new materials showing fascinating physical properties of potential technological importance. This article provides an overview of efforts to dope one of the most widely studied colloidal semiconductor nanocrystal systems, CdSe quantum dots, with one of the most widely studied transition‐metal dopant ions, Mn2+, and describes the major new physical properties that have emerged following successful synthesis of this material. These properties include spin‐polarizable excitonic photoluminescence, magnetic circular dichroism, exciton storage, and excitonic magnetic polaron formation. A brief survey of parallel advances in the characterization of analogous self‐assembled Mn2+‐doped quantum dots grown by molecular beam epitaxy is also presented, and the physical properties of the colloidal quantum dots are shown to compare favorably with those of the self‐assembled quantum dots. The rich variety of physical properties displayed by colloidal Mn2+‐doped CdSe quantum dots highlights the attractiveness of this material for future fundamental and applied research.  相似文献   

5.
A simple, versatile method for non‐covalent functionalization of graphene based on solution‐phase assembly of alkane‐amine layers is presented. Second‐order Møller–Plesset (MP2) perturbation theory on a cluster model (methylamine on pyrene) yields a binding energy of ≈220 meV for the amine–graphene interaction, which is strong enough to enable formation of a stable aminodecane layer at room temperature. Atomistic molecular dynamics simulations on an assembly of 1‐aminodecane molecules indicate that a self‐assembled monolayer can form, with the alkane chains oriented perpendicular to the graphene basal plane. The calculated monolayer height (≈1.7 nm) is in good agreement with atomic force microscopy data acquired for graphene functionalized with 1‐aminodecane, which yield a continuous layer with mean thickness ≈1.7 nm, albeit with some island defects. Raman data also confirm that self‐assembly of alkane‐amines is a non‐covalent process, i.e., it does not perturb the sp2 hybridization of the graphene. Passivation and adsorbate n‐doping of graphene field‐effect devices using 1‐aminodecane, as well as high‐density binding of plasmonic metal nanoparticles and seeded atomic layer deposition of inorganic dielectrics using 1,10‐diaminodecane are also reported.  相似文献   

6.
A simple and versatile technique has been developed to prepare TiO2 and TiO2‐based composite (TiO2–CdS and TiO2–Au) nanotube arrays. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray (EDX) analysis, X‐ray diffraction (XRD), thermogravimetric analysis (TGA), UV‐vis spectroscopy, and photoluminescence (PL) spectroscopy are used to characterize their morphology, structure, composition, and properties. The TiO2–CdS nanotubes contained many TiO2 and CdS quantum dots and exhibited a novel PL band in the blue‐wavelength range. The reported strategy will be useful for fabricating nanoparticle–nanoparticle composite nanostructure arrays, which are suitable for applications in catalysis, chemical sensors, nanoelectrodes, and nanodevices.  相似文献   

7.
Quantum dots (QDs) luminescent films have broad applications in optoelectronics, solid‐state light‐emitting diodes (LEDs), and optical devices. This work reports the fabrication of multicolor‐light‐emitting ultrathin films (UTFs) with 2D architecture based on CdTe QDs and MgAl layered double hydroxide (LDH) nanosheets via the layer‐by‐layer deposition technique. The hybrid UTFs possess periodic layered structure, which is verified by X‐ray diffraction. Tunable light emission in the red‐green region is obtained by changing the particle size of QDs (CdTe‐535 QDs and CdTe‐635 QDs with green and red emision respectively), assembly cycle number, and sequence. Moreover, energy transfer between CdTe‐535 QDs and CdTe‐635 QDs occurs based on the fluorescence resonance energy transfer (FRET), which greatly enhances the fluorescence efficiency of CdTe‐635 QDs. In addition, a theoretical study based on the Förster theory and molecular dynamics (MD) simulations demonstrates that CdTe QDs/LDH UTFs exhibit superior capability of energy transfer owing to the ordered dispersion of QDs in the 2D LDH matrix, which agrees well with the experimental results. Therefore, this provides a facile approach for the design and fabrication of inorganic‐inorganic luminescent UTFs with largely enhanced luminescence efficiency as well as stability, which can be potentially applied in multicolor optical and optoelectronic devices.  相似文献   

8.
As the development in self‐assembly of nanoparticles, a main question is directed to whether the supercrystalline structure can facilitate generation of collective properties, such as coupling between adjacent nanocrystals or delocalization of exciton to achieve band‐like electronic transport in a 3D assembly. The nanocrystal surfaces are generally passivated by insulating organic ligands, which block electronic communication of neighboring building blocks in nanoparticle assemblies. Ligand removal or exchange is an operable strategy for promoting electron transfer, but usually changes the surface states, resulting in performance alteration or uncontrollable aggregation. Here, 3D, supercompact superparticles with well‐defined superlattice domains through a thermally controlled emulsion‐based self‐assembly method is fabricated. The interparticle spacing in the superparticles shrinks to ≈0.3 nm because organic ligands lie prone on the nanoparticle surface, which are sufficient to overcome the electron transfer barrier. The ordered and compressed superstructures promote coupling and electronic energy transfer between CdSSe quantum dots (QDs). Therefore, the acquired QD superparticles exhibit different optical properties and enhanced photoelectric activity compared to individual QDs.  相似文献   

9.
Molecularly directed self‐assembly has the potential to become a nanomanufacturing technology if the critical factors governing the kinetics and yield of defect‐free self‐assembled structures can be understood and controlled. The kinetics of streptavidin‐functionalized quantum dots binding to biontinylated DNA origami are quantitatively evaluated and to what extent the reaction rate and binding efficiency are controlled by the valency of the binding location, the biotin linker length, and the organization, and spacing of the binding locations on the DNA is shown. Yield improvement is systematically determined as a function of the valency of the binding locations and as a function of the quantum dot spacing. In addition, the kinetic studies show that the binding rate increases with increasing linker length, but that the yield saturates at the same level for long incubation times. The forward and backward reaction rate coefficients are determined using a nonlinear least squares fit to the measured binding kinetics, providing considerable physical insight into the factors governing this type of self‐assembly process. It is found that the value of the dissociation constant, Kd, for the DNA–nanoparticle complex considered here is up to seven orders of magnitude larger than that of the native biotin–streptavidin complex. This difference is attributed to the combined effect that the much larger size of the DNA origami and the quantum dot have on the translational and rotational diffusion constants.  相似文献   

10.
Self‐assembled membranes offer a promising alternative for conventional membrane fabrication, especially in the field of ultrafiltration. Here, a new pore‐making strategy is introduced involving stimuli responsive protein‐polymer conjugates self‐assembled across a large surface area using drying‐mediated interfacial self‐assembly. The membrane is flexible and assembled on porous supports. The protein used is the cage protein ferritin and resides within the polymer matrix. Upon denaturation of ferritin, a pore is formed which intrinsically is determined by the size of the protein and how it resides in the matrix. Due to the self‐assembly at interfaces, the membrane constitutes of only one layer resulting in a membrane thickness of 7 nm on average in the dry state. The membrane is stable up to at least 50 mbar transmembrane pressure, operating at a flux of about 21 000–25 000 L m?2 h?1 bar?1 and displayed a preferred size selectivity of particles below 20 nm. This approach diversifies membrane technology generating a platform for “smart” self‐assembled membranes.  相似文献   

11.
Isooctane dispersions of discrete isometric BaCrO4 nanoparticles or self‐assembled linear chains of prismatic BaCrO4 nanoparticles were added as surfactant‐coated seed crystals/nanostructures to Na2CrO4/NaAOT/Ba(AOT)2/isooctane microemulsion reaction solutions prepared at w = 10 with molar ratios favoring the de novo synthesis of either nanoparticle chains ([Ba2+]/ [CrO42–] = 1:1) or isolated nanoparticles ([Ba2+]/[CrO42–] = 1:5.5). Addition of BaCrO4 nanoparticles or chains under particle‐ or chain‐producing conditions, respectively, resulted in preferential growth of the seeds with retention of particle morphology and nanostructure architecture. In contrast, addition of linear chains to microemulsion reaction solutions under particle‐producing conditions resulted in disruption of the seed nanostructure and overgrowth of the released prismatic nanoparticles to produce discrete oval‐shaped or cuboidal nanocrystals depending on the seed concentration used. Discrete faceted nanoparticles were also produced by seed‐assisted synthesis when isometric nanoparticles were added at relatively high concentrations to chain‐producing microemulsion reaction solutions; however, decreasing the seed population resulted in intact self‐assembled linear chains and superlattices that consisted of interlinked prismatic nanoparticles with end‐capped pseudo‐hexagonal morphology. Growth of the seeds and their assembly/disassembly was consistent with a model of coupled synthesis and self‐organization based on the strength of electrostatic interactions at the surfactant‐crystal interface. The results suggest that microemulsion‐based processes could be of general importance for controlling the secondary growth of pre‐organized nanoparticle‐based superstructures, as well as the morphological refinement of their constituent building blocks.  相似文献   

12.
Highly efficient, visible‐light‐induced H2 generation can be achieved without the help of a Pt cocatalyst by new hybrid photocatalysts, in which CdS quantum dots (QDs) (particle size ≈2.5 nm) are incorporated in the porous assembly of sub‐nanometer‐thick layered titanate nanosheets. Due to the very‐limited crystal dimension of component semiconductors, the electronic structure of CdS QDs is strongly coupled with that of the layered titanate nanosheets, leading to an efficient electron transfer between them and the enhancement of the CdS photostability. As a consequence of the promoted electron transfer, the photoluminescence of CdS QDs is nearly quenched after hybridization, indicating the almost‐suppression of electron‐hole recombination. These Pt‐cocatalyst‐free, CdS‐layered titanate nanohybrids show much‐higher photocatalytic activity for H2 production than the precursor CdS QDs and layered titanate, which is due to the increased lifetime of the electrons and holes, the decrease of the bandgap energy, and the expansion of the surface area upon hybridization. The observed photocatalytic efficiency of these Pt‐free hybrids (≈1.0 mmol g?1 h?1) is much greater than reported values of other Pt‐free CdS‐TiO2 systems. This finding highlights the validity of 2D semiconductor nanosheets as effective building blocks for exploring efficient visible‐light‐active photocatalysts for H2 production.  相似文献   

13.
A label‐free, enzyme‐responsive nanosystem that uses a DNA/single‐walled carbon nanotube (SWNT) assembly as the substrate is demonstrated for the sensitive, universal detection of restriction and nonrestriction endonucleases as well as methyltransferases in a homogeneous solution on the basis of light scattering (LS) of carbon nanotubes. This protocol is based on the different binding affinities of SWNTs to single‐ and double‐stranded DNA. This difference can lead to different LS signals that can be used for the detection of nuclease cleavage activity. The assay only requires a label‐free oligonucleotide probe, significantly reducing the typical cost. The LS technique and the use of a nuclease‐specific oligonucleotide probe impart extraordinarily high sensitivity and selectivity. This light scattering assay is universal and label‐free with a detection limit of 5 × 10?6 U μL?1 for S1 nuclease, 1 × 10?4 U μL?1 for EcoRI endonuclease, and 1 × 10?2 U μL?1 for EcoRI methylase. In principle, this assay can be used to detect any kind of nuclease by simply changing the DNA sequences of the specific probe.  相似文献   

14.
Here, a novel method of immobilizing proteins with well‐defined orientation directly on liquid crystal surfaces that allow subsequent real‐time imaging of specific protein–protein binding events on these surfaces is reported. Self‐assembly of nitrilotriacetic acid terminated amphiphiles loaded with Ni2+ ions at aqueous‐liquid crystal interface creates a surface capable of immobilizing histidine‐tagged ubiquitin through complex formation between Ni2+ and histidine. When these surfaces containing immobilized histidine‐tagged ubiquitin are exposed to anti‐ubiquitin antibody, the spatial and temporal of specific protein–protein binding events trigger orientational transitions of liquid crystals. As a result, sharp liquid crystal optical switching from dark to bright can readily be observed under polarized lighting. The protein–protein binding can be observed within seconds and only requires nanogram quantities of proteins. This work demonstrates a simple strategy to immobilize proteins with well‐defined orientation on liquid crystal surfaces for real‐time and label‐free detection of specific protein–protein binding events, which may find use in biomedical diagnostics.  相似文献   

15.
Rational assembly of carbon nanostructures into large‐area films is a key step to realize their applications in ubiquitous electronics and energy devices. Here, a self‐assembly methodology is devised to organize diverse carbon nanostructures (nanotubes, dots, microspheres, etc.) into homogeneous films with potentially infinite lateral dimensions. On the basis of studies of the redox reactions in the systems and the structures of films, the spontaneous deposition of carbon nanostructures onto the surface of the copper substrate is found to be driven by the electrical double layer between copper and solution. As a notable example, the as‐assembled multiwalled carbon nanotube (MWCNT) films display exceptional properties. They are a promising material for flexible electronics with superior electrical and mechanical compliance characteristics. Finally, two kinds of all‐solid‐state supercapacitors based on the self‐assembled MWCNT films are fabricated. The supercapacitor using carbon cloth as the current collector delivers an energy density of 3.5 Wh kg?1 and a power density of 28.1 kW kg?1, which are comparable with the state‐of‐the‐art supercapacitors fabricated by the costly single‐walled carbon nanotubes and arrays. The supercapacitor free of foreign current collector is ultrathin and shows impressive volumetric energy density (0.58 mWh cm?3) and power density (0.39 W cm?3) too.  相似文献   

16.
A general polyelectrolyte‐mediated self‐assembly technique is adopted to prepare multifunctional mesoporous nanostructures as an effective biological bimodal imaging probe and magnetically targeted anticancer drug (doxorubicin) delivery systems (DDSs). A positively charged polyelectrolyte (PAH) and negatively charged fluorescent quantum dots (QDs) are successfully assembled onto the surface of ellipsoidal Fe3O4@SiO2@mSiO2 composite nanostructures to combine the merits of tunable fluorescent/magnetic properties, mesoporous nanostructures for drug loading, and the uniform ellipsoidal morphology for enhanced uptake by cancer cells. The resultant nanoellipsoids are homogeneously coated with four layers of PAH/QDs, with an additional PAH layer to make the ellipsoidal surface positively charged. This acts to enhance cellular uptake, which is driven by electrostatic interactions between the positive nanoparticle surface and the negative cell surface. The high biocompatibility of the achieved multifunctional nanoellipsoids is demonstrated by a cell‐cytotoxicity assay, hemolyticity against human red blood cells, and coagulation evaluation of fresh human blood plasma after exposure to the nanoparticles. Moreover, confocal microscopy and bio‐TEM observations show that the cell uptake of nanocarriers is dose‐dependent, and the nanoparticles accumulate mostly in the cytoplasm. The excellent capability of the nanocarriers as contrast agents for MRI is demonstrated by the relatively high r2 value (143 mM?1s?1) and preliminary in vivo characterization. More importantly, the doxorubicin‐loaded DDSs show higher cytotoxicity than the free doxorubicin drug as contributed by the intracellular release pathway of doxorubicin from the DDSs, indicating the potential application of the obtained multifunctional mesoporous nanoellipsoids as highly effective bimodal imaging probes and DDSs for cancer diagnosis and chemotherapy, simultaneously.  相似文献   

17.
The development of a solution‐deposited up‐converted distributed feedback laser prototype is presented. It employs a sol–gel silica/germania soft‐lithographed microcavity and CdSe–CdZnS–ZnS quantum dot/sol–gel zirconia composites as optical gain material. Characterization of the linear and nonlinear optical properties of quantum dots establishes their high absorption cross‐sections in the one‐ and two‐ photon absorption regimes to be 1 × 10?14 cm2 and 5 × 104 GM, respectively. In addition, ultrafast transient absorption dynamics measurements of the graded seal quantum dots reveal that the Auger recombination lifetime is 220 ps, a value two times higher than that of the corresponding CdSe core. These factors enable the use of such quantum dots as optically pumped gain media, operating in the one‐ and two‐photon absorption regime. The incorporation of CdSe–CdZnS–ZnS quantum dots within a zirconia host matrix affords a quantum‐dot ink that can be directly deposited on our soft‐lithographed distributed feedback grating to form an all‐solution‐processed microcavity laser.  相似文献   

18.
Nonviral gene carriers based on electrostatic interaction, encapsulation, or absorption require a large amount of polymer carrier to achieve reasonable transfection efficiencies. With cationic nanoparticles, for example, genes interact only with the surface of the nanoparticles, resulting in a low surface area to volume ratio (SA/V = 3/r). A large volume of carrier, therefore, is required to deliver a small copy number of genes. In this study, it is demonstrated that a nano‐self‐assembly of nucleic acids transfects itself into cells spontaneously, without the need for a gene carrier. The cellular uptake of this nanoassembly occurs through a number of endocytosis mechanisms. Once within the cell, the nanoassembly can escape endolysosomal vesicles and facilitate gene transfection. This nano‐self‐assembly consisting of zinc and plasmid DNA or siRNA, termed the Zn/DNA or Zn/siRNA nanocluster, is formed through the binding of Zn2+ ions to the phosphate groups of nucleic acids. The method described in this paper represents a new platform for carrier‐free gene delivery that can be used to deliver any plasmid DNA or siRNA without the requirement for a specific modification in the nucleic acids or complicated steps to prepare dense particles.  相似文献   

19.
Highly sensitive dual‐mode labeled detection of biotin in well‐characterized porous silicon (PSi) films using colloidal quantum dots (QDs) as signal amplifiers are demonstrated. Optimization of the PSi platform for targeted QD infiltration and immobilization is carried out by characterizing and tuning the porosity, film depth, and pore size. Binding events of target QD‐biotin conjugates with streptavidin probes immobilized on the pore walls are monitored by reflective interferometric spectroscopy and fluorescence measurements. QD labeling of the target biotin molecules enables detection based on a distinct fluorescent signal as well as a greater than 5‐fold enhancement in the measured spectral reflectance fringe shift and a nearly three order of magnitude improvement in the detection limit for only 6% surface area coverage of QDs inside the porous matrix. Utilizing the QD signal amplifiers, an exceptional biotin detection limit of ≈6 fg mm?2 is demonstrated with sub‐fg mm?2 detection limits achievable.  相似文献   

20.
Negatively charged gold nanoparticles (AuNPs) and a polyelectrolyte (PE) have been assembled alternately on a polystyrene (PS) colloid by a layer‐by‐layer (LBL) self‐assembly technique to form three‐dimensional (Au/PAH)4/(PSS/PAH)4 multilayer‐coated PS spheres (Au/PE/PS multilayer spheres). The Au/PE/PS multilayer spheres have been used to modify a boron‐doped diamond (BDD) electrode. Cyclic voltammetry is utilized to investigate the properties of the modified electrode in a 1.0 M KCl solution that contains 5.0 × 10?3 M K3Fe(CN)6, and the result shows a dramatically decreased redox activity compared with the bare BDD electrode. The electrochemical behaviors of dopamine (DA) and ascorbic acid (AA) on the bare and modified BDD electrode are studied. The cyclic voltammetric studies indicate that the negatively charged, three‐dimensional Au/PE/PS multilayer sphere‐modified electrodes show high electrocatalytic activity and promote the oxidation of DA, whereas they inhibit the electrochemical reaction of AA, and can effectively be used to determine DA in the presence of AA with good selectivity. The detection limit of DA is 0.8 × 10?6 M in a linear range from 5 × 10?6 to 100 × 10?6 M in the presence of 1 × 10?3 M AA.  相似文献   

设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号