Fabrication of LaCl3‐containing nanofiber scaffolds and their application in skin wound healing

Poly(?‐caprolactone) (PCL)/gelatin (GE) nanofiber scaffolds with varying concentrations of lanthanum chloride (LaCl₃, from 0 to 25 mM) were fabricated by electrospinning. The scaffolds were characterized by scanning electron microscopy, contact angle and porosity measurements, mechanical strength tests, and in vitro degradation studies. In vitro cytotoxicity and cell adhesion and proliferation studies were performed to assess the biocompatibility of the scaffolds, and in vivo wound healing studies were conducted to assess scaffold applications in the clinic. All prepared scaffolds were noncytotoxic, and the growth of adipose tissue–derived stem cells on LaCl₃‐containing scaffolds was better than on the pure PCL/GE scaffold. Cell proliferation studies showed the greatest cell growth in the PCL/GE/LaCl₃ scaffolds. Further, in vivo studies proved that the PCL/GE/LaCl₃ scaffolds can promote wound healing. The results suggest that nanofiber scaffolds containing LaCl₃ promote cell proliferation and have good biocompatibility, and thus potential for application in the treatment of skin wounds. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46672.     

Surface‐engineered hydroxyapatite nanocrystal/ poly(ε‐caprolactone) hybrid scaffolds for bone tissue engineering

To achieve novel polymer/bioceramic composite scaffolds for use in materials for bone tissue engineering, we prepared organic/inorganic hybrid scaffolds composed of biodegradable poly(ε‐caprolactone) (PCL) and hydroxyapatite (HA), which has excellent biocompatibility with hard tissues and high osteoconductivity and bioactivity. To improve the interactions between the scaffolds and osteoblasts, we focused on surface‐engineered, porous HA/PCL scaffolds that had HA molecules on their surfaces and within them because of the biochemical affinity between the biotin and avidin molecules. The surface modification of HA nanocrystals was performed with two different methods. Using Fourier transform infrared, X‐ray diffraction, and thermogravimetric analysis measurements, we found that surface‐modified HA nanocrystals prepared with an ethylene glycol mediated coupling method showed a higher degree of coupling (%) than those prepared via a direct coupling method. HA/PCL hybrid scaffolds with a well‐controlled porous architecture were fabricated with a gas‐blowing/particle‐leaching process. All HA/PCL scaffold samples exhibited approximately 80–85% porosity. As the HA concentration within the HA/PCL scaffolds increased, the porosity of the HA/PCL scaffolds gradually decreased. The homogeneous immobilization of biotin‐conjugated HA nanocrystals on a three‐dimensional, porous scaffold was observed with confocal microscopy. According to an in vitro cytotoxicity study, all scaffold samples exhibited greater than 80% cell viability, regardless of the HA/PCL composition or preparation method. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Poly(ε‐caprolactone) composite scaffolds loaded with gentamicin‐containing β‐tricalcium phosphate/gelatin microspheres for bone tissue engineering applications

In this study, novel poly(ε‐caprolactone) (PCL) composite scaffolds were prepared for bone tissue engineering applications, where gentamicin‐loaded β‐tricalcium phosphate (β‐TCP)/gelatin microspheres were added to PCL. The effects of the amount of β‐TCP/gelatin microspheres added to the PCL scaffold on various properties, such as the gentamicin release rate, biodegradability, morphology, mechanical strength, and pore size distribution, were investigated. A higher amount of filler caused a reduction in the mechanical properties and an increase in the pore size and led to a faster release of gentamicin. Human osteosarcoma cells (Saos‐2) were seeded on the prepared composite scaffolds, and the viability of cells having alkaline phosphatase (ALP) activity was observed for all of the scaffolds after 3 weeks of incubation. Cell proliferation and differentiation enhanced the mechanical strength of the scaffolds. Promising results were obtained for the development of bone cells on the prepared biocompatible, biodegradable, and antimicrobial composite scaffolds. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40110.     

Morphology,wettability, and mechanical properties of polycaprolactone/hydroxyapatite composite scaffolds with interconnected pore structures fabricated by a mini‐deposition system

A new mini‐deposition system (MDS) was developed to fabricate scaffolds with interconnected pore structures and anatomical geometry for bone tissue engineering. Polycaprolactone/hydroxyapatite (PCL/HA) composites with varying hydroxyapatite (HA) content were adopted to manufacture scaffolds by using MDS with a porosity of 54.6%, a pore size of 716 μm in the x‐y plane, and 116 μm in the z direction. The water uptake ratio and compressive modulus of PCL/HA composite scaffold increase from 8 to 39% and from 26.5 to 49.8 MPa, respectively, as the HA content increases from 0 to 40%. PCL/HA composite scaffolds have better wettability and mechanical properties than pure PCL scaffold. A PCL/HA composite scaffold for mandible bone repair was successfully fabricated with both interconnected pore structures and anatomical shape to demonstrate the versatility of MDS. POLYM. ENG. SCI., 2012. © 2012 Society of Plastics Engineers     

Reinforcement of electrospun poly(ε‐caprolactone) scaffold using diopside nanopowder to promote biological and physical properties

Considerable efforts have been devoted toward the development of electrospun scaffolds based on poly(ε‐caprolactone) (PCL) for bone tissue engineering. However, most of previous scaffolds have lacked the structural and mechanical strength to engineer bone tissue constructs with suitable biological functions. Here, we developed bioactive and relatively robust hybrid scaffolds composed of diopside nanopowder embedded PCL electrospun nanofibers. Incorporation of various concentrations of diopside nanopowder from 0 to 3 wt % within the PCL scaffolds notably improved tensile strength (eight‐fold) and elastic modulus (two‐fold). Moreover, the addition of diopside nanopowder significantly improved bioactivity and degradation rate compared to pure PCL scaffold which might be due to their superior hydrophilicity. We investigated the proliferation and spreading of SAOS‐II cells on electrospun scaffolds. Notably, electrospun PCL‐diopside scaffolds induced significantly enhanced cell proliferation and spreading. Overall, we concluded that PCL‐diopside scaffold could potentially be used to develop clinically relevant constructs for bone tissue engineering. However, the extended in vivo studies are essential to evaluate the role of PCL‐diopside fibrous scaffolds on the new bone growth and regeneration. Therefore, in vivo studies will be the subject of our future work. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134 , 44433.     

Fabrication and characterization of hydrophilic poly(ε‐caprolactone)/pluronic P123 electrospun fibers

Poly(ε‐caprolactone) (PCL) has been widely investigated for tissue engineering applications because of its good biocompatibility, biodegradability, and mechanical properties; however hydrophobic nature of PCL has been a colossal obstacle toward achieving scaffolds which offer satisfactory cell attachment and proliferation. To produce highly hydrophilic electrospun fibers, PCL was blended with pluronic P123 (P123) and the resulted electrospun scaffolds physiochemical characteristics such as fiber morphology, thermal behavior, crystalline structure, mechanical properties, and wettability were investigated. Moreover molecular dynamic (MD) simulation was assigned to evaluate the blended and neat PCL/water interactions. Presence of P123 at the surface of electrospun blended fibers was detected using ATR‐FTIR analysis. P123 effectiveness in improving the hydrophilicity of the scaffolds was demonstrated by water contact angel which experienced a sharp decrease from 132° corresponding to the neat PCL to almost 0° for all blended samples. Also a steady increase in water uptake ratio was observed for blended fibers as P123 content increased. The 90/10 blend ratio had the maximum tensile strength, elongation at break and crystallinity percentage. Therefore 90/10 blend ratio of PCL/P123 can balance the mechanical properties and bulk hydrophilicity of the resulted electrospun scaffold and would be a promising candidate for tissue engineering application. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43345.     

Bone morphogenetic protein‐2 immobilization on porous PCL‐BCP‐Col composite scaffolds for bone tissue engineering

The objective of this study was to develop novel porous composite scaffolds for bone tissue engineering through surface modification of polycaprolactone–biphasic calcium phosphate‐based composites (PCL–BCP). PCL–BCP composites were first fabricated with salt‐leaching method followed by aminolysis. Layer by layer (LBL) technique was then used to immobilize collagen (Col) and bone morphogenetic protein (BMP‐2) on PCL–BCP scaffolds to develop PCL–BCP–Col–BMP‐2 composite scaffold. The morphology of the composite was examined by scanning electron microscopy (SEM). The efficiency of grafting of Col and BMP‐2 on composite scaffold was measured by X‐ray photoelectron spectroscopy (XPS) and Fourier transform infrared spectroscopy (FTIR). Both XPS and FTIR confirmed that Col and BMP‐2 were successfully immobilized into PCL–BCP composites. MC3TC3‐E1 preosteoblasts cells were cultivated on composites to determine the effect of Col and BMP‐2 immobilization on cell viability and proliferation. PCL–BCP–Col–BMP‐2 showed more cell attachment, cell viability, and proliferation bone factors compared to PCL–BCP‐Col composites. In addition, in vivo bone formation study using rat models showed that PCL–BCP–Col–BMP‐2 composites had better bone formation than PCL–BCP‐Col scaffold in critical size defect with 4 weeks of duration. These results suggest that PCL–BCP–Col–BMP‐2 composites can enhance bone regeneration in critical size defect in a rat model with 4 weeks of duration. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45186.     

β-TCP scaffold coated with PCL as biodegradable materials for dental applications

Requirements for an ideal scaffold include biocompatibility, biodegradability, mechanical strength and sufficient porosity and pore dimensions. Beta tricalcium phosphate (β-TCP) has competent biocompatibility and biodegradability, but has low mechanical strength because of its porous structure. Polycaprolactone (PCL) is a biodegradable polymer with elastic characteristics and good biocompatibility. In this study, β-TCP/PCL composites were prepared in different ratio and their morphology, phase content, mechanical properties, biodegradation and biocompatibility were investigated. After coating, surfaces of β-TCP scaffolds were covered with the PCL while some of the pores were partially clogged. The compression and bending strength of β-TCP scaffolds were significantly enhanced by PCL coating. The degradation rate of the scaffold in Tris buffer was reduced with higher content of the PCL coating. MTT and ALP assays showed that the osteoblast cells could proliferate and differentiate on PCL coated scaffolds as well as on bare β-TCP scaffolds. Based on the comprehensive analysis achieved in this study, it is concluded that the β-TCP/PCL composite scaffold fabricated with 40% β-TCP and 5% PCL exhibits optimum properties suitable for dental applications.     

Dual drug release from CO2‐infused nanofibers via hydrophobic and hydrophilic interactions

This study investigated the effects of hydrophobic–hydrophilic interactions on dual drug release from CO₂‐infused nanofibers scaffolds (PCL, PCL–gelatin, and PCL “core” PCL–gelatin “shell”) using BODIPY 493/503 and Rhodamine B fluorescent dyes as drug models. Favorable dye–scaffold interactions increased total dye loading and promoted steady, more linear release. Unfavorable dye–scaffold interactions reduced overall loading and led to a greater burst release of dye. However, when CO₂ was used to infuse dye into an unfavorable scaffold, the changes in loading and release were less pronounced. When two dyes were infused, these behaviors were accentuated due to interactions between the dissolved forms of the dyes. Core–shell composite nanofibers displayed radically different release properties versus pure PCL–gelatin fibers when treated with dyes via CO₂ infusion. Dye release from core–shell scaffolds was highly sensitive to both interactions with scaffolds and the phase of CO₂ used to infuse the compounds of interest. By using different phases of CO₂ to partition dyes into hydrophobic and hydrophilic sections of core–shell nanofibers, such interactions can be manipulated to develop a bimodal drug release system with potential application in drug delivery or tissue engineering. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42571.     

Influence of lactic acid on degradation and biocompatibility of electrospun poly(ε‐caprolactone) fibers

Electrospinning of a poly(ε‐caprolactone) (PCL)/lactic acid (LA) blend was investigated to fabricate electrospun PCL fibers with improved biodegradability and biocompatibility for biomedical applications. Simple blending of PCL solution with various amounts of LA was used for electrospinning, and the physicochemical properties of the as‐fabricated mat were evaluated using various techniques. Scanning electron microscopy showed that fiber diameter decreased with increasing amount of LA. Fourier transform infrared spectroscopy and thermogravimetric analysis also revealed that LA was successfully incorporated in PCL fibers. The presence of LA can accelerate the biodegradation of PCL fibers and enhance the hydrophilicity of a membrane. The adhesion, viability and proliferation properties of osteoblast cells on the PCL/LA composite fibers were analyzed using in vitro cell compatibility tests which showed that LA can increase the cell compatibility of PCL fibers. Additionally, subsequent conversion of LA into calcium lactate by neutralization with calcium base can provide Ca²⁺ ions on the fiber surface to promote the nucleation of CaPO₄ particles. © 2013 Society of Chemical Industry     

Fabrication and Evaluation of Polycaprolactone–Poly(hydroxybutyrate) or Poly(3‐Hydroxybutyrate‐co‐3‐Hydroxyvalerate) Dual‐Leached Porous Scaffolds for Bone Tissue Engineering Applications

Polycaprolactone (PCL) blend with poly(hydroxybutyrate) (PHB) or poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) dual‐leached scaffolds are prepared by using the solvent casting and salt–polymer‐leaching technique. The blending of the PHB and PHBV in PCL scaffolds results in decreased porosities of the scaffolds, and the water absorption capacities of the scaffolds also decrease. The compressive modulus of the PCL–PHB and PCL–PHBV dual‐leached scaffolds is greatly increased by the blending of PHB or PHBV matrix. An indirect cytotoxicity evaluation of all scaffolds with mouse fibroblastic cells (L929) and mouse calvaria‐derived preosteoblastic cell (MC3T3‐E1) indicates that all dual‐leached scaffolds are posed as nontoxic to cells. Both PCL–PHB and PCL–PHBV dual‐leached scaffolds are supported by the attachment of MC3T3‐E1 at significantly higher levels to tissue culture polystyrene plate (TCPS) and are able to support the proliferation of MC3T3‐E1 at higher levels to that cells on TCPS and PCL scaffolds. For mineralization, cells cultured on surfaces of PCL–PHB and PCL–PHBV dual‐leached scaffolds show higher mineral deposition than on TCPS and PCL scaffold.

     

Evaluation of polycaprolactone − poly‐D,L‐lactide copolymer as biomaterial for breast tissue engineering

The potential of the copolymer polycaprolactone‐co‐ poly‐d ,l ‐lactic acid (PCLLA ) as a biomaterial for scaffold‐based therapy for breast tissue engineering applications was assessed. First, the synthesized PCLLA was evaluated for its processability by means of additive manufacturing (AM ). We found that the synthesized PCLLA could be fabricated into scaffolds with an overall gross morphology and porosity similar to that of polycaprolactone. The PCLLA scaffolds possessed a compressive Young's modulus (ca 46 kPa ) similar to that of native breast (0.5 ? 25 kPa ), but lacked thermal stability and underwent thermal degradation during the fabrication process. The PCLLA scaffolds underwent rapid degradation in vitro which was characterized by loss of the scaffolds' mechanical integrity and a drastic decrease in mass‐average molar mass (M _w) and number‐average molar mass (M _n) after 4 weeks of immersion in phosphate buffer solution maintained at 37 °C. The tin‐catalysed PCLLA scaffold was also found to have cytotoxic effects on cells. Although the initial mechanical properties of the PCLLA scaffolds generally showed potential for applications in breast tissue regeneration, the thermal stability of the copolymer for AM processes, biocompatibility towards cells and degradation rate is not satisfactory at this stage. Therefore, we conclude that research efforts should be geared towards fine‐tuning the copolymer synthesizing methods. © 2016 Society of Chemical Industry     

One‐Pot Fabrication of Poly(ε‐Caprolactone)‐Incorporated Bovine Serum Albumin/Calcium Alginate/Hydroxyapatite Nanocomposite Scaffolds by High Internal Phase Emulsion Templates

In this work, the authors report an effective one‐pot method to prepare poly(ε‐caprolactone) (PCL)‐incorporated bovine serum albumin (BSA)/calcium alginate/hydroxyapatite (HAp) nanocomposite (NC) scaffolds by templating oil‐in‐water high internal phase emulsion (HIPE), which includes alginate, BSA, and HAp in water phase and PCL in oil phase. The water phase of HIPEs is solidified to form hydrogels containing emulsion droplets via gelation of alginate induced by Ca²⁺ ions released from HAp. And the prepared hydrogels are freeze‐dried to obtain PCL‐incorporated porous scaffolds. The obtained scaffolds possess interconnected pore structures. Increasing PCL concentration clearly enhances the compressive property and BSA stability, decreases the swelling ratio of scaffolds, which assists in improving the scaffold stability. The anti‐inflammatory drug ibuprofen can be highly efficiently loaded into scaffolds and released in a sustained rate. Furthermore, mouse bone mesenchymal stem cells can successfully proliferate on the scaffolds, proving the biocompatibility of scaffolds. All results show that the PCL‐incorporated NC scaffolds possess promising potentials in tissue engineering application.

     

3D printing of polycaprolactone/bioactive glass composite scaffolds for in situ bone repair

3D printing technology can fabricate customized scaffolds based on patient-derived medical images, so it has attracted much attention in the field of developing bone repair scaffolds. Polycaprolactone (PCL) is a suitable polymer for preparing bone repair scaffolds because of its good biocompatibility, thermal stability, excellent mechanical properties and degradable properties. However, PCL is a bioinert material and cannot induce new bone formation at the defect site. In this study, the bioactive material 58s bioactive glass was mixed into PCL to form PCL/bioactive glass composite material. The results of contact angle showed that the hydrophilicity of the scaffold was significantly enhanced with the increase of bioactive glass content. In vitro experiment results showed that, with the increase of bioactive glass content, cell adhesion and proliferation were enhanced, the expression levels of Runx2 and Collagen I(COL-I) were upregulated. The experimental results of in vivo radial defect repair in rats also showed that the effect of bone repair was improved with the increase of bioactive glass content. In conclusion, PCL customized bone repair scaffold containing 20% bioactive glass has widely potential used in the field of clinical bone repair.     

Surface‐modified pliable PDLLA/PCL/β‐TCP scaffolds as a promising delivery system for bone regeneration

Surface‐modified poly(d , l ‐lactide)/polycaprolactone/β‐tricalcium phosphate complex scaffold was fabricated in this study and we hypothesized that pliable and mechanical strong scaffold would be achieved by regulation of ternary compositions; while superficial modification strategy conduced to preserve and controlled‐release of bioactive growth factors. Properties of the composite scaffolds were systematically investigated, including mechanical properties, surface morphology, porosity, wettability, and releasing behavior. Moreover, the representative cytokine, recombinant human bone morphogenetic protein‐2 (rhBMP‐2), was loaded and implanted into muscular pouch of mouse to assess bone formation in vivo. Improved osteogenesis was achieved ascribed to both amplified β‐tricalcium phosphate (β‐TCP) content and retarded initial burst release. Particularly, scaffold doped with hydroxypropyl methylcellulose (HPMC) displayed optimal osteogenic capability. The results indicated that the PDLLA/PCL/β‐TCP complex scaffold along with HPMC‐coating and rhBMP‐2 loading was a promising candidate for bone regeneration. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40951.     

Assessment of cell proliferation in knitting scaffolds with respect to pore‐size heterogeneity,surface wettability,and surface roughness

In this study, various types of poly(ε‐caprolactone) (PCL) knitting scaffolds were fabricated and analyzed to assess the cell‐culturing characteristics of knitting scaffolds with respect to pore‐size heterogeneity, surface wettability, and surface roughness. First, control knitting scaffolds were fabricated using 150‐µm‐diameter PCL monofilaments. Using chloroform and NaOH, PCL knitting scaffolds with varying roughness, pore‐size heterogeneity, and surface wettability were fabricated. Cell‐culture assessments were performed on these six types of PCL knitting scaffolds. Saos‐2 cells were used for cell assessments and cultured for 14 days on each scaffold. Consequently, heterogeneous pore‐size distribution and high surface wettability were found to enhance cell proliferation in knitting scaffolds. In addition, for highly hydrophobic knitting scaffolds exhibiting water contact angles greater than 110 degrees, smaller surface roughness was found to enhance cell proliferation. According to this study, in the case of knitting scaffold, NaOH‐treated knitting scaffold, without any control for the pore‐size homogenization, could be a candidate as the optimal knitting scaffold. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42566.     

Synthesis,characterization and biocompatibility of novel biodegradable poly[((R)‐3‐hydroxybutyrate)‐block‐(D,L‐lactide)‐block‐(ε‐caprolactone)] triblock copolymers

BACKGROUND: Biodegradable block copolymers have attracted particular attention in both fundamental and applied research because of their unique chain architecture, biodegradability and biocompatibility. Hence, biodegradable poly[((R )‐3 ‐hydroxybutyrate)‐block‐(D ,L ‐lactide)‐block‐(ε‐caprolactone)] (PHB‐PLA‐PCL) triblock copolymers were synthesized, characterized and evaluated for their biocompatibility. RESULTS: The results from nuclear magnetic resonance spectroscopy, gel permeation chromatography and thermogravimetric analysis showed that the novel triblock copolymers were successfully synthesized. Differential scanning calorimetry and wide‐angle X‐ray diffraction showed that the crystallinity of PHB in the copolymers decreased compared with methyl‐PHB (LMPHB) oligomer precursor. Blood compatibility experiments showed that the blood coagulation time became longer accompanied by a reduced number of platelets adhering to films of the copolymers with decreasing PHB content in the triblocks. Murine osteoblast MC3T3‐E1 cells cultured on the triblock copolymer films spread and proliferated significantly better compared with their growth on homopolymers of PHB, PLA and PCL, respectively. CONCLUSION: For the first time, PHB‐PLA‐PCL triblock copolymers were synthesized using low molecular weight LMPHB oligomer as the macroinitiator through ring‐opening polymerization with D ,L ‐lactide and ε‐caprolactone. The triblock copolymers exhibited flexible properties with good biocompatibility; they could be developed into promising biomedical materials for in vivo applications. Copyright © 2008 Society of Chemical Industry     

Characterization of biodegradable polymers by inverse gas chromatography. II. Blends of amylopectin and poly(ε‐caprolactone)

Amylopectin (AP), a potato‐starch‐based polymer with a molecular weight of 6,000,000 g/mol, was blended with poly(ε‐caprolactone) (PCL) and characterized with inverse gas chromatography (IGC), differential scanning calorimetry (DSC), and X‐ray diffraction (XRD). Five different compositions of AP–PCL blends ranging from 0 to 100% AP were studied over a wide range of temperatures (80–260°C). Nineteen solutes (solvents) were injected onto five chromatographic columns containing the AP–PCL blends. These solutes probed the dispersive, dipole–dipole, and hydrogen‐bonding interactions, acid–base characteristics, wettability, and water uptake of the AP–PCL blends. Retention diagrams of these solutes in a temperature range of 80–260°C revealed two zones: crystalline and amorphous. The glass‐transition temperature (T_g) and melting temperature (T_m) of the blends were measured with these zones. The two zones were used to calculate the degree of crystallinity of pure AP and its blends below T_m, which ranged from 85% at 104°C to 0% at T_m. IGC complemented the DSC method for obtaining the T_g and T_m values of the pure AP and AP–PCL blends. These values were unexpectedly elevated for the blends over that of pure AP and ranged from 105 to 152°C for T_g and from 166 to 210°C for T_m. The T_m values agreed well with the XRD analysis data. This elevation in the T_g and T_m values may have been due to the change in the heat capacity at T_g and the dependence of T_g on various variables, including the molecular weight and the blend composition. Polymer blend/solvent interaction parameters were measured with a variety of solutes over a wide range of temperatures and determined the solubility of the blends in the solutes. We were also able to determine the blend compatibility over a wide range of temperatures and weight fractions. The polymer–polymer interaction coefficient and interaction energy parameter agreed well on the partial miscibility of the two polymers. The dispersive component of the surface energy of the AP–PCL blends was measured with alkanes and ranged from 16.09 mJ/m² for pure AP to 38.26 mJ/m² when AP was mixed with PCL in a 50/50% ratio. This revealed an increase in the surface energy of AP when PCL was added. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 3076–3089, 2006     

Fabrication of co‐continuous poly(ε‐caprolactone)/polyglycolide blend scaffolds for tissue engineering

The apparent inability of a single biomaterial to meet all the requirements for tissue engineering scaffolds has led to continual research in novel engineered biomaterials. One method to provide new materials and fine‐tune their properties is via mixing materials. In this study, a biodegradable powder blend of poly(ε‐caprolactone) (PCL), polyglycolide (PGA), and poly(ethylene oxide) (PEO) was prepared and three‐dimensional interconnected porous PCL/PGA scaffolds were fabricated by combining cryomilling and compression molding/polymer leaching techniques. The resultant porous scaffolds exhibited co‐continuous morphologies with ～50% porosity. Mean pore sizes of 24 and 56 μm were achieved by varying milling time. The scaffolds displayed high mechanical properties and water uptake, in addition to a remarkably fast degradation rate. The results demonstrate the potential of this fabrication approach to obtain PCL/PGA blend scaffolds with interconnected porosity. In general, these results provide significant insight into an approach that will lead to the development of new composites and blends in scaffold manufacturing. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42471.     

Nanocomposites based on poly(ϵ‐caprolactone) and the montmorillonite treated with dibutylamine‐terminated ϵ‐caprolactone oligomer

Dibutylamine‐terminated ε‐caprolactone oligomers (CLOs: CLOL, CLOM, and CLOH) with number–averaged molecular weight (M_n), 500, 1300, and 2200, respectively, were synthesized by the ring‐opening polymerization of ε‐caprolactone initiated by 2‐(dibutylamino)ethanol in the presence of tin(II) 2‐ethylhexanoate. Nanocomposites based on poly(ε‐caploractone) (PCL) and the caprolactone oligomer‐treated montmorillonites (CLO‐Ms: CLOL‐M, CLOM‐M, and CLOH‐M) were prepared by melt intercalation method. The XRD and TEM analyses of the PCL composites revealed that the extent of exfoliation of the clay platelets increased with increasing molecular weight of the used CLOs. Tensile strength and modulus of the PCL/CLO‐M composites increased with increasing molecular weight of the CLO and increasing inorganic content. The tensile modulus of the PCL/CLOH‐M nanocomposite with inorganic content 5.0 wt % was three times higher than that of control PCL. Among the PCL/CLO‐M composites, the PCL/CLOM‐M composite had the highest crystallization temperature and melting temperature. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007