Adsorption behavior and radiation effects of a silica-based (Calix(4)+Dodecanol)/SiO2-P adsorbent for selective separation of Cs(I) from high level liquid waste

A macroporous silica-based (Calix[4]+Dodecanol)/SiO₂-P absorbent for separation of Cs(I) from HNO₃ solution was prepared by impregnating the 1,3-[(2,4-Diethylheptylethoxy)oxy]-2,4-crown-6-calix[4]arene and its molecule modifier 1-dodecanol into a macroporous silica/polymer composite support. To establish its application into partitioning of Cs(I) from High Level Liquid Waste (HLLW), the adsorption properties and radiation effects on the adsorbent were investigated. The adsorbent showed a relatively large distribution coefficient of Cs(I) and fast equilibrium time in simulated HLLW. Additionally, the adsorbent under the gamma-ray field was found to be able to selectively adsorb Cs(I) with similar behavior to the adsorption without irradiation up to at least 170 kGy.     

Preparation of a macroporous silica–pyridine multidentate material and its adsorption behavior for some typical elements

A new macroporous silica‐based‐polymer (SiO₂‐P) soft ligand composite material, 2,6‐bis(5,6‐di(iso‐butyl)‐1,2,4‐triazine‐3‐yl)pyridine (BDIBTP/SiO₂‐P), was synthesized by impregnation and immobilization of BDIBTP and 1‐octanol molecules into the pores of the SiO₂‐P particles. The impact of some typical alkali metal and alkaline earths Cs(I), Na(I), K(I), Rb(I), Sr(II), and Ba(II) containing in highly active liquid waste (HLW) on the adsorption of Pd(II) onto BDIBTP/SiO₂‐P was studied. It was performed by examining the effects of contact time and the HNO₃ concentration in the range of 0.3–7.0 M. BDIBTP/SiO₂‐P showed strong adsorption ability and high selectivity for Pd(II) over all the tested metals. The chromatographic partitioning of Pd(II) from a simulated HLW solution was conducted by BDIBTP/SiO₂‐P packed column. Pd(II) was effectively eluted with 0.2 M thiourea–0.1 M HNO₃. The others showed no adverse impact on separation of Pd(II). The results are beneficial to partitioning of minor actinides and Pd(II) together from HLW by BDIBTP/SiO₂‐P in the MPS process developed. © 2012 American Institute of Chemical Engineers AIChE J, 2012     

Synthesis of a Novel Macroporous Silica-Calix[4]arene-Crown Supramolecular Recognition Material and its Adsorption for Cesium and some Typical Metals in Highly Active Liquid Waste

Abstract

A novel macroporous silica-based 25,27-bis(iso-propyloxy)calix[4]arene-26,28-crown-6 (BiPCalix[4]C6) supramolecular recognition material, BiPCalix[4]C6/SiO₂-P, was synthesized. It was prepared by impregnation and the immobilization of the BiPCalix[4]C6 molecule into the pores of the macroporous SiO₂-P particles. The adsorption of Cs(I) and some typical elements Na(I), K(I), Rb(I), Sr(II), Ba(II), Ru(III), Mo(VI), La(III), and Y(III) onto the BiPCalix[4]C6/SiO₂-P material was investigated. The effects of the HNO₃ concentration, contact time, and temperature on the adsorption of the tested metals were studied. It was found that at the optimum concentration of 3.0 M HNO₃, BiPCalix[4]C6/SiO₂-P exhibited excellent adsorption ability and high selectivity for Cs(I) over all the tested elements, which showed weak or almost no adsorption except Rb(I). A pseudo-second-order model was found to be able to describe the adsorption kinetics of Cs(I). The chemical complexation of Cs(I) with BiPCalix[4]C6/SiO₂-P was considered to be the rate-controlling step. Meanwhile, the thermodynamic parameters of the Cs(I) adsorption, ΔH?, ΔG?, and ΔS? were determined. The adsorption of Cs(I) onto BiPCalix[4]C6/SiO₂-P was exothermic. It was demonstrated that in 3.0 M HNO₃, the novel macroporous BiPCalix[4]C6/SiO₂-P material shows promise for the partitioning of Cs(I) from highly active liquid waste.     

Adsorption of cesium and some typical elements on a novel solid-state macroporous silica-calix[4]arene material

25,27-Bis(1-hexyloxy)-calix[4]arene-26,28-crown-6 (HexylCalix[4]C6) was synthesized. A new macroporous silica-based composite material, HexylCalix[4]C6@SiO₂, was prepared through impregnation and immobilization of HexylCalix[4]C6 into the SiO₂-P particles. The adsorption of 17 species of typical metals onto HexylCalix[4]C6@SiO₂ in the range of 0.3–5.0 M HNO₃ was investigated. The material exhibited strong adsorption ability and excellent selectivity for Cs(I) over all the tested metals except for Rb(I) and Pd(II). The optimum HNO₃ concentration and the adsorption mechanism of Cs(I) onto the material were discussed. The solubility of HexylCalix[4]C6@SiO₂ in aqueous phase was evaluated by total organic carbon (TOC). The technical feasibility of application of Hexyl Calix[4]C6@SiO₂ in Cs(I) separation was confirmed.     

Synthesis and Characterization of a New Polymer-Based Supramolecular Recognition Material and its Adsorption for Cesium

A novel macroporous polymer-based 25,27-bis(iso-propyloxy)calix[4]arene-26,28-crown-6 (BiPCalix[4]C6) supramolecular recognition material, BiPCalix[4]C6/XAD-7, was synthesized. It was performed by vacuum impregnation and immobilization of BiPCalix[4]C6 into the pores of the macroporous XAD-7 particles. The composition and structure were characterized using SEM, BET, TG-DSC, FT-IR, and XRD, respectively. The adsorption of some typical metals contained in highly active liquid waste (HLW) such as Ru(III), Mo(VI), K(I), Rb(I), Cs(I), Sr(II), Ba(II), La(III), and Y(III) onto the BiPCalix[4]C6/XAD-7 materials was investigated. The effects of the HNO₃ concentration and contact time on the adsorption of the tested metals were evaluated. It was found that at the optimum concentration of 4.0 M HNO₃, BiPCalix[4]C6/XAD-7 exhibited excellent adsorption ability and high selectivity for Cs(I) over all the other tested metals, which showed weak or almost no adsorption except Rb(I). It demonstrated that application of the polymer-based supramolecular recognition material, BiPCalix[4]C6/XAD-7, in partitioning of Cs(I) from HLW is promising.     

Synthesis of a macroporous silica‐based derivative of pyridine material and its application in separation of palladium

A novel macroporous silica‐based 2,6‐bis(5,6‐dibutyl‐1,2,4‐triazine‐3‐yl)pyridine (BDBTP) material, BDBTP/SiO₂‐P, was prepared through impregnation and immobilization of BDBTP and octanol into the pores of the SiO₂‐P particles. The adsorption of 10 typical fission and nonfission elements contained in highly active liquid waste (HLW) onto BDBTP/SiO₂‐P was investigated by examining the effect of contact time and the HNO₃ concentration in the range of 0.1–5.0 M. Pd(II), a weak Lewis acid and an electron‐pair acceptor, was strongly complexed with nitrogen, a weak Lewis base and an electron‐pair donor. BDBTP/SiO₂‐P showed excellent adsorption ability and high selectivity for Pd(II) over all the tested metals. The separation of Pd(II) from a simulated HLW was performed by BDBTP/SiO₂‐P packed column. Pd(II) was effectively eluted with 0.2 M thiourea and separated from the others. It demonstrated that in HNO₃, application of the macroporous silica‐based BDBTP/SiO₂‐P material in partitioning and recovery of Pd(II) from HLW is promising. © 2010 American Institute of Chemical Engineers AIChE J, 2010     

Preparation of macroporous silica-based crown ether materials for strontium separation

To develop a separation process of Sr(II), a macroporous silica-based 4,4′,(5′)-di(tert-butylcyclohexano)-18-crown-6 (DtBuCH18C6) polymeric material, (DtBuCH18C6+Oct)/SiO₂-P, was synthesized by impregnating and immobilizing DtBuCH18C6 and 1-octanol into the pores of the macroporous SiO₂-P particles support. DtBuCH18C6 was modified with 1-octanol through hydrogen bonding. The adsorption of simulant elements of some typical fission products Ru(III), Pd(II), Ba(II), Mo(VI), La(III), Y(III), Sr(II), Cs(I) and those of non-fission products Na(I) and K(I) onto (DtBuCH18C6+Oct)/SiO₂-P were studied at 298 K. The effects of the HNO₃ concentration in a range of 0.1–5.0 M and contact time on the adsorption were investigated. (DtBuCH18C6+Oct)/SiO₂-P showed excellent adsorption ability and high selectivity for Sr(II) over all of the tested metals except Ba(II). Partitioning of Sr(II) from a 2.0 M HNO₃ solution containing ~5.0 × 10^?3 M of the tested metals was conducted utilizing (DtBuCH18C6+Oct)/SiO₂-P packed column. Pd(II), Mo(VI), Y(III), La(III), Ru(III), K(I), Cs(I), and Na(I) showed no adsorption and flowed into effluent along with 2.0 M HNO₃. Sr(II) was retained on (DtBuCH18C6+Oct)/SiO₂-P and was eluted effectively by H₂O, while Ba(II) showed similar elution behavior. The bleeding of total organic carbon leaked from (DtBuCH18C6+Oct)/SiO₂-P was evaluated. It was demonstrated that the macroporous silica-based (DtBuCH18C6+Oct)/SiO₂-P materials are promising in separation of Sr(II) from high level radioactive waste.     

Adsorption Behavior of Sr(II) and some Typical Co‐existent Metals Contained in High Level Liquid Waste onto a Modified Macroporous Silica‐Based Polymeric DtBuCH18C6 Composite

To significantly reduce the bleeding of 4,4′,(5′)‐di(tert‐butylcyclohexano)‐18‐crown‐ 6 (DtBuCH18C6), an improved novel macroporous silica‐based polymeric composite (DtBuCH18C6+TBP)/SiO₂‐P was synthesized. It was performed by impregnating and immobilizing DtBuCH18C6 into the pores of the SiO₂‐P particles via the molecular modification of DtBuCH18C6 with a tri‐n‐butyl phosphate (TBP) through hydrogen bonding. The adsorption of a few typical simulated fission and non‐fission products Pd(II), La(III), Na(I), K(I), Sr(II), Ba(II), Ru(III), Cs(I), Mo(VI), and Y(III) onto (DtBuCH18C6+TBP)/SiO₂‐P was investigated at 323 K. It was done by examining the effect of contact time and the HNO₃ concentration in a range of 0.1–5.0 M. Sr(II), one of the main heat emitting nuclides, showed optimum adsorption onto (DtBuCH18C6+TBP)/SiO₂‐P in 2.0 HNO₃, while others showed very weak or almost no adsorption except a portion of Ba(II). The leaching of TBP and DtBuCH18C6 from (DtBuCH18C6+TBP)/SiO₂‐P was evaluated. The average content of DtBuCH18C6, 298.7 ppm, leached from (DtBuCH18C6+TBP)/SiO₂‐P in 2.0 M HNO₃ at 323 K was obviously lower than that of 797.3 ppm leached from DtBuCH18C6/SiO₂‐P at 298 K. The significant reduction of DtBuCH18C6 leaching from its macroporous silica‐based polymeric adsorbent was achieved. It is useful for the recycle operation of the silica‐based DtBuCH18C6 impregnated polymeric composite in chromatographic partitioning of Sr(II) from high level liquid waste (HLLW).     

Removal of cesium by countercurrent solvent extraction with a calix[4]crown derivative

A macrocyclic 1,3-di(1-dodecyloxy)-2,4-crown-6-calix[4]arene (DodCalix[4]C6) was synthesized and characterized. The extraction of Cs(I) and more than 10 typical metals with DodCalix[4]C6/octanol in HNO₃ medium was investigated. DodCalix[4]C6 exhibited strong extraction ability and high selectivity for Cs(I) over others except for Rb(I). The optimum acidity in Cs(I) extraction was 3.0 M HNO₃. The Cs(I) separation from a simulated highly active liquid waste by five-stage countercurrent extraction was performed. The extraction efficiency of Cs(I) for five-stage extraction was greater than 99%. The effective partitioning of Cs(I) by DodCalix[4]C6/octanol through multistage countercurrent extraction was achieved.     

Synthesis,extraction, and adsorption properties of calix[4]arene‐poly(ethylene‐glycol) crosslinked polymer

Novel calix[4]arene‐poly(ethylene glycol) crosslinked polymer (CCP) has been synthesized by the polycondensation reaction between a p‐tert‐butylcalix[4]arene derivative and dihydroxyl capped poly(ethylene glycol) (DHPEG, M_n = 1000) catalyzed by neodymium tosylate. The hydrogel, consisted of 66.9% water and 33.1% CCP, can selectively extract aromatic organic molecules from aqueous solution according to the diameter of the guest molecules, which infers that the diameter of the calix[4]arene cavity is about 5.4 Å and the conformation of calix[4]arene units altered from cone conformation to 1,3‐alternate conformation during the polycondensation reaction. Furthermore, CCP can also adsorb naphthalene from gas phase, showing much higher capacity than active carbon does, which may have some potential applications in the field of separation and environment protection. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of water‐insoluble functional copolymers containing amide,amine, and carboxylic acid groups and their metal‐ion‐uptake properties

The crosslinked poly[N‐(3‐dimethylamino)propylmethacrylamide] [P(NDAPA)] and poly[N‐(3‐dimethylamino)propylmethacrylamide‐co‐acrylic acid] [P(NDAPA‐co‐AA)] were synthesized by radical polymerization. The resins were completely insoluble in water. The metal‐ion‐uptake properties were studied by a batch equilibrium procedure for the following metal ions: silver(I), copper(II), cadmium(II), zinc(II), lead(II), mercury(II), chromium(III), and aluminum(III). The P(NDAPA‐co‐AA) resin showed a lower metal‐ion affinity than P(NDAPA), except for Hg(II), which was retained at 71% at pH 2. At pH 5, the resin showed a higher affinity for Pb(II) (80%) and Cu(II) (60%), but its affinity was very low for Zn(II) and Cr(III). The polymer ligand–metal‐ion equilibrium was achieved during the first 20 min. By changing the pH, we found it possible to remove between 60 and 70% of Cd(II) and Zn(II) ions with (1M, 4M) HClO₄ and (1M, 4M) HNO₃. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:5232–5239, 2006     

Adsorption of Some Typical Fission Products onto a Novel Macroporous Silica-based Dialkyl Derivative of Pyridine Impregnated Material

A macroporous silica-based multidentate soft-ligand 2,6-bis(5,6-di(iso-hexyl)-1,2,4-triazine-3-yl)pyridine (BDIHTP) material, BDIHTP/SiO₂-P, was synthesized by impregnating and immobilizating BDIHTP into the pores of the SiO₂-P particles. The adsorption behavior of some typical fission products Mo(VI), Zr(IV), Ru(III), Pd(II), Rh(III), and a part of rare earths La(III), Ce(III), Nd(III), Eu(III), Gd(III), Dy(III), Er(III), Yb(III), and Y(III) contained in highly active liquid waste (HLW) onto BDIHTP/SiO₂-P was investigated. The effects of contact time and the concentration of HNO₃ in the range of 0.3 M to 5.0 M were examined. The BDIHTP/SiO₂-P materials showed excellent adsorption ability and high selectivity for Pd(II) greater than all of the tested metals. It was contributed to the effective complexation of Pd(II), a soft-Lewis acid and an electron-pair acceptor, with BDIHTP, a soft-Lewis base and an electron-pair donor. The chromatographic partitioning of the tested metals from 1.0 M HNO₃ by BDIHTP/SiO₂-P packed column was performed. Pd(II) was effectively eluted with 0.2 M thiourea-0.1 M HNO₃ and then separated from the others. The results are beneficial to partitioning of the long-lived minor actinides and Pd(II) together from HLW by the BDIHTP/SiO₂-P materials.     

Calix[4]arene‐tetranitrone as crosslinker in dental composite materials

The synthesis of a functionalized calix[4]arene bearing 1,3‐dipolaric nitrone groups ( 5 ) has been carried out. The reaction of N‐methylhydroxylamine or N‐propylhydroxylamine with the carbonyl group of 5,11,7,23‐tetraformyl‐25,26,27,28‐tetraalkoxycalix[4]arene leads to calix[4]arenes bearing a nitrone function at each of the four para‐positions. Via 1,3‐dipolar cyclo‐addition of acrylic acid methyl ester with the nitrone functions of 5 , subsequently an upper rim‐substituted tetraisoxalidinecalix[4]arene is quantitatively synthesized. Further, the minimization of shrinkage of a dental filling depending on the amount of calix[4]arene‐tetranitrone is discussed. Copyright © 2011 Society of Chemical Industry     

Controlled Reversible Anchoring of η6‐Arene/TsDPEN‐ Ruthenium(II) Complex onto Magnetic Nanoparticles: A New Strategy for Catalyst Separation and Recycling

A new catalyst separation and recycling protocol combining magnetic nanoparticles and host‐guest assembly was developed. The catalyst, (η⁶‐arene)[N‐(para‐toluenesulfonyl)‐1,2‐diphenylethylenediamine]ruthenium trifluoromethanesulfonate [Ru(OTf)(TsDPEN)(η⁶‐arene)] bearing a dialkylammonium salt tag, was easily separated from the reaction mixtures by magnet‐assisted decantation, on basis of the formation of a pseudorotaxane complex by using dibenzo[24]crown‐8‐modified Fe₃O₄ nanoparticles. The ruthenium catalyst has been successfully reused at least 5 times with the retention of enantioselectivity but at the expense of relatively low catalytic activities in the asymmetric hydrogenation of 2‐methylquinoline.     

Synthesis and characterization of tetrakis‐ derivatives of bisphenol‐A with 4‐phenylazoaniline and 5‐(4‐aminophenylazo)‐25,26,27‐tribenzoyloxy‐ 28‐hydroxycalix[4]arene

The synthesis of tetrakis‐ derivatives of bisphenol‐A containing azo groups at their 2,2′,6,6′‐positions is reported. Novel examples of bisphenol‐A, coupled with diazonium salts and derived from 4‐phenylazoaniline and 5‐(4‐aminophenylazo)‐25,26,27‐tribenzoyloxy‐28‐hydroxycalix [4]arene, have been synthesized. It has been observed that the coupling reaction of diazonium salt obtained from 4‐phenylazoaniline with bisphenol‐A gives tetrakis‐ while those derived from 5‐(4‐aminophenylazo)‐25,26,27‐tribenzoyloxy‐28‐hydroxycalix [4]arene give partially substituted bisphenol‐A analogues. The newly prepared tetrakis‐azo substituted bisphenol‐A compounds ( 1 and 2 ) are characterized by using UV‐vis, FT‐IR, ¹H‐NMR spectroscopic methods as well as elemental analysis techniques. These azo compounds give rise to bathochromic shifts in the absorption spectra, which can even be detected by “naked eye.” © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Impregnation synthesis of a novel macroporous silica-based crown ether polymeric material modified by 1-dodecanol and its adsorption for strontium and some coexistent metals

4,4′,(5′)-Di-(tert-butylcyclohexano)-18-crown-6(DtBuCH18C6) is a chelating agent having high selectivity mostly for Sr(II). To significantly reduce its leakage by molecular modification, a macroporous silica-based DtBuCH18C6 polymeric composite (DtDo/SiO₂–P) was synthesized. It was performed by impregnating and immobilizing DtBuCH18C6 and 1-dodecanol molecules into the pores of the SiO₂–P particles utilizing an advanced vacuum sucking technique. The adsorption of a few fission and non-fission products Sr(II), Ba(II), Cs(I), Ru(III), Mo(VI), Na(I), K(I), Pd(II), La(III), and Y(III) onto DtDo/SiO₂–P was investigated. It was done by examining the effects of contact time and the HNO₃ concentration in a range of 0.1–5.0 M at 298 K. At the optimum concentration of 2.0 M HNO₃, DtDo/SiO₂–P exhibited strong adsorption ability and high selectivity for Sr(II) great over all of the tested elements, which showed very weak or almost no adsorption except Ba(II). Meanwhile, It was found that the quantity of total organic carbon (TOC) leaked from DtDo/SiO₂–P in 2.0 M HNO₃, 187.5 ppm, was lower than 658.4 ppm that leaked from DtBuCH18C6/SiO₂–P, which was not modified. This was ascribed to the effective association of DtBuCH18C6 and 1-dodecanol through intermolecular interaction. The reduction of DtBuCH18C6 leakage by molecular modification with 1-dodecanol was achieved. It was of great benefit to application of DtDo/SiO₂–P in chromatographic partitioning of Sr(II), one of the main heat generators, from high level liquid waste (HLLW) in reprocessing of nuclear spent fuel in the MAREC (Minor Actinides Recovery from HLLW by Extraction Chromatography) process developed recently.     

Blending ultrahigh‐molecular‐weight polyethylene and poly(ethylene/10‐undecen‐1‐ol) in one nascent particle

Ultrahigh‐molecular‐weight polyethylene (UHMWPE)/polar polyethylene (PE) composites were blended in one nascent particle by in situ polymerization with a hybrid catalyst. Polystyrene‐coated SiO₂ particles were used to support the hybrid catalyst. Fe(acac)₃/2,6‐bis[1‐(2‐isopropylanilinoethyl)] was supported on SiO₂ for the synthesis of UHMWPE, whereas [PhN?C(CH₃)CH?C(Ph)O]VCl₂ was immobilized on a polystyrene layer to prepare a copolymer of ethylene and 10‐undecen‐1‐ol (polar PE). Importantly, the core part of the supports (the polystyrene layer) exhibited pronounced transfer resistance to 10‐undecen‐1‐ol; this provided an opportunity to keep the inside iron active sites away from the poisoning of 10‐undecen‐1‐ol. Therefore, UHMWPE was simultaneously synthesized with polar PE by in situ polymerization. Interestingly, the morphological results show that UHMWPE and the polar PE were successfully blended in one nascent polymer. This improved the miscibility of the composites, where most of the chains were difficult to crystallize because of the strong interactions between the PE chains and polar chains. The blends showed an extremely low crystallinity, that is, 9.9%. Finally, the hydrophilic properties of the polymer composites were examined. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46652.     

Calixarene‐Derived Mono‐Iminophosphoranes: Highly Efficient Ligands for Palladium‐ and Nickel‐Catalysed Cross‐Coupling

The first mono‐iminophosphoranes based on a calix[4]arene skeleton have been synthesised and tested in the arylation of aryl bromides and aryl chlorides. Combining these ligands with [Pd(OAc)₂] or [Ni(cod)₂] resulted in highly active Suzuki–Miyaura and Kumada–Tamao–Corriu cross‐coupling catalysts, respectively. TOFs up to ca. 4×10⁵ mol(ArBr)⋅mol(M)⁻¹⋅h⁻¹ were obtained in each case. The remarkable activities observed probably arise from the ligands’ ability to form complexes with cavity‐entrapped “MArX” moieties (endo‐complexes), their highly crowded metal environment favouring formation of mono‐ligated intermediates over that of less reactive bis‐ligated ones. Possible supramolecular interactions within the cavity involving the receptor wall and the aromatic substrate may also significantly influence the reaction rates, notably by increasing the proportion of endo‐complexes.     

Synthesis of 9‐(4‐nitrophenylsulfonyl)‐9H‐carbazole: Comparison of an impedance study of poly[9‐(4‐nitrophenylsulfonyl)‐9H‐carbazole] on gold and carbon fiber microelectrodes

In this study, 9‐(4‐nitrophenylsulfonyl)‐9H‐carbazole (NPhSCz) monomer was chemically synthesized. The monomer characterization was performed by Fourier transform infrared spectroscopy, ¹H‐NMR, and melting point analysis. Two different electropolymerizations of NPhSCz were studied on a gold microelectrode (Au electrode) and carbon fiber microelectrodes (CFMEs) in a 0.1M sodium perchlorate (NaClO₄)/acetonitrile solution. The electropolymerization experiments were done from 1 to 4 mM. The characterizations of two different modified electrodes of poly[9‐(4‐nitrophenylsulfonyl)‐9H‐carbazole] [poly(NPhSCz)] were performed by various techniques, including cyclic voltammetry, scanning electron microscopy–energy‐dispersive X‐ray analysis, and electrochemical impedance spectroscopy (EIS). The effects of the initial monomer concentrations (1, 2, 3, and 4 mM) were examined by EIS. The capacitive behaviors of the modified electrodes were defined via Nyquist, Bode magnitude, Bode phase, and admittance plots. The variation of the low‐frequency capacitance (C_LF) and double‐layer capacitance (C_dl) values are presented at different initial monomer concentrations. Poly(NPhSCz)/CFME was more capacitive (C_LF = 6.66 F/cm² and C_dl ≈ 28 mF) than the Au electrode (C_LF = 6.53 F/cm² and C_dl ≈ 20 mF). An equivalent circuit model of R[QR(CR)(RW)](CR), (R: Current, Q: Constant phase element, C: Double layer capacitance, W: Warburg impedance), was used to fit the theoretical and experimental data. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and in vivo Evaluation of Fluorine‐18 and Iodine‐123 Pyrazolo[4,3‐e]‐1,2,4‐triazolo[1,5‐c]pyrimidine Derivatives as PET and SPECT Radiotracers for Mapping A2A Receptors

Imaging agents that target adenosine type 2A (A_2A) receptors play an important role in evaluating new pharmaceuticals targeting these receptors, such as those currently being developed for the treatment of movement disorders like Parkinson′s disease. They are also useful for monitoring progression and treatment efficacy by providing a noninvasive tool to map changes in A_2A receptor density and function in neurodegenerative diseases. We previously described the successful evaluation of two A_2A‐specific radiotracers in both nonhuman primates and in subsequent human clinical trials: [¹²³I]MNI‐420 and [¹⁸F]MNI‐444. Herein we describe the development of both of these radiotracers by selection from a series of A_2A ligands, based on the pyrazolo[4,3‐e]‐1,2,4‐triazolo[1,5‐c]pyrimidine core of preladenant. Each of this series of 16 ligands was found to bind to recombinant human A_2A receptor in the low nanomolar range, and of these 16, six were radiolabeled with either fluorine‐18 or iodine‐123 and evaluated in nonhuman primates. These initial in vivo results resulted in the identification of 7‐(2‐(4‐(4‐(2‐[¹⁸F]fluoroethoxy)phenyl)piperazin‐1‐yl)ethyl)‐2‐(furan‐2‐yl)‐7H‐pyrazolo[4,3‐e][1,2,4]triazolo[1,5‐c]pyrimidin‐5‐amine ([¹⁸F]MNI‐444) and 7‐(2‐(4‐(2‐fluoro‐4‐[¹²³I]iodophenyl)piperazin‐1‐yl)ethyl)‐2‐(furan‐2‐yl)‐7H‐imidazo[1,2‐c]pyrazolo[4,3‐e]pyrimidin‐5‐amine ([¹²³I]MNI‐420) as PET and SPECT radiopharmaceuticals for mapping A_2A receptors in brain.