One‐step synthesis of bis‐macromonomers of poly(1,3‐dioxolane) catalyzed by Maghnite‐H+

Telechelic poly(1,3‐dioxolane) (PDXL) bis‐macromonomers bearing methyl methacrylate end groups were prepared by cationic ring‐opening polymerization of 1,3‐dioxolane (DXL), in the presence of methacrylic anhydride, catalyzed by Maghnite‐H⁺ (Mag‐H⁺), in bulk and in solution. Maghnite is a montmorillonite sheet silicate clay, which exchanged with protons to produce Mag‐H⁺. The influence of the amount of Mag‐H⁺, monomer (DXL), and methacrylic anhydride on monomer conversion was studied. The polymerization yield and the molecular weight of α,ω‐bis‐unsaturated PDXLs prepared depend on the amount of Mag‐H⁺ used and the reaction time. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Maghnite‐H+ as a cationic catalyst in the synthesis of poly(1,3‐dioxolane) and α,ω‐methacryloyloxy‐poly(1,3‐dioxolane)

The polymerization of 1,3‐dioxolane catalyzed by Maghnite‐H^+; (Mag‐H⁺), a montmorillonite sheet silicate clay exchanged with protons, was investigated. The cationic ring‐opening polymerization of 1,3‐dioxolane was initiated by Mag‐H⁺ at different temperatures (20, 30, 50, and 70°C) in bulk and in a solvent (dichloromethane). The effects of the amount of Mag‐H⁺ and the temperature were studied. The polymerization rate and the average molecular weights increased with an increase in the temperature and the proportion of the catalyst. These results indicated the cationic nature of the polymerization and suggested that the polymerization was initiated by proton addition to the monomer from Mag‐H⁺. Moreover, we used a simple method, in one step in bulk and in solution at room temperature (20°C), to prepare a telechelic bismacromonomer: α,ω‐bisunsaturated poly(1,3‐dioxolane). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 78–82, 2006     

Synthesis of perfluorohexyl‐terminated poly(ethylene oxide) using maghnite‐h as clay catalyst

Activated monomer cationic ring‐opening polymerization of ethylene oxide initiated with 1H,1H,2H, 2H‐perfluorooctan‐1‐ol, using acid exchanged montmorillonite clay called Maghnite‐H⁺ (Mag‐H⁺) as an effective catalyst, was carried out to obtain the corresponding homopolymers with narrow polydispersity ratios. The molecular weights of the obtained polymers could be controlled with the feed ratio of the monomer and initiator. The effect of amount of catalyst and time on the polymerization yield and viscosity of the polymers were studied. The structure was confirmed by ¹H‐NMR and MALDI‐TOF‐MS. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Maghnite‐H+, a solid catalyst for the cationic polymerization of α‐methylstyrene

The polymerization of α‐methylstyrene (AMS) catalyzed by Maghnite‐H⁺ (Mag‐H) was investigated. Mag‐H is a montmorillonite sheet silicate clay, exchanged with protons. It was found that the cationic polymerization of AMS is initiated by Mag‐H at ambient temperature in bulk and in solution. The effect of the amount of Mag‐H, the temperature, and the solvent was studied. The polymerization rate increased with increase in the temperature and the proportion of catalyst, and it was larger in nonpolar solvents. These results indicated the cationic nature of the polymerization. It may be suggested that the polymerization is initiated by proton addition to monomer from Mag‐H. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Preparation and characterization of cyclic polyesters from ring‐chain reactions of poly(oxyepichlorhydrin oxymaloyl)

In this article, the synthesis and characterization of cyclic polyesters of poly(oxyepichlorhydrin oxymaloyl) from a ring‐chain reaction induced by “Maghnite,” an acid‐exchanged montmorillonite as acid solid ecocatalyst (Mag‐H⁺), is described. Maghnite is already used as catalyst for polymerization of many vinylic and heterocyclic monomers [Belbachir, U.S. Pat. 066969.0101 (2001)]. The reactions were monitored by gel permeation chromatography and ¹H‐NMR spectroscopy and the existence of cyclic species was proven. The effect of the amount of catalyst on yield and molecular weight of polymer was studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 1240–1243, 2006     

Ring‐opening bulk polymerization of five‐ and six‐membered cyclic phosphonates using maghnite,a nontoxic proton exchanged montmorillonite clay

A new method of preparation of poly(alkylene H‐phosphonate)s by ring‐opening bulk polymerization of the five‐ and six‐membered cyclic phosphonates monomers using the nontoxic Maghnite‐H⁺ as the initiator is described. Cyclic phosphonate monomers have been first synthesized. In particular, a new one‐step synthesis of 2‐hydro‐2‐oxo‐1,3,2‐dioxaphospholane is reported with a yield of 70%. The efficiency of the montmorillonite sheet silicate clay which exchanged with protons, called Maghnite‐H⁺, as cationic initiator has been proved and the resulting biomimetic poly(alkylene H‐phosphonate)s have been characterized. The Maghnite‐H⁺ regenerated after one turn‐over has showed to be still efficient as initiator for the ring‐opening polymerization. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Binary copolymerization of 4‐methyl‐1,3‐pentadiene with styrene,butadiene and isoprene catalysed by a titanium [OSSO]‐type catalyst

Binary copolymerization of 4‐methyl‐1,3‐pentadiene (4MPD) with styrene, butadiene and isoprene promoted by the titanium complex dichloro{1,4‐dithiabutanediyl‐2,2′‐bis[4,6‐bis(2‐phenyl‐2‐propyl)phenoxy]}titanium activated by methylaluminoxane is reported. All the copolymers are obtained in a wide range of composition and the molecular weight distributions obtained from gel permeation chromatographic analysis of the copolymers are coherent with the materials being copolymeric in nature. The copolymer microstructure was fully elucidated by means of ¹H NMR and ¹³C NMR spectroscopy. Differential scanning calorimetry shows an increase of glass transition temperature (T_g) with the amount of 4MPD in the copolymers with butadiene and isoprene, while in the copolymers with styrene T_g is increased on increasing the amount of styrene. © 2016 Society of Chemical Industry     

Non‐catalyst synthesis and in vitro drug release property of poly(5,5‐dimethyl‐1,3‐dioxan‐2‐one)‐block‐methoxy poly(ethylene glycol) copolymers

A series of poly(5,5‐dimethyl‐1,3‐dioxan‐2‐one)‐block‐methoxy poly(ethylene glycol) (PDTC‐b‐mPEG) copolymers were synthesized by the ring‐opening polymerization of 5,5‐dimethyl‐1,3‐dioxan‐2‐one (DTC) in bulk, using methoxy poly(ethylene glycol) (mPEG) as initiator without adding any catalysts. The resulting copolymers were characterized by Fourier transform infrared spectra, ¹H NMR and gel permeation chromatography. The influences of some factors such as the DTC/mPEG molar feed ratio, reaction time and reaction temperature on the copolymerization were investigated. The experimental results showed that mPEG could effectively initiate the ring‐opening polymerization of DTC in the absence of catalyst, and that the copolymerization conditions had a significant effect on the molecular weight of PDTC‐b‐mPEG copolymer. In vitro drug release study demonstrated that the amount of indomethacin released from PDTC‐b‐mPEG copolymer decreased with increase in the DTC content in the copolymer. © 2013 Society of Chemical Industry     

Random copolymerization of 2,2‐dimethyltri methylene carbonate and ε‐caprolactone using a rare‐earth tris(4‐tert‐butylphenolate)s as a single‐component initiator

Highly random copolymers of 2,2‐dimethyltrimethylene carbonate (DTC) and ε‐caprolactone (CL) were synthesized by single component rare‐earth tris(4‐tert‐butylphenolate)s [Ln(OTBP)₃] for the first time. The influences of reaction conditions on the copolymerization initiated by La(OTBP)₃ have been examined in detail. The monomer reactivity ratios of DTC and CL determined by the Fineman–Ross method are 4.0 for r_DTC and 0.27 for r_CL. The microstructure of the copolymer was determined by the analyses of the diads DTC–DTC, DTC–CL, CL–DTC and CL–CL of the ¹H NMR spectra. The high degree of randomness of the chain structure was further confirmed by the ¹³C NMR spectra and differential scanning calorimetry. The thermal properties of the copolymers as a function of composition are reported. The mechanism investigated by ¹H NMR data indicates that the rare‐earth tris(4‐tert‐butylphenolate)s initiate the ring‐opening copolymerization of DTC and CL with acyl‐oxygen bond cleavages of the monomers. Copyright © 2004 Society of Chemical Industry     

Structural and photooxidation studies of poly(styrene oxide) prepared with Maghnite‐H+ as cationic catalyst

The nature of irregularities and end‐groups in poly(styrene oxide) samples prepared using Maghnite‐H⁺ as a cationic catalyst were studied by ¹H‐ and ¹³C‐NMR at 200 MHz. Head‐to‐head (H‐H) and tail‐to‐tail (T‐T) irregularities are detected in all the samples studied. Secondary hydroxyl terminal groups are identified in polymers prepared with Maghnite‐H⁺. Poly(styrene oxide) was found to undergo chain scission by aging at 25°C. It was confirmed that oxidation of this type of polymers results from the important sensitivity of the polyether soft segment to oxidative degradation. For this reason, the scissions due to the oxidation of the material lead to notable quantities of low molecular weight photoproducts. Among the various structures produced by the oxidative degradation process, benzoate and secondary hydroxyl groups are identified by MALDI‐TOF‐MS. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of water soluble poly(N‐acetyl)iminoethylene and poly(ethyleneimine) by ion‐exchanged clay montmorillonite

The cationic polymerization of 2‐méthyl‐2‐oxazoline was carried out at 0°C in acetonitrile using an acid‐exchanged montmorillonite as acid solid ecocatalyst (Maghnite‐H⁺). The effect of the amount of catalyst, solvent, and times of polymerization on yield and viscosity of polymer was studied. A typical reaction product (PMOX) was analyzed by infrared and nuclear magnetic resonance spectroscopy as well as by gel‐permeation chromatography and MALDI‐TOF MS. The polymers presented similar spectrometric results and narrow molecular weight distribution. The poly(N‐acetyl)iminoethylene was hydrolyzed in acid medium obtaining a linear poly(ethyleneimine). © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:3741–3750, 2006     

Synthesis and biodegradability evaluation of 2‐methylene‐1,3‐dioxepane and styrene copolymers

Biodegradable copolymers of 2‐methylene‐1,3‐dioxepane (MDO) and styrene (ST) were synthesized by free‐radical copolymerization using di‐t‐butyl peroxide (DTBP) as the initiator. The copolymers containing ester units were characterized by Fourier transform infrared (FTIR), ¹H‐NMR, and ¹³C‐NMR spectroscopy. Their molecular weight and polydispersity index were determined by gel permeation chromatography (GPC). In vitro enzymatic degradation of poly(MDO‐co‐ST) was performed at 37°C in phosphate buffer solution (PBS, pH = 7.4) in the presence of Pseudomonas lipase or crude enzyme extracted from earthworm. The experiment showed that incorporating ester units into C? C backbone chain of polystyrene would result in a biodegradable copolymer. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 1146–1151, 2007     

Synthesis and properties of polycarbonate copolymers of trimethylene carbonate and 2‐phenyl‐5,5‐bis(hydroxymethyl) trimethylene carbonate

The polycarbonate copolymers poly[trimethylene carbonate‐co‐2‐phenyl‐5,5‐bis(hydroxymethyl) trimethylene carbonate] [P(TMC‐co‐PTC)] were synthesized by the ring‐opening polymerization of trimethylene carbonate (TMC) and 2‐phenyl‐5,5‐bis(hydroxymethyl) trimethylene carbonate (PTC) with tin(II) 2‐ethylhexanoate and aluminum isopropoxide as the catalysts. These copolymers were further reduced by a palladium/carbonate (Pd/C; 10%) catalyst to produce partly deprotected copolymers. These two types of copolymers were characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, UV spectroscopy, gel permeation chromatography, differential scanning calorimetry, and an automatic contact angle meter. The influences of the feed molar ratio of the monomers, the catalyst concentration, the reaction time, and the reaction temperature on the copolymerization process were also studied. The copolymerization of the TMC and PTC monomers was a nonideal copolymerization, and the copolymerization reactivity ratio of TMC was higher than that of PTC. In vitro degradation tests indicated that the partly deprotected copolymers possessed faster degradation rates and more hydrophilicity than the corresponding unreduced copolymers. Moreover, the degradation of these two type copolymers increased when the pH value of the buffer solutions decreased. In vitro drug‐release experiments showed that these two types of copolymers had steady drug‐release rates and good controlled release properties. Moreover, the partly deprotected copolymers had faster drug‐release rates than the corresponding unreduced copolymers. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Ultrafiltration of metal ions by water‐soluble chelating poly(N‐acryloyl‐N‐methylpiperazine‐co‐N‐acetyl‐α‐aminoacrylic acid)

Water‐soluble copolymers of N‐acryloyl‐N‐methylpiperazine and N‐acetyl‐α‐aminoacrylic acid were synthesized by radical polymerization. The copolymerization yield ranged between 60 and 97%. The FTIR and NMR spectra demonstrated that the copolymerization occurred. The copolymer composition was determined from ¹H‐NMR spectra by comparison of methyl groups from both moieties. The copolymers were richest in AAA units. The metal ion retention properties were investigated by the liquid‐phase polymer‐based retention (LPR) technique at different pH and filtration factors. The affinity for the metal ions depended on the copolymer composition, pH, and filtration factor. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2556–2561, 2002     

Homogeneous graft copolymerization of chitosan with butyl acrylate by γ‐irradiation via a 6‐O‐maleoyl‐N‐phthaloyl‐chitosan intermediate

The graft copolymerization of butyl acrylate (BA) onto chitosan was tried via a new protection‐graft‐deprotection procedure. About 6‐O‐maleoyl‐N‐phthaloyl‐chitosan was synthesized and characterized by Fourier transform infrared spectra analysis (FT‐IR) and ¹H‐NMR. Because the intermediate 6‐O‐maleoyl‐N‐phthaloyl‐chitosan was soluble in organic solvents, the graft copolymerization was carried out in a homogeneous system. Grafting was initiated by γ‐irradiation. The graft extent was dependent on the irradiation dose and the concentration of BA monomer, and copolymers with grafting above 100% were readily prepared. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 489–493, 2006     

An in vitro focus on doxorubicin hydrochloride delivery of novel pH‐responsive poly(2‐succinyloxyethylmethacrylate) and poly[(N‐4‐vinylbenzyl),N,N‐diethylamine] diblock copolymers

Novel pH‐responsive poly(2‐succinyloxyethylmethacrylate)‐b‐poly[(N‐4‐vinylbenzyl),N,N‐diethylamine] [poly(SEMA‐b‐VEA)] diblock copolymers were synthesized via reversible addition fragmentation transfer (RAFT) polymerization to investigate their self‐assembly micellar behavior. The self‐assembly behaviors of synthesized diblock copolymers with distinct molecular weights (labeled (1) to) were confirmed by ¹H NMR spectroscopy, TEM and dynamic light scattering measurements. Doxorubicin hydrochloride (DOX) loading capacity was evaluated, and the in vitro cytotoxicity effect of DOX‐loaded diblock copolymer was also studied by assessing the survival rate of the breast cancer cell line MCF‐7 with 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) assay. The results exhibited remarkable controlled release in the MTT assay. The DOX encapsulation efficiency was calculated to be 96.4%. The size and zeta potential of DOX‐loaded poly(SEMA‐b‐VEA) diblock copolymers were 204 nm and +5.7 mV at a pH of 7.4. DOX release values after 440 h at pH 7.4, 5.4 and 4 were 22.15%, 31.43% and 47.06%, respectively. The released values of DOX‐loaded poly(SEMA‐b‐VEA) and at pH 7.4 were 22.15%, 20.5% and 17.5%, respectively. Cell survival ratios were 18.9%, 23.16% and 16.92% after 72 h. Poly(SEMA‐b‐VEA) copolymers can be considered in nanomedicine applications due to their excellent pH‐responsive micellar behavior. © 2017 Society of Chemical Industry     

Graft copolymerization of methyl methacrylate with an N‐substituted maleimide–liquid‐crystalline copolymer by atom transfer radical polymerization

The synthesis of novel copolymers consisting of a side‐group liquid‐crystalline backbone and poly (methyl methacrylate) grafts were realized by the use of atom transfer radical polymerization (ATRP). In the first stage, the bromine‐functional copolymers 6‐(4‐cyanobiphenyl‐4′‐oxy)hexyl acrylate and (2,5‐dioxo‐2,5‐dihydro‐1H‐pyrrole‐1‐yl)methyl 2‐bromopropanoate were synthesized by free‐radical polymerization. These copolymers were used as initiators in the ATRP of methyl methacrylate to yield graft copolymers. Both the macroinitiator and graft copolymers were characterized by ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis. The ATRP graft copolymerization was supported by an increase in the molecular weight of the graft copolymers compared to that of the macroinitiator and also by their monomodal molecular weight distribution. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Ring‐opening polymerization of styrene oxide with Maghnite‐H+ as ecocatalyst

The polymerization of styrene oxide was carried out at 20°C in chloroform with an acid‐exchanged montmorillonite as acid solid ecocatalyst (Mag‐H⁺). The effect of the amount of catalyst, solvent, and concentration of monomer on yield and molecular weight of polymer was studied. A typical reaction product (PSTO) was analyzed by infrared and nuclear magnetic resonance spectroscopy, as well as by gel‐permeation chromatography and MALDI‐TOFMS. The mechanism of the polymerization appears to be cationic. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1681–1687, 2006     

Cationic polymerization of ethylene oxide with Maghnite‐H as a clay catalyst in the presence of ethylene glycol

The activated‐monomer cationic ring‐opening polymerization of ethylene oxide, initiated with ethylene glycol and using an acid‐exchanged montmorillonite clay called Maghnite‐H⁺ as an effective catalyst, was carried out to obtain the corresponding homopolymers with narrow polydispersity ratios. The molecular weights of the obtained polymers were controlled with the feed ratio of the monomer to the initiator. The effects of the amount of the catalyst and time on the polymerization yield and viscosity of the polymers were studied. The structure was confirmed with proton nuclear magnetic resonance and matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of well‐defined comb‐like amphiphilic copolymers with protonizable units in the pendent chains: 1. Preparation of narrow polydispersity copolymers of methyl methacrylate and 2‐hydroxyethyl methacrylate by atom‐transfer radical polymerization

Well‐defined methyl methacrylate (MMA) and 2‐(trimethylsiloxy)ethyl methacrylate (Pro‐HEMA) copolymers were prepared by atom‐transfer radical polymerization(ATRP), using CuCl/2,2′‐bipyridine as catalytic system and p‐toluenesulfonyl chloride as initiator. ATRP process of MMA and Pro‐HEMA was monitored by ¹H NMR, and the kinetic curves of the MMA/Pro‐HEMA copolymerization were plotted in terms of the ¹H NMR data. At low content of Pro‐HEMA in the feed composition, the copolymerization can be well controlled with the molecular weight, polydispersity and the monomer distribution in the copolymer chain. With the increase of Pro‐HEMA content in the feed mixture, the composition of the final copolymer deviates from the composition of the feed mixture gradually, and gradient copolymers of MMA/Pro‐HEMA can be obtained. Through the hydrolysis process, well‐defined copolymers of MMA/HEMA were obtained from poly(MMA/Pro‐HEMA). Copyright © 2003 Society of Chemical Industry