CO2 Capture by As‐Prepared SBA‐15 with an Occluded Organic Template

A novel CO₂ capture phenomenon is observed by modifying as‐prepared mesoporous silica SBA‐15 (SBA(P)) with tetraethylenepentamine (TEPA), not only conserving the energy and time required for removing the template, but also opening the way to utilizing the micelle for dispersing guest species. The TEPA species dispersed within the channels of SBA(P) are highly accessible to CO₂ molecules; moreover, the hydroxyl group of the poly(ethylene oxide)–poly(propylene oxide)–poly(ethylene oxide) (Pluronic P123) template is able to modify the interactions between CO₂ and the amine to enhance the adsorptive capacity of this system. The remarkably high adsorption capacity (173 mg g^–1) of this mesoporous silica–amine composite suggests potential CO₂ trapping applications, especially at low CO₂ concentrations during prolonged cyclic operations.     

Antibody‐Functionalized Hybrid Superparamagnetic Nanoparticles

Superparamagnetic hybrid nanoparticles (ca. 80 nm) are obtained. They consist of an inner iron oxide core coated by a silica shell, which is in turn functionalized with amine or carboxyl groups and covalently coupled to a monoclonal antibody (anti‐hCG; hCG = human chorionic gonadotropin). The prepared nanoparticles show a specific magnetic moment (per gram of iron) that is comparable to that measured for commercial superparamagnetic iron oxide preparations. The bioactivity of the antibody‐conjugated magnetic nanoparticles is verified by a standard bioassay. These results indicate the potential of the hybrid nanoparticles prepared for use as enhanced contrast agents in magnetic resonance imaging applications.     

Noncovalent Polymer‐Gatekeeper in Mesoporous Silica Nanoparticles as a Targeted Drug Delivery Platform

Selective targeting of tumor cells and release of drug molecules inside the tumor microenvironment can reduce the adverse side effects of traditional chemotherapeutics because of the lower dosages required. This can be achieved by using stimuli‐responsive targeted drug delivery systems. In the present work, a robust and simple one‐pot route is developed to synthesize polymer‐gatekeeper mesoporous silica nanoparticles by noncovalent capping of the pores of drug‐loaded nanocontainers with disulfide cross‐linkable polymers. The method offers very high loading efficiency because chemical modification of the mesoporous nanoparticles is not required; thus, the large empty pore volume of pristine mesoporous silica nanoparticles is entirely available to encapsulate drug molecules. Furthermore, the polymer shell can be easily decorated with a targeting ligand for selective delivery to specific cancer cells by subsequent addition of the thiol‐containing ligand molecule. The drug molecules loaded in the nanocontainers can be released by the degradation of the polymer shell in the intracellular reducing microenvironment, which consequentially induces cell death.     

Templated Synthesis of Mesoporous Superparamagnetic Polymers

We present a novel synthetic strategy for fabricating superparamagnetic nanoparticles randomly dispersed in a mesoporous polymeric matrix. This method is based on the use of mesoporous silica materials as templates. The procedure used to obtain these mesoporous magnetic polymers consisted in: a) generating iron oxide ferrite magnetic nanoparticles (FMNP) of size ～ 7–8 nm within the pores of the silica, b) loading the porosity of the silica/FMNP composite with a polymer (Polydivinylbenzene), c) selectively removing the silica framework from the resulting silica/FMNP/polymer composite. Such magnetic porous polymeric materials exhibit large surface areas (up to 630 m² g^–1), high pore volumes (up to 0.73 cm³ g^–1) and a porosity made up of mesopores. In this way, it is possible to obtain superparamagnetic mesoporous hybrid nanocomposites that are easily manipulated by an external magnetic field and display different magnetic behaviours depending on the textural properties of the template employed.     

High‐Content,Well‐Dispersed γ‐Fe2O3 Nanoparticles Encapsulated in Macroporous Silica with Superior Arsenic Removal Performance

Novel composites of iron oxide encapsulated in macroporous silica with excellent arsenic adsorption performance have been successfully developed. Macroporous silica foams with large pore sizes of ≈100 nm and a high pore volume of 1.6 cm³ g^?1 are chosen as the porous matrix. Electron tomography technique confirms that γ‐Fe₂O₃ nanoparticles with an average particle size of ≈6 nm are spatially well‐dispersed and anchored on the pore walls at even a high γ‐Fe₂O₃ content of 34.8 wt%, rather than forming aggregates inside the pores or on the external surface. The open large‐pore structure, high loading amount, and the non‐aggregated nature of γ‐Fe₂O₃ nanoparticles lead to increased adsorption sites and thus high adsorption capacities of both As (V) and As (III) without pre‐treatment (248 and 320 mg g^?1, respectively). Moreover, the composites can reduce the concentration of both As (V) and As (III) from 100 to 2 μg L^?1. It is also demonstrated that the composites can be applied in a household drinking water treatment device, which can continuously treat 20 L of wastewater containing As (V) with the effluent concentration lower than the World Health Organization standard.     

Synthesis of Self‐Supported Ordered Mesoporous Cobalt and Chromium Nitrides

Herein, we demonstrate an ammonia nitridation approach to synthesize self‐supported ordered mesoporous metal nitrides (CoN and CrN) from mesostructured metal oxide replicas (Co₃O₄ and Cr₂O₃), which were nanocastly prepared by using mesoporous silica SBA‐15 as a hard template. Two synthetic routes are adopted. One route is the direct nitridation of mesoporous metal oxide nanowire replicas templated from SBA‐15 to metal nitrides. By this method, highly ordered mesoporous cobalt nitrides (CoN) can be obtained by the transformation of Co₃O₄ nanowire replica under ammonia atmosphere from 275 to 350 °C, without a distinct lose of the mesostructural regularity. Treating the samples above 375 °C leads to the formation of metallic cobalt and the collapse of the mesostructure due to large volume shrinkage. The other route is to transform mesostructured metal oxides/silica composites to nitrides/silica composites at 750–1000 °C under ammonia. Ordered mesoporous CrN nanowire arrays can be obtained after the silica template removal by NaOH erosion. A slowly temperature‐program‐decrease process can reduce the influence of silica nitridation and improve the purity of final CrN product. Small‐angle XRD patterns and TEM images showed the 2‐D ordered hexagonal structure of the obtained mesoporous CoN and CrN nanowires. Wide‐angle XRD patterns, HRTEM images, and SAED patterns revealed the formation of crystallized metal nitrides. Nitrogen sorption analyses showed that the obtained materials possessed high surface areas (70–90 m² g^?1) and large pore volumes (about 0.2 cm³ g^?1).     

Surfactant‐Free,Self‐Assembled PVA‐Iron Oxide/Silica Core–Shell Nanocarriers for Highly Sensitive,Magnetically Controlled Drug Release and Ultrahigh Cancer Cell Uptake Efficiency

Surfactant‐free, self‐assembled iron oxide/silica core–shell (SAIO@SiO₂) nanocarriers were synthesized as bifunctional magnetic vectors that can be triggered for the controlled release of therapeutic agents by an external magnetic field. In addition, drug release profiles can be well‐regulated through an ultrathin layer of silica shell. The hydrophobic drug molecules were encapsulated within the iron oxide‐PVA core and then further covered with a thin‐layer silica shell to regulate the release pattern. Remote control of drug release from the SAIO@SiO₂ nanocarriers was achieved successfully using an external magnetic field where the core phase being structurally disintegrated to a certain extent while subjected to magnetic stimulus, resulting in a burst release of the encapsulated drug. However, a relatively slow and linear release restored immediately, directly after removal of the stimulus. The nanostructural evolution of the nanocarriers upon the stimulus was examined and the mechanism for controlled drug release is proposed for such a core–shell nanocarrier. Surprisingly, the surfactant‐free SAIO@SiO₂ nanocarriers demonstrated a relatively high uptake efficiency from the HeLa cell line. Together with a well‐regulated controlled release design, the nanocarriers may provide great advantages as an effective cell‐based drug delivery nanosystem for biomedical applications.     

Magnetic/Silica Nanocomposites as Dual‐Mode Contrast Agents for Combined Magnetic Resonance Imaging and Ultrasonography

A simple and efficient method for synthesizing a range of hybrid nanocomposites based on a core of silica nanospheres (160, 330, and 660 nm in diameter) covered by an outer shell of superparamagnetic nanoparticles, either iron oxide or heterodimeric FePt‐iron oxide nanocrystals, is presented. The magnetic and ultrasound characterization of the resulting nanocomposites shows that they have great potential as contrast agents for dual‐mode imaging purposes, combining magnetic resonance imaging (MRI) and ultrasonography (US).     

Controlling The Mobility Of Oligonucleotides In The Nanochannels Of Mesoporous Silica

Oligonucleotides used in gene therapy and silencing are fragile compounds that degrade easily in biological environments. Porous biocompatible carrier particles may provide a useful strategy to deliver these therapeutics to their target sites. Development of appropriate delivery vehicles, however, requires a better understanding of the oligonucleotide‐host interactions and the oligonucleotide dynamics inside carrier particles. We investigated template‐free SBA‐15 type mesoporous silica particles and report their loading characteristics with siRNA depending on the surface functionalization of their porous network. We show that the siRNA uptake capability of the particles can be controlled by the composition of the functional groups. Fluorescence recovery after photobleaching measurements revealed size‐dependent mobility of siRNA and double‐stranded DNA oligonucleotides within the functionalized silica particles and provided evidence for the stability of the oligonucleotides inside the pores. Hence, our study demonstrates the potential of mesoporous silica particles as a means for alternative gene delivery in nanomedicine.     

Reinforcement of a Rubbery Epoxy Polymer by Mesostructured Silica and Organosilica with Wormhole Framework Structures

Mesostructured forms of silica (denoted MSU‐J) and aminopropyl‐functionalized silica (denoted AP‐MSU‐J) with wormhole framework structures are effective reinforcing agents for a rubbery epoxy polymer. At loadings of 2.0–10 wt %, MSU‐J silica with an average framework pore size of 14 nm (65 °C assembly temperature) provides superior reinforcement properties in comparison to MSU‐J silica with a smaller average framework pore size of 5.3 nm (25 °C assembly temperature), even though the surface area of the larger pore mesostructure (670 m² g^?1) is substantially lower than the smaller pore mesostructure (964 m² g^?1). The introduction of 5.0 and 10 mol % aminopropyl groups in the wormhole framework walls decreases the textural properties in comparison to the pure silica analogs. AP‐MSU‐J organosilicas increase the tensile strength as well as the strain‐at‐break of the rubbery epoxy mesocomposites in comparison to MSU‐J silica as a reinforcing agent. The improved toughness provided by the aminopropyl functionalized mesostructures is attributable in part to covalent bond formation between the mesostructured silica walls and the cured epoxy matrix and to a more ductile mesostructure framework in comparison to a pure silica framework. An organosilica derivative containing 20 mol % aminopropyl groups, but lacking a mesostructured framework, provides little or no improvement in polymer tensile properties, demonstrating that an ordered porous network is essential for polymer reinforcement. In general, the reinforcement benefits provided by mesostructures with larger framework pores are superior to those provided by smaller pore derivatives, most likely because of more efficient polymer impregnation of the particle mesopores. The presence of a mesostructured form of the organosilica is essential for improving the mechanical properties of the epoxy polymer.     

One‐Step Synthesis of Highly Ordered Mesoporous Silica Monoliths with Metal Oxide Nanocrystals in their Channels

A simple, one‐step synthetic route to prepare ordered mesoporous silica monoliths with controllable quantities of metal oxide nanocrystals in their channels is presented. The method is based on the assisted assembly effect for mesostructure‐directing of the metal complexes formed by the interaction of metal ions with the –O– groups of copolymers. Highly ordered hexagonal silica monoliths, loaded with various metal oxide nanocrystals, including those of Cr₂O₃, MnO, Fe₂O₃, Co₃O₄, NiO, CuO, ZnO, CdO, SnO₂, and In₂O₃, can be obtained by this one‐step pathway. In the NiO/SiO₂ nanocomposite, nickel oxide nanorods with face‐centered cubic lattices are formed at low doping ratios, and they can be transformed into nanowires by increasing the quantities of the precursors. In the Fe₂O₃/SiO₂ nanocomposites, a one‐dimensional assembly of iron oxide nanoparticles is observed. In the In₂O₃/SiO₂ nanocomposites, single crystal nanowires with high aspect ratios are obtained. For the other metal oxide nanocomposites, including Cr₂O₃, MnO, Co₃O₄, CuO, ZnO, CdO, and SnO, only crystalline nanorods are obtained. N₂ sorption results of the metal oxide/SiO₂ mesostructured nanocomposites reveal that nanocrystals inside the pores do not severely decrease the pore volume or the Brunauer–Emmett–Teller (BET) surface area of the mesoporous silica host. The bandgaps of SnO₂ and In₂O₃ nanocrystals, calculated from UV‐vis spectra, are much larger than the corresponding bulk materials, implying the quantum confinement effect in the small particles. Co₃O₄/SiO₂ mesostructured nanocomposites catalyze the complete combustion of CH₄. These studies provide a new and simple method for templating synthesis of metal oxide nanostructures.     

Template‐Assisted Synthesis of Mesoporous Magnetic Nanocomposite Particles

A new concept is proposed to synthesize mesoporous magnetic nanocomposite particles of great scientific and technological importance. Mesoporous silica coatings were created on micrometer‐sized magnetite (Fe₃O₄) particles using cetyltrimethylammonium chloride micelles as molecular templates. The characterization by transmission electron microscopy (TEM), nitrogen adsorption–desorption, diffuse‐reflectance Fourier‐transform infrared spectroscopy, and zeta‐potential measurements confirmed the deposition of mesoporous silica thin layers on the magnetite particles. The synthesized particles showed a drastic increase in specific surface area with an average pore size of 2.5 nm. The coating material showed a negligible effect on the saturation magnetization of the original particles that were fully protected by silica coatings. The synthesized mesoporous magnetic nanocomposite particles have a wide range of applications in toxin removal, waste remediation, catalysis, reactive sorbents, and biological cell separations.     

Synthesis and Characterization of Positive‐Charge Functionalized Mesoporous Silica Nanoparticles for Oral Drug Delivery of an Anti‐Inflammatory Drug

We synthesized mesoporous silica nanoparticles (MSN) with different densities of surface positive charges. The positive surface charge was generated by incorporating trimethylammonium (TA) functional groups into the framework of MSN (MSN–TA) via direct co‐condensation of a TA‐silane and tetraethoxysilane (TEOS) in the presence of a base as a catalyst. These MSN–TA samples have well‐defined hexagonal structures with an average particle diameter of 100 nm, pore size of 2.7 nm, and surface area of about 1000 m² g^?1. Anionic drug molecules, Orange II (a fluorescent tracing molecule), and sulfasalazine (an anti‐inflammatory prodrug used for bowel disease), were effectively loaded into these MSN–TA samples and remained inside of the MSN–TA under acidic environment (pH 2–5). The amounts of loading of both Orange II and sulfasalazine were increased with increasing positive charge densities resulting from the increasing number of TA groups. When these drug‐loaded MSN–TA nanoparticles were placed in physiological buffer solution (pH 7.4), a partial negative surface charge on the MSN–TA was generated due to the deprotonation of silanol groups, and the strong electrostatic repulsion triggered a sustained release of the loaded molecules. MSN–TA as a nanovehicle for pH‐dependent loading and controllable release of anionic drug molecules can be used as an oral delivery drug systems targeting at intestine. These drugs can be remained trapped in the nanovehicle when passing through the stomach's acidic environment and be released in intestine where the environmental pH is close to neutral.     

Preparation of Highly Ordered Nitrogen‐Containing Mesoporous Carbon from a Gelatin Biomolecule and its Excellent Sensing of Acetic Acid

Novel nitrogen‐containing mesoporous carbon with well‐ordered pores (NMC‐G) and high basicity is synthesized using a low‐cost single‐molecule precursor, gelatin biomolecule, and SBA‐15 as a template via nanocasting method. The obtained materials are thoroughly characterized. It is found that the prepared materials have excellent textural properties such as high specific surface areas, huge pore volumes, and large pore diameters. The pore diameter of the materials can also be controlled with a simple adjustment of the pore diameter of the hard templates. The C/N ratio of the samples is calculated to be ≈6.01, which is slightly higher than that observed for mesoporous carbon nitride samples. X‐ray photoelectron spectroscopy (XPS) reveals the presence of sp² hybridized carbon in aromatic ring structure attached to amino groups. The materials could adsorb a huge quantity of CO₂. The sensing capability of the materials with different pore diameters for different adsorbates including ethanol, acetic acid, aniline, toluene, and ammonia is also investigated. Among the materials with different pore diameters studied, the material with the highest basicity and the largest pore diameter (NMC‐G‐150) showed excellent sensing performance with a high selectivity of adsorption for acetic acid molecule.     

Localized Excitation of Neural Activity via Rapid Magnetothermal Drug Release

Hysteretic heat dissipation by magnetic nanoparticles (MNPs) in alternating magnetic fields (AMFs) allows these materials to act as local transducers of external stimuli. Commonly employed in cancer research, MNPs have recently found applications in remote control of heat‐dependent cellular pathways. Here, a thermally labile linker chemistry is adapted for the release of neuromodulatory compounds from the surfaces of MNPs via local nanoscale heating. By examining a range of MNP sizes, and considering individual particle loss powers, AMF conditions and nanomaterials suitable for rapid and complete release of a payload from MNP surfaces are selected. Local release of allyl isothiocyanate, an agonist of the Ca²⁺ channel TRPV1 (transient receptor potential vanilloid cation channel subfamily member 1), from iron oxide MNPs results in pharmacological excitation of neurons with latencies of ≈12 s. When targeted to neuronal membranes, these MNPs trigger Ca²⁺ influx and action potential firing at particle concentrations three orders of magnitude less than those previously used for magnetothermal neuromodulation accomplished with bulk heating.     

A Multi‐Gradient Targeting Drug Delivery System Based on RGD‐l‐TRAIL‐Labeled Magnetic Microbubbles for Cancer Theranostics

The accurately and efficiently targeted delivery of therapeutic/diagnostic agents into tumor areas in a controllable fashion remains a big challenge. Here, a novel cancer targeting magnetic microbubble is elaborately fabricated. First, the γ‐Fe₂O₃ magnetic iron oxide nanoparticles are optimized to chemically conjugate on the surface of polymer microbubbles. Then, arginine‐glycine‐aspartic acid‐l ‐tumor necrosis factor‐related apoptosis‐inducing ligand (RGD‐l ‐TRAIL), antitumor targeting fusion protein, is precisely conjugated with magnetic nanoparticles of microbubbles to construct RGD molecularly targeted magnetic microbubble, which is defined as RGD‐l ‐TRAIL@MMBs. Such RGD‐l ‐TRAIL@MMBs is endowed with the multigradient cascade targeting ability following by magnetic targeting, RGD, as well as enhanced permeability and retention effect regulated targeting to result in high cancerous tissue targeting efficiency. Due to the highly specific accumulation of RGD‐l ‐TRAIL@MMBs in the tumor, the accurate diagnostic information of tumor can be obtained by dual ultrasound and magnetic resonance imaging. After imaging, the TRAIL molecules as anticancer agent also get right into the cancer cells by nanoparticle‐ and RGD‐mediated endocytosis to effectively induce the tumor cell apoptosis. Therefore, RGD‐l ‐TRAIL conjugated magnetic microbubbles could be developed as a molecularly targeted multimodality imaging delivery system with the addition of chemotherapeutic cargoes to improve cancer diagnosis and therapy.     

Fabrication and Size‐Selective Bioseparation of Magnetic Silica Nanospheres with Highly Ordered Periodic Mesostructure

In this paper, we report a novel synthesis and selective bioseparation of the composite of Fe₃O₄ magnetic nanocrystals and highly ordered MCM‐41 type periodic mesoporous silica nanospheres. Monodisperse superparamagnetic Fe₃O₄ nanocrystals were synthesized by thermal decomposition of iron stearate in diol in an autoclave at low temperature. The synthesized nanocrystals were encapsulated in mesoporous silica nanospheres through the packing and self‐assembly of composite nanocrystal–surfactant micelles and surfactant/silica complex. Different from previous studies, the produced magnetic silica nanospheres (MSNs) possess not only uniform nanosize (90 ～ 140 nm) but also a highly ordered mesostructure. More importantly, the pore size and the saturation magnetization values can be controlled by using different alkyltrimethylammonium bromide surfactants and changing the amount of Fe₃O₄ magnetic nanocrystals encapsulated, respectively. Binary adsorption and desorption of proteins cytochrome c (cyt c) and bovine serum albumin (BSA) demonstrate that MSNs are an effective and highly selective adsorbent for proteins with different molecular sizes. Small particle size, high surface area, narrow pore size distribution, and straight pores of MSNs are responsible for the high selective adsorption capacity and fast adsorption rates. High magnetization values and superparamagnetic property of MSNs provide a convenient means to remove nanoparticles from solution and make the re‐dispersion in solution quick following the withdrawal of an external magnetic field.     

Silica‐Coated Manganese Oxide Nanoparticles as a Platform for Targeted Magnetic Resonance and Fluorescence Imaging of Cancer Cells

Monodisperse silica‐coated manganese oxide nanoparticles (NPs) with a diameter of ～35 nm are synthesized and are aminated through silanization. The amine‐functionalized core–shell NPs enable the covalent conjugation of a fluorescent dye, Rhodamine B isothiocyanate (RBITC), and folate (FA) onto their surface. The formed Mn₃O₄@SiO₂(RBITC)–FA core–shell nanocomposites are water‐dispersible, stable, and biocompatible when the Mn concentration is below 50 µg mL^?1 as confirmed by a cytotoxicity assay. Relaxivity measurements show that the core–shell NPs have a T₁ relaxivity (r₁) of 0.50 mM ^?1 s^?1 on the 0.5 T scanner and 0.47 mM ^?1 s^?1 on the 3.0 T scanner, suggesting the possibility of using the particles as a T₁ contrast agent. Combined flow cytometry, confocal microscopy, and magnetic resonance imaging studies show that the Mn₃O₄@SiO₂(RBITC)–FA nanocomposites can specifically target cancer cells overexpressing FA receptors (FARs). Findings from this study suggest that the silica‐coated Mn₃O₄ core–shell NPs could be used as a platform for bimodal imaging (both magnetic resonance and fluorescence) in various biological systems.     

A Triple‐Collaborative Strategy for High‐Performance Tumor Therapy by Multifunctional Mesoporous Silica‐Coated Gold Nanorods

To integrate treatments of photothermal therapy, photodynamic therapy (PDT), and chemotherapy, this study reports on a multifunctional nanocomposite based on mesoporous silica‐coated gold nanorod for high‐performance oncotherapy. Gold nanorod core is used as the hyperthermal agent and mesoporous silica shell is used as the reservoir of photosensitizer (Al(III) phthalocyanine chloride tetrasulfonic acid, AlPcS₄). The mesoporous silica shell is modified with β‐cyclodextrin (β‐CD) gatekeeper via redox‐cleavable Pt(IV) complex for controlled drug release. Furthermore, tumor targeting ligand (lactobionic acid, LA) and long‐circulating poly(ethylene glycol) chain are introduced via host–guest interaction. It is found that the nanocomposite can specifically target to hepatoma cells by virtue of the LA targeting moiety. Due to the abundant existence of reducing agents within tumor cells, β‐CD can be removed by reducing the Pt(IV) complex to active cisplatin drug for chemotherapy, along with the releasing of entrapped AlPcS₄ for effective PDT. As confirmed by in vitro and in vivo studies, the nanocomposite exhibits an obvious near‐infrared induced thermal effect, which significantly improves the PDT and chemotherapy efficiency, resulting in a superadditive therapeutic effect. This collaborative strategy paves the way toward high‐performance nanotherapeutics with a superior antitumor efficacy and much reduced side effects.     

Multifunctional Mesoporous Silica Material Used for Detection and Adsorption of Cu2+ in Aqueous Solution and Biological Applications in vitro and in vivo

An inorganic–organic silica material (SBA–P2), prepared by immobilization of the 1,8‐naphthalimide‐based receptor P2 within the channels of the mesoporous silica material SBA‐15, is characterized by transmission electron microscopy and several spectroscopic methods. SBA–P2 features a high affinity Cu²⁺‐specific fluorescence response in aqueous solution with a detection limit for Cu²⁺ of ca. 0.65 ppb (10 × 10^?9 M ) under optimized conditions. It can extract Cu²⁺ from the solution with only trace amounts remaining. Through isolating of the toxic ions within the mesopores of the silica, SBA–P2 has the potential to work as a toxicide for Cu²⁺ in living systems. The fluorogenical responses are reversible and do not vary over a broad (4.0 to 9.0) pH range suitable for application under physiological conditions. The fluorescence responses of Cu²⁺ in vitro (human breast cancer cells) and in vivo (five‐day‐old zebrafish) demonstrate the possibility of further application in biology.