Dyeing,fastness, and deodorizing properties of cotton,silk, and wool fabrics dyed with coffee sludge (Coffea arabica L.) extract

A natural colorant was extracted from Coffea arabica L., using water as extractant at 90°C for 90 min. Studies have been made on the dyeing, color fastness, and deodorization properties of cotton, silk, and wool fabrics dyed with Coffea arabica L. extract solutions. The best mordants were found to be FeSO_4, CuSO₄, and SnSO₄ for improving the color strength (K/S) of cotton, silk, and wool fabrics. Mordants MnSO₄, ZnSO₄, and NiSO₄ for cotton (Rating 3), and all mordants except MnSO₄ for silk (Rating 3), mordants CuSO₄, FeSO₄, CoSO₄, Al₂(SO₄)₃, and MnSO₄ for wool (Rating 4) were the best mordants to improve the light fastness. It was found that FeSO₄ and CuSO₄ were the best mordants for the improvements of color strength (K/S) and light fastness for silk and wool fabrics. In addition, it was found that cotton, silk, and wool fabrics dyed with the Coffea arabica L. extract showed good deodorization performance. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 251–257, 2007     

An innovative approach to the preparation of coloured and multifunctional silk material with the natural extracts from chestnut shell and black rice bran

In order to reutilise the byproducts of foods and crops to benefit the environment and economise on resources, the natural extracts from chestnut shell and black rice bran were applied in the simultaneous dyeing and multifunctionalisation of silk fabrics. In this work, the influence of pH value on dyeing properties was studied. The effects of the ratio of chestnut shell and black rice bran extracts and the application of mordants (aluminium potassium sulphate and ferrous sulphate) on the dyeing performance as well as anti-ultraviolet and antioxidant properties of treated silk were also discussed. The results showed that deep-coloured silk fabrics can be obtained when dyed with the two natural extracts as the pH value of the dyebath approached 3. The ratio of the two natural extracts and the use of the mordants have significant effects on colour depth, colour hue, colour fastness, and the functionalities of dyed silk fabrics. Combination dyeing and mordanting are able to enrich the colour hues of dyed fabrics. The washing, rubbing, and light fastness of the dyed fabrics after mordanting can be rated higher than grade 4. Moreover, the silk after combination dyeing has good UV protection performance (UPF > 30) and antioxidant activity. In addition, the functionalities of treated fabrics showed excellent washing fastness. This study reveals that chestnut shell and black rice bran extracts are suitable as natural colourants and multifunctional finishing agents for the preparation of coloured and multifunctional silk materials.     

Reactive dyeing of silk using commercial acid dyes based on a three‐component Mannich‐type reaction

Acid dyes are employed for commercially dyeing silk, which results in ionic bonds between the silk fibroin and the dye. This generally leads to low wet fastness properties for dyed silk fabrics. In this work, three commercial acid dyes with aromatic primary amine structures were selected to dye silk using a Mannich‐type reaction, resulting in improved wet fastness of dyed silk by forming covalent bonds between silk fibroin and dye. The Mannich‐type reactive dyeing was applied to silk fabrics at both 30 and 90°C in trials. Dyeing at 90°C can shorten the dyeing time compared with dyeing at 30°C, even although dye exhaustion and relative fixation at 90°C were a little lower. The dyeing process was optimised when the dyeing temperature was 90°C, dyebath pH 4, dye‐to‐formaldehyde ratio 1:30 and holding dyeing time 60 minutes. The results showed that the dye exhaustion on silk fabrics for the three aromatic primary amine‐containing acid dyes exceeded 94% and their relative fixation was over 80%. Their washing and rubbing fastness reached grade 4 or higher. Hence, the colour fastness properties of dyed silk fabrics using the Mannich‐type reactive dyeing method is superior to the conventional acid dyeing method using the same aromatic primary amine‐containing acid dyes. The Mannich‐type reactive dyeing for silk fabrics at 90°C can be developed into a novel and rapid reactive dyeing method, promising an effective dyeing process with excellent colour fastness.     

The evaluation of procedures for dyeing silk with buckthorn and walloon oak on the basis of colour changes and fastness characteristics

In this study, silk fabric samples were dyed according to various procedures with buckthorn (Rhamnus petiolaris Boiss) and walloon oak (Quercus ithaburensis Decaisne) extracts. Reversed‐phase high‐performance liquid chromatography with diode‐array detection was utilised for the identification of dyes present in the dyed silk fabrics and the plant extracts. The extraction of dyes was carried out with a hydrochloric acid/methanol/water (2:1:1; v/v/v) mixture. The colour coordinates of the silk fabrics were measured, and the rubbing, wash and light fastness properties of the dyed silk materials were determined and are discussed.     

A method for dyeing cotton fabric with anthocyanin dyes extracted from mulberry (Morus rubra) fruits

For the first time, the natural anthocyanin dyes (mainly consisting of cyanidine 3‐glycoside) extracted from mulberry (Morus rubra) fruits has been successfully used to dye cotton fabric, with a dyeing property performance good enough for potential commercial applications. In this study, succinic acid was firstly incorporated into cotton fabrics by esterification to the hydroxyl groups of cellulose, forming an anionic site for the dyes. The performance of the modified material was characterised by Fourier transform infrared spectroscopy and tensile strength. Results showed that the tensile strength of cotton fabrics was mostly retained after modification. The anthocyanin extracts from mulberry fruits were used to study the dyeability of the control and modified cotton fabrics. Red and deep purple (aubergine) are two main shades of cotton fabrics dyed with mulberry fruit extracts. Most importantly, aubergine shade is rare in cotton fabrics dyed with natural dyes. Modification with succinic acid clearly increased the colour strength of the dyed cotton fabric. The colour strength of dyed cotton fabric was improved from 2.7 to 5.3 in the case of dyeing without mordants, and from 3.2 to 6.9 in the case of dyeing with tin mordanting. Meanwhile, the colour fastness was improved by 0.5–2 grades with increasing succinic acid concentration in the finish solution. The colour fastness to perspiration, crocking, light, and washing of fabric dyed with simultaneous tin mordanting and modified with 30 g l^?1 of succinic acid was found to be acceptable, with a grey scale grade of at least 3. As for home laundering, neutral soapy solution was more acceptable than alkaline soapy solution.     

Colorimetric and fastness studies and analysis by reversed‐phase high‐performance liquid chromatography with diode‐array detection of the dyeing of silk fabric with natural dye Helichrysum arenarium

In this study, silk fabric samples were dyed by various procedures using Helichrysum arenarium extracts. Alum, ferrous sulfate, stanium chloride, calcium nitrate, and potassium bitartrate were used as mordants. Reversed‐phase high‐performance liquid chromatography with diode‐array detection was utilised for identification of the dyes present in the dyed silk fabrics and the plant extracts. The extraction of dyes was carried out with a hydrochloric acid/methanol/water (2:1:1 v/v/v) mixture. The colour coordinates and K/S values, as well as wash, light, and rub fastness, were determined.     

Natural dyeing with anthocyanins from Hibiscus rosa sinensis flowers

A new approach for natural dyeing with anthocyanin has been discussed along with a convenient method of extraction. Anthocyanin from Hibiscus flowers has been extracted by developing a method using methanolic solution of 4% citric acid. The new method gave better yield of anthocyanin as compared with methanolic solution of 0.1% hydrochloric acid. It has been also shown that pH of the extract plays an important role on the dye, thus by adjusting the pH of the extract at 4, dyeing of cotton and silk together with metal mordanting gave different colors. The best dyeing results were obtained for stannous mordanted fabrics in terms of fastness properties. The role of metal ion complexation of stannous salt with the dye extract has been confirmed through UV‐Vis and FTIR spectra. Antioxidant activity of the anthocyanin extract seemed to have contributed to enhance the fastness properties of the dyed fabrics. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Pretreatment of cotton fabrics with polyamino carboxylic acids for salt‐free dyeing of cotton with reactive dyes

In this study, polyamino carboxylic acids have been used to improve the dyeability of cotton in a salt‐free reactive dyeing process. These polyamino carboxylic acids were prepared by partial carboxylation of polyvinylamine. Cotton fabric was pretreated with polyamino carboxylic acids and dyed with reactive dyes. The colour strengths of the dyed fabrics were evaluated by measuring the K/S values. The fastness properties (washing, rubbing and light fastness) of the dyed cotton fabrics were also measured. The pretreatment of cotton with polyamino carboxylic acids creates positive charges on the fabric surface. In this way, salt‐free reactive dyeing of cotton or dyeing with only a small amount of electrolyte is possible.     

Cetylpyridinium chloride cationic finishing improves the dyeing and antibacterial properties of madder dyed cotton

In this work, after cationic pretreatment of cotton fabric with cetylpyridinium chloride (CPC), the compound of citric acid (CA) and succinic acid (SUA) were used as crosslinking agents to dye cotton fabrics with natural madder dye to improve the dyeing and antibacterial properties and realise the multifunctional finishing of cotton fabric. The effects of mordant dyeing, CA + SUA crosslinked dyeing, and CPC/CA + SUA crosslinked dyeing on the microstructure and properties of cotton fabrics were compared. The dyeing by the three processes occurred primarily in the amorphous zone of the fibres, and all kept the original crystalline form of the cotton. CA + SUA crosslinked dyeing and CPC/CA + SUA crosslinked dyeing increased the thermal stability of the cotton fabric. CPC/CA + SUA crosslinked dyed cotton obtained excellent dyeing results with the colour depth value (K/S) of 12.3 and rubbing fastness and washing fastness of levels 4–5, and the levelness and dye permeability were acceptable. Furthermore, the antibacterial rate against Escherichia coli and Staphylococcus aureus reached 99.99%, and the ultraviolet protection factor (UPF) reached 50+. Moreover, the wrinkle recovery angle (WRA) increased by 55% compared with raw cotton. This showed that CPC/CA + SUA crosslinked dyed cotton had excellent antibacterial, anti-ultraviolet, and anti-wrinkle performances.     

The colour and fastness of natural saffron

Cotton and wool fabrics have been dyed with the aqueous extract of saffron containing α-crocin as the main colorant species. The dyeings were carried out with and without metal salts as mordants. The wash and light fastness of the dyed fabrics was studied. The colour of the fabrics was investigated in terms of CIE L* C* H* values.     

Synthesis of sulfated β‐cyclodextrin/cotton/ZnO nano composite for improve the antibacterial activity and dyeability with Azadirachta indica

The sulfated β‐cyclodextrin (sb‐cd) was prepared from β‐cyclodextrin and the sb‐cd was crosslinked with cotton fabric using ethylenediaminetetraacetic acid (EDTA) as crosslinker. After crosslinking, the synthesized ZnO nanoparticles were padded on this fabric surface. Then, the treated fabrics were dyed with neem extract. The synthesized polymer, crosslinked and nanoparticle‐treated cotton fabrics were characterized using fourier transform infrared spectroscopy (FTIR), X‐ray diffraction (XRD), particle sized analyzer, and transmission electron microscopy (TEM) studies. The antibacterial test was done against Staphylococcus aureus and Escherichia coli bacterium. The composite coated with neem dyed cotton fabric has exhibited 71% of dye uptake with 2–3 fastness grade and it has 99% of antibacterial efficiency for S. aureus and 97% for E. coli bacterium. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Mechanical Properties and Stability to Light Exposure for Dyed Egyptian Cotton Fabrics with Natural and Synthetic Dyes

Synthetic dyes are more available than natural dyes were in the past, because of lower prices and wider ranges of bright shades with considerably improved color fastness properties. In current years, concern for the environment has created an increasing demand for natural dyes, which are friendlier to the environment than are synthetic dyes. The aim of this work is to study the effect of dyeing cotton fabrics with both a natural dye (henna) and a synthetic dye (Remazol blue) on some mechanical properties and those of stability to light exposure. The undyed and dyed cotton fabrics were tested for their mechanical behaviors expressed as tenacity (N), elongation %, and work-breaking (N · m). They were also tested for shrinkage and crease recovery angle. The stability to light before and after 100 h exposure was examined by investigating the microstructure [using x-ray diffraction (XRD)] and macrostructure [using a scanning electron microscope (SEM)] and the reflection spectra. The results proved that the cotton samples dyed with Henna dye have higher mechanical properties than those dyed with “Remazol” reactive dye. Moreover, the light fading behaviors of both synthetic and natural dyes were studied in terms of the reflection spectra (400–800 nm), microstructure, and macrostructure of the sample's fibers.     

Fixation of cationic P (st‐BA‐AA‐GMA) emulsion on pigment particles in dyeing of cotton fabrics

Cationic copolymer emulsions of St, BA, AA, and GMA were successfully synthesized via semi‐continuous emulsion polymerization. The properties of synthesized cationic emulsions were characterized by monomer conversion and solid content, differential scanning calorimeter, particle size and distribution, zeta potential, and centrifugal stability. The film performance of the cationic emulsions formed on cotton fiber surface was observed by scanning electricity microscopy. The influence of cationic emulsions on the color data, K/S values and rubbing fastness of dyed cotton fabrics was also investigated. The results show that P (St‐BA‐AA‐GMA) emulsion had larger particle size and higher zeta potential than P (St‐BA‐AA) emulsion. When the films were formed at room temperature, P (St‐BA‐AA‐GMA) emulsion film had better performance than P (St‐BA‐AA) emulsion film. The addition of GMA monomers improved the film performance. P (St‐BA‐AA‐GMA) emulsion films formed at 120 °C after acetic acid solution treatment had the best water resistance. Dyed cotton fabrics pretreated with P (St‐BA‐AA‐GMA) emulsion had better pigment dyeing performance than those pretreated with P (St‐BA‐AA) emulsion. It demonstrates that the addition of GMA monomers further improved the effect of pigment dyeing for cotton fabrics with cationic emulsions as binders. With the increase of P (St‐BA‐AA‐GMA) concentration, the color performance of dye fabrics improved while the rubbing fastness decreased a little. But, the handle and fastness still meets the use standards for consumers. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 44987.     

Digital and conventional printing and dyeing with the natural dye annatto: optimisation and standardisation processes to meet future demands

The plant colorant annatto was investigated to determine its potential use as a natural dye for conventional and novel textile applications. Alum was selected as a mordant. Different techniques of mordanting and a broad set of variations in the dyeing recipes were applied to achieve optimisation and an improvement in colour fastness properties. Quality control of all dyeings was performed using standard fastness tests and colour measurements. Printing of cotton fabrics was also achieved with annatto using the flatbed screen‐printing technique. Measurement of the rheological and physical properties of the annatto printing paste confirmed its stability and suitability for conventional printing. Fastness properties of the conventionally printed annatto fabric were also measured. A novel water‐based digital printing ink using annatto was prepared and applied to cotton fabric using a digital printing application. The physical properties of the annatto ink‐jet ink were also measured. Wash, light and rub fastness properties of the annatto digitally printed fabric were determined and compared with those of conventional printing methods. The results were promising for annatto as a natural colorant, which possibly paves the way for the development of a new range of natural environmentally friendly dyes.     

Synthesis and application to cellulose of reactive dye precursor of anti‐bacterial N‐halamine

To achieve textile dyeing and functional finishing in one process, a bleach‐resistant reactive dye precursor to anti‐bacterial N‐halamine was synthesised by reacting a type of dichlorotriazine reactive dye with 4‐amino‐2,2,6,6‐tetramethylpiperidine. The synthesised compound, which can be transformed to an N‐halamine molecule by exposure to dilute bleach solution, was used to dye cotton fabrics. After exposure to a dilute sodium hypochlorite solution, dyed cotton fabrics showed excellent anti‐bacterial properties against Staphylococcus aureus and Escherichia coli O157:H7, facilitating a ca. 6‐log reduction in bacteria within a short period of contact. Compared with the dichlorotriazine reactive dye, the reactive dye precursor demonstrated comparable dyeing properties including exhaustion and fixation values. No differences in rub fastness, wash fastness or bleach fastness were detected between fabrics dyed with, respectively, dichlorotriazine reactive dye and the reactive dye precursor to N‐halamine.     

Electrostatic self‐assembly dyeing of cotton fabrics

A new approach to the dyeing of cotton fabrics using an electrostatic self‐assembly method was evaluated. Cotton fabrics were pretreated with 2,3‐epoxypropyltrimethylammonuium chloride and cationic charges were produced on the fabric surfaces. For the dyeing of cotton fabric, reactive and acid dyes were used. Oppositely charged anionic reactive/acid dyes and cationic poly(diallyldimethylammonium chloride) were alternately deposited on the surface of cationised cotton fabrics. Ten multilayer films of dye/poly(diallyldimethylammonium chloride) were deposited on the cotton fabric surfaces using a padder. The build‐up of the multilayer films and the level of colour strength (K/S) achieved are discussed. Samples of cotton fabrics were also dyed with the same dyes, but using the exhaust method, and both types of dyed samples were compared. The washing, rubbing and light fastness properties were evaluated for the dyed fabrics.     

Dyeing properties of textiles by Turkish hazelnut (Corylus colurna): leaves,coat, shell and dice

Turkey has a great number of hazelnut trees that possess nutritious components. However, only the inside part of the hazelnut is used as a nutrient, while the rest of it is waste. This study suggests that the waste parts of the Turkish hazelnut could be used as a natural dye for dyeing textile fabrics. The dyeing properties of the leaves, coat, shell and dice of the hazelnut were studied on wool, cotton and viscose fabric by using three different mordants: copper sulphate, iron sulphate and aluminium sulphate. The selected dyed fibre sample surfaces were observed using a scanning electron microscope. The colour strength (K/S), light, washing, rubbing, and perspiration fastness levels of the dyed fabrics were investigated. The experimental natural dyeing results indicate that waste hazelnut‐based products can be used as a natural dye for textile coloration.     

合成纤维及其混纺纤维用染料的研究 Ⅰ.用于锦纶染色的含β-羟乙基砜硫酸酯基活性分散染料

本文综合了应用于锦纶染色的弱酸性染料酸性浴上色的高竭染率,活性染料与纤维的共价键结合,分散染料在纤维上迁移、匀染、盖染性好等优点,提出一类含β-羟乙基砜硫酸酯基的活性分散染料。用分子较小的分散染料结构,以含β-羟乙基砜硫酸酯为活性基;在弱酸性浴中染色,再在弱碱性浴中与聚酰胺纤维反应成共价键结合。 合成了一系列偶氮型和蒽醌型染料。进行了合成工艺、对锦纶的染色性能以及染色锦纶的牢度等试验。并讨论了染料与聚酰胺纤维的结合 这类染料可用于锦纶66和锦纶6丝纺、弹力锦纶丝和针织品,还可用于桑丝、柞丝及其与人造丝的提花织物。这类染料在锦纶上色泽鲜艳,竭染率较高,益染性优良,耐晒、耐湿处理等牢度较好,适于各种锦纶织物的染色。这类活性分散染料,具有酸性染料、活性染料和分散染料染锦纶的主要特点。     

Investigation into the effect of a plant‐derived stabiliser on the light and wash fastness of sulphur‐dyed cotton and nylon fabrics

In this study, cotton fabric and nylon fabric were dyed with a range of commercial sulphur dyes and the light and wash fastness of the coloured fabrics was investigated. The effect of after‐treating the coloured cotton and nylon fabrics with a tannin‐based commercial product, Bayprotect Cl, in the presence or absence of sodium sulphate in the treatment bath, was found to significantly improve the light fastness of the sulphur‐dyed cotton, and the photoprotective effect was partially stable to ISO 105‐C06 washing. In addition, the tannin‐based after‐treatment also improved the colour stability of the dyed fabrics to the perborate‐based ISO 105‐C06 washing. The possible mechanisms for the improved fastness properties are also discussed. The application of sulphur dyes to nylon is potentially commercially useful but has been limited because of the reported poor light fastness of the dyeings. The photoprotective effect of the tannin‐based after‐treatment was investigated with a view to providing the necessary commercial performance. However, it was established that on this fibre, the light fastness improvement was marginal, and the associated wash fastness to oxidative bleach‐based ISO 105‐C06 washing was limited.     

The effect of mordant salts on antibacterial activity of wool fabric dyed with pomegranate and walnut shell extracts

Natural dyes have attracted increasing worldwide attention because of the carcinogenicity and environmental effects of synthetic dyes. In this study, wool fabric was treated with tannin‐rich extracts of Punica granatum peel and walnut shell in combination with some mordants. The effect of various mordants on the colorimetric and antibacterial properties of wool fabrics was investigated. The results showed that pretreatment with metallic mordants substantially improved the dyeing and fastness properties of wool fabrics. The extracts of Punica granatum peel and walnut shell showed a significant antibacterial activity at 5% concentration. In addition, antibacterial activity was dramatically enhanced using metallic salts. The antibacterial activity of samples dyed with natural dyes and without any mordant was not good, while the mordanted samples with copper, aluminum and tin salts obtained considerable antimicrobial properties following lightening and washing fastness. The extracts of Punica granatum peel and walnut shell can be considered as viable alternatives instead of artificial antibacterial agents for hospital textiles as well as an effective anti‐odour agent for sports and household textiles.