Modification of polysulfone membranes via surface‐initiated atom transfer radical polymerization and their antifouling properties

Surface‐initiated atom transfer radical polymerization (ATRP) was used to tailor the functionality of polysulfone (PSF) membranes. A simple one‐step method for the chloromethylation of PSF under mild conditions was used to introduce surface benzyl chloride groups as active ATRP initiators. Covalently tethered hydrophilic polymer brushes of poly(ethylene glycol)monomethacrylate and 2‐hydroxyethyl methacrylate and their block copolymer brushes were prepared via surface‐initiated ATRP from the chloromethylated PSF surfaces. A kinetic study revealed that the chain growth from the membranes was consistent with a controlled process. X‐ray photoelectron spectroscopy was used to characterize the surface‐modified membrane after each modification stage. Protein adsorption experiments revealed substantial antifouling properties of the grafted PSF membranes in comparison with the those of the pristine PSF surface. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Preparation of monodispersed and lipophilic attapulgite and polystyrene nanorods via surface‐initiated atom transfer radical polymerization

A new kind of initiator, 3‐(2‐bromo‐2‐methylacryloxy)propyltriethysiliane (MPTS‐Br), was prepared with a simply hydrobrominated commercial silane coupling agent (3‐methacryloxy‐proplytriethysilane, MPTS). It has been one‐step self‐assemble onto the surface of attapulgite (ATP) nanorods in the dispersion system, and by using this initiator‐modified nanorod (MPTS‐Br‐modified ATP nanoparticles, ATP‐MPTS‐Br) as macroinitiator for atom transfer radical polymerization (ATRP). Structurally well‐defined homopolymer polystyrene (PS) and block polymer poly(styrene‐b‐methyl methacrylate) (PS‐b‐PMMA) chains were then grown from the needle‐shaped nanorods surface to yield monodispersed nanorods composed of ATP core and thick‐coated polymer shell (ATP and PS). The graft polymerization parameters exhibited the characteristics of a controlled/”living” polymerization. The PS‐grafted ATP nanorods could be dispersed well in organic solvent with nanoscale. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

High‐molecular‐weight polyacrylonitrile by atom transfer radical polymerization

A single‐pot atom transfer radical polymerization was used for the first time to successfully synthesize polyacrylonitrile with a molecular weight higher than 80,000 and a narrow polydispersity as low as 1.18. This was achieved with CuBr/isophthalic acid as the catalyst, 2‐bromopropionitrile as the initiator, and N,N‐dimethylformamide as the solvent. The effects of the solvent on the polymerization of acrylonitrile were also investigated. The induction period was shorter in N,N‐dimethylformamide than in propylene carbonate and toluene, and the rate of the polymerization in N,N‐dimethylformamide was fastest. The molecular weight of polyacrylonitrile agreed reasonably well with the theoretical molecular weight in N,N‐dimethylformamide. When chlorine was used in either the initiator or the catalyst, the rate of polymerization showed a trend of decreasing, and the molecular weight deviated from the theoretical predication significantly. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 3372–3376, 2006     

Synthesis and photoinduced surface‐relief grating of well‐defined azo‐containing polymethacrylates via atom transfer radical polymerization

A well‐defined photoresponsive polymethacrylate containing azo chromophores, poly[6‐(4‐phenylazophenoxy)hexylmethacrylate] [Poly(PPHM)], was prepared with azo‐based monofunctional and difunctional initiators via atom transfer radical polymerization in the presence of CuCl/1,1,4,7,10,10‐hexamethyltriethylenetetramine. The polymerizations with first‐order kinetics were well controlled with theoretical expected molecular weight and narrow molecular weight distributions in two initiation systems. The UV absorption intensities of the poly (PPHM)s increased with increasing molecular weight of the poly(PPHM)s in all cases. The 80‐nm surface‐relief gratings with 2.7% efficient diffraction formed on the poly (PPHM) film surface were obtained with a linearly polarized krypton laser with 10 min of irradiation at a recording beam intensity of 188 mW/cm² with a wavelength of 413.1 nm. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Polystyrene‐block‐polylactide obtained by the combination of atom transfer radical polymerization and ring‐opening polymerization with a commercial dual initiator

A polystyrene (PS)‐b‐polylactide (PLA) block copolymer was prepared from the combination of atom transfer radical polymerization and ring‐opening polymerization with commercially available 2,2,2‐tribromoethanol as a dual initiator in a sequential two‐step procedure. Hydroxyl‐terminated polystyrene (PS‐OH)s with various molecular weights were first prepared with polydispersity indices lower than 1.3; these provided valuable macroinitiators for the polymerization of D,L ‐lactide. A block copolymer with a composition allowing the formation of hexagonally packed PLA cylinders in a PS matrix was then obtained. The PS‐b‐PLA thin films revealed, after vapor solvent annealing, a hexagonally packed organization of the PLA cylinders, which was oriented perpendicularly to the surface of the film. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Grafting of titanium dioxide microspheres with a temperature‐responsive polymer via surface‐initiated atom transfer radical polymerization without the use of silane coupling agents

Titania microspheres with narrow size distribution and diameters of about 1 µm were prepared and subsequently functionalized using surface‐initiated atom transfer radical polymerization (ATRP) of N‐isopropylacrylamide. The ATRP initiator was immobilized on the particle surface via acylation of surface hydroxyl groups with α‐bromoisobutyryl bromide. Subsequently, an established ATRP reaction system was used for the preparation of titania surface‐grafted poly(N‐isopropylacrylamide) (PNiPAAm). Characterization was performed with electron microscopies, X‐ray diffraction, infrared spectroscopy and dynamic light scattering. It was found that the particle size in aqueous dispersions changed reversibly with temperature as expected for a shell of PNiPAAm, a polymer with a lower critical solution temperature at 32 °C. This confirmed the successful preparation of functional, stimuli‐responsive TiO₂ microparticles via a straightforward controlled surface‐initiated polymerization method.     

Effects of the solvent polarity on the atom transfer radical polymerization of methyl methacrylate initiated by 4‐(chloromethyl)phenyltrimethoxysilane

The controllability of the atom transfer radical polymerization of methyl methacrylate in the polar solvent N,N‐dimethylformamide and the nonpolar solvent xylene with 4‐(chloromethyl)phenyltrimethoxysilane as an initiator and with CuCl/2,2′‐bipyridine and CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as catalyst systems was studied. Gel permeation chromatography analysis established that in the nonpolar solvent xylene, much better control of the molecular weight and polydispersity of poly(methyl methacrylate) was achieved with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system than with the CuCl/2,2′‐bipyridine as catalyst system. In the polar solvent N,N‐dimethylformamide, unlike in xylene, the polymerization was more controllable with the CuCl/2,2′‐bipyridine catalyst system than with the CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine catalyst system. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 2751–2754, 2007     

Preparation and characterization of polyaniline N‐grafted with poly(ethyl acrylate) synthesized via atom transfer radical polymerization

Polyaniline (PANI) N‐grafted with poly(ethyl acrylate) (PEA) was synthesized by the grafting of bromo‐terminated poly (ethyl acrylate) (PEA‐Br) onto the leucoemeraldine form of PANI. PEA‐Br was synthesized by the atom transfer radical polymerization of ethyl acrylate in the presence of methyl‐2‐bromopropionate and copper(I) chloride/bipyridine as the initiator and catalyst systems, respectively. The leucoemeraldine form of PANI was deprotonated by butyl lithium and then reacted with PEA‐Br to prepare PEA‐g‐PANI graft copolymers containing different amounts of PEA via an N‐grafting reaction. The graft copolymers were characterized by Fourier transform infrared spectroscopy, elemental analysis, and thermogravimetric analysis. Solubility testing showed that the solubility of PANI in chloroform was increased by the grafting of PEA onto PANI. The morphology of the PEA‐g‐PANI graft copolymer films was observed by scanning electron microscopy to be homogeneous. The electrical conductivity of the graft copolymers was measured by the four‐probe method. The results show that the conductivity of the PANI decreased significantly with increasing grafting density of PEA onto the PANI backbone up to 7 wt % and then remained almost constant with further increases in the grafting percentage of PEA. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Surface‐initiated atom transfer radical polymerization of regenerated cellulose membranes with thermo‐responsive properties

Using atom transfer radical polymerization (ATRP), thermo‐responsive regenerated cellulose membranes were synthesized. Regenerated cellulose membranes were firstly modified by reacting the hydroxyl groups on the surface with 2‐bromoisobutyryl bromide, followed by grafting with poly(N‐isopropylacrylamide). The membranes had obvious thermally modulated permeability properties. Analysis was carried out by means of X‐ray photoelectron spectroscopy, attenuated total reflection Fourier transform infrared spectroscopy, scanning electron microscopy and thermogravimetric analysis. The results showed that N‐isopropylacrylamide had been grafted successfully on the surface of the regenerated cellulose membranes. The thermally modulated permeability properties of the grafted membranes were studied using water flux measurements. It was found that the thermally modulated permeability properties of a cellulose surface can be tailored by the use of the ATRP method. Copyright © 2010 Society of Chemical Industry     

Synthesis of polyacrylonitrile via reverse atom transfer radical polymerization initiated by 1,1,2,2‐tetraphenyl‐1,2‐ethanediol/FeCl3/triphenylphosphine

FeCl₃ coordinated by triphenylphosphine was first used as the catalyst in the 1,1,2,2‐tetraphenyl‐1,2‐ethanediol‐initiated reverse atom transfer radical polymerization of acrylonitrile. A FeCl₃/triphenylphosphine ratio of 0.5 not only gave the best control of the molecular weight and its distribution but also provided a rather rapid reaction rate. The rate of polymerization increased with increasing polymerization temperature, and the apparent activation energy was calculated to be 62.4 kJ/mol. When FeCl₃ was replaced with CuCl₂, the reverse atom transfer radical polymerization of acrylonitrile did not show prominent living characteristics. To demonstrate the active nature of the polymer chain end, the polymers were used as macroinitiators to advance the chain‐extension polymerization in the presence of a CuCl/2,2′‐bipyridine catalyst system via a conventional atom transfer radical polymerization process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 4041–4045, 2007     

原子转移自由基乳液聚合研究进展

原子转移自由基聚合(ATRP)作为一种可控/活性聚合方法,可对聚合物结构进行精确控制;乳液聚合以水作为分散介质,具有经济、环保等特点。因此,乳液ATRP结合了两者的优点,具有工业化生产的潜力。首先分析了影响乳液ATRP的各种因素,然后综述了正向ATRP、RATRP(反向ATRP)、SR&NI ATRP(正向/反向同时进行的ATRP)和AGET ATRP(电子转移活化剂ATRP)等机制及研究进展,最后对乳液ATRP的发展方向进行了展望。     

N-水杨醛缩二乙烯三胺作为配体催化原子转移自由基聚合

采用水杨醛和二乙烯三胺反应合成用于原子转移自由基聚合的新型配体——N-水杨醛缩二乙烯三胺,通过元素分析和核磁共振表征N-水杨醛缩二乙烯三胺,以乙-溴代丙酸乙酯（EBP）为引发剂,用N-水杨醛缩二乙烯三胺催化合成聚甲基丙烯酸甲酯（PMMA）,并采用凝胶渗透色谱（GPC）测其相对分子质量及其分布,考察聚合体系的动力学.结果表明：甲基丙烯酸甲酯（MMA）/EBP/溴化亚铜/N-水杨醛缩二乙烯三胺体系和MMA/EBP/溴化亚铜/N-水杨醛缩二乙烯三胺/N,N-二甲基甲酰胺（DMF）体系的原子转移自由基聚合符合一级动力学规律,且具有＂活性＂和可控性,相对分子质量分布较窄（前者为1.46,后者为1.34）,加入溶剂后,催化活性和自由基浓度均有所下降.     

Structure and properties of tailor‐made poly(ethyl acrylate)/clay nanocomposites prepared by in situ atom transfer radical polymerization

An in‐depth study was carried out on the structure and properties of a series of poly(ethyl acrylate)/clay nanocomposites prepared by in situ atom transfer radical polymerization (PNCIs) with well‐defined molecular weights and narrow molecular weight distributions. Wide‐angle X‐ray diffraction and transmission electron microscopy studies revealed an exfoliated clay morphology, whereas conventional solution blending generated an intercalated structure. The storage moduli of the PNCIs showed a moderate increase over that of the neat polymer [poly(ethyl acrylate)]. The sample containing 4 wt % clay (PNCI4, where the number following PNCI indicates the weight percentage of clay) exhibited the highest improvement (31.9% at 25°C). In PNCIs, the β‐transition temperature showed a remarkable decrease (by 175% in PNCI4) along with a shift toward higher temperatures. This indicated the probability of the anchoring of the ? OH group of the clay layers to the >C?O group of the pendant acrylate moiety, which was also confirmed by Fourier transform infrared analysis. Rheological measurements indicated a significant increase in the shear viscosity [by 9% in PNCI2, 15% in PNCI4, and 6% in the poly(ethyl acrylate)/clay nanocomposite with 2 wt % clay prepared by solution blending]. The PNCIs registered enhanced thermal stability, as indicated by the shift in the peak maximum temperature (388 and 392°C for the neat polymer and PNCI4, respectively) and a decrease in the rate of degradation (by 3.5% in PNCI2, 10.2% in PNCI4, and 49.3% in PNCI6). © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Graft copolymerization of methyl methacrylate with an N‐substituted maleimide–liquid‐crystalline copolymer by atom transfer radical polymerization

The synthesis of novel copolymers consisting of a side‐group liquid‐crystalline backbone and poly (methyl methacrylate) grafts were realized by the use of atom transfer radical polymerization (ATRP). In the first stage, the bromine‐functional copolymers 6‐(4‐cyanobiphenyl‐4′‐oxy)hexyl acrylate and (2,5‐dioxo‐2,5‐dihydro‐1H‐pyrrole‐1‐yl)methyl 2‐bromopropanoate were synthesized by free‐radical polymerization. These copolymers were used as initiators in the ATRP of methyl methacrylate to yield graft copolymers. Both the macroinitiator and graft copolymers were characterized by ¹H‐NMR, gel permeation chromatography, differential scanning calorimetry, and thermogravimetric analysis. The ATRP graft copolymerization was supported by an increase in the molecular weight of the graft copolymers compared to that of the macroinitiator and also by their monomodal molecular weight distribution. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of poly(n‐butyl methacrylate)‐b‐polystyrene diblock copolymers by atom transfer radical emulsion polymerization

Poly(n‐butyl methacrylate) (PBMA)‐b‐polystyrene (PSt) diblock copolymers were synthesized by emulsion atom transfer radical polymerization (ATRP). PBMA macroinitiators that contained alkyl bromide end groups were obtained by the emulsion ATRP of n‐butyl methacrylate with BrCH₃CHCOOC₂H₅ as the initiator; these were used to initiate the ATRP of styrene (St). The latter procedure was carried out at 85°C with CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine as the catalyst and polyoxyethylene(23) lauryl ether as the surfactant. With this technique, PBMA‐b‐PSt diblock copolymers were synthesized. The polymerization was nearly controlled; the ATRP of St from the macroinitiators showed linear increases in number‐average molecular weight with conversion. The block copolymers were characterized with IR spectroscopy, ¹H‐NMR, and differential scanning calorimetry. The effects of the molecular weight of the macroinitiators, macroinitiator concentration, catalyst concentration, surfactant concentration, and temperature on the polymerization were also investigated. Thermodynamic data and activation parameters for the ATRP are also reported. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 2123–2129, 2005     

Synthesis of poly(cyclohexene oxide)‐block‐polystyrene by combination of radical‐promoted cationic polymerization,atom transfer radical polymerization and click chemistry

The combination of radical‐promoted cationic polymerization, atom transfer radical polymerization (ATRP) and click chemistry was employed for the efficient preparation of poly(cyclohexene oxide)‐block‐polystyrene (PCHO‐b‐PSt). Alkyne end‐functionalized poly(cyclohexene oxide) (PCHO‐alkyne) was prepared by radical‐promoted cationic polymerization of cyclohexene oxide monomer in the presence of 1,2‐diphenyl‐2‐(2‐propynyloxy)‐1‐ethanone (B‐alkyne) and an onium salt, namely 1‐ethoxy‐2‐methylpyridinium hexafluorophosphate, as the initiating system. The B‐alkyne compound was synthesized using benzoin photoinitiator and propargyl bromide. Well‐defined bromine‐terminated polystyrene (PSt‐Br) was prepared by ATRP using 2‐oxo‐1,2‐diphenylethyl‐2‐bromopropanoate as initiator. Subsequently, the bromine chain end of PSt‐Br was converted to an azide group to obtain PSt‐N₃ by a simple nucleophilic substitution reaction. Then the coupling reaction between the azide end group in PSt‐N₃ and PCHO‐alkyne was performed with Cu(I) catalysis in order to obtain the PCHO‐b‐PSt block copolymer. The structures of all polymers were determined. Copyright © 2010 Society of Chemical Industry     

Synthesis of a chiral stationary phase with poly[styrene‐b‐cellulose 2,3‐bis(3,5‐dimethylphenylcarbamate)] by surface‐initiated atom transfer radical polymerization and its chiral resolution efficiency

A chiral stationary phase (CSP) with poly[styrene‐b‐cellulose 2,3‐bis(3,5‐dimethylphenylcarbamate)] was synthesized by the surface‐initiated atom transfer radical polymerization (SI‐ATRP) of cellulose 2,3‐bis(3,5‐dimethylphenylcarbamate)‐6‐acrylate after the SI‐ATRP of styrene on the surface of silicon dioxide supports in pyridine. The successful preparation of the CSP with poly[styrene‐b‐cellulose 2,3‐bis(3,5‐dimethylphenylcarbamate)] was confirmed via Fourier transform infrared spectroscopy, field emission scanning electron microscopy, X‐ray photoelectron spectroscopy, elemental analysis, and thermal analysis. The applicability for the chiral resolution of the CSP with poly[styrene‐b‐cellulose 2,3‐bis(3,5‐diphenylcarbamate)] was evaluated with high‐performance liquid chromatography with 10 racemates under various mobile phases of hexane/alcohol, hexane/tetrahydrofuran (THF), and hexane/chloroform. The results show that the CSP with poly[styrene‐b‐cellulose 2,3‐bis(3,5‐diphenylcarbamate)] could be used in THF and chloroform as eluents. The chiral resolutions of the commercial Chiracel OD, the CSP with cellulose 2,3‐bis(3,5‐dimethylphenylcarabmate), and the CSP with poly[styrene‐b‐cellulose 2,3‐bis(3,5‐dimethylphenylcarbamate)] prepared by SI‐ATRP were examined. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Reverse atom transfer radical polymerization of acrylonitrile under microwave irradiation

Reverse atom transfer radical polymerization was first used to successfully synthesize polyacrylonitrile under microwave irradiation. FeCl₃, coordinated by isophthalic acid, was used as the catalyst, and 2,2′‐azobisisoheptonitrilewas used as the initiator. N,N‐Dimethylformamide was used as the solvent to improve the solubility of the ligand. Under the same experimental conditions, the apparent rate constant under microwave irradiation was higher than that under conventional heating. The polymerization not only showed the best control of the molecular weight and its distribution but also provided a rather rapid reaction rate with the [acrylonitrile]/[2,2′‐azobisisoheptonitrile]/[FeCl₃]/[isophthalic acid] ratio of 300 : 1 : 1 : 2. The polymers obtained were used as macroinitiators to initiate the chain extension and successfully synthesize acrylonitrile polymers with a molecular weight higher than 50,000 and a narrow polydispersity as low as 1.30. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Effect of ferrocene moieties on the copper‐based atom transfer radical polymerization of methyl methacrylate

The atom transfer radical polymerization (ATRP) of methyl methacrylate catalyzed by copper–tripodal complexes with ferrocene moieties (CuX/TRENFcImine, where X is Br or Cl, and TRENFcImine is tris‐[2‐(ferrocenylmethyleneimino)ethyl]amine) was investigated to understand the effect of redox active moieties on the performance of ATRP catalysts. The CuBr/TRENFcImine system was highly active, with 82% conversion in 2 h. However, the polymerization became slower at higher molar ratios of monomer to catalyst. The polydispersity index was broad, and the initiation efficiency was relatively low. On the basis of the conformational analysis, the highly active and less controlled polymerization was probably caused by the electronic effect rather than the steric effect on the ferrocene moieties, which led to the higher and lower values in the activation and deactivation steps, respectively. The polydispersity index was improved by the addition of CuBr₂, but this led to slower rates of polymerization. The effect of halide groups on ATRP caused a faster rate in the CuBr/TRENFcImine polymerization system than in the CuCl/TRENFcImine system. The higher molar ratio of monomer to catalyst had no significant effect on the CuCl/TRENFcImine system. Nonetheless, the trace of water in the CuCl₂·2H₂O system accelerated the rate of propagation, which led to a higher molecular weight. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Reverse atom transfer radical polymerization of methyl methacrylate in different solvents

The reverse atom transfer radical polymerization of methyl methacrylate was investigated in different solvents: xylene, N,N‐dimethylformamide, and pyridine. The polymerizations were uncontrolled, using 2,2′‐bipyridine as a ligand in xylene and pyridine because the catalyst (CuBr₂/2,2′‐bipyridine complex) had poor solubility in the xylene system. In the pyridine system, the solubility of the catalyst increased, but the solvent could complex with CuBr₂, which influenced the control of the polymerization. In the N,N‐dimethylformamide system, the catalyst could be dissolved in the solvent completely, but the ? N(CH₃)₂ group in N,N‐dimethylformamide could also complex with CuBr₂, so the polymerization could not be well controlled. The ligand of 4,4′‐di(5‐nonyl)‐2,2′‐bipyridine was also investigated in xylene; the introduction of the ? CH(C₄H₉)₂ group enabled the CuBr₂/4,4′‐di(5‐nonyl)‐2,2′‐bipyridine complex to easily dissolve in xylene, and the polymerizations were well controlled. The number‐average molecular weight increased linearly with the monomer conversion from 4280 to 14,700. During the whole polymerization, the polydispersities were quite low (1.07–1.10). © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007