Study of Configuration Differentia and Highly Efficient,Deep‐Blue,Organic Light‐Emitting Diodes Based on Novel Naphtho[1,2‐d]imidazole Derivatives

Two novel naphtho[1,2‐d]imidazole derivatives are developed as deep‐blue, light‐emitting materials for organic light‐emitting diodes (OLEDs). The 1H‐naphtho[1,2‐d]imidazole based compounds exhibit a significantly superior performance than the 3H‐naphtho[1,2‐d]imidazole analogues in the single‐layer devices. This is because they have a much higher capacity for direct electron‐injection from the cathode compared to their isomeric counterparts resulting in a ground‐breaking EQE (external quantum efficiency) of 4.37% and a low turn‐on voltage of 2.7 V, and this is hitherto the best performance for a non‐doped single‐layer fluorescent OLED. Multi‐layer devices consisting of both hole‐ and electron‐transporting layers, result in identically excellent performances with EQE values of 4.12–6.08% and deep‐blue light emission (Commission Internationale de l'Eclairage (CIE) y values of 0.077–0.115) is obtained for both isomers due to the improved carrier injection and confinement within the emissive layer. In addition, they showed a significantly better blue‐color purity than analogous molecules based on benzimidazole or phenanthro[9,10‐d]imidazole segments.     

High‐Efficiency Deep‐Blue Light‐Emitting Diodes Based on Phenylquinoline/Carbazole‐Based Compounds

Highly efficient deep‐blue fluorescent materials based on phenylquinoline–carbazole derivatives (PhQ‐CVz, MeO‐PhQ‐CVz, and CN‐PhQ‐CVz) are synthesized for organic light‐emitting diodes (OLEDs). The materials form high‐quality amorphous thin films by thermal evaporation and the energy levels can be easily adjusted by the introduction of different electron‐donating and electron‐withdrawing groups on carbazoylphenylquinoline. Non‐doped deep‐blue OLEDs that use PhQ‐CVz as the emitter show bright emission (Commission Internationale de L'Éclairage (CIE) coordinates, x = 0.156, y = 0.093) with an external quantum efficiency of 2.45%. Furthermore, the material works as an excellent host material for 4,4′‐bis(9‐ethyl‐3‐carbazovinylene)‐1,1′‐biphenyl dopant to get high‐performance OLEDs with excellent deep‐blue CIE coordinates (x = 0.155, y = 0.157), high power efficiency (5.98 lm W^?1), and high external quantum efficiency (5.22%).     

Highly Efficient Non‐Doped Blue Organic Light‐Emitting Diodes Based on Fluorene Derivatives with High Thermal Stability

A new series of blue‐light‐emitting fluorene derivatives have been synthesized and characterized. The fluorene derivatives have high fluorescence yields, good thermal stability, and high glass‐transition temperatures in the range 145–193 °C. Organic light‐emitting diodes (OLEDs) fabricated using the fluorene derivatives as the host emitter show high efficiency (up to 5.3 cd A^–1 and 3.0 lm W^–1) and bright blue‐light emission (Commission Internationale de L'Eclairage (CIE) coordinates of x = 0.16, y = 0.22). The performance of the non‐doped fluorene‐based devices is among the best fluorescent blue‐light‐emitting OLEDs. The good performance of the present blue OLEDs is considered to derive from: 1) appropriate energy levels of the fluorene derivatives for good carrier injection; 2) good carrier‐transporting properties; and 3) high fluorescence efficiency of the fluorene derivatives. These merits are discussed in terms of the molecular structures.     

New Solution‐Processable Electron Transport Materials for Highly Efficient Blue Phosphorescent OLEDs

Several new solution‐processable organic semiconductors based on dendritic oligoquinolines were synthesized and were used as electron‐transport and hole‐blocking materials to realize highly efficient blue phosphorescent organic light‐emitting diodes (PhOLEDs). Various substitutions on the quinoline rings while keeping the central meta‐linked tris(quinolin‐2‐yl)benzene gave electron transport materials that combined wide energy gap (>3.3 eV), moderate electron affinity (2.55‐2.8 eV), and deep HOMO energy level (<‐6.08 eV) with electron mobility as high as 3.3 × 10^?3 cm² V^?1 s^?1. Polymer‐based PhOLEDs with iridium (III) bis(4,6‐(di‐fluorophenyl)pyridinato‐N,C^2′)picolinate (FIrpic) blue triplet emitter and solution‐processed oligoquinolines as the electron‐transport layers (ETLs) gave luminous efficiency of 30.5 cd A^?1 at a brightness of 4130 cd m^?2 with an external quantum efficiency (EQE) of 16.0%. Blue PhOLEDs incorporating solution‐deposited ETLs were over two‐fold more efficient than those containing vacuum‐deposited ETLs. Atomic force microscopy imaging shows that the solution‐deposited oligoquinoline ETLs formed vertically oriented nanopillars and rough surfaces that enable good ETL/cathode contacts, eliminating the need for cathode interfacial materials (LiF, CsF). These solution‐processed blue PhOLEDs have the highest performance observed to date in polymer‐based blue PhOLEDs.     

Electron‐Enhanced Hole Injection in Blue Polyfluorene‐Based Polymer Light‐Emitting Diodes

It has recently been reported that, after electrical conditioning, an ohmic hole contact is formed in poly(9,9‐dioctylfluorene) (PFO)‐based polymer light‐emitting diodes (PLED), despite the large hole‐injection barrier obtained with a poly(styrene sulfonic acid)‐doped poly(3,4‐ethylenedioxythiophene) (PEDOT:PSS) anode. We demonstrate that the initial current at low voltages in a PEDOT:PSS/PFO‐based PLED is electron dominated. The voltage at which the hole injection is enhanced strongly depends on the electron‐transport properties of the device, which can be modified by the replacement of reactive end groups by monomers in the synthesis. Our measurements reveal that the switching voltage of the PLED is governed by the electron concentration at the PEDOT:PSS/PFO contact. The switching effect in PFO is only observed for a PEDOT:PSS hole contact and not for other anodes such as indium tin oxide or Ag.     

Monothiatruxene‐Based,Solution‐Processed Green,Sky‐Blue,and Deep‐Blue Organic Light‐Emitting Diodes with Efficiencies Beyond 5% Limit

The development of blue materials with good efficiency, even at high brightness, with excellent color purity, simple processing, and high thermal stability assuring adequate device lifetime is an important remaining challenge for organic light‐emitting didoes (OLEDs) in displays and lightning applications. Furthermore, these various features are typically mutually exclusive in practice. Herein, four novel green and blue light‐emitting materials based on a monothiatruxene core are reported together with their photophysical and thermal properties, and performance in solution‐processed OLEDs. The materials show excellent thermal properties with high glass transition temperatures ranging from 171 to 336 °C and decomposition temperatures from 352 to 442 °C. High external quantum efficiencies of 3.7% for a deep‐blue emitter with CIE color co‐ordinates (0.16, 0.09) and 7% for green emitter with color co‐ordinates (0.22, 0.40) are achieved at 100 cd m^?2. The efficiencies observed are exceptionally high for fluorescent materials with photoluminescence quantum yields of 24% and 62%, respectively. The performance at higher brightness is very good with only 38% and 17% efficiency roll‐offs at 1000 cd m^?2. The results indicate that utilization of this unique molecular design is promising for efficient deep‐blue highly stable and soluble light‐emitting materials.     

Similar or Totally Different: The Control of Conjugation Degree through Minor Structural Modifications,and Deep‐Blue Aggregation‐Induced Emission Luminogens for Non‐Doped OLEDs

Four 4,4′‐bis(1,2,2‐triphenylvinyl)biphenyl (BTPE) derivatives, 4,4′‐bis(1,2,2‐triphenylvinyl)biphenyl, 2,3′‐bis(1,2,2‐triphenylvinyl)biphenyl, 2,4′‐bis(1,2,2‐triphenylvinyl)biphenyl, 3,3′‐bis(1,2,2‐triphenylvinyl)biphenyl and 3,4′‐bis(1,2,2‐triphenylvinyl)biphenyl (oTPE‐mTPE, oTPE‐pTPE, mTPE‐mTPE, and mTPE‐pTPE, respectively), are successfully synthesized and their thermal, optical, and electronic properties fully investigated. By merging two simple tetraphenylethene (TPE) units together through different linking positions, the π‐conjugation length is effectively controlled to ensure the deep‐blue emission. Because of the minor but intelligent structural modification, all the four fluorophores exhibit deep‐blue emissions from 435 to 459 nm with Commission Internationale de l'Eclairage (CIE) chromaticity coordinates of, respectively, (0.16, 0.14), (0.15, 0.11), (0.16, 0.14), and (0.16, 0.16), when fabricated as emitters in organic light‐emitting diodes (OLEDs). This is completely different from BTPE with sky‐blue emission (0.20, 0.36). Thus, these results may provide a novel and versatile approach for the design of deep‐blue aggregation‐induced emission (AIE) luminogens.     

A Molecular Glass for Deep‐Blue Organic Light‐Emitting Diodes Comprising a 9,9′‐Spirobifluorene Core and Peripheral Carbazole Groups

Novel fluorene‐based compounds, TCPC‐6 and TCPC‐4, with rigid central spirobifluorene cores and peripheral carbazole groups are synthesized using the Suzuki coupling reaction. The optical, electrochemical, and thermal properties of these compounds are characterized. The compounds show strong deep‐blue emission both in solution and as thin films. Both TCPC‐6 and TCPC‐4 exhibit amorphous morphologies in the solid state with high glass transition temperatures (T_g) of 108 and 143 °C, respectively. Atomic force microscopy (AFM) measurements indicate that high‐quality amorphous films of these novel compounds can be prepared by spin‐coating. The oxidation potentials of TCPC‐6 and TCPC‐4 are significant lower than that of model compounds without peripheral carbazole groups, which suggests that these compounds have relatively high highest occupied molecular orbital (HOMO) energy levels and better hole‐injection capabilities. Light‐emitting devices fabricated by spin‐coating films of these molecules exhibit deep‐blue emission with Commission Internationale de l'Eclairage (CIE) chromaticity coordinates (x, y) of (0.16, 0.05); the devices fabricated using spin‐coated TCPC‐6 and TCPC‐4 layers exhibit high luminance efficiencies of 1.35 and 0.90 cd A^–1 (with external quantum efficiencies of 3.72 and 2.47 %), respectively.     

Deep‐Blue Phosphorescent Ir(III) Complexes with Light‐Harvesting Functional Moieties for Efficient Blue and White PhOLEDs in Solution‐Process

The photoluminescence (PL) efficiency of emitters is a key parameter to accomplish high electroluminescent performance in phosphorescent organic light‐emitting diodes (PhOLEDs). With the aim of enhancing the PL efficiency, this study designs deep‐blue emitting heteroleptic Ir(III) complexes (tBuCN‐FIrpic, tBuCN‐FIrpic‐OXD, and tBuCN‐FIrpic‐mCP) for solution‐processed PhOLEDs by covalently attaching the light‐harvesting functional moieties (mCP‐Me or OXD‐Me) to the control Ir(III) complex, tBuCN‐FIrpic. These Ir(III) complexes show similar deep‐blue emission peaks around 453, 480 nm (298 K) and 447, 477 nm (77 K) in chloroform. tBuCN‐FIrpic‐mCP demonstrates higher light‐harvesting efficiency (142%) than tBuCN‐FIrpic‐OXD (112%), relative to that of tBuCN‐FIrpic (100%), due to an efficient intramolecular energy transfer from the mCP group to the Ir(III) complex. Accordingly, the monochromatic PhOLEDs of tBuCN‐FIrpic‐mCP show higher external quantum efficiency (EQE) of 18.2% with one of the best blue coordinates (0.14, 0.18) in solution‐processing technology. Additionally, the two‐component (deep‐blue:yellow‐orange), single emitting layer, white PhOLED of tBuCN‐FIrpic‐mCP shows a maximum EQE of 20.6% and superior color quality (color rendering index (CRI) = 78, Commission Internationale de L'Eclairage (CIE) coordinates of (0.353, 0.352)) compared with the control device containing sky‐blue:yellow‐orange emitters (CRI = 60, CIE coordinates of (0.293, 0.395)) due to the good spectral coverage by the deep‐blue emitter.     

Efficient Deep‐Blue Organic Light‐Emitting Diodes: Arylamine‐Substituted Oligofluorenes

Novel deep‐blue‐light‐emitting diphenylamino and triphenylamino end‐capped oligofluorenes were synthesized by double palladium‐catalyzed Suzuki cross‐coupling of dibromo‐oligofluorene with the corresponding boronic acid as a key step. These oligofluorenes exhibit deep‐blue emission (λ^em_max = 429–432 nm), low and reversible electrochemical oxidation (highest occupied molecular orbital = 5.15–5.20 eV), high fluorescence quantum yield (Φ_FL = 0.61–0.93), and good thermal properties (glass‐transition temperature, T_g = 99–195 °C and decomposition temperature, T_dec > 450 °C). Remarkably, saturated deep‐blue organic light‐emitting diodes, made from these oligofluorenes as dopant emitters, have been achieved with excellent performance and maximum efficiencies up to 2.9 cd A^–1 at 2 mA cm^–2 (external quantum efficiency of 4.1 %) and with Commission Internationale de l'Éclairage (x,y) coordinates of (0.152,0.08), which is very close to the National Television System Committee standard blue.     

Tetradentate Platinum Complexes for Efficient and Stable Excimer‐Based White OLEDs

A series of tetradentate platinum complexes that exhibit both efficient monomer and excimer emission are synthesized. Via small modifications to the cyclometalating ligands, both the monomer and excimer emission energy can be separately tuned. Devices employing all of the developed emitters demonstrate impressively high external quantum efficiencies (EQEs) within the range of 22% to 27% for concentrations between 2% and 16%. The halogen‐free design of the complexes also enables the fabrication of single, doped, white organic light‐emitting diodes (OLEDs) with long operational lifetimes. A balanced white device employing the complex Pt2O2, achieves a device operational lifetime to 80% of the initial luminance estimated at over 200 h at 1000 cd m^–2, while also achieving 12.5% peak EQE for a warm white light with a color rendering index of 80. Furthermore, a highly doped device exhibiting nearly exclusive excimer emission showed an impressive operational lifetime, which is estimated at more than 400 h for 1000 cd m^‐2.     

Monodisperse Starburst Oligofluorene‐Functionalized 4,4′,4″‐Tris(carbazol‐9‐yl)‐triphenylamines: Their Synthesis and Deep‐Blue Fluorescent Properties for Organic Light‐Emitting Diode Applications

Four monodisperse starburst oligomers bearing a 4,4′,4″‐tris(carbazol‐9‐yl)‐triphenylamine (TCTA) core and six oligofluorene arms are synthesized and characterized. The lengths of oligofluorene arms vary from one to four fluorene units, giving the starburst oligomers molecular weights ranging from 3072 to 10 068 Da (1 Da = 1.66 × 10^–27 kg). All of the starburst oligomers have good film‐forming capabilities, and display bright, deep‐blue fluorescence (λ_max = 395–416 nm) both in solution and in the solid state, with the quantum efficiencies of the films (Φ_PL) varying between 27 and 88 %. Electrochemical studies demonstrate that these materials have large energy gaps, and are stable for both p‐doping and n‐doping processes. Electroluminescent devices are successfully fabricated using these materials as hole‐transporting emitters, and emit deep‐blue light. Devices with luminance values up to 1025 cd m^–2 at 11 V and luminous efficiencies of 0.47 cd A^–1 at 100 cd m^–2 have been produced, which translates to an external quantum efficiency of 1.4 %. In addition, these large‐energy‐gap starburst oligomers are good host materials for red electrophosphorescence. The luminance of the red electrophosphorescent devices is as high as 4452 cd m^–2, with a luminous efficiency of 4.31 cd A^–1 at 15 mA cm^–2: This value is much higher than those obtained from the commonly used hole‐transporting materials, such as poly(vinyl carbazole) (PVK) (1.10 cd A^–1 at 16 mA cm^–2).     

Rational Molecular Design for Deep‐Blue Thermally Activated Delayed Fluorescence Emitters

By simple modification of the functional groups on the donor unit, the thermally activated delayed fluorescence (TADF) properties of emitters can easily be manipulated. A series of deep blue to blue emissive TADF derivatives is developed, capable of deep‐blue emissions from 403 to 460 nm in toluene. Deep‐blue organic light‐emitting diodes (OLEDs) based on this series of TADF emitters are fabricated, resulting in an electroluminescence peak at 428 nm and a high external quantum efficiency of up to 10.3%. One deep‐blue OLED has achieved the commission internationale de l'eclairage (CIE) coordinates of (0.156, 0.063), which is among the best reported TADF performances for deep‐blue OLEDs with CIE_y < 0.07.     

Synthesis and Characterization of n‐Type Materials for Non‐Doped Organic Red‐Light‐Emitting Diodes

Two compounds, 2,3‐dicyano‐5,6‐di(4′‐diphenylamino‐biphenyl‐4‐yl)pyrazine (CAPP) and 6,7‐dicyano‐2,3‐di(4′‐diphenylamino‐biphenyl‐4‐yl)quinoxaline (CAPQ), capable of intramolecular charge transfer, have been designed and synthesized in high yield by a convenient procedure. The compounds have been fully characterized spectroscopically. They have a high thermal stability and show bright light emission both in non‐polar solvents and in the solid state. Moreover, they exhibit excellent reversible oxidation and reduction waves. The higher energy level of the highest occupied molecular orbital (–5.3 eV) and the triphenylamine group are advantageous for hole‐injection/transport. In addition, the high electron affinities of 3.4 eV and the observed reversible reductive process suggest that these compounds enhance electron injection and have potential for use in electron transport. Three types of non‐doped red‐light‐emitting diodes have been studied using CAPP and CAPQ as the electron‐transporting and host‐light‐emitting layers, respectively. The devices exhibit red electroluminescence (EL), and constant Commission Internationale de l'Eclairage coordinates have been observed on increasing the current density. Pure red EL of CAPP, with a maximum brightness of 536 cd m^–2 and an external quantum efficiency of 0.7 % in ambient air, was achieved.     

A Pyridine‐Containing Anthracene Derivative with High Electron and Hole Mobilities for Highly Efficient and Stable Fluorescent Organic Light‐Emitting Diodes

A pyridine‐containing anthracene derivative, 9,10‐bis(3‐(pyridin‐3‐yl)phenyl)anthracene (DPyPA), which comprehensively outperforms the widely used electron‐transport material (ETM), tris(8‐quinolinolato) aluminum (Alq₃), is synthesized. DPyPA exhibits ambipolar transport properties, with both electron and hole mobilities of around 10^?3 cm^?2 V^?1 s^?1; about two orders of magnitude higher than that of Alq₃. The nitrogen atom in the pyridine ring of DPyPA coordinates to lithium cations, which leads to efficient electron injection when LiF/Al is used as the cathode. Electrochemical measurements demonstrate that both the cations and anions of DPyPA are stable, which may improve the stability of devices based on DPyPA. Red‐emitting, green‐emitting, and blue‐emitting fluorescent organic light emitting diodes with DPyPA as the ETM display lower turn‐on voltages, higher efficiencies, and stronger luminance than the devices with Alq₃ as the ETM. The power efficiencies of the devices based on DPyPA are greater by 80–140% relative to those of the Alq₃‐based devices. The improved performance of these devices is attributed to the increased carrier balance. In addition, the device employing DPyPA as the ETM possesses excellent stability: the half‐life of the DPyPA‐based device is 67 000 h—seven times longer than that of the Alq₃‐based device—for an initial luminance of 5000 cd m^?2.     

Molecular Engineering of Blue Fluorescent Molecules Based on Silicon End‐Capped Diphenylaminofluorene Derivatives for Efficient Organic Light‐Emitting Materials

Blue fluorescent materials based on silicone end‐capped 2‐diphenylaminofluorene derivatives are synthesized and characterized. These materials are doped into a 2‐methyl‐9,10‐di‐[2‐naphthyl]anthracene host as blue dopant materials in the emitting layer of organic light‐emitting diode devices bearing a structure of ITO/DNTPD (60 nm)/NPB (30 nm)/emitting layer (30 nm)/Alq₃ (20 nm)/LiF (1.0 nm)/Al (200 nm). All devices exhibit highly efficient blue electroluminescence with high external quantum efficiencies (3.47%–7.34% at 20 mA cm^?2). The best luminous efficiency of 11.2 cd A^?1 and highest quantum efficiency of 7.34% at 20 mA cm^?2 are obtained in a device with CIE coordinates (0.15, 0.25). A deep‐blue OLED with CIE coordinates (0.15, 0.14) exhibits a luminous efficiency of 3.70 cd A^?1 and quantum efficiency of 3.47% at 20 mA cm^?2.     

Effect of Hole Mobility Through Emissive Layer on Temporal Stability of Blue Organic Light‐Emitting Diodes

Light‐emitting conjugated oligomers comprising anthracene, naphthalene, and fluorene units have been synthesized to investigate three configurations of blue organic light‐emitting diodes (OLEDs) that are designed to identify the origins of device instability. The transient OLED technique is employed to measure hole mobilities, which are found to be 3.1 × 10^–4, 8.9 × 10^–5, and 3.6 × 10^–5 cm² V^–1 s^–1 for three different blue‐light‐emitting model compounds with varying fluorene content. A higher hole mobility through the emissive layer results in a wider recombination zone, which, in turn, is responsible for a longer device lifetime and a lower drive voltage at the expense of luminance yield.     

Synthesis,Structure, Electronic State,and Luminescent Properties of Novel Blue‐Light‐Emitting Aryl‐Substituted 9,9‐Di(4‐(di‐p‐tolyl)aminophenyl)fluorenes

Novel blue‐light‐emitting fluorene derivatives 5a–c and 7a–c containing bulky and highly emissive groups, namely pyrene, 10‐phenylanthracene‐9‐yl and 10‐(4′‐diphenylaminophenyl)anthracene‐9‐yl groups, as well as hole‐injecting/transporting triarylamines were synthesized. Single crystals of compounds 5a , 5c , 7a , and 7c were grown and their crystal structures were determined by X‐ray diffraction. The four fluorene derivatives have nonplanar molecular structures, which reduce the intermolecular interaction and the likelihood of molecular aggregation or excimer formation. No unwanted long‐wavelength emission was observed in the photoluminescence (PL) spectra of the 5a–c and 7a–c thin films. Their PL spectra reveal excellent thermal stability after annealing treatment under air and ambient light. All of the six compounds show high fluorescence quantum yields and outstanding thermal stabilities. The 2‐aryl and 2,7‐diaryl substituents at the fluorene molecule have a significant effect on the photophysical properties and the thermal characteristics. The six compounds show almost the same energy levels for the highest occupied molecular orbitals (HOMOs) of about ?5.20 eV, which allows effective hole injection. The C2‐ and C7‐aryl substituents play a relatively less‐important role in the HOMO energy levels, which depend mainly on the triphenylamino groups at the C9 position. The molecular orbitals, excitation energy, and emission energy were calculated to explain the real origin of their photophysical characteristics. The HOMOs are mainly localized on the triphenylamino groups at the C9 position, while the lowest unoccupied molecular orbitals (LUMOs) have a significant orbital density at the C2‐ and/or C7‐aryl substituents. Pure‐blue‐light‐emitting diodes based on 2,7‐diaryl‐9,9‐di(triarylamino)fluorenes were fabricated.     

Versatile,Benzimidazole/Amine‐Based Ambipolar Compounds for Electroluminescent Applications: Single‐Layer,Blue, Fluorescent OLEDs,Hosts for Single‐Layer,Phosphorescent OLEDs

A series of compounds containing arylamine and 1,2‐diphenyl‐1H‐benz[d]imidazole moieties are developed as ambipolar, blue‐emitting materials with tunable blue‐emitting wavelengths, tunable ambipolar carrier‐transport properties and tunable triplet energy gaps. These compounds possess several novel properties: (1) they emit in the blue region with high quantum yields; (2) they have high morphological stability and thermal stability; (3) they are capable of ambipolar carrier transport; (4) they possess tunable triplet energy gaps, suitable as hosts for yellow‐orange to green phosphors. The electron and hole mobilities of these compounds lie in the range of 0.68–144 × 10^?6 and 0.34–147 × 10^?6 cm² V^?1 s^?1, respectively. High‐performance, single‐layer, blue‐emitting, fluorescent organic light‐emitting diodes (OLEDs) are achieved with these ambipolar materials. High‐performance, single‐layer, phosphorescent OLEDs with yellow‐orange to green emission are also been demonstrated using these ambipolar materials, which have different triplet energy gaps as the host for yellow‐orange‐emitting to green‐emitting iridium complexes. When these ambipolar, blue‐emitting materials are lightly doped with a yellow‐orange‐emitting iridium complex, white organic light‐emitting diodes (WOLEDs) can be achieved, as well by the use of the incomplete energy transfer between the host and the dopant.     

Hole Injection in a Model Fluorene–Triarylamine Copolymer

Recent developments in synthesis and purification have yielded conjugated polymers with hole mobilities exceeding 0.01 cm² V^?1 s^?1. Essential to harvesting the potential of these materials in organic light emitting diodes (OLEDs) is the identification of suitable ohmic contacts. Using a model fluorene copolymer that shows high‐mobility, non‐dispersive hole transport, it is demonstrated that electrodes commonly used as anodes in OLEDs are very poor hole injectors. Injection from Au and indium tin oxide anodes is limited by energy barriers of 0.75 and 0.65 eV, respectively, and the injected current is found to be temperature independent—a prediction that was not reproduced by the leading injection model for disordered organic semiconductors. Injection from a poly(3,4‐ethylenedioxythiophene) doped with poly(styrenesulfonate) (PEDOT:PSS) anode, on the other hand, is found to become less efficient with electric field, a behavior which is currently not understood. In thinner poly[(9,9′‐dioctylfluorenyl‐2,7‐diyl)‐co‐(4,4′‐(N‐(4‐sec‐butyl))diphenylamine)] films, which are of relevance to OLEDs, ohmic losses on the PEDOT:PSS layer are found to limit the flow of current. These results illustrate the opportunity to further improve the performance of OLEDs as well as the challenge posed by high mobility conjugated polymers for the design of hole injection layers.