A new photocrosslinkable hydrogel based on a derivative of polyaspartic acid for the controlled release of ketoprofen

A novel photocrosslinkable and pH-sensitive hydrogel used for drug delivery was developed based on polyaspartic acid. Polysuccinimide (PSI) was modified by hydrazine and acryloyl chloride. The unreacted imide rings of PSI were hydrolyzed. Hydrogels were formed by photocrosslinking without any crosslinker or photoinitiator. Products were characterized by FT-IR and solid-state ¹³CNMR analysis. The swelling behaviors of hydrogel in various pH values were studied. Ketoprofen (KP) was chosen as a model drug. Two drug loading methods were compared. The release kinetics of KP was evaluated in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF) at 37 °C. The results showed that drug-loaded hydrogels were resistant to SGF, and hence they could be useful for oral drug delivery. There would be a wide range of applications for controlled drug delivering system.     

Synthesis and evaluation of sucrose‐containing polymeric hydrogels for oral drug delivery

Biodegradable and biocompatible copolymeric hydrogels based on sucrose acrylate, N‐vinyl‐2‐pyrrolidinone, and acrylic acid were designed and synthesized. Because of the growing importance of sugar‐based hydrogels as drug delivery systems, these new pH‐responsive sucrose‐containing copolymeric hydrogels were investigated for oral drug delivery. The sucrose acrylate monomer was synthesized and characterized. The copolymeric hydrogel was synthesized by free‐radical polymerization. Azobisisobutyronitrile (AIBN) was the free‐radical initiator employed and bismethyleneacrylamide (BIS) was the crosslinking agent used for hydrogel preparations. Homopolymeric vinyl pyrrolidone hydrogels were also prepared by the same technique. The hydrogels were characterized by differential scanning calorimetry, thermogravimetric analysis, and scanning electron microscopy. Equilibrium swelling studies were carried out in enzyme‐free simulated gastric and intestinal fluids (SGF and SIF, respectively). These results indicate the pH‐responsive nature of the hydrogels. The gels swelled more in SIF than in SGF. A model drug, propranolol hydrochloride (PPH), was entrapped in these gels and the in vitro release profiles were established separately in both enzyme‐free SGF and enzyme‐free SIF. The drug release was found to be faster in SIF. About 93 and 99% of the entrapped drug was released over a period of 24 h in SGF and SIF, respectively. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2597–2604, 2002     

In vitro evaluation of spray‐dried chitosan microspheres crosslinked with pyromellitic dianhydride for oral colon‐specific delivery of protein drugs

Chitosan microspheres have been prepared using a spray‐drying method, and crosslinked with pyromellitic dianhydride. The chemical structure of the modified chitosan was characterized by FTIR spectroscopy and solid state 13C NMR analysis. The particle size and morphology of the crosslinked chitosan were investigated. These microspheres were evaluated for colon‐specific delivery of bovine serum albumin (BSA) as a model protein drug. The results indicate that the drug was released as follows: 37.1 ± 2.8% after 2 h in SGF, 73.1 ± 4.8% after 8 h (2 h in SGF+ 6 h in SIF), and 80.9 ± 4.1% after 12 h in SCF. The effect of β‐glucosidase on the drug release was also examined. The encapsulation efficiency was decreased from 88.4 ± 3.1% to 62.8 ± 2.9%, with increasing BSA concentration. Loading capacity was significantly increased from 6.3 ± 0.3% to 41.8 ± 4.1% by increasing the initial BSA concentration. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40514.     

Synthesis and characterization of novel pH-, ionic strength and temperature- sensitive hydrogel for insulin delivery

A series of novel silane crosslinked hydrogel was prepared from kappa carrageenan (KC), acrylic acid (AA) using vinyltriethoxysilane (VTESi). Potassium persulphate initiated the grafting and copolymerization reactions between reactants. In addition, the condensation of the hydroxyl groups of KC and VTESi resulted into crosslinking. Novelty of this work is the use of VTESi as crosslinker for such a composition of hydrogel. The structure of prepared hydrogels was characterized by Fourier transform infrared spectroscopy. The analysis of spectra confirmed the presence of feed components in the prepared hydrogels. Thermogravimetric analysis showed an increase in the stability of the hydrogels either having high AA contents or crosslinker amount. The effect of feed components, pH (buffer, non-buffer), electrolytic media and temperature on the swelling behaviour of the hydrogels is reported here.Most promising results with high swelling ratio were observed in hydrogel having low monomeric ratio (KC:AA = 1:7). pH response of this hydrogel in acidic and neutral pH makes it suitable for drug delivery application. Insulin, a protein based drug was selected as a model drug. It requires its delivery in small intestine for proper action; therefore its release behaviour was studied in-vitro in simulated stomach and intestinal fluids. The release profile of insulin showed negligible release in simulated gastric fluid (SGF) and sustained release in simulated intestinal fluid (SIF). The obtained results are in good agreement with the swelling response of this hydrogel. The weak structure of this hydrogel makes it preferable for drug delivery, as it is able to get crumbled after releasing the drug for 6 h at neutral pH.     

Calcium‐carboxymethyl chitosan hydrogel beads for protein drug delivery system

In this study, carboxymethyl chitosan (CMC) hydrogel beads were prepared by crosslinking with Ca²⁺. The pH‐sensitive characteristics of the beads were investigated by simulating gastrointestinal pH conditions. As a potential protein drug delivery system, the beads were loaded with a model protein (bovine serum albumin, BSA). To improve the entrapment efficiency of BSA, the beads were further coated with a chitosan/CMC polyelectrolyte complex (PEC) membrane by extruding a CMC/BSA solution into a CaCl₂/chitosan gelation medium. Finally, the release studies of BSA‐loaded beads were conducted. We found that, the maximum swelling ratios of the beads at pH 7.4 (17–21) were much higher than those at pH 1.2 (2–2.5). Higher entrapment efficiency (73.2%) was achieved in the chitosan‐coated calcium‐CMC beads, compared with that (44.4%) in the bare calcium‐CMC beads. The PEC membrane limited the BSA release, while the final disintegration of beads at pH 7.4 still leaded to a full BSA release. Therefore, the chitosan‐coated calcium‐CMC hydrogel beads with higher entrapment efficiency and proper protein release properties were a promising protein drug carrier for the site‐specific release in the intestine. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3164–3168, 2007     

Preparation and Swelling Study of a pH-Dependent Interpolymeric Hydrogel Based on Chitosan for Controlled Drug Release

Novel pH-dependent, biodegradable interpolymeric network (IPN) hydrogels were prepared for controlled drug release investigations. The IPN hydrogels were prepared by irradiation of solutions of N-acryloyglycine (NAGly), polyethylene glycol diacrylate (PEGDA) mixed with chitosan, in the presence of a lower amount of glutaraldehyde as the crosslinker and using 2,2-dimethoxy-2-phenyl acetophenone as the photo-initiator. The equilibrium swelling studies were carried out for the gels at 37°C in buffer solutions of pH 2.1 and 7.4 (simulated gastric and intestinal fluids, respectively). 5-Fluorouracil (5-FU) was entrapped, as a model therapeutic agent, in the hydrogels and equilibrium-swelling studies were carried out for the drug-entrapped gels at 37°C. The in-vitro release profiles of the drug were established at 37°C in pH 2.1 and 7.4.     

Hollow,pH‐sensitive calcium–alginate/poly(acrylic acid) hydrogel beads as drug carriers for vancomycin release

In this study, hollow calcium–alginate/poly(acrylic acid) (PAA) hydrogel beads were prepared by UV polymerization for use as drug carriers. The hollow structure of the beads was fortified by the incorporation of PAA. The beads exhibited different swelling ratios when immersed in media at different pH values; this demonstrated that the prepared hydrogel beads were pH sensitive. A small amount (<9%) of vancomycin that had been incorporated into the beads was released in simulated gastric fluid, whereas a large amount (≤67%) was released in a sustained manner in simulated intestinal fluid. The observed drug‐release profiles demonstrated that the prepared hydrogel beads are ideal candidate carriers for vancomycin delivery into the gastrointestinal tract. Furthermore, the biological response of cells to these hydrogel beads indicated that they exhibited good biological safety and may have additional applications in tissue engineering. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation of novel pH‐sensitive nanocomposites based on ionic‐liquid modified montmorillonite for colon specific drug delivery system

An ionic liquid monomer, 3‐methyl‐1‐[2‐(2‐methyl‐acryloxy)‐ethyl]‐imidazolium chloride, was synthesized through the quaternization of N‐methylimidazole and 2‐chloroethyl methacrylate. This ionic liquid monomer intercalated into the montmorillonite layers and subsequently copolymerized with methacrylic acid. The organic–inorganic composite was characterized by FTIR, XRD, SEM, and EDX to study their structure and properties. Naproxen as a model drug was entrapped in these pH‐sensitive positively charged nano carriers and the in vitro release profiles were established separately in both enzyme‐free simulated gastric and intestinal fluids (SGF, pH 1) and (SIF, pH 7.4) respectively. It was observed that the drug release percentages in SIF were higher; hence the prepared nanocomposite could be considered as a suitable carrier for colon specific drug delivery. POLYM. COMPOS., 182–187, 2016. © 2014 Society of Plastics Engineers     

Thermoresponsive/low‐fouling Zwitterionic hydrogel for controlled drug release

A controlled/ living free‐radical polymerization technique was introduced to prepared a homogeneous poly(N‐isopropylacrylamide)‐g‐poly(sulfobetaine methacrylate) hydrogel (RG) possessing a highly porous architecture via two steps. Compared to a poly(N‐isopropylacrylamide)‐co‐poly(sulfobetaine methacrylate) hydrogel (CG) prepared by conventional radical polymerization, RG exhibited a much faster shrinking rate (it lost over 72% of the water in 15 min) in response to the temperature changes. The release behaviors of tetracycline hydrochloride (TCHC) of the hydrogels indicated the TCHC release from the RG could be prolonged to 48 h at 37°C; this was much longer than that for CG (5 h at 37°C). Bovine serum albumin (BSA) was chosen as the model protein to examine the low‐fouling properties of the RG. The BSA adsorption data showed that improved antifouling properties could be achieved by the RG at both 25 and 37°C. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39816.     

Preparation of Poly (methacrylic acid)–Graphene Oxide Nanocomposite as a pH-Sensitive Drug Carrier Through in-situ Copolymerization of Methacrylic Acid with Polymerizable Graphene

A polymerizable Graphene Oxide (Graphene Oxide Monomer, GOM) was synthesized through attaching vinyl groups onto graphene oxide sheets. GOM was copolymeized with methacrylic acid in different ratios. Obtained nanocomposites were characterized by FT-IR, XRD, SEM and EDX to study their properties. Naproxen was entrapped in these pH-sensitive nano-carriers and the in vitro release profiles were established in both enzyme-free simulated gastric and intestinal fluids (SGF, pH 1) and (SIF, pH 7.4) respectively. It was observed that the drug release in SIF was higher, hence the prepared nanocomposite could be considered as a suitable carrier for colon specific drug delivery.     

Dual‐responsive semi‐interpenetrating network beads based on calcium alginate/poly(N‐isopropylacrylamide)/poly(sodium acrylate) for sustained drug release

To improve the mechanical strength of natural hydrogels and to obtain a sustained drug‐delivery device, temperature‐/pH‐sensitive hydrogel beads composed of calcium alginate (Ca‐alginate) and poly(N‐isopropylacrylamide) (PNIPAAm) were prepared in the presence of poly(sodium acrylate) (PAANa) with ultrahigh molecular weight (M_η ≥ 1.0 × 10⁷) as a strengthening agent. The influence of PAANa content on the properties, including the beads stability, swelling, and drug‐release behaviors, of the hydrogels was evaluated. Scanning electron microscopy and oscillation experiments were used to analyze the structure and mechanical stability of the hydrogel beads, respectively. The results show that stability of the obtained Ca‐alginate/PNIPAAm hydrogel beads strengthened by PAANa the alginate/poly(N‐isopropyl acrylamide) hydrogel bead (SANBs) was significantly improved compared to that of the beads without PAANa (NANBs) at pH 7.4. The swelling behavior and drug‐release capability of the SANBs were markedly dependent on the PAANa content and on the environmental temperature and pH. The bead sample with a higher percentage of PAANa exhibited a lower swelling rate and slower drug release. The drug release profiles from SANBs were further studied in simulated intestinal fluid, and the results demonstrated here suggest that SANBs could serve as a potential candidate for controlled drug delivery in vivo. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Effect of attapulgite contents on release behaviors of a pH sensitive carboxymethyl cellulose‐g‐poly(acrylic acid)/attapulgite/sodium alginate composite hydrogel bead containing diclofenac

A series of pH‐sensitive composite hydrogel beads, carboxymethyl cellulose‐g‐poly(acrylic acid)/attapulgite/sodium alginate (CMC‐g‐PAA/APT/SA), were prepared by combining CMC‐g‐PAA/APT composite and SA, using Ca²⁺ as the ionic crosslinking agent and diclofenac sodium (DS) as the model drug. The effects of APT content and external pH on the swelling properties and release behaviors of DS from the composite hydrogel beads were investigated. The results showed that the composite hydrogel beads exhibited good pH‐sensitivity. Introducing 20% APT into CMC‐g‐PAA hydrogel could change the surface structure of the composite hydrogel beads, decrease the swelling ability, and relieve the burst release effect of DS. The drug cumulative release ratio of DS from the hydrogel beads in simulated gastric fluid was only 3.71% within 3 hour, but in simulated intestinal fluid about 50% for 3 hour, 85% for 12 hour, up to 90% after 24 hour. The obtained results indicated that the CMC‐g‐PAA/APT/SA hydrogel beads could be applied to the drug delivery system as drug carriers in the intestinal tract. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Semi‐interpenetrating polymer network beads of crosslinked chitosan–glycine for controlled release of chlorphenramine maleate

Spherical, semi‐interpenetrating polymer network beads of chitosan and glycine, crosslinked with different concentrations of glutaraldehyde were prepared for controlled release of drugs. The structural and morphological studies of the beads were carried out with FTIR and SEM techniques. The swelling behavior of the beads at different time intervals was monitored in solutions of different pH. Structural changes of the beads in response to solution pH were put forward using the data obtained from IR/UV spectral analysis. The release experiments were performed in solutions of pH 2.0 and pH 7.4 at 37°C, using chlorphenramine maleate as a model drug. The results indicate that, chitosan might be useful as a vehicle for controlled release of drugs. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 672–683, 2000     

Preparation and properties of core–shell alginate–carboxymethylchitosan hydrogels

BACKGROUND: Hydrogels of alginate (ALG) with partially carboxymethylated chitosan (CMCHI) have been produced for drug delivery, based on the interactions between the negative groups and an ionic crosslinker. In the present work, CMCHI was used to evaluate the influence of amino groups that are positively charged at pH = 4 and 6 on the ALG–CMCHI core–shell hydrogel preparation. An ANOVA statistics tool was used to evaluate the effect of composition, pH and chitosan chemical nature on the morphology and swelling properties of the hydrogels in simulated gastric fluid (SGF) and simulated intestinal fluid (SIF). RESULTS: The ALG–CMCHI core–shell hydrogels presented smaller (ca 2.3 µm) and more homogeneous microparticles than those with unmodified chitosan (ca 5.5 µm). The ALG–CMCHI hydrogels showed higher thermal stability and lower degree of swelling in SGF (314%) compared to those with chitosan (708%), since in the former hydrogels the protective layers that surround the particles are negatively charged. CONCLUSION: CMCHI can replace chitosan in the production of core–shell hydrogels with improved properties since the negative charge surrounding the ALG–CMCHI particles favours a lower degree of swelling. The results point out a possible prevention of burst release in SGF, sustaining the swelling ability of the ALG–CMCHI core–shell hydrogels in SIF, promising appropriate drug release. Copyright © 2009 Society of Chemical Industry     

Alginate/carboxymethyl chitosan composite gel beads for oral drug delivery

This paper reports the synthesis of pH-sensitive gel beads derived from alginate (SA) and carboxymethyl chitosan (CMCS) for drug delivery. The composite SA/CMCS gel beads were prepared by dual ionic gelation: one ionic gelation between SA and Ca²⁺ and another one between CMCS and β-Sodium glycerophosphate (β-GP). The structure properties of hydrogel beads were characterized by SEM, IR and TG technique. The influence of the polymer composition and cross-linkers on the gel swelling property was investigated. When the concentration of CMCS and SA were 3 % and the volume ratio was 1:2, the swelling rate of gel beads crosslinked by β-GP and CaCl₂ solution can increase up to 31.2 and the swelling time can reach 10.5 h. In the drug release study, bovine serum albumin (BSA) was chosen as model drugs. The results indicated that BSA released slowly from the gel beads at pH 1.2 and the release ratio was about 10 %. At pH 7.4, the amounts of BSA released increased significantly as compared to those released at pH 1.2 and the total release time was extended to 11 h. The composite gel system demonstrates sustained release profile and pH sensitivity, which can be considered as good candidates for oral drug delivery systems.     

Structural change and swelling mechanism of pH‐sensitive hydrogels based on chitosan and D,L‐lactic acid

Graft copolymerization of D,L ‐lactic acid (LA) onto chitosan (CS) was attempted without using a catalyst. pH‐sensitive hydrogels were obtained which are based on two different components: a natural polymer and a synthetic polymer. These polyester substituents provide the basis for hydrophobic interactions that contribute to the formation of hydrogels. The swelling mechanisms in enzyme‐free simulated gastric fluid (SGF, pH 2.2) or simulated intestinal fluid (SIF, pH 7.4) at 37°C were investigated. Meanwhile, structural changes of the graft copolymers in the different pH buffers were studied by FTIR, and these are discussed together with the swelling mechanisms. The effect of pH on the water uptake of hydrogel was investigated by using McIlvaine buffer with the same ionic strength. The morphological change of hydrogels in different aqueous solutions is investigated by scanning electron microscopy (SEM). © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 3186–3192, 1999     

Design and fabrication of a triple-responsive chitosan-based hydrogel with excellent mechanical properties for controlled drug delivery

A pH-, temperature- and salinity responsive hydrogel with enhanced mechanical performance was developed based on semi interpenetrating network that was formed as a result of concurrent free radical polymerization of acrylic acid (AA), oligo(ethylene glycol) methacrylate (OEGMA) and 2-(2-methoxyethoxy) ethyl methacrylate (MEO₂MA) along with chitosan (CS) for controlled drug delivery. The mechanical behaviors and swelling properties of these hydrogels were systematically investigated, and the results indicated that they were strongly affected by the content of AA and MEO₂MA and exhibited strong pH-, temperature and salinity sensitivity. Bovine serum albumin (BSA) and 5-Fluorouracil (5-Fu) were used as the model drugs to evaluate the sustained release of the hydrogel. The result indicated that the amount of both drugs released was relatively low in acidic condition (pH 1.2) but high in neutral environment (pH 7.4), and the release rate of the drugs was slower at 37 °C than that at 25 °C. Cytotoxicity results suggested that the blank hydrogels had negligible toxicity to normal cells, whereas the 5-Fu-loaded hydrogels remained high in cytotoxicity for LO2 and HepG2 cancer cells. These results suggest that the synthesized hydrogels have the potential to be used as an effective pH/temperature sustainable site-specific oral drug delivery in intestine and colon.     

Preparation and characterization of a positive thermoresponsive hydrogel for drug loading and release

A positive thermoresponsive hydrogel composed of poly(acrylic acid)‐graft‐β‐cyclodextrin (PAAc‐g‐β‐CD) and polyacrylamide (PAAm) was synthesized with the sequential interpenetrating polymer network (IPN) method for the purpose of improving its loading and release of drugs. The structure and properties of the PAAc‐g‐β‐CD/PAAm hydrogel (IPN hydrogel) were characterized with Fourier transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and swelling measurements. FTIR studies showed that the IPN hydrogel was primarily composed of an IPN of PAAc‐g‐β‐CD and PAAm. The data from DSC and swelling measurements indicated that the phase‐transition temperature or upper critical solution temperature (UCST) of the IPN hydrogel was approximately 35°C. Through the measurement of the temperature dependence of the swelling, increases in the UCST and non‐sensitivity to changes in the salt concentration were observed for the IPN hydrogel versus the normal IPN hydrogel poly(acrylic acid)/PAAm (without β‐cyclodextrin). Furthermore, the swelling/deswelling kinetics of the IPN hydrogel also exhibited an improved controllable response rate versus the normal IPN hydrogel. Ibuprofen (IBU) was chosen as the model drug for examining loading and release from the IPN hydrogel. The experimental data proved that the IPN hydrogel provided a positive drug release pattern; the IBU released faster at 37°C than at 25°C, and improved drug loading and controlled release were achieved by the IPN hydrogel versus the normal IPN hydrogel. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Controlled dual release study of curcumin and a 4‐aminoquinoline analog from gum acacia containing hydrogels

The potential of gum acacia containing hydrogels as controlled dual‐drug delivery systems for antiprotozoal agents was investigated. 4‐Aminoquinoline analog and curcumin were selected as model drugs because they exhibit antiprotozoal activity. The maximum release time was greater for curcumin than for the 4‐aminoquinoline analog at 37°C, thereby enabling the active ingredients to work over different periods of time. 4‐Aminoquinoline analog exhibited a short term release profile while curcumin exhibited a sustained and long term release profile. The release profiles of the drugs were found to be influenced by the degree of crosslinking of the hydrogel network with gum acacia. The release profiles were analyzed using a power law equation proposed by Peppas. The release mechanism of the 4‐aminoquinoline was found to be anomalous transport while that of curcumin was quasi‐Fickian diffusion mechanism in all the hydrogel networks according to the release exponent. The preliminary results suggest that these systems are potential dual‐drug delivery system for antiprotozoal agents with different pharmacokinetics. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41613.     

Photopolymerized pH‐sensitive semi‐IPN: Synthesis,water uptake analysis,and preliminary drug release study

A series of pH‐sensitive semi‐IPN hydrogels, composed of varying amounts of monomer acrylic acid(AAc), crosslinker N,N′ methylene bisacrylamide, polymer cellulose acetate (CA) were synthesized via photoinitiated polymerization in dimethyl formamide (DMF) medium. The CA/P (AAc) hydrogels were characterized by FTIR, and TG analysis. The equilibrium water uptake data was used to determine various network parameters. For all the samples synthesized, the swelling exponent “n,” initial diffusion coefficient D and average diffusion coefficient D_ave were found to be in the range of 0.51–0.72, 3.16 to 7.14 × 10^?6 cm² min^?1 and 94.16–120.56 cm² min^?1, respectively. The hydrogel demonstrated fair pH‐dependent swelling behavior, with nearly 20% swelling in the medium of pH 1.0 and 615% in the medium of pH 7.4 at 37°C, respectively. The gel showed excellent swelling–deswelling cycles which were interpreted quantitatively by first order kinetic swelling and deswelling models. Finally, the preliminary insulin release study, carried out in the media of varying pH, observed almost 16% release of entrapped drug in the simulating gastric fluid (SGF) of pH 1.0 in first 2 h and nearly 51% in next 6 h in simulating intestinal fluid(SIF) of pH 7.4 at 37°C. POLYM. ENG. SCI., 53:2129–2140, 2013. © 2013 Society of Plastics Engineers