Development of Functional Polyurethane–ZnO Hybrid Nanocomposite Coatings from Thevetia peruviana Seed Oil

The present article reports eco‐friendly multi‐functional polyurethane–ZnO hybrid nanocomposite coatings obtained from Thevetia peruviana seed oil (TPSO). Initially, the polyols were prepared by treating TPSO with glycerol and the formation was supported by Fourier transform infrared (FT‐IR) and ¹H‐NMR studies. In the next stage, siloxane functionalized ZnO nanoparticles were added to the polyol mixture in different weight percentages (0, 1 and 2 %) and then treated with excess 4,4′‐diisocyanatodicyclohexylmethane (H₁₂MDI) in order to synthesize isocyanate terminated polyurethane nanocomposites. The polyurethane hybrids were then casted as thin films and cured under atmospheric moisture. After complete curing they were characterized by using FT‐IR, ¹H‐NMR, ¹³C‐NMR, X‐ray diffraction, scanning electron microscopy, thermogravimetric analysis, and dynamic mechanical thermal analysis techniques. The hybrid nanocomposites showed superior thermo‐mechanical and anti‐corrosive properties compared to pristine polyurethane. Also, due to the presence of nano ZnO in the polyurethane matrix, the composite coatings are showing excellent resistance towards various bacterial and fungal stains.     

Synthesis and properties of polyurethane‐urea‐based liquid bandage materials

To obtain ideal liquid bandage polymer materials, a series of polyurethane‐urea dispersions were synthesized from 4,4′‐diisocyanato dicyclohexylmethane (H₁₂MDI) and ethylene diamine with different molar ratio of polyol blend [polyethylene glycol (PEG, M_n = 2000 g/mol)/hydroxy terminated poly(dimethylsiloxane) (PDMS, M_n = ～ 550 g/mol)] and acetone/ethanol as a solvent. The effect of PDMS content in PEG/PDMS on the viscosity, mechanical properties, water contact angle/surface energy, insolubility in water (%), water absorption (%), equilibrium water content (%), and water vapor transmission rate (g m^?2 day^?1) of polyurethane‐urea films was investigated. As PDMS content increased, the water contact angle, insolubility in water, and tensile strength/elastic recovery of film sample increased; however, the surface energy, water absorption (%), equilibrium water content (%), and water vapor transmission rate (g m^?2 day^?1) of film sample decreased. By a wound‐healing evaluation using a full‐thickness rat model experiment, it was found that a wound covered with a typical polyurethane‐urea liquid bandage film (PD2 sample) was filled with new epithelium without any significant adverse reactions. These results suggest that the polyurethane‐urea‐based liquid bandages (samples: PD2 and PD3) prepared in this study may have high potential as new wound dressing materials, which provide and maintain the adequate wet environment required to prevent scab formation and dehydration of the wound bed. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Organosoluble polyimides derived from asymmetric 2‐substituted‐and 2,2′,6‐trisubstituted‐4,4′‐oxydianilines

We report a new method for the preparation of asymmetric diamines using 4,4′‐oxydianiline (4,4′‐ODA) as the starting material. By controlling the equivalents of bromination agent, N‐bromosuccinimide, we were able to attach bromide and phenyl substituents at the 2‐ or 2,2′,6‐positions of 4,4′‐ODA. Thus, four new asymmetric aromatic diamines, 2‐bromo‐4,4′‐oxydianiline (6), 2,2′,6‐tribromo‐4,4′‐oxydianiline (7), 2‐phenyl‐4,4′‐oxydianiline (8) and 2,2′,6‐triphenyl‐4,4′‐oxydianiline (9), were synthesized by this method. Their structural asymmetry was confirmed using ¹H NMR spectroscopy. Asymmetric polyimides (PI10–PI13) were prepared from these diamines and three different dianhydrides (pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride) in refluxing m‐cresol. The formed polyimides, except PI10a derived from 6 and PMDA, were all soluble in m‐cresol without premature precipitation during polymerization. These polyimides with inherent viscosity of 0.41–0.96 dL g^?1, measured at a concentration of 0.5 g dL^?1 in N‐methyl‐2‐pyrrolidone at 30 °C, can form tough and flexible films. Because of the structural asymmetry, they also exhibited enhanced solubility in organic solvents. Especially, polyimides PI11a and PI13a derived from 7 and 9 with rigid PMDA were soluble in various organic solvents at room temperature. The structural asymmetry of the prepared polyimides was also evidenced from ¹H NMR spectroscopy. In the ¹H NMR spectrum of PI11a, the protons of pyromellitic moiety appeared in an area ratio of 1:2:1 at three different chemical shifts, which were assigned to head‐to‐head, head‐to‐tail and tail‐to‐tail configurations, respectively. These polyimides also exhibited good thermal stability. Their glass transition temperatures ranged from 297 to 344 °C measured using thermal mechanical analysis. © 2013 Society of Chemical Industry     

Solution‐state NMR analysis of hydroxymethylated resorcinol cured in the presence of crude milled‐wood lignin from Acer saccharum

Resorcinol‐formaldehyde adhesives can reinforce stress fractures that appear from wood surface preparation. Researchers have found that applying the resorcinol‐formaldehyde prepolymer, hydroxymethylated resorcinol, to the surface of wood improves the bond strength of epoxy and polyurethane adhesives to wood. Hydroxymethylated resorcinol is thought to plasticize lignin components and stabilize stress fractures through reactions with lignin subunits and hemicelluloses in wood. In this study, a dilute solution of hydroxymethylated resorcinol (HMR) is cured in the presence of a crude milled‐wood lignin (cMWL) from Acer saccharum and subsequently dissolved in dimethylsulfoxide‐d₆ to delineate reactivity with lignin and O‐acetyl‐(4‐O‐methylglucurono)xylan using solution‐state NMR spectroscopy. ¹H–¹³C single‐bond correlation NMR experiments revealed that the HMR only formed 4,4′‐diarylmethane structures with itself in the presence of the cMWL; the 2‐methylols that formed remained free and did not crosslink with resorcinol. Cured HMR resin formed both 4,4′‐ and 2,4‐diarylmethane structures, confirming that the presence of lignin and O‐acetyl‐(4‐O‐methylglucurono)xylan hinders crosslinking at the C‐2 position. No evidence of reactivity between HMR and lignin subunits was found. New peaks consistent with ester linkages were observed in ¹³C‐NMR spectra of the cMWL sample treated with HMR that may be attributable to HMR moieties condensing with glucuronic acid substituents. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45398.     

Effect of organosilica isomers on the interfacial interaction in polyimide/aromatic organosilica hybrids

We report the effect of organosilica precursor isomers on the interfacial interaction between polyimide and organosilica in polyimide/organosilica hybrid composite films. Poly(4,4′‐oxydianiline biphenyltetracarboxamic acid) (BPDA‐ODA PAA) was used as the polyimide precursor, while the organosilica was made using o‐substituted, m‐substituted, and p‐substituted phenyl organosilica precursor isomers. For the preparation of precursor hybrid films, BPDA‐ODA PAA and organosilica precursors were mixed and then the organosilica precursors were converted to corresponding organosilica via sol–gel process. Finally, these precursor films were converted to corresponding polyimide/organosilica hybrid films by the thermal imidization of BPDA‐ODA PAA, which results in poly(4,4′‐oxydianiline biphenyltetracarboximide) (BPDA‐ODA PI). The polyimide/organosilica hybrid films were characterized using three distinctive nuclear magnetic resonance spectroscopies (¹H NMR, ¹³C‐CPMAS‐NMR, and ²⁹Si‐MAS‐NMR), wide‐angle X‐ray diffraction (WAXD), small‐angle X‐ray scattering (SAXS), and peel strength measurement. We found that the m‐substituted phenyl organosilica shows poorer interfacial interaction with BPDA‐ODA PI than do the o‐ or p‐substituted phenyl organosilicas. It was observed, however, that the peel strength of the hybrid films against an aluminum substrate increased with increasing contents of organosilicas, regardless of the nature of the organosilica isomers. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 2507–2513, 2007     

Synthesis and characterization of novel wholly para‐oriented aromatic polyamide‐hydrazides containing sulfone‐ether linkages

Four novel wholly para‐oriented aromatic polyamide‐hydrazides containing flexibilizing sulfone‐ether linkages in their main chains have been synthesized from 4‐amino‐3‐hydroxy benzhydrazide (4A3HBH) with either 4,4′‐sulfonyldibenzoyl chloride (SDBC), 4,4′‐[sulfonylbis(1,4‐phenylene)dioxy]dibenzoyl chloride (SODBC), 4,4′‐[sulfonylbis(2,6‐dimethyl‐1,4‐phenylene)dioxy]dibenzoyl chloride (4MeSODBC), or 4,4′‐(1,4‐phenylenedioxy)dibenzoyl chloride (ODBC) via a low‐temperature solution polycondensation reaction. A polyamide‐hydrazide without the flexibilizing linkages is also investigated for comparison. It was synthesized from 4A3HBH and terephthaloyl chloride (TCl) by the same synthetic route. The intrinsic viscosities of the polymer ranged from 2.85 to 4.83 dL g^?1 in N,N‐dimethyl acetamide (DMAc) at 30°C and decreased with introducing the flexibilizing linkages into the polymer. All the polymers were soluble in DMAc, N,N‐dimethyl formamide (DMF), and N‐methyl‐2‐pyrrolidone (NMP), and their solutions could be cast into films with good mechanical strengths. Further, they exhibited a great affinity to water sorption. Their solubility and hydrophilicity increased remarkably by introducing the flexibilizing linkages. The polymers could be thermally cyclodehydrated into the corresponding poly(1,3,4‐oxadiazolyl‐benzoxazoles) approximately in the region of 295–470°C either in nitrogen or in air atmospheres. The flexibilizing linkages improve the solubility of the resulting poly(1,3,4‐oxadiazolyl‐benzoxazoles) when compared with poly(1,3,4‐oxadiazolyl‐benzoxazoles) free from these linkages. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Thermally stable polyurethane‐ureas and copolyurethane‐ureas containing zinc and nickel dihydroxysaltrien complexes

New 4,4′‐dihydroxysaltrien metal complexes, (MOHSal₂trien, where M = Zn and Ni) were synthesized and used for the synthesis of metal‐containing polyurethane‐ureas and copolyurethane‐ureas. MOHSal₂trien underwent polymerization reaction with two diisocyanates, namely 4,4′‐diphenylmethane diisocyanate (MDI) and isophorone diisocyanate (IPDI) to yield polyurethane‐ureas. Copolyurethane‐ureas were synthesized by the reaction between MOHSal₂trien, MDI, and diamines or dialcohols. The diamines or dialcohols employed were 4,4′‐methylenedianiline (MDA), hexamethylenediamine (HMA), bisphenol A (BPO), and hexamethylene glycol (HMO). The polymers were characterized by IR, NMR, elemental analysis, XRD, solubility, and viscosity. Thermal stability and flammability of polymers were studied by thermogravimetric analysis (TGA) in air and by measuring limiting oxygen index (LOI) values, respectively. It was found that the resulting metal‐containing polyurethane‐ureas and copolyurethane‐ureas exhibited good thermal stability. Among all metal‐containing polyurethane‐ureas, NiOHSal₂trien‐MDI was the most thermally stable polymer with char yield of 55% at 600°C. Solubility in DMSO of zinc‐containing copolyurethane‐ureas based on dialcohols was greatly improved when compared with those of zinc‐ and nickel‐containing polyurethane‐ureas. ZnOHSal₂trien‐MDI‐BPO and ZnOHSal₂trien‐MDI‐HMO gave high char yield of 46% at 600°C, which is almost comparable with that of NiOHSal₂trien‐MDI. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Studies on polyurethanes and polyurethane–ureas derived from divalent metal salts of mono(hydroxybutyl) hexolate

Divalent metal salts of mono(hydroxybutyl)hexolate [M(HBH)₂), M=Ca²⁺, Mn²⁺or Pb²⁺] were synthesized by the reaction of 1,4‐butanediol, 5,6,7,8,10,10‐hexachloro‐3a,4,4a,5,8,8a,9,9a‐octahydro‐5,8‐methanonaphtho‐[2,3‐C]‐furan‐1,3‐dione and divalent metal acetates. Hexamethylene bis [N′‐(1‐hydroxy‐2‐methyl‐prop‐2‐yl)urea] (HBHMPU) and tolylene 2,4‐bis[N ′‐(1‐hydroxy‐2‐methyl‐prop‐2‐yl)urea] (TBHMPU) were synthesized by reacting 2‐amino‐2‐methyl‐propan‐1‐ol with hexamethylene diisocyanate (HMDI) and tolylene 2,4‐diisocyanate (TDI), respectively, in toluene solvent. Flame‐retardant metal‐containing polyurethanes were synthesized by the solution polymerization of HMDI with M(HBH)₂ and the polyurethane–ureas by reacting HMDI with 1:1 mixture of M(HBH)₂ and HBHMPU or TBHMPU, respectively, in DMSO as solvent. The polymers have been characterized by elemental analysis, solubility, viscosity and IR and ¹H NMR spectroscopy. The thermal stability of the polymers has been studied by thermogravimetry. The flame‐retardant property of the polymers has been investigated by measuring limiting oxygen index values. © 2000 Society of Chemical Industry     

Synthesis and characterization of a novel oligosiloxane containing alternative ladderlike structure via charge‐transfer interaction

A novel oligosiloxane containing alternative ladderlike structure involving viologen groups has been prepared via donor–acceptor interaction‐assisted template polymerization. The monomer used as the electron‐donor component, N,N ′‐bis(3‐methyldimethoxyl‐silylpropyl)‐4,4′‐bipyridinium dihexafluorophosphate and its precursor, N,N ′‐bis(3‐methyldimethoxyl‐silylpropyl)‐4,4′‐bipyridinium dibromide were first synthesized successfully in high yield. This oligosiloxane, which displays interesting electrochromic properties, has been characterized by FTIR, UV–vis, ¹H NMR, ²⁹Si NMR, X‐ray diffraction (XRD), and vapour pressure osmometry (VPO). © 2001 Society of Chemical Industry     

Synthesis of aromatic poly(urea‐imide) with heterocyclic side‐chain structure

The poly(urea‐imide) copolymers with inherent viscosity of 0.81–1.08 dL/g were synthesized by reacting aryl ether diamine or its polyurea prepolymer with various diisocyanate‐terminated polyimide prepolymers. The aryl ether diamine was obtained by first nucleophilic substitution of phenolphthalein with p‐chloronitrobenzene in the presence of anhydrous potassium carbonate to form a dinitro aryl ether, and then further hydrogenated to diamine. The polyimide prepolymers were prepared by using 4,4′‐diphenylmethane diisocyanate to react with pyromellitic dianhydride, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride, or 3,3′,4,4′‐sulfonyldiphthalic anhydride by using the direct one‐pot method to improve their solubility, but without sacrificing thermal property. These copolymers are amorphous and readily soluble in a wide range of organic solvents such as N‐methyl‐2‐pyrrolidone, dimethylimidazole, N,N‐dimethylacetamide, dimethyl sulfoxide, N,N‐dimethylformamide, m‐cresol, and sulfolane. All the poly(urea‐imides) have glass transition temperatures in the range of 205–240°C and show a 10 wt % loss at 326–352°C in nitrogen and 324–350°C in air. The tensile strength, elongation at break, and initial modulus of these copolymer films range from 42 to 79 MPa, 5 to 16%, and 1.23 to 2.02 GPa, respectively. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1719–1730, 1999     

Synthesis and electro‐optical properties of novel Y‐type polyurethanes containing dioxynitrostilbene

3,4‐Di‐(2′‐hydroxyethoxy)‐4′‐nitrostilbene (2) was prepared by the reaction of 2‐iodoethanol with 3,4‐dihydroxy‐4′‐nitrostilbene. Diol 2 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate and 1,6‐hexamethylenediisocyanate to yield novel Y‐type polyurethanes 3–5 containing dioxynitrostilbene as a non‐linear optical (NLO)‐chromophore. Polymers 3–5 were soluble in common organic solvents, such as acetone and DMF. These polymers showed thermal stability up to 280 °C in TGA thermograms with T_g values in the range of 100–143 °C in DSC thermograms. The approximate lengths of aligned NLO‐chromophores of the polymers estimated from AFM images were around 2 nm. The SHG coefficients (d₃₃) of poled polymer films were around 4.5 × 10^?8 esu. Poled polymer films had improved temporal and long‐term thermal stability owing to the hydrogen bonding of urethane linkage and the main‐chain character of the polymer structure, which are acceptable for NLO device applications. Copyright © 2004 Society of Chemical Industry     

Synthesis of novel polyurethanes containing dioxybenzylidenecyanoacetate,as non‐linear optical chromophores and their properties

Methyl 3,4‐di‐(2′‐hydroxyethoxy)benzylidenecyanoacetate (3) was prepared by hydrolysis of methyl 3,4‐di‐(2′‐vinyloxyethoxy)benzylidenecyanoacetate (2). Diol 3 was condensed with 2,4‐toluenediisocyanate, 3,3′‐dimethoxy‐4,4′‐biphenylenediisocyanate, and 1,6‐hexamethylenediisocyanate to yield polyurethanes 4, 5 and 6 containing the non‐linear optical (NLO) chromophore 3,4‐dioxybenzylidenecyanoacetate. The resulting polyurethanes 4–6 were soluble in common organic solvents such as acetone and DMF. T_g values of the polymers obtained from DSC thermograms were in the range 80–102 °C. Polymers 4–6 showed thermal stability up to 300 °C in TGA thermograms, and electro‐optic coefficients (r₃₃) of the poled polymer films were in the range 10–12 pm V^?1 at 633 nm, which are acceptable for NLO device applications. © 2002 Society of Chemical Industry     

Novel poly(thiourea‐ether‐imide)s derived from 4,4′‐oxydiphenyl‐bis(thiourea): probing the possibility for high‐temperature applications

Our interest in the fabrication of high‐performance polyimides has led to thiourea‐substituted poly(thiourea‐ether‐imide)s (PTEIs) with good retention of thermal properties along with flame retardancy. A new aromatic monomer, 4,4′‐oxydiphenyl‐bis(thiourea) (ODPBT), was efficiently synthesized and polymerized with various dianhydrides (pyromellitic dianhydride, 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride and 4,4′‐(hexafluoroisopropylidene)diphthalic dianhydride) via two‐stage chemical imidization to fabricate a series of PTEIs. The structural characterization of ODPBT and the polymers was carried out using Fourier transform infrared, ¹H NMR and ¹³C NMR spectral techniques along with crystallinity, organosolubility, inherent viscosity and gel permeation chromatographic measurements. PTEIs bearing C?S and ? O? moieties in the backbone demonstrated an amorphous nature and were readily soluble in various amide solvents. The novel polymers had inherent viscosities of 1.16–1.23 dL g^?1 and molecular weights of ca 90 783–96 927 g mol^?1. Their thermal stability was substantiated via 10% weight loss in the temperature range 516–530 °C under inert atmosphere. The polyimides had glass transition temperatures of 260–265 °C. Incorporation of thiourea functionalities into polymer backbones is demonstrated to be an effective way to enhance their thermal properties and flame retardancy. Thus, ODPBT can be considered as an excellent candidate for use in the synthesis of high‐performance polymeric materials. Copyright © 2010 Society of Chemical Industry     

Synthesis and properties of novel polyamides containing sulfone‐ether linkages and xanthene cardo groups

In order to obtain polyamides with enhanced solubility and processability, as well as good mechanical and thermal properties, several novel polyamides containing sulfone‐ether linkages and xanthene cardo groups based on a new diamine monomer, 9,9‐bis[4‐(4‐aminophenoxy)phenyl]xanthene (BAPX), were investigated. The BAPX monomer was synthesized via a two‐step process consisting of an aromatic nucleophilic substitution reaction of readily available 4‐chloronitrobenzene with 9,9‐bis(4‐hydroxyphenyl)xanthene in the presence of potassium carbonate in N,N‐dimethylformamide, followed by catalytic reduction with hydrazine and Pd/C. Four novel aromatic polyamides containing sulfone‐ether linkages and xanthene cardo groups with inherent viscosities between 0.98 and 1.22 dL g^?1 were prepared by low‐temperature polycondensation of BAPX with 4,4′‐sulfonyldibenzoyl chloride, 4,4′‐[sulfonyl‐bis(4‐phenyleneoxy)]dibenzoyl chloride, 3,3′‐[sulfonyl‐bis(4‐phenyleneoxy)]dibenzoyl chloride and 4,4′‐[sulfonyl‐bis(2,6‐dimethyl‐1,4‐phenyleneoxy)]dibenzoyl chloride in N,N‐dimethylacetamide (DMAc) solution containing pyridine. All these new polyamides were amorphous and readily soluble in various polar solvents such as DMAc and N‐methylpyrrolidone. These polymers showed relatively high glass transition temperatures in the range 238–298 °C, almost no weight loss up to 450 °C in air or nitrogen atmosphere, decomposition temperatures at 10% weight loss ranging from 472 to 523 °C and 465 to 512 °C in nitrogen and air, respectively, and char yields at 800 °C in nitrogen higher than 50 wt%. Transparent, flexible and tough films of these polymers cast from DMAc solution exhibited tensile strengths ranging from 78 to 87 MPa, elongations at break from 9 to 13% and initial moduli from 1.7 to 2.2 GPa. Primary characterization of these novel polyamides shows that they might serve as new candidates for processable high‐performance polymeric materials. Copyright © 2010 Society of Chemical Industry     

Synthesis of Carbon‐Rich Hybrid Foam from GAP‐Modified Polyurethane

4,4′‐Diisocyanato diphenylmethane (MDI)‐based polyurethanes melt and start to burn at 150–200 °C. Mainly H₂O, CO₂, CO, HCN, and N₂ are formed. The new modified polyurethane shows a different pyrolysis behavior. GAP‐diol (glycidyl azide polymer), which was used as a modifying agent, is a well‐known energetic binder with a high burning velocity and a very low adiabatic flame temperature. The modified polyurethane starts to burn at approximately 190 °C because of the emitted burnable gases, but it does not melt. The PU foam shrinks slightly and a black, solid, carbon‐rich hybrid foam remains. TGA and EGA‐FTIR revealed a three‐step decomposition mechanism of pure GAP‐diol, the isocyanate‐GAP‐diol, and PU‐GAP‐diol formulations. The first decomposition step is caused by an exothermic reaction of the azido group of the GAP‐diol. This decomposition reaction is independent of the oxygen content in the atmosphere. In the range of 190–240 °C the azido group spontaneously decomposes to nitrogen and ammonia. This decomposition is assumed to take place partly via the intermediate hydrogen azide that decomposes spontaneously to nitrogen and ammonia in the range of 190–240 °C. The second decomposition step was attributed to the depolymerization of the urethane and bisubstituted urea groups. The third decomposition step in the range of 500–750 °C was attributed to the carbonization process of the polymer backbone, which yielded solid, carbon‐rich hybrid foams at 900 °C. In air, the second and the third decomposition step shifted to lower temperatures while no solid carbon hybrid foam was left. Samples of PU‐GAP‐diol, which were not heated by a temperature program but ignited by a bunsen burner, formed a similar carbon‐rich hybrid foam. It was therefore concluded that the decomposition products of the hydrogen azide, ammonia and mainly nitrogen act as an inert atmosphere. FTIR, solid‐state ¹³C‐NMR, XRD, and heat conductivity measurements revealed a high content of sp²‐hybridized, aromatic structures in the hybrid foam. The carbon‐rich foam shows a considerable hardness coupled with high temperature resistance and large specific surface area of 2.1 m²⋅g⁻¹.     

Phosphorus‐containing epoxy resins: Thermal characterization

Three novel aromatic phosphorylated diamines, i.e., bis N,N′‐{3‐[(3‐aminophenyl)methyl phosphinoyl] phenyl} pyromellitamic acid (AP), 4,4′‐oxo bis N,N′‐{3‐[(3‐aminophenyl)methyl phosphinoyl] phenyl}phthalamic acid (AB) and 4,4′‐hexafluoroisopropylidene‐bis N,N′‐{3‐[(3‐aminophenyl)methyl phosphinoyl] phenyl}phthalamic acid (AF) were synthesized and characterized. These amines were prepared by solution condensation reaction of bis(3‐aminophenyl)methyl phosphine oxide (BAP) with 1,2,4,5‐benzenetetracarboxylic acid anhydride (P)/3,3′,4,4′‐benzophenonetetracarboxylic acid dianhydride (B)/4,4′‐(hexafluoroisopropylidene)diphthalic acid anhydride (F), respectively. The structural characterization of amines was done by elemental analysis, DSC, TGA, ¹H‐NMR, ¹³C‐NMR and FTIR. Amine equivalent weight was determined by the acetylation method. Curing of DGEBA in the presence of phosphorylated amines was studied by DSC and curing exotherm was in the temperature range of 195–267°C, whereas with conventional amine 4,4′‐diamino diphenyl sulphone (D) a broad exotherm in temperature range of 180–310°C was observed. Curing of DGEBA with a mixture of phosphorylated amines and D, resulted in a decrease in characteristic curing temperatures. The effect of phosphorus content on the char residue and thermal stability of epoxy resin cured isothermally in the presence of these amines was evaluated in nitrogen atmosphere. Char residue increased significantly with an increase in the phosphorus content of epoxy network. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2235–2242, 2002     

Synthesis and characterization of novel polyphenol species derived from bis(4‐aminophenyl)ether: Substituent effects on thermal behavior,electrical conductivity,solubility, and optical band gap

In this study, four different Schiff bases namely 4,4′‐oxybis[N‐(2‐hydroxybenzilidene)aniline] (2‐HBA), 4,4′‐oxybis[N‐(4‐hydroxybenzilidene)aniline] (4‐HBA), 4,4′‐oxybis[N‐(3,4‐dihydroxybenzilidene)aniline] (3,4‐HBA), and 4,4′‐oxybis[N‐(4‐hydroxy‐3‐methoxybenzilidene)aniline] (HMBA) were synthesized. These Schiff bases were converted to their polymers that have generate names of poly‐4,4′‐oxybis[N‐(2‐hydroxybenzilidene)aniline] (P‐2‐HBA), poly‐4,4′‐oxybis[N‐(4‐hydroxybenzilidene)aniline] (P‐4‐HBA), poly‐4,4′‐oxybis[N‐(3,4‐dihydroxybenzilidene)aniline] (P‐3,4‐HBA), and poly‐4,4′‐oxybis[N‐(4‐hydroxy‐3‐methoxybenzilidene)aniline] (PHMBA) via oxidative polycondensation reaction by using NaOCl as the oxidant. Four different metal complexes were also synthesized from 2‐HBA and P‐2‐HBA. The structures of the compounds were confirmed by FTIR, UV‐vis, ¹H and ¹³C NMR analyses. According to ¹H NMR spectra, the polymerization of the 2‐HBA and 4‐HBA largely maintained with C? O? C coupling, whereas the polymerization of the 3,4‐HBA and HMBA largely maintained with C? C coupling. The characterization was made by TG‐DTA, size exclusion chromatography and solubility tests. Also, electrical conductivity of the polymers and the metal complex compounds were measured, showing that the synthesized polymers are semiconductors and their conductivities can be increased highly via doping with iodine ions (except PHMBA). According to UV–vis measurements, the optical band gaps (E_g) were found to be 3.15, 2.06, 3.23, 3.02, 2.61, 2.47, 2.64, 2.42, 2.83, 2.77, 2.78, and 2.78 for 2‐HBA, P‐2‐HBA, 4‐HBA, P‐4‐HBA, 3,4‐HBA, P‐3,4‐HBA, HMBA, PHMBA, 2‐HBA‐Cu, 2‐HBA‐Co, P‐2‐HBA‐Cu, and P‐2‐HBA‐Co, respectively. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Chemical degradation of polyurethanes. II. Degradation of microporous polyurethane elastomer by phosphoric acid esters

Microporous polyurethane elastomer, based on 4,4′‐diphenylmethane diisocyanate and polyester polyol Bayflex 2003 (Bayer AG), was degraded by phosphoric acid esters  (CH₃CH₂O)₃P(O) and (ClCH₂CH₂O)₃P(O) at 180°C. Structure of degraded products was investigated by means of ¹H‐, ¹³C‐, and ³¹P‐NMR spectroscopy. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 886–893, 2000     

Highly fluorinated poly(ether‐imide)s derived from 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether and aromatic dianhydrides

A new diamine, 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐diaminodiphenyl ether (FPAPE) was synthesized through the Suzuki coupling reaction of 2,2′‐diiodo‐4,4′‐dinitrodiphenyl ether with 3,4,5‐trifluorophenylboronic acid to produce 2,2′‐bis(3,4,5‐trifluorophenyl)‐4,4′‐dinitrodiphenyl ether (FPNPE), followed by palladium‐catalyzed hydrazine reduction of FPNPE. FPAPE was then utilized to prepare a novel class of highly fluorinated all‐aromatic poly(ether‐imide)s. The chemical structure of the resulting polymers is well confirmed by infrared and nuclear magnetic resonance spectroscopic methods. Limiting viscosity numbers of the polymer solutions at 25 °C were measured through the extrapolation of the concentrations used to zero. M_n and M_w of these polymers were about 10 000 and 25 000 g mol^?1, respectively. The polymers showed a good film‐forming ability, and some characteristics of their thin films including color and flexibility were investigated qualitatively. An excellent solubility in polar organic solvents was observed. X‐ray diffraction measurements showed that the fluoro‐containing polymers have a nearly amorphous nature. The resulting polymers had T_g values higher than 340 °C and were thermally stable, with 10% weight loss temperatures being recorded above 550 °C. Based on the results obtained, FPAPE can be considered as a promising design to prepare the related high performance polymeric materials. Copyright © 2011 Society of Chemical Industry     

Synthesis of palm oil‐based polyester polyol for polyurethane adhesive production

Palm oil‐based polyester polyol is synthesized by ring opening reaction on epoxidized palm olein by phthalic acid. The reaction is carried out in a solvent free and noncatalyzed condition with the optimal reaction condition at 175°C for 5 h reaction time. The physical state of the product is a clear bright yellowish liquid with low viscosity value of 5700–6700 cP at 25°C and pour point of 15°C. The chemical structure and molecular weight of the polyester polyol were characterized by FTIR, ¹H‐NMR, ¹³C‐NMR, and GPC. The optimal polyol with molecular weight of 36,308 dalton and hydroxyl value of 78.17 mg KOH/g sample was reacted with polymeric 4,4′‐methylene diphenyl diisocyanate (pMDI) at isocyanate index of 1.3 to produce polyurethane adhesive. The lap shear strength of the polyurethane adhesive showed two times higher than the commercial wood adhesives. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2014 , 131, 39967.