Hardware-software architecture of the SWAN Wireless ATM network

The SWAN (Seamless Wireless ATM Network) system provides end-to-end ATM connectivity to mobile end-points equipped with RF transceivers for wireless access. Users carrying laptops and multimedia terminals can seamlessly access multimedia data over a backbone wired network while roaming among room-sized cells that are equipped with basestations. The research focus on how to make ATM mobile and wireless distinguishes SWAN from present day mobile-IP based wireless LANs. This paper describes the design and implementation of the ATM-based wireless last-hop, the primary components of which are the air-interface control, the medium access control, and the low-level ATM transport and signalling.The design is made interesting by its interplay with ATM; in particular, by the need to meaningfully extend over the wireless last-hop the service quality guarantees made by the higher level ATM layers. The implementation, on the other hand, is an example of hardware-software co-design and partitioning. A key component of the wireless hop implementation is a custom designed reconfigurable wireless adapter card called FAWN (Flexible Adapter for Wireless Networking) which is used at the mobiles as well as at the basestations. The functionality is partitioned three-way amongst dedicated reconfigurable hardware on FAWN, embedded firmware on FAWN, and device driver software on a host processor. Using an off-the-shelf 625 Kbps per channel radio, several of which can be supported by a single FAWN adapter to provide multiple channels, per-channel unidirectional TCP data throughput of 227 Kbps (or, 454 Kbps bidirectional) and per-channel unidirectional native ATM data throughput of 210 Kbps (or, 420 Kbps bidirectional) have been obtained.     

A signaling and control architecture for mobility support in wireless ATM networks

This paper presents a signaling and control architecture for mobility support in a wireless ATM network that provides integrated broadband services to mobile terminals. A system level protocol architecture for a wireless ATM network is outlined. The proposed protocol stack incorporates new wireless link MAC, DLC and wireless control sublayers, together with appropriate mobility extensions to the existing ATM network control layer. Wireless control and ATM signaling capabilities required for mobility support are discussed, and preliminary solutions are given for selected major functions. Potential extensions to standard Q.2931 ATM signaling are proposed to support handoff and service parameter/QoS renegotiation required for mobility. An associated wireless control protocol for supporting terminal migration, resource allocation, and handoff is discussed. Preliminary experimental results are given which validate the proposed handoff control protocol on an ATM network testbed.     

移动多媒体通信中无线AIM接入和结构

本文讨论移动多媒体通信中无线ＡＴＭ的基本概念和结构，包括无线ＡＴＭ概念，ＡＴＭ无线接入，无线ＡＴＭ网络，协议，信元和传输结构。研究无线信道给移动多媒体通信带来的影响和解决方法。     

Mobility support for IP over wireless ATM

A wireless ATM system consists of a core network infrastructure that provides mobility support to end terminals and a wireless access link. This article outlines two schemes for supporting mobility of IP terminals in this network. In the first scheme, location management and handoff support is integrated within the ATM signaling and control framework (“mobile ATM”), and mobility is transparently supported at the IP layer by mobile ATM underneath. In the second approach, the IP protocol stack is directly executed on ATM switches (without an intermediate ATM signaling stack) using an IP switching technique called IPSOFACTO (IP Switching Over Fast ATM Cell Transport), and terminal mobility is supported via mobile IP     

Signaling stack design for wireless ATM access networks

One of the challenges in designing a wireless ATM network is to specify control functions capable of managing data and signaling connections of moving mobile terminals. The challenge is tough, due to the facts that such control functions neither exist in the current state-of-the-art wireless networks nor are included in the existing ATM specifications and implementations. This article describes the design principles of a wireless ATM signaling stack created in the WAND project. The article identifies some common problems and presents possible solutions to the problems. To justify the feasibility of the ideas presented, some details of a reference implementation, the Wireless ATM Network Demonstrator (WAND) signaling stack, are revealed     

Mobility management in next-generation wireless systems

This paper describes current and proposed protocols for mobility management for public land mobile network (PLMN)-based networks, mobile Internet protocol (IP) wireless asynchronous transfer mode (ATM) and satellite networks. The integration of these networks will be discussed in the context of the next evolutionary step of wireless communication networks. First, a review is provided of location management algorithms for personal communication systems (PCS) implemented over a PLMN network. The latest protocol changes for location registration and handoff are investigated for mobile IP followed by a discussion of proposed protocols for wireless ATM and satellite networks. Finally, an outline of open problems to be addressed by the next generation of wireless network service is discussed     

Wireless ATM networks: technology status and future directions

The concept of “wireless ATM” (WATM), first proposed in 1992, is now being actively considered as a potential framework for new-generation wireless communication networks capable of supporting integrated, quality-of service (QoS) based multimedia services. In this review paper, we outline the technological rationale for wireless ATM, present a system-level architecture, and discuss key design issues for both mobile ATM switching infrastructure and radio access subsystems. The WATM radio access layer issues covered in this paper include: spectrum allocation; spectrum etiquette; modem technology; and medium access/data link control (MAC/DLC) protocols. Mobile ATM aspects such as ATM signaling extensions for handoff control, location management, and mobile QoS control are discussed. A summary of current wireless/mobile ATM technology development and standardization status is given, including an outline of our WATMnet prototype. The paper concludes with a discussion of future directions for wireless ATM technology such as Internet protocol (IP) integration and mobile multimedia terminals/applications     

Signaling alternatives in a wireless ATM network

The world of wireless telecommunications is rapidly changing. The capabilities of wireless networks are improving at a steady pace. This paper presents two possible protocols for implementing mobility for wireless users in an asynchronous transfer mode (ATM) network. The vision of the authors is of one “wireless ATM telecommunications network” that is capable of supporting a variety of today's applications with room to grow for advanced applications of the future. We first visit database architectures that can support mobility in a wireless ATM network. We then discuss one of two signaling architecture alternatives, the “overlay signaling”, for overlay support of mobile users in the ATM-based wireless telecommunications network. “Overlay signaling” aims at minimizing the modification needed to the existing ATM protocols. We then describe a native “migratory signaling” approach that further integrates wireless and wireline users into one global wireless ATM network at the expense of requiring some modifications to the existing ATM protocols. A performance analysis of the proposed signaling architecture alternatives is also presented. We conclude by pointing out some challenges in merging ATM with wireless telecommunications     

QoS routing in ad hoc wireless networks

The emergence of nomadic applications have generated much interest in wireless network infrastructures that support real-time communications. We propose a bandwidth routing protocol for quality-of-service (QoS) support in a multihop mobile network. The QoS routing feature is important for a mobile network to interconnect wired networks with QoS support (e.g., ATM, Internet, etc.). The QoS routing protocol can also work in a stand-alone multihop mobile network for real-time applications. This QoS routing protocol contains end-to-end bandwidth calculation and bandwidth allocation. Under such a routing protocol, the source (or the ATM gateway) is informed of the bandwidth and QoS available to any destination in the mobile network. This knowledge enables the establishment of QoS connections within the mobile network and the efficient support of real-time applications. In addition, it enables more efficient call admission control. In the case of ATM interconnection, the bandwidth information can be used to carry out intelligent handoff between ATM gateways and/or to extend the ATM virtual circuit (VC) service to the mobile network with possible renegotiation of QoS parameters at the gateway. We examine the system performance in various QoS traffic flows and mobility environments via simulation. Simulation results suggest distinct performance advantages of our protocol that calculates the bandwidth information. It is particularly useful in call admission control. Furthermore, “standby” routing enhances the performance in the mobile environment. Simulation experiments show this improvement     

Schemes for mobility management of wireless ATM networks

The growing fields of wireless networks and asynchronous transfer mode (ATM) are merging to form wireless ATM networks. This paper addresses dynamic bandwidth allocation, connection admission procedures, routing, and location management strategies in wireless ATM. More precisely, we investigate the issue of extending the private Network to Network Interface, PNNI, and protocols to support mobility. PNNI‐based hierarchical routing, hand‐off, location management and routing schemes are proposed to integrate wireless capabilities into ATM networks. These schemes provide fast and efficient hand‐off connection processing mechanism and a reduction in the connection disruption time during a connection hand‐off session. They also provide a predictable resource requirement of the mobile system during its connection. During a connection hand‐off, misrouted cells can be re‐routed to their destinations. This substantially reduces the overhead due to end‐to‐end re‐transmissions invoked at higher layers. An analytical model is developed to illustrate the hand‐off algorithm. Copyright © 1999 John Wiley & Sons, Ltd.     

Wireless ATM network architectures

Emulated LAN technology supports mobile hosts in wireless ATM networks. This paper introduces virtual LAN (VLAN) services using ATM LAN emulation technology which operates on a client/server model. One of the attractive features of the VLAN is the capability to group users into a broadcast domain. The focus of this paper is the issue of supporting quality of service to mobiles in a wireless ATM network. Copyright © 2001 John Wiley & Sons, Ltd.     

A wireless broadband ad-hoc ATM local-area network

We describe the theory, design and ongoing prototyping of a wireless ATM LAN/PBX capable of supporting mobile users with multi-Mb/s access rates and multi-Gb/s aggregate capacities. Our proposed LAN Consists of network nodes called Portable Base Stations (PBS) providing microcell coverage. The PBSs are designed to be low-cost, compact and high-speed and can be relocated conveniently. We employ a concept ofad-hoc networking in the layout of the PBS-to-PBS interconnection. That is, the PBSs can be distributed in an arbitrary topology to form a backbone network and can be reconfigured with relative ease. The PBS-to-PBS backbone links are high-speed (Gb/s) for supporting high system capacity. Although they can either be wired or wireless, our emphasis is on wireless implementations. The user-to-PBS links, on the other hand, are primarily for mobile access (e.g., 2–20 Mb/s) and therefore are wireless. Wired connections from stationary users to PBSs are also possible. Typical mobile users are assumed to be laptops or notebook computers. Services supported include conventional data applications (e.g., over TCP/IP or SPX/IPX) as well as multimedia (video, voice and data) applications with QoS (Quality-of-Service) guarantees. A wireless ATM concept is proposed so as to provide seamless internetworking with other wired ATM local and wide-area net-works. Algorithms and control in our network are highly distributed for simple implementations and ease of mobility management. A new wireless VP/VC concept and a Homing Algorithm are described to provide ATM cell routing and connections in the network. PBS hardware and software architectures are discussed. Call management, network management and signaling are designed for simplicity, high performance and modular implementations. A fast network restoration scheme is proposed to cope with the potential link or node failures in the ad-hoc network. Error control is addressed taking the unreliable wireless links into consideration. Finally, a prototyping project called BAHAMA (Broadband Ad Hoc ATM Anywhere) for demonstrating this network concept is briefly outlined.     

平流层通信系统中差错控制技术浅析

分析并给出了平流层通信系统的网络结构模型,指出ATM无线传输技术是平流层通信系统的主要技术.着重分析了ATM无线传输中几种差错控制的方法,并对平流层通信系统中的应用提出了建议.     

无线宽带通信系统及应用

无线通信正处于从窄带传输向宽带传输过渡的发展时期。苯文简单介绍无线局域网、宽带综合数字网、第三代移动通信系统和无线ATM网络几种无线宽带通信系统及其应用。     

Mobile multi-user ATM platforms: architectures, design issues, andchallenges

Rapid growth in use of the Internet at and away from the workplace has spurred tremendous interest in the provision of anytime-anywhere network connectivity to mobile users. Commonly studied mobility scenarios involve users equipped with portable data terminals roaming around at slow to moderate speeds within a coverage area. Mobile IP and wireless ATM are examples of protocols designed for providing network connectivity to such mobiles in IP and ATM networks. A different application involving mobile multi-user platforms (MMUP) equipped with onboard private ATM networks is discussed in this article. Examples of such mobile platforms include airplanes, trains, and ships. The presence of an onboard network, multiple users, and potentially high speed of travel presents unique challenges in provision of internetwork connectivity to these MMUPs. Specific characteristics of MMUPs, architectural issues in design of the underlying cellular network, subnetwork mobility within ATM internetworks, location management of MMUPs, and multi-user connection handoffs on MMUP moves are the main issues addressed in the article. Network architectures and protocols developed for terminal mobility scenarios are evaluated for applicability in the present context, and new solutions are presented for problems unique to the MMUP application scenario     

On architectures for broadband wireless systems

The growing popularity of portable and mobile computing and communication devices, along with the introduction of wireline broadband networks, is fueling demand for wireless broadband networks. Since ATM has been accepted as the standard for broadband integrated service networks, the authors consider the problem of providing “ATM-like services” to mobile devices. The fundamental issues that have to be tackled in order to provide broadband services which are currently available (or will be very shortly) to wireline hosts are discussed. The authors compare and contrast the architectures that have been proposed for extending the broadband wireline network infrastructure to the wireless environment. It is argued that transporting small ATM cells over the air leads to inefficient utilization of the already scarce transmission capacity. Subsequently, the authors propose an architecture for integrated wireless and wireline broadband networks which allows the wireline and wireless parts of the network to be designed independently, therefore allowing each to be optimized for the environment in which it operates. At the same time, the proposed architecture also permits simple and efficient interconnection between the wireline and wireless infrastructures     

第3代移动通信系统的安全技术研究

从无线链路与ATM网络2方面阐述了第3代移动通信系统的安全问题,重点讨论了将安全层置于ATM协议栈中不同位置时所对应的4种方案,并据此提出了一种可行的ATM安全协议结构.     

一种无线ATM网络的MAC协议

主要研究了无线ATM网络对MAC的需求，并介绍了适用于无线ATM的一种新的MAC方案。该协议支持不同类型信息传输，比如恒定比特率（CBR），可变比特率（VBR），可用比特率（ABR），未指定比特率（UBR）。另外此协议还提供了对宽带ATM主干网的无缝连接。同时也支持与ATM相关的QoS级别。对于该协议关注的各种情况的主要原理进行了讨论。     

一种校园范围无线移动交互网的结构

本文提出了一种支持大型大学校园中移动通信的网络结构，设计允许每个移动宿主机在校园中自由漫游时保持传输连接性。设计结合了无线局域网和高速异步转移模式交换技术，提供了一个有处理大量移动宿主同时运动的有充足集合带宽的无线通信系统。     

FUTURE MULTIMEDIA COMMUNICATIONS VIA SATELLITE

We are now moving into an era when conventional speech service will expand to full multimedia service offerings. This paper looks at ways in which satellite systems could provide such services in both the mobile as well as the fixed bands and the integration and inter-operability of such systems. Provision of multimedia services by ATM to integrate with an ATM core network is taken as the basis of the future network. Some of the constraints and difficulties of provision of ATM over satellite are discussed as well as some potential solutions for the ATM wireless protocols and network architectures which potentially could provide such services. Finally, some suggestions of how new orbit constellations could help meet these requirements are given. © 1996 by John Wiley & Sons, Ltd.