Electrochemical properties of Cu2O/Cu composite particles prepared by a novel and facile method

Cu₂O/Cu composite particles were synthesized by a novel and facile chemical reduction method without any template or surfactant. X-ray diffraction (XRD) results showed that the product mainly consisted of the Cu₂O phase coexisting with a few Cu phases. Typical FE-SEM images indicated that the particles with an octahedral shape were Cu₂O. In addition, the electrochemical performance of the Cu₂O/Cu particles as the working electrode material in alkaline solution was systematically investigated. The particles showed a maximum discharge capacity of 222.9 mAh g⁻¹ at a discharge current density of 60 mA g⁻¹ and a high value of 109.1 mAh g⁻¹ after 50 charge–discharge cycles. The results of cyclic voltammetry demonstrated that the reaction between Cu₂O and Cu is the major electrochemical reaction during the charging and discharging process. The results of electrochemical impedance spectroscopy indicated that the formation of Cu₂O on the surface of Cu particles significantly increased the contact resistance and the charge transfer resistance of the electrode during the discharging process.     

A novel capacitive biosensor for cholesterol assay that uses an electropolymerized molecularly imprinted polymer

A novel cholesterol biosensor based on capacitive detection has been developed using molecularly imprinted polymers. The sensitive layer was prepared by electropolymerization of 2-mercaptobenzimidazole (2-MBI) on a gold electrode in the presence of cholesterol as a template. Cyclic voltammetry and capacitive measurements were used to monitor the process of electropolymerization. Surface uncovered areas were plugged with 1-dodecanethiol to make the layer dense, and the insulating properties of the layer were studied in the presence of K₃Fe(CN)₆/K₄Fe(CN)₆ redox couples and also by the use of AC impedance measurements. The template molecules and the non-bound thiol were removed from the modified electrode surface by washing with an alkaline solution of ethanol. The sensor's linear response range was between 5 and 30 μM, with a detection limit of 0.42 μM. The proposed molecularly imprinted polymer capacitive (MIPC) sensor exhibited good selectivity for cholesterol. The reproducibility and repeatability of the MIPC senor were all found to be satisfactory. The results from sample analysis confirmed the applicability of the MIPC sensor to quantitative analysis.     

Studies of a novel conducting polymer by cyclic and square wave voltammetries: Its synthesis and characterization

A novel conducting polymer of polynaphthidine, poly(NAP), was synthesized electrochemically by direct anodic oxidation of naphthidine in aqueous media. The yield of the electropolymerization reaction depends on the temperature and pH of the solution. It was possible to differentiate two working regions: I (for pH < 0.5 and all temperatures) where the film yield tends to zero and II (for approximately 2.0 < pH < 2.8 and temperatures >15 °C) where the film production is maximum. Therefore, the naphthidine electrooxidation mechanism was studied under experimental conditions of region I by cyclic (CV) and square wave voltammetries (SWV) as well as by controlled potential electrolysis.The experimental conditions of region II were chosen to obtain the poly(NAP). The electrochemical response of the film was investigated in pH 1 HClO₄ + 0.1 M NaClO₄ electrolyte solution by CV and SWV. A plot of I_p,n/fvs. f from SW voltammograms showed the so-called “quasi-reversible maximum”. Formal potential, formal rate constant and anodic transfer coefficient for the surface redox process were also evaluated from the SWV.The poly(NAP) is insoluble in common organic solvents and shows electrochromic behaviour. Its probable structure was determined by FTIR spectroscopy.     

Characterization of polymeric film of a new manganese phthalocyanine complex octa-substituted with 2-diethylaminoethanethiol, and its use for the electrochemical detection of bentazon

Manganese acetate octakis-(2-diethyaminoethanethiol) phthalocyanine (AcMnODEAETPc) was newly synthesized and characterized by spectroscopic and electrochemical methods. Solution electrochemistry of the complex showed three redox processes assigned to Mn^IIIPc⁻¹/Mn^IIIPc⁻², Mn^IIIPc⁻²/Mn^IIPc⁻² and Mn^IIPc⁻²/Mn^IIPc⁻³ species. The new molecule was polymerized onto a glassy carbon electrode (GCE) to form thin films of different thickness, giving poly-10-AcMnODEAETPc-GCE, poly-20-AcMnODEAETPc-GCE and poly-30-AcMnODEAETPc-GCE, where 10, 20 and 30 represent the number of voltammetry scans during polymerization. Three distinct redox processes were observed on the modified electrode in 0.1 M phosphate buffer solution, pH 5, which confirmed the formation of the polymer. The current signal due to the herbicide, bentazon, was dependent on film thickness; the best signal was obtained on poly-20-AcMnODEAETPc-GCE while poly-10-AcMnODEAETPc-GCE gave the least signal. However, the signals due to the herbicide were better on the different films compared to the bare electrode. Electrochemical impedance spectroscopy (EIS) technique revealed that differences in film thickness offered different charge transfer resistances, R_ct, hence difference in current signals for bentazon oxidation were observed on these films. A Tafel slope of 77 mV/decade, obtained for the herbicide on poly-20-AcMnODEAETPc-GCE, denotes a fast one electron transfer followed by a slow chemical step in the electro-oxidation of bentazon. The voltammetry signals of the herbicide on the films indicated the likely involvement of ring-based redox processes in the detection of the herbicide. A plot of background corrected current response, on this film, versus the concentration of bentazon was linear within the range 50–750 μM with a detection limit of 2.48 × 10⁻⁷ M.     

Polyaniline fibres as electrodes.: Electrochemical characterisation in acid solutions

Polyaniline fibre microelectrodes prepared from a doped solution of polyaniline protonated with 2-acrylamido-2-methyl-1-propanesulphonic acid in dichloracetic acid were characterized electrochemically for the first time. Low scan rate cyclic voltammetry was used for characterisation in different acid electrolyte solutions, hydrochloric, nitric, perchloric, sulphuric and phosphoric, at low pH values with varying positive potential limits. Electrochemical impedance spectroscopy was also utilised. The electrochemical behaviour of polyaniline (PANI) fibres was found to be similar to that of PANI films obtained by electropolymerisation on metallic electrode substrates. The conduction potential window was found to be from +0.20 to +0.60 V versus SCE, with small variations in the different acid solutions as well as with pH. The standard electrochemical redox couple hexacyanoferrate(III), was found to behave quasi-reversibly in the conduction potential region and rate constants were evaluated.     

Electrochemical properties of benzylmercapto and dodecylmercapto tetra substituted nickel phthalocyanine complexes: Electrocatalytic oxidation of nitrite

Nickel tetrakis(benzylmercapto)phthalocyanine (NiTBMPc) and nickel tetrakis(dodecylmercapto)phthalocyanine (NiTDMPc) complexes were synthesized and their spectral and electrochemical properties reported. The CV showed four or five redox processes for NiTBMPc and NiTDMPc, respectively. For the first time, spectroelectrochemistry gave evidence for the formation of Ni^II/Ni^I process in a NiPc complex. The rest of the processes were ring based. The NiTBMPc complex was successfully deposited on both gold and glassy carbon electrodes by electropolymerisation while NiTDMPc complex was deposited on gold electrode only. The films were electro-transformed in aqueous 0.1 M NaOH solution to the O–Ni–O oxo bridged form. The modified electrodes were characterized using electrochemical impedance spectroscopy and the results showed typical behavior for modified electrodes. Electrodes with poly-Ni(OH)Pcs films exhibited higher charge transfer resistance values, R_p than their corresponding poly-NiPcs films counterparts. All the modified electrodes showed improved catalytic activities than the unmodified electrodes towards nitrite ions electrooxidation. Better catalytic activities were observed for the modified electrodes when they were transformed to O–Ni–O oxo bridge form. All the modified electrodes exhibited high resistance to electrode surface passivation.     

Electrochemical evaluation of avidin-biotin interaction on self-assembled gold electrodes

The avidin-biotin interaction on 11-mercaptoundecanoic acid self-assembled gold electrodes was investigated by means of cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The interfacial properties of the modified electrodes were evaluated in the presence of the Fe(CN)₆^3−/4− couple redox as a probe. A simple equivalent circuit model with a constant phase element was used to interpret the obtained impedance spectra. The results of cyclic voltammetry showed that the voltammetric behavior of the redox probe was influenced by the electrode surface modification. It is evident that the accumulation of treated substances and the binding of biotin to avidin on the electrode surface resulted in the increasing electron-transfer resistance and the decreasing capacitance. The changes in the electron-transfer resistance on the avidin-modified electrodes were more sensitive than that in the capacitance while detecting biotin over the 2-10 μg/mL concentration. The detection amount can be as low as 20 ng/mL based on the electron-transfer resistance that presented the change of 4.3 kΩ without the use of labels. The development of a rapid, facile, and sensitive method for the quantitation of nanogram quantities of biomolecules utilizing EIS may be achieved.     

Physical and electrochemical characterization of CdS hollow microspheres prepared by a novel template free solution phase method

Novel CdS hollow microspheres have been successfully synthesized via a facile template-free solution-phase reaction from cadmium nitrate and thioacetamide precursors. The morphology of CdS hollow microspheres depends strongly on the ratio between the precursors, cadmium nitrate to thioacetamide ratio. The physical properties of the hollow microspheres have systematically been studied by different characterization methods. The stoichiometry of the hollow microspheres studied by the energy dispersive X-ray diffraction spectroscopy confirmed that the synthesized CdS hollow microspheres are nearly stoichiometric bulk like CdS. The morphology of the hollow microspheres studied by high resolution scanning electron microscopy and transmission electron microscopy observations showed that the CdS hollow microspheres of the size of 2.5 μm have hollow structure and are constructed by several nanoparticles of the size between 30 and 40 nm. The UV-visible diffuse reflectance spectroscopy studies showed that the band gap of the CdS hollow microspheres increased while increasing the cadmium nitrate to thioacetamide ratio. Further electrochemical characterization of CdS hollow microspheres was performed with glassy carbon electrode (GCE) after its chemical modification by CdS dispersed in dimethylformamide. The electrochemical studies showed that with decreasing the band gap energy the electron transfer resistance of CdS/GCE was also found decreased. Moreover, electrochemical impedance spectroscopic measurements showed enhanced DNA adsorption onto CdS/GCE in comparison to GCE. These experiments demonstrate that the CdS hollow microspheres act as an efficient electrode modifier that effectively decreased the charge transfer resistance and capacitance of the modified sensors, which can be used for electroanalytical purposes.     

Electrochemical copolymerization of benzothiophene with thiophene

Copolymerization of benzothiophene (BTh) with thiophene (Th) was successfully achieved electrochemically by potentiodynamic methods. BTh and Th were also both copolymerized separately with pyrrole (Py) for comparison. The electrochemical properties of copolymers obtained at different monomer concentrations, scan rates and scan numbers were characterized by voltametric, electrochemical impedance spectroscopy (EIS), ATR-FTIR, spectroelectrochemical and conductivity measurements. Results suggested that optical band gaps and oxidation potentials can be decreased by copolymerization and this advantage makes copolymers suitable for electrochromic and photovoltaic applications. Conductivity of copolymers generally lies in between that of homopolymers and specific capacitance value of BTh could be raised from 18.9 mF/cm² to 138.3 mF/cm² by copolymerization with Py. A proper mechanism for copolymerization was suggested.     

Electrochemical copolymerization of thiophene derivatives; a precursor to photovoltaic devices

This work presents an electrochemical technique for the polymerization and copolymerization of thiophene derivatives like 7,9-dithiophene-2yl-8H-cyclopenta[a]acenaphthalene-8-one and 3-hexylthiophene. The structural characterization of chemically synthesized monomers and electrochemically synthesized polymers was carried out by nuclear magnetic resonance and Fourier transform infrared spectroscopy. Thermal characterizations indicate that copolymer has increased thermal stability than that of homopolymer. Morphological studies of the polymerized films carried out by scanning electron microscopy shows network structure of copolymer. Optical properties of the homopolymers and copolymer were studied by UV–visible spectrometer and it was observed that band gap of copolymer is less than the homopolymers. HOMO and LUMO levels, band gap values of the respective polymers were also calculated from the cyclic voltammetry technique with various scan rates. By the peak current obtained from various scan rates shows that all polymerization reactions are diffusion controlled process. Charge transfer resistances of polymers were determined using Nyquist plots. Conductivity of synthesized polymers shows higher conductivity for copolymer than homopolymers.     

Comparative electrochemical study of self-assembled monolayers of 2-mercaptobenzoxazole, 2-mercaptobenzothiazole, and 2-mercaptobenzimidazole formed on polycrystalline gold electrode

Comparative electrochemical behavior of self-assembled monolayers (SAMs) of three heteroaromatic thiols, 2-mercaptobenzoxazole (MBO), 2-mercaptobenzothiazole (MBT), and 2-mercaptobenzimidazole (MBI) are investigated by means of cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The electrochemical characteristics of the electrode/solution interface are considerably and differently affected by thiols constructing the SAMs. The consumed charges for reductive desorption of SAMs, which is criterion for the amount of chemically adsorbed thiol, are significantly different for these three SAMs, specially for MBT, implying that SAM of MBT is formed through both sulfur atoms; the thiol sulfur and skeleton sulfur of the thiazole ring. Desorption potentials of the SAMs have shown the following order for strength of gold-sulfur bond: MBT > MBO > MBI. Activity of the three SAMs as pH-sensitive interfaces was also investigated and their surface-pK_a values derived from the EIS measurements showed this order for acidic strength of SAMs: MBO > MBT > MBI. This is the same order expected due to the difference in electronegativity of the O, S, and N heteroatoms, and confirms that the most electron-rich ring imidazole is attached to the benzene ring of MBI. A comparison of the interfacial charge transfer resistance variation as a function of gold immersion time in thiols solution reveals that kinetics of Au-MBT assembly is different from those of two others and confirms formation of Au-MBT SAM via both sulfur atoms of MBT.     

Electrochemical behavior of K<Subscript>4</Subscript>Fe(CN)<Subscript>6</Subscript> in [bmim]PF<Subscript>6</Subscript>/TX-100/H<Subscript>2</Subscript>O based microemulsions

The electrochemical behavior of potassium ferrocyanide [K₄Fe(CN)₆] at Pt/ionic liquid (IL) microemulsion interfaces was investigated by cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). H₂O/TX-100/bmimPF₆ was used to prepare three IL microemulsions: water in 1-butyl-3-methylimidazolium hexafluorophosphate (bmimPF₆) (W/IL), bicontinuous (WIL) and bmimPF₆ in water (IL/W). The results show that the IL microemulsion systems have relatively narrower potential windows compared with the pure IL system. The redox potential gap is about 100 mV in the pure water and the three IL microemulsions. The redox potentials of K₄Fe(CN)₆/K₃Fe(CN)₆ and the redox peak currents decrease in the order pure water, IL/W, WIL, W/IL. Furthermore, the peak currents increase linearly with the square root of the scan rate, while the diffusion coefficient increased in the order W/IL, WIL, IL/W. The Nyquist plots obtained in the WIL and IL/W systems show capacitive resistance arcs at high frequencies and 45° straight lines at low frequencies, implying that the electrochemical reactions are controlled by charge transfer and diffusion steps. For the W/IL system there is only a 45° straight line in the Nyquist plot, indicating that diffusion is the controlling step at all frequencies.     

Electrochemical characterization of a 1,8-octanedithiol self-assembled monolayer (ODT-SAM) on a Au(1 1 1) single crystal electrode

Recently, it has becoming increasingly important to control the organization of self-assembled monolayers (SAMs) of ω-functionalized thiols for its potential applications in the construction of more complex molecular architectures. In this paper, we report on the spontaneous formation of a SAM of octanedithiol (ODT) as a function of the modification time. Electrochemical techniques such as cyclic voltammetry, double layer capacitance and electrochemical impedance spectroscopy are used for the characterization of this monolayer. The increase in modification time brings about changes in the octanedithiol self-assembled monolayer (ODT-SAM) reductive desorption voltammograms that indicate an evolution toward a more ordered and compact monolayer. This trend has also been found by following the changes in the electron transfer processes of the redox probe K₃Fe(CN)₆. In fact, the ODT-SAM formed at low-modification time does not significantly perturb the electrochemical response as it is typical of either a low coverage or of the presence of large defects in the layer. Upon increasing the modification time, the voltammograms of the redox probe adopt a sigmoidal shape indicating the existence of pinholes in the monolayer distributed as an array of microelectrodes. The surface coverage as well as the size and distribution of these pinholes have been determined by the impedance technique that gives a more reliable evaluation of these monolayer structural parameters.     

聚丙烯胺二茂铁电化学特性的研究

在水溶性高分子聚丙烯胺(PAA)的骨架上引入电化学活性二茂铁(Fc)基团,合成了具有电化学活性的水溶性高分子聚丙烯胺二茂铁(PAA-Fc).采用紫外和红外吸收光谱对PAA-Fc进行了表征,并利用循环伏安法研究了其电化学特性.实验结果表明:PAA-Fc具有明显的电化学活性,可在L-脯氨酸脱氢酶与电极表面之间实现电子传递.     

Electrochemical studies on the redox mechanism of uranium chloride in molten LiCl-KCl eutectic

The reduction and oxidation processes on platinum and glassy carbon electrodes in molten LiCl-KCl eutectic containing UCl₃ were investigated by cyclic voltammetry (CV), chronopotentiometry and electrochemical impedance spectroscopy (EIS) in the temperature range 660-780 K. Two redox peaks have been observed in the cyclic voltammograms corresponding to the two redox reactions U(IV)/U(III) and U(III)/U which are found to be reversible and quasi-reversible, respectively. The reduction potentials of U(IV)/U(III) and U(III)/U are −0.325 and −1.490 V versus reference electrode (0.1 mol% AgCl in the LiCl-KCl), respectively at 700 K. Chronopotentiometric measurements confirm the three-electron transfer during the reduction of U(III) to U metal. Electrochemical impedance spectroscopy data at various potentials were interpreted either as diffusion, adsorption or reduction process by nonlinear fit of the impedance data to the simulated equivalent circuits.     

Effect of electrolyte on the supercapacitive behaviour of copper oxide/reduced graphene oxide nanocomposite

Cupric oxide/reduced graphene oxide (CuO/rGO) nanocomposites were synthesized through a chemical reduction method using hydrazine hydrate as the reducing agent. The morphology, elemental composition, and bonding network of the CuO/rGOnanocomposites were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS) and Raman spectroscopy respectively. The XRD results reveal lattice spacing and lattice strain from 3.371 to 3.428 Å and 1.05 × 10⁻³to 5.44 × 10⁻³ respectively, with the increasing ratio of rGO: CuO from 1:1 to 1:5. The cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS)and galvanostatic charge-discharge (GCD) studyofCuO/rGOas the electrode material showed excellent super-capacitive behavior in H₂SO₄ over Na₂SO₄ electrolytes. Moreover CuO/rGO nanocomposites exhibited better capacitance retention in H₂SO₄(75.69%) compared to Na₂SO₄(12.06%).     

Optimization of electrochemical polymerization parameters of polypyrrole on Mg–Al alloy (AZ91D) electrodes and corrosion performance

We report on the optimum electropolymerization conditions of polypyrrole (PPy) coatings on Mg alloy AZ91D electrodes from aqueous electrolytes of sodium salicylate via cyclic voltammetry (CV). Results show that initial and end potential values during the electrochemical coating procedure play an important role on the adhesion and corrosion performance of PPy films. Corrosion tests of AZ91D electrodes coated with PPy under optimized conditions show a good corrosion performance during 10 days in Na₂SO_4, without peeling off of these thin films.     

Synthesis, characterization polymerization and antibacterial properties of novel thiophene substituted acrylamide

Ethyl 2-acrylamido-4,5,6,7-tetrahydrobenzo [b] thiophene-3-carboxylate (ETTCA) has been synthesized and its structure has been elucidated by elemental analysis and spectral tools. Free radical polymerization of (ETTCA) has been conducted in several solvents using azobisisobutyronitrile (AIBN) as an initiator. The kinetic parameters of polymerization of the ETTCA were investigated, and it was found that the polymerization reaction follows the conventional free radical scheme. The overall activation energy of polymerization ΔE was determined (ΔE = 45.11 kJ mol⁻¹). The copolymerization of ETTCA with three conventional monomers was carried out in dioxane at 65 °C. The monomer reactivity ratios for the copolymerization of ETTCA with methyl methacrylate (MMA), vinyl acetate (VA) and vinyl ether (VE) were calculated. Thermal stability of the ETTCA polymer and its copolymers were investigated by thermogravimetric analysis. It has been found that the prepared polymer (PETTCA) and its copolymers with VA have moderate biological activity and highly dependent on the copolymer composition.     

Electrochemical synthesis and properties of polybenzoxazine

A new kind of polybenzoxazine, poly(3-(p-methyl) benzyl-3,4-dihydro-6-methyl-2H-1,3-benzoxazine), has been synthesized by an electrochemical method in acetonitrile/alkali aqueous solution. The obtained film shows good heat resistance properties. The structure of the obtained film is characterized using Fourier Transform Infrared (FTIR) spectroscopy.     

Electrochemical supercapacitor material based on manganese oxide: preparation and characterization

A novel class of electrochemical supercapacitor electrode material has been electrochemically synthesized from a manganese halide complex in water-containing acetonitrile electrolyte at room temperature. This material has been physically and chemically characterized by scanning electron microscopy, X-ray photoelectron microscopy (XPS), FT-Raman microscopy and cyclic voltammetry. XPS and FT-Raman characterization suggest that this material is composed of manganese oxide with a chemical composition of Mn₃O₄ and containing a moderate amount of carbon. Cyclic voltammetric characterization indicates that this material has higher electronic conductivity than usually seen for manganese oxide and that it shows fast kinetics for the charge-discharge process in both aqueous and acetonitrile electrolytes. The material provides a large pseudocapacitance over a potential window of about 1 V in aqueous electrolyte and about 2 V in acetonitrile electrolyte. It is therefore a good candidate as a material for an electrochemical supercapacitor electrode.