Volatilisation and catalytic effects of alkali and alkaline earth metallic species during the pyrolysis and gasification of Victorian brown coal. Part VII. Raman spectroscopic study on the changes in char structure during the catalytic gasification in air

FT-IR/Raman spectroscopies have been used to identify the structural features of Victorian brown coal chars during the gasification in air at 400 °C. The deconvolution of the Raman spectra has allowed us to identify the main structural sites in char where preferential reaction with O₂ takes place. The presence of Na and Ca catalysts is shown to alter the reaction pathways between char and O₂. In the absence of a catalyst, the O-containing functional groups formed in char during gasification were closely associated with the aromatic structure and thus tended to loosen the aromatic structure. The non-catalysed gasification was slow and took place on some specific (especially sp³-rich or sp²–sp³ mixture) sites distributed throughout the char. In the presence of a catalyst (Na or Ca), the O-containing functional groups were not closely associated with the main aromatic structure throughout the char. The catalytic gasification reactions were localised on the sites associated with the catalysts. The preferential removal of smaller aromatic ring systems and the persistence of cross-linking structures in the presence of a catalyst mean that the large aromatic ring systems were increasingly concentrated with little flexibility, affecting the dispersion of catalyst.     

Catalytic steam gasification of Yallourn coal using sodium hydridotetracarbonyl ferrate

Catalytic steam gasification of Yallourn coal using sodium hydridotetracarbonyl ferrate was carried out in a semi-flow-type fixed-bed reactor at 873 and 973 K at atmospheric and high pressures. With Na[HFe(CO)₄] (Fe 1.67 wt%, Na 0.68 wt%), the steam gasification of the coal was more highly promoted than with Na₂CO₃ (Na 2.17%) and the coal was almost completely burnt out. The gasification rate decreased with increasing carbon burnoff with or without catalyst at 873 K, but increased in the presence of the catalyst at 973 K. Under pressurized steam (0.4 MPa), the catalyst exhibited higher activity. The char, obtained from Yallourn coal under argon at 823 K for 2 h, gasified under steam partial pressures of 0.4 and 0.8 MPa behaved the same as the original coal and no increase in gasification rate with steam pressure was observed. X-ray diffraction analysis showed that Na[HFe(CO)₄] was converted to Fe₃O₄ and Na₂CO₃ during the reaction.     

Catalytic gasification of char from co-pyrolysis of coal and biomass

The catalytic gasification of char from co-pyrolysis of coal and wheat straw was studied. Alkali metal salts, especially potassium salts, are considered as effective catalysts for carbon gasification by steam and CO₂, while too expensive for industry application. The herbaceous type of biomass, which has a high content of potassium, may be used as an inexpensive source of catalyst by co-processing with coal. The reactivity of chars from co-pyrolysis of coal and straw was experimentally examined. The chars were prepared in a spout-entrained reactor with different ratios of coal to straw. The gasification characteristics of chars were measured by thermogravimetric analysis (TGA). The co-pyrolysis chars revealed higher gasification reactivity than that of char from coal, especially at high level of carbon conversion. The influence of the alkali in the char and the pyrolysis temperature on the reactivity of co-pyrolysis char was investigated. The experimental results show that the co-pyrolysis char prepared at 750 °C have the highest alkali concentration and reactivity.     

Changes in char reactivity and structure during the gasification of a Victorian brown coal: Comparison between gasification in O2 and CO2

Char reactivity is an important factor influencing the efficiency of a gasification process. As a low-rank fuel, Victorian brown coal with high gasification reactivity is especially suitable for use with gasification-based technologies. In this study, a Victorian brown coal was gasified at 800 °C in a fluidised-bed/fixed-bed reactor. Two different gasifying agents were used, which were 4000 ppm O₂ balanced with argon and pure CO₂. The chars produced at different gasification conversion levels were further analysed with a thermogravimetric analyser (TGA) at 400 °C in air for their reactivities. The structural features of these chars were also characterised with FT-Raman/IR spectroscopy. The contents of alkali and alkaline earth metallic species in these chars were quantified. The reactivities of the chars prepared from the gasification in pure CO₂ at 800 °C were of a much higher magnitude than those obtained for the chars prepared from the gasification in 4000 ppm O₂ also at 800 °C. Even though both atmospheres (i.e. 4000 ppm O₂ and pure CO₂) are oxidising conditions, the results indicate that the reaction mechanisms for the gasification of brown coal char at 800 °C in these two gasifying atmospheres are different. FT-Raman/IR results showed that the char structure has been changed drastically during the gasification process.     

Effect of pressure on gasification reactivity of three Chinese coals with different ranks

The gasification reactivities of three kinds of different coal ranks (Huolinhe lignite, Shenmu bituminous coal, and Jincheng anthracite) with CO₂ and H₂O was carried out on a self-made pressurized fixed-bed reactor at increased pressures (up to 1.0 MPa). The physicochemical characteristics of the chars at various levels of carbon conversion were studied via scanning electron microscopy (SEM), X-ray diffraction (XRD), and BET surface area. Results show that the char gasification reactivity increases with increasing partial pressure. The gasification reaction is controlled by pore diffusion, the rate decreases with increasing total system pressure, and under chemical kinetic control there is no pressure dependence. In general, gasification rates decrease for coals of progressively higher rank. The experimental results could be well described by the shrinking core model for three chars during steam and CO₂ gasification. The values of reaction order n with steam were 0.49, 0.46, 0.43, respectively. Meanwhile, the values of reaction order n with CO₂ were 0.31, 0.28, 0.26, respectively. With the coal rank increasing, the pressure order m is higher, the activation energies increase slightly with steam, and the activation energy with CO₂ increases noticeably. As the carbon conversion increases, the degree of graphitization is enhanced. The surface area of the gasified char increases rapidly with the progress of gasification and peaks at about 40% of char gasification.     

CFD-DPM-based numerical simulation for char gasification in an entrained flow reactor: Effect of residence time distribution

The rate of conversion during gasification of char particles depends on the type of reagents, the concentration of reactants, and reactor temperature, among many other parameters; however, the overall conversion depends on the residence time distribution (RTD) of the particles in the reactor. The objective of the present work is to investigate the influence of gasifying agents, their concentration, and reactor wall temperature on the RTD of the char particles. The aim also includes studying the effect of mean residence time on the overall char conversion during gasification of Victorian brown coal in an entrained flow reactor. Two gasifying reagents, namely, CO₂ and H₂O, are selected in the present study. A discrete particle model (DPM) is coupled with computational fluid dynamics (CFD) to simulate the solid phase dynamics. Gasification is modelled using a lumped approach. The mean residence time of the solid char particles, determined using three different methods, is observed to increase with the CO₂ concentration and wall temperature but decrease in the H₂O environment. The longer residence time leads to higher overall char conversion in a CO₂ environment despite the higher reactivity of H₂O compared to CO₂ as a gasifying reagent.     

Volatilisation and catalytic effects of alkali and alkaline earth metallic species during the pyrolysis and gasification of Victorian brown coal. Part IX. Effects of volatile-char interactions on char-H2O and char-O2 reactivities

Volatile-char interactions are an important consideration in the design and operation of a gasifier. This study aims to investigate the effects of volatile-char interactions on the in situ char-steam reactivity at 800 °C and the ex-situ char-O₂ reactivity at 400 °C. A Victorian brown coal was gasified in 15% steam at 800 °C in a one-stage novel fluidised-bed/fixed-bed quartz reactor, in which the extent of volatile-char interactions could be controlled. The chars after varying extents of volatile-char interactions and/or varying extents of char conversion in steam were also collected for the measurement of their reactivity with air at 400 °C in a thermogravimetric analyser. Our results show that the char-steam gasification reactions were greatly inhibited by the volatile-char interactions. It is believed that the H radicals generated from the thermal cracking/reforming of volatiles slowed the char gasification in three ways: occupying the char reactive sites, causing the char structure to re-arrange/condense and enhancing the release of catalytic species inherently present in the brown coal. The importance of volatile-char interactions to char-steam reactivity was further confirmed by the char-air reactivity.     

Modeling of catalytic gasification kinetics of coal char and carbon

Calcium- and potassium-catalyzed gasification reactions of coal char and carbon by CO₂ are conducted, and the common theoretical kinetic models for gas-carbon (or char) reaction are reviewed. The obtained experimental reactivities as a function of conversion are compared with those calculated based on the random pore model (RPM), and great deviations are found at low or high conversion levels as predicted by theory. Namely, calcium-catalyzed gasification shows enhanced reactivity at low conversion levels of <0.4, whereas potassium-catalyzed gasification indicated a peculiarity that the reactivity increases with conversion. CO₂ chemisorption analysis received satisfactory successes in both interpreting catalytic effects and correlating the gasification reactivity with irreversible CO₂ chemical uptakes (CCU_ir) of char and carbon at 300 °C. In details, calcium and potassium additions led to significant increases in CCU_ir and correspondent high reactivities of the char and carbon. Furthermore, CCU_ir of char and carbon decreased with conversion for calcium-catalyzed reaction but increased for potassium-catalyzed one, corresponded to the tendency of their reactivity. The RPM is extended and applied to these catalytic gasification systems. It is found that the extended RPM predicts the experimental reactivity satisfactorily. The most important finding of this paper is that the empirical constants in the extended RPM correlate well with catalyst loadings on coal.     

Intrinsic char reactivity of plastic waste (PET) during CO2 gasification

Char reactivity has a strong influence on the gasification process, since char gasification is the slowest step in the process. A sample of waste PET was devolatilised in a vertical quartz reactor and the resulting char was partially gasified under a CO₂ atmosphere at 925 °C in order to obtain samples with different degrees of conversion. The reactivity of the char in CO₂ was determined by isothermal thermogravimetric analysis at different temperatures in a kinetically controlled regime and its reactive behaviour was evaluated by means of the random pore model (RPM). The texture of the char was characterised by means of N₂ and CO₂ adsorption isotherms. The results did not reveal any variation in char reactivity during conversion, whereas the micropore surface area was affected during the gasification process. It was found that the intrinsic reaction rate of the char can be satisfactorily calculated by normalizing the reaction rate by the narrow micropore surface area calculated from the CO₂ adsorption isotherms. It can be concluded therefore that the surface area available for the gasification process is the area corresponding to the narrow microporosity.     

Volatilisation and catalytic effects of alkali and alkaline earth metallic species during the pyrolysis and gasification of Victorian brown coal. Part IV. Catalytic effects of NaCl and ion-exchangeable Na in coal on char reactivity

The purpose of this study is to investigate the catalytic effects of Na as NaCl or as sodium carboxylates (-COONa) in Victorian brown coal on the char reactivity. A Na-exchanged coal and a set of NaCl-loaded coal samples prepared from a Loy Yang brown coal were pyrolysed in a fluidised-bed/fixed-bed reactor and in a thermogravimetric analyser (TGA). The reactivities of the chars were measured in air at 400 °C using the TGA. The experimental data indicate that the Na in coal as NaCl and as sodium carboxylates (-COONa) had very different catalytic effects on the char reactivity. It is the chemical form and dispersion of Na in char, not in coal, that govern the catalytic effects of Na. For the Na-form (Na-exchanged) coal, the char reactivity increased with increasing pyrolysis temperature from 500 to 700 °C and then decreased with pyrolysis temperature from 700 to 900 °C. The increase in reactivity with pyrolysis temperature (500-700 °C) is mainly due to the changes in the relative distribution of Na in the char matrix and on the pore surface. For the NaCl-loaded coals, when Cl was released during pyrolysis or gasification, the Na originally present in coal as NaCl showed good catalytic effects for the char gasification. Otherwise, Cl would combine with Na in the char to form NaCl during gasification, preventing Na from becoming an active catalyst. Controlling the pyrolysis conditions to favour the release of Cl can be a promising way to transform NaCl in coal into an active catalyst for char gasification.     

Effect of iron on the gasification of Victorian brown coal with steam:enhancement of hydrogen production

This paper reports the significant enhancement of hydrogen production during the gasification of Victorian brown coal with steam using iron as a catalyst. Iron was loaded into the acid-washed Loy Yang brown coal using ferric chloride aqueous solution. Gasification experiments were carried out using a quartz reactor at a fast particle heating rate. The yield of char was determined by directly weighing the reactor before and after each experiment. Gases were analysed using a GC with dual columns. The overall gasification rate of a char increases greatly in the presence of iron. The transformation of iron species during pyrolysis and gasification was examined using X-ray diffraction (XRD) and scanning electron microscopy (SEM). The results show that both reduced-iron (α-Fe and γ-Fe) and magnetite (Fe₃O₄) highly dispersed in a char can catalyse the gasification of the char with steam. In particular, the char from iron-loaded coal samples gives much higher yields of H₂ than a char from the acid-washed coal under similar conditions. The mechanism for the enhancement of hydrogen production in the presence of iron is discussed.     

NH3 and HCN formation during the gasification of three rank-ordered coals in steam and oxygen

A Victorian brown coal (68.5% C), a Chinese high-volatile Shenmu bituminous coal (82.3% C) and a Chinese low-volatile Dongshan bituminous coal (90% C) were gasified in a fluidised-bed/fixed-bed reactor at 800 °C in atmospheres containing 15% H₂O, 2000 ppm O₂ or 15% H₂O + 2000 ppm O₂. While the gasification of these coals in 2000 ppm O₂ converted less than 27% of coal-N into NH₃, the introduction of steam played a vital role in converting a large proportion of coal-N into NH₃ by providing H on char surface. The importance of the roles of steam in the formation of NH₃ in atmospheres containing 15% H₂O + 2000 ppm O₂ decreased with increasing coal rank. This is largely due to the slow gasification of high-rank coal chars, resulting in low availability of H on char surface. The gasification of chars from the high-rank coal appears to produce higher yields of HCN than that of lower rank coals, probably as a result of the decomposition of partially hydrogenated/broken/activated char-N structures during gasification at high temperature. The alkali and alkaline earth metallic species in brown coal tend to favour the release of coal-N as tar-N but have limited effects on char-N conversion during gasification.     

The effect of steam on pyrolysis and char reactions behavior during rice straw gasification

Steam gasification of biomass can generate hydrogen-rich, medium heating value gas. We investigated pyrolysis and char reaction behavior during biomass gasification in detail to clarify the effect of steam presence. Rice straw was gasified in a laboratory scale, batch-type gasification reactor. Time-series data for the yields and compositions of gas, tar and char were examined under inert and steam atmosphere at the temperature range of 873-1173 K. Obtained experimental results were categorized into those of pyrolysis stage and char reaction stage. At the pyrolysis stage, low H₂, CO and aromatic tar yields were observed under steam atmosphere while total tar yield increased by steam. This result can be interpreted as the dominant, but incomplete steam reforming reactions of primary tar under steam atmosphere. During the char reaction stage, only H₂ and CO₂ were detected, which were originated from carbonization of char and char gasification with steam (C + H₂O→CO + H₂). It implies the catalytic effect of char on the water-gas shift reaction. Acceleration of char carbonization by steam was implied by faster hydrogen loss from solid residue.     

铁基复合载氧体煤化学链气化反应特性及机理

以水蒸气作为气化/流化介质,在流化床中研究了两种铁基复合载氧体的化学链气化反应特性及循环特性,并对气化过程中的反应机理、动力学方程进行了推断。结果表明:温度为920℃时,添加不同修饰物的铁基复合载氧体与煤焦气化的反应活性依次为Fe4Al6K1>Fe4Al6>Fe4Al6Ni1。在多次循环实验过程中,合成气成分保持稳定,表明Fe4Al6K1复合载氧体循环特性良好。XRD谱图分析表明,六次氧化还原实验后的铁基载氧体氧化态仍为Fe₂O₃。K⁺主要以铁酸钾形态存在,该结构有利于促进化学链气化反应。利用高斯函数对气化反应速率进行了峰拟合,拟合结果表明化学链气化主要分为3个阶段:化学链作用阶段、煤气化阶段以及Fe₃O₄向FeO转变的气化阶段。     

The effect of coal particle size on pyrolysis and steam gasification

For future power generation from coal, one preferred option in the UK is the air-blown gasification cycle (ABGC). In this system coal particles sized up to 3 mm, perhaps up to 6 mm in a commercial plant, are pyrolysed and then gasified in air/steam in a spouted bed reactor. As this range of coal particle sizes is large it is of interest to investigate the importance of particle size for those two processes. In particular the relation between the coal and the char particle size distribution was investigated to assess the error involved in assuming the coal size distribution at the on-set of gasification. Different coal size fractions underwent different changes on pyrolysis. Smaller coal particles were more likely to produce char particles larger than themselves, larger coal particles had a greater tendency to fragment. However, for the sizes investigated in this study ranging from 0.5 to 2.8 mm, the pyrolysis and gasification behaviour was found not to vary significantly with particle size. The coal size fractions showed similar char yields, irrespective of the different char size distributions resulting from pyrolysis. Testing the reactivity of the chars in air and CO₂ did not reveal significant differences between size fractions of the char, nor did partial gasification in steam in the spouted bed reactor. From the work undertaken, it can be concluded that pyrolysis and gasification within the range of particle sizes investigated are relatively insensitive to particle size.     

Formation of NOx precursors during the pyrolysis of coal and biomass. Part VIII. Effects of pressure on the formation of NH3 and HCN during the pyrolysis and gasification of Victorian brown coal in steam

Effects of pressure on the formation of HCN and NH₃ during the pyrolysis and gasification of Loy Yang brown coal in steam were investigated using a pressurised drop-tube/fixed-bed reactor. The NH₃ yield increased with increasing pressure during both pyrolysis and gasification. Increasing pressure selectively favours the formation of NH₃ at the expenses of other N-containing species. The changes in the yield of NH₃ with increasing pressure were mainly observed in the feeding periods both during pyrolysis and gasification and were closely related to the formation and subsequent cracking of soot both as a result of intensified thermal cracking of volatile precursors inside the particles and as a result of volatile-char interactions after the release of volatiles. While the corresponding HCN yield during pyrolysis showed little sensitivity to changes in pressure, the HCN yield during gasification in steam showed some increases with increasing pressure. Our data indicate that the direct hydrogenation of char-N by H radicals, favoured by the presence of steam, is the main route of NH₃ formation during pyrolysis and gasification. The direct conversion, either through hydrogenation or hydrolysis, of HCN into NH₃ on char surface during the pyrolysis and gasification of brown coal is not an important route of NH₃ formation.     

Inhibition of steam gasification of char by volatiles in a fluidized bed under continuous feeding of a brown coal

Steam gasification of a Victorian brown coal was performed in an atmospheric bubbling fluidized-bed reactor with continuous feeding of the coal. The gasification converted no more than 28, 51 and 71% of the nascent char (on a carbon basis) at 1120, 1173 and 1223 K, respectively. The char recovered from the fluidized bed was, nonetheless, gasified toward complete conversion when exposed to steam in another reactor, in which volatiles from the pyrolysis were absent while interaction between the char and products from the gasification was minimized. Atmosphere created in the fluidized bed thus prevented the char gasification from taking place beyond upper-limit conversion. In the absence of volatiles, nascent char underwent gasification catalyzed by inherent metallic species and non-catalytic gasification in parallel. The non-catalytic gasification was greatly decelerated by the presence of H₂ in the gas phase due to its dissociative chemisorption onto free carbon sites forming H-laden carbon. H₂ was, however, not a so strong inhibitor as to terminate the gasification. It was rather suggested that much more H-laden carbon was formed through dissociative chemisorption of volatiles and/or chemisorption of hydrogen radical from thermal cracking of volatiles in the gas-phase, which resulted in prevention of the non-catalytic gasification. It seemed that the char was converted in the fluidized-bed mainly by the catalytic gasification, while the conversion was limited due to deactivation of metallic species within the char matrix and their release from the char.     

Changes in char reactivity due to char-oxygen and char-steam reactions using Victorian brown coal in a fixed-bed reactor

This study was to examine the influence of reactions of char–O2 and char–steam on the char reactivity evolution. A newly-designed fixed-bed reactor was used to conduct gasification experiments using Victorian brown coal at 800 °C. The chars prepared from the gasification experiments were then collected and subjected to reactivity characterisation (ex-situ reactivity) using TGA (thermogravimetric analyser) in air. The results indicate that the char reactivity from TGA was generally high when the char experienced intensive gasification reactions in 0.3%O2 in the fixed-bed reactor. The addition of steam into the gasification not only enhanced the char conversion sig-nificantly but also reduced the char reactivity dramatical y. The curve shapes of the char reactivity with involve-ment of steam were very different from that with O2 gasification, implying the importance of gasifying agents to char properties.     

Effects of volatile–char interaction on the formation of HCN and NH3 during the gasification of Victorian brown coal in O2 at 500 °C

In a coal gasifier interactions between volatiles and char are significant. The partly reducing conditions in a gasifier would mean the presence of high concentration of partial oxidation products and radicals surrounding the char particles. Currently, little is known about the effects of in situ volatile–char interactions on the conversion of char-N. This study examines the effect of in situ volatile–char interactions on the formation of HCN and NH₃ during the low temperature (500 °C) gasification of Loy Yang brown coal in oxygen. Two novel reactor systems were used. The reactor configurations allowed the quantification of HCN and NH₃ from char-N gasification, volatile-N oxidation and volatile–char interactions separately. Our results indicate that volatile–char interactions can have drastic effects on coal-N conversion during gasification by providing an important source of the radicals for the formation of HCN and NH₃ from char-N during gasification in 4% or 8% O₂ at 500 °C. In the presence of radicals and O₂, N-containing structures in the nascent char can be easily broken down to give HCN and NH₃ during the gasification of the char. In the absence of O₂, some of the nascent char-N structures may stabilise into structures less favourable for the formation of HCN and NH₃ and more favourable for the formation of other N-containing species such as NO_x.     

Formation of NOx precursors during the pyrolysis of coal and biomass. Part IX. Effects of coal ash and externally loaded-Na on fuel-N conversion during the reforming of coal and biomass in steam

Ash interacts strongly with char and volatiles in a gasifier, especially in a fluidised-bed gasifier. This study aims to investigate the effects of ash or ash-forming species on the conversion of fuel-N during gasification. A Victorian (Loy Yang) brown coal and a sugar cane trash were gasified in two novel fluidised-bed/fixed-bed reactors where the interactions of ash with char and/or volatiles could be selectively investigated. Our results show that the interaction of ash with char and/or volatiles could lead to increases in the yield of NH₃ and decreases in the yield of HCN although the increases were not always matched exactly by the decreases. Loading NaCl or Na₂CO₃ into the brown coal was also found to affect the formation of HCN and NH₃ during gasification. In addition to the possible catalytic hydrolysis of HCN into NH₃ particularly at high temperatures, two other causes were identified for the changes in the HCN and NH₃ yields. It is believed that some ash species could migrate into the char matrix to affect the local availability of H radicals or to catalyse the formation of NH₃ selectively. The interactions of ash (or Na loaded into the coal) with volatiles could enhance the formation of soot-N, which would be gasified favourably to form NH₃.