Synthesis of soluble and thermally stable polyamides from diamine containing (quinolin‐8‐yloxy) aniline pendant group

A novel diamine monomer having pendant 4‐(quinolin‐8‐yloxy) aniline group was successfully synthesized via aromatic substitution reaction of 8‐quinolinol with p‐fluoronitrobenzene followed by Pd/C catalyzed hydrazine reduction, amidation reaction between 4‐(quinolin‐8‐yloxy) aniline and 3,5‐dinitrobenzoylcholoride followed by Pd/C catalyzed hydrazine reduction. The diamine monomer was fully characterized by using FTIR, ¹H‐NMR, ¹³C‐NMR, and elemental analysis. The diamine monomer was polymerized with various aromatic and aliphatic dicarboxylic acids to obtain the corresponding polyamides. The polyamides had inherent viscosity in the range of 0.30–0.41 dL/g and exhibited excellent solubility in the polar aprotic solvents such as DMAc, NMP, N,N‐dimethylformamide, Pyridine, and DMSO. The glass transition temperatures (T_g) of the polymers are high (up to 313°C) and the decomposition temperatures (T_i) range between 200 and 370°C, depending on the diacids residue in the polymers backbone. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and characterization of new optically active poly(amide‐imide‐urethane) thermoplastic elastomers,derived from 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L‐leucine‐p‐aminobenzoic acid) and PEG‐MDI

A new class of optically active poly(amide‐imide‐urethane) was synthesized via two‐step reactions. In the first step, 4,4′‐methylene‐bis(4‐phenylisocyanate) (MDI) reacts with several poly(ethylene glycols) (PEGs) such as PEG‐400, PEG‐600, PEG‐2000, PEG‐4000, and PEG‐6000 to produce the soft segment parts. On the other hand, 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L ‐leucine‐p‐amidobenzoic acid) (2) was prepared from the reaction of 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L ‐leucine) diacid chloride with p‐aminobenzoic acid to produce hard segment part. The chain extension of the above soft segment with the amide‐imide 2 is the second step to give a homologue series of poly(amide‐imide‐urethanes). The resulting polymers with moderate inherent viscosity of 0.29–1.38 dL/g are optically active and thermally stable. All of the above polymers were fully characterized by IR spectroscopy, elemental analyses, and specific rotation. Some structural characterization and physical properties of this new optically active poly(amide‐imide‐urethanes) are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2288–2294, 2004     

Synthesis and characterization of Schiff‐base‐containing polyimides

Benzyl bisthiosemicarbazone and its complexes with nickel (NiLH₄) and copper (CuLH₄) were used as diamine monomers for the synthesis of new Schiff‐base polyimides. The solution polycondensation of these monomers with the aromatic dianhydrides afforded metal‐containing Schiff‐base polyimides with inherent viscosities of 0.98–1.33 dL/g (measured in N‐methyl‐2‐pyrrolidone at 25°C). The polyimides were generally soluble in a wide range of solvents such as N,N‐dimethylformamide, N,N‐dimethylacetamide, tetrahydrofuran, dimethyl sulfoxide, tetrachloroethane, hexamethylene phosphoramide, N‐methyl‐2‐pyrrolidone, ethyl acetate, and pyridine at room temperature. The initial degradation temperatures of the resultant polyimides fell in the range of 220–350°C in nitrogen with char yields ranging from 36 to 64% at 700°C. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis,characterization, and thermal degradation of oligo‐2‐(morpholinoiminomethyl)phenol and its Pb(II) complex compound

The oxidative polycondensation reaction conditions of 2‐(morpholinoiminomethyl)phenol were studied with H₂O₂, air O₂, and sodium hypochloride (NaOCl) oxidants in an aqueous alkaline medium between 40 and 90°C. The structure of oligo‐2‐(morpholinoiminomethyl)phenol was characterized with ¹H‐ and ¹³C‐NMR, Fourier transform infrared, ultraviolet–visible, size exclusion chromatography, and elemental analysis techniques. Under the optimum reaction conditions, the yield of oligo‐2‐(morpholinoiminomethyl)phenol was 28% for the H₂O₂ oxidant, 12% for the air O₂ oxidant, and 58% for the NaOCl oxidant. According to the size exclusion chromatography analysis, the number‐average molecular weight, weight‐average molecular weight, and polydispersity index of oligo‐2‐(morpholinoiminomethyl)phenol were 2420 g/mol, 2740 g/mol, and 1.187 with H₂O₂, 1425 g/mol, 2060 g/mol, and 1.446 with air O₂, and 1309 g/mol, 1401 g/mol, and 1.070 with NaOCl, respectively. Thermogravimetry/dynamic thermal analysis showed that the oligo‐2‐(morpholinoiminomethyl)phenol–lead complex compound was more stable than 2‐(morpholinoiminomethyl)phenol and oligo‐2‐(morpholinoiminomethyl)phenol against thermal degradation. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:3795–3804, 2006     

Investigation of nanostructure and properties of aromatic–aliphatic polyamide‐based nanocomposites with clay additives

Aromatic–aliphatic polyamide/clay nanocomposites were produced using solution intercalation technique. Surface modification of the clay was performed with ammonium salt of aromatic diamine and the polyamide chains were produced by condensation of 4‐aminophenyl sulfone with sebacoyl chloride (SCC) in dimethyl acetamide. Carbonyl chloride endcapped polymer chains were prepared by adding extra SCC near the end of polymerization reaction. The nanocomposites were investigated for organoclay dispersion, water absorption, mechanical, and thermal properties. Formation of delaminated and intercalated nanostructures was confirmed by X‐ray diffraction and TEM studies. Tensile strength and modulus improved for nanocomposites with optimum organoclay content (8 wt %). Thermal stability and glass transition temperatures of nanocomposites increased relative to pristine polyamide with augmenting organoclay content. The amount of water uptake for these materials decreased as compared with the neat polyamide. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis of soluble and thermally stable polyimides from 3,5‐diamino‐N‐(4‐(8‐quinolinoxy) phenyl) aniline and various dianhydrides

Three novel polyimides (PIs) having pendent 4‐(quinolin‐8‐yloxy) aniline group were prepared by polycondensation of a new diamine with commercially available tetracarboxylic dianhydrides, such as pyromellitic dianhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, and bicyclo[2.2.2]‐oct‐7‐ene‐2,3,5,6‐tetracarboxylic dianhydride. These PIs were characterized by FTIR, ¹H NMR, and elemental analysis; they had high yields with inherent viscosities in the range of 0.4–0.5 dl g⁻¹, and exhibited excellent solubility in many organic solvents such as N,N‐dimethyl acetamide, N,N′‐dimethyl formamide, N‐methyl pyrrolidone (NMP), dimethyl sulfoxide, and pyridine. These PIs exhibited glass transition temperatures (T_g) between 250 and 325° C. Their initial decomposition temperatures (T_i) ranged between 270 and 450°C, and 10% weight loss temperature (T₁₀) up to 500°C with 68% char yield at 600°C under nitrogen atmosphere. Transparent and hard polymer films were obtained via casting from their NMP solutions. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and properties of novel aromatic copolyamides containing chloro‐substituted phthalazinone moiety in the main chain

A series of novel copolyamides were synthesized by the direct polycondensation of 1,2‐dihydro‐2‐(4‐carboxyphenyl)‐4‐[3‐chloro‐4‐(4‐carboxyphenoxyl)phenyl]‐phthalazinone ( 1 ), terephthalic acid (TPA) with three commercial diamines. The inherent viscosities of the polyamides were between 0.82 and 1.86 dL/g. When the molar ratios of 1 and TPA were higher than 1 : 1, the polymers were soluble in some polar aprotic solvents such as N‐methyl‐pyrrolidone and N,N‐dimethyl acetamide etc. These polymers were amorphous with 10% weight loss temperatures in N₂ above 490°C and their glass transition temperatures were above 269°C. Some films of the polymers were pale yellow and transparent with tensile strengths up to 147.8 MPa, initial modulus up to 2.56 GPa and elongations at break values up to 9.8%, which depended on the repeating unit structures. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis,thermal, and dynamic mechanical properties of 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane‐containing polydimethylsiloxanes

New and effective approaches to the synthesis of 1,3‐bis(diphenylsilyl)‐2,2,4,4‐tetraphenylcyclodisilazane‐containing polydimethylsiloxanes ( P1 and P2 ) were developed. P1 was obtained by polycondensation of cyclodisilazane lithium salt and chloroterminated polydimethylsiloxane. P2 was produced by hydrosilylation of vinyl‐terminated cyclodisilazane and hydrogen‐terminated polydimethylsiloxane. The polycondensation completed quickly at room temperature, while the hydrosilylation was facile and did not require cumbersome air‐sensitive operations. P1 and P2 were characterized by Fourier transform infrared, nuclear magnetic resonance, gel permeation chromatography, differential scanning calorimetry, thermogravimetric analysis (TGA), and isothermal gravimetric analysis (IGA). TGA revealed the outstanding thermal properties of P1 and P2 with 5% weight loss temperatures (T_d5) higher than 450°C. IGA proved their better thermal stability at 450°C for 800 min, compared to polydimethyldiphenylsiloxane. Dynamic mechanical analysis showed that silicone rubbers made from cyclodisilazane‐containing polydimethylsiloxanes could have a maximum tan δ value as high as 1.13 and had good prospects for damping material applications. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Fluidity improvement of semiaromatic polyamides: Modification with oligomers

Poly(decamethylene terephthalamide) PA10T with different relative viscosities (RV) were successfully produced by the reaction of 1,10‐decanediamine and terephthalic acid through molecular weight regulator benzoic acid (BA). RV was shown to be decreased linearly with increasing BA concentrations and detailed structures of PA10Ts were characterized by ¹³C‐NMR. Fluidity of PA10T with varying molecular weight was tested and low RV PA10Ts were used as modifiers to improve fluidity behaviors of high RV PA10Ts, meanwhile mechanical properties were maintained. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40058.     

Synthesis and properties of novel aromatic polyamides derived from 2,2‐bis[4‐(4‐amino‐2‐fluorophenoxy) phenyl]hexafluoropropane and aromatic dicarboxylic acids

A series of polyamides were synthesized by the direct polycondensation of 2,2‐bis[4‐(4‐amino‐2‐fluorophenoxy)phenyl]hexafluoropropane with various commercially available dicarboxylic acids such as terephthalic acid, isophthalic acid, 5‐t‐butyl isophthalic acid, and 2,6‐naphthalene dicarboxylic acid. The synthesized polyamides were soluble in several organic solvents such as N,N‐dimethylformamide, N,N‐dimethylacetamide, dimethyl sulfoxide, tetrahydrofuran, and chloroform, and they exhibited inherent viscosities of 0.42–0.59 dL/g. The polyamides exhibited weight‐average molecular weights of up to 26,000, which depended on the exact repeating unit structure. These polyamides showed good thermal stability up to 440°C for a 10% weight loss in synthetic air. The polyamides synthesized from 5‐t‐butyl isophthalic acid and isophthalic acid exhibited glass‐transition temperatures of 217 and 185°C, respectively (by differential scanning calorimetry) in nitrogen. The polyamides synthesized from terephthalic acid and 2,6‐naphthalene dicarboxylic acid showed melting temperatures of 319 and 385°C, respectively. The polyamides films were pale yellow, with tensile strengths of up to 82 MPa, moduli of elasticity of up to 2.3 GPa, and elongations at break of up to 9%, which depended on the exact repeating unit structure. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 691–696, 2003     

Fabrication and characterization of soluble,high thermal,and hydrophobic polyimides based on 4‐(3,5‐dimethoxyphenyl)‐2,6‐bis(4‐aminophenyl)pyridine

A novel aromatic diamine monomer, 4‐(3,5‐dimethoxyphenyl)‐2,6‐bis(4‐aminophenyl)pyridine (DPAP) was successfully synthesized by 4′‐nitroacetophenone and 3,5‐dimethoxybenzaldehyde as raw material. The structure of DPAP was confirmed by Fourier transform infrared, nuclear magnetic resonance, and mass analysis. A series of polyimides (PIs) were obtained by polycondensation with various dianhydrides via the conventional two‐step method. These PIs showed good solubility in organic solvents. They also presented high thermal stability, the glass transition temperatures (T_g) of polymers were in the range of 325–388 °C, and the temperature at 10% weight loss was in the range of 531–572 °C. Furthermore, these polymers also exhibited outstanding hydrophobicity with the contact angles in the range of 89.1°–93.5°. Moreover, the results of wide‐angle X‐ray diffraction (WAXD) confirmed these polymers showed amorphous structure. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45827.     

Synthesis and characterization of novel wholly para‐oriented aromatic polyamide‐hydrazides containing sulfone‐ether linkages

Four novel wholly para‐oriented aromatic polyamide‐hydrazides containing flexibilizing sulfone‐ether linkages in their main chains have been synthesized from 4‐amino‐3‐hydroxy benzhydrazide (4A3HBH) with either 4,4′‐sulfonyldibenzoyl chloride (SDBC), 4,4′‐[sulfonylbis(1,4‐phenylene)dioxy]dibenzoyl chloride (SODBC), 4,4′‐[sulfonylbis(2,6‐dimethyl‐1,4‐phenylene)dioxy]dibenzoyl chloride (4MeSODBC), or 4,4′‐(1,4‐phenylenedioxy)dibenzoyl chloride (ODBC) via a low‐temperature solution polycondensation reaction. A polyamide‐hydrazide without the flexibilizing linkages is also investigated for comparison. It was synthesized from 4A3HBH and terephthaloyl chloride (TCl) by the same synthetic route. The intrinsic viscosities of the polymer ranged from 2.85 to 4.83 dL g^?1 in N,N‐dimethyl acetamide (DMAc) at 30°C and decreased with introducing the flexibilizing linkages into the polymer. All the polymers were soluble in DMAc, N,N‐dimethyl formamide (DMF), and N‐methyl‐2‐pyrrolidone (NMP), and their solutions could be cast into films with good mechanical strengths. Further, they exhibited a great affinity to water sorption. Their solubility and hydrophilicity increased remarkably by introducing the flexibilizing linkages. The polymers could be thermally cyclodehydrated into the corresponding poly(1,3,4‐oxadiazolyl‐benzoxazoles) approximately in the region of 295–470°C either in nitrogen or in air atmospheres. The flexibilizing linkages improve the solubility of the resulting poly(1,3,4‐oxadiazolyl‐benzoxazoles) when compared with poly(1,3,4‐oxadiazolyl‐benzoxazoles) free from these linkages. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of poly(ester‐ether‐imide)s derived from 5‐(4‐trimellitimidophenoxy)‐1‐trimellitimido naphthalene

A series of novel aromatic poly(ester‐ether‐imide)s with inherent viscosity values of 0.44–0.74 dL g^?1 were prepared by the diphenylchlorophosphate‐activated direct polycondensation of an imide ring‐containing diacid namely 5‐(4‐trimellitimidophenoxy)‐1‐trimellitimido naphthalene ( 1 ) with various aromatic dihydroxy compounds in the presence of pyridine and lithium chloride. Owing to comparison of the characterization data, an ester‐containing model compound ( 2 ) was also synthesized by the reaction of 1 with phenol. The model compound 2 and the resulted polymers were fully characterized by FT‐IR and NMR spectroscopy. The ultraviolet λ_max values of the poly(ester‐ether‐imide)s were also determined. The resulting polymers exhibited an excellent organosolubility in a variety of high polar solvents such as N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethyl sulfoxide, and N‐methyl‐2‐pyrrolidone. They were soluble even in common less polar organic solvents such as pyridine, m‐cresol, and tetrahydrofuran on heating. Crystallinity of the polymers was estimated by means of wide‐angle X‐ray diffraction. The resulted polymers exhibited nearly an amorphous nature. From differential scanning calorimetry thermograms, the polymers showed glass‐transition temperatures between 221 and 245°C. Thermal behaviors of the obtained polymers were characterized by thermogravimetric analysis, and the 10% weight loss temperatures of the poly(ester‐ether‐imide)s were found to be over 410°C in nitrogen. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Synthesis and properties of organosoluble polyimides based on novel flourene‐ring containing diacetamido‐diamine

A new diacetamido‐diamine monomer, N′‐[7‐(acetyl‐4‐aminoanilino)‐9,9‐dioctylflouren‐2‐yl]‐N′‐4‐aminophenyl) acetamide (ADOAc), with flourene‐based structure was prepared from the reaction of 4‐aminoacetanillide with 2,7‐dibromo‐9,9‐dioctylfluorene in the presence of 10 mol % CuI, 20 mol % N,N′‐dimethylethylene diamine as catalyst and K₂CO₃ as base. Two new flourene‐ring containing polyimides were prepared from the reaction of ADOAc with aromatic dianhydrides such as pyromellitic dianhydride (PMDA) and 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA) via chemical imidization of poly(amic acid). The new diamine and the related polyimides were characterized by using conventional methods such as FT‐IR, NMR, and elemental analysis. The polyimides obtained from the reaction of ADOAc with PMDA (PIa) and of ADOAc with BTDA (PIb) had inherent viscosity of 0.49 and 0.58 dL/g respectively, and showed excellent solubility in a variety of organic solvents. The polyimides of PIa and PIb showed excellent thermal stability with 10% weight loss in nitrogen atmosphere at temperatures of 418°C and 407°C and T_g of 172°C and 167°C, respectively. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Catalyzed chain extension of poly(butylene adipate) and poly(butylene succinate) with 2,2′‐(1,4‐phenylene)‐bis(2‐oxazoline)

Low‐molecular‐weight HOOC‐terminated poly(butylene adipate) prepolymer (PrePBA) and poly(butylene succinate) prepolymer (PrePBS) were synthesized through melt‐condensation polymerization from adipic acid or succinic acid with butanediol. The catalyzed chain extension of these prepolymers was carried out at 180–220°C with 2,2′‐(1,4‐phenylene)‐bis(2‐oxazoline) as a chain extender and p‐toluenesulfonic acid (p‐TSA) as a catalyst. Higher molecular weight polyesters were obtained from the catalyzed chain extension than from the noncatalyzed one. However, an improperly high amount of p‐TSA and a high temperature caused branching or a crosslinking reaction. Under optimal conditions, chain‐extended poly(butylene adipate) (PBA) with a number‐average molecular weight up to 29,600 and poly(butylene succinate) (PBS) with an intrinsic viscosity of 0.82 dL/g were synthesized. The chain‐extended polyesters were characterized by IR spectroscopy, ¹H‐NMR spectroscopy, differential scanning calorimetry (DSC), thermogravimetric analysis, wide‐angle X‐ray scattering, and tensile testing. DSC, wide‐angle X‐ray scattering, and thermogravimetric analysis characterization showed that the chain‐extended PBA and PBS had lower melting temperatures and crystallinities and slower crystallization rates and were less thermally stable than PrePBA and PrePBS. This deterioration of their properties was not harmful enough to impair their thermal processing properties and should not prevent them from being used as biodegradable thermoplastics. The tensile strength of the chain‐extended PBS was about 31.05 MPa. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Environment‐friendly synthesis of long chain semiaromatic polyamides with high heat resistance

Long chain semiaromatic polyamides have been synthesized by the reactions of terephthalic acid with long chain aliphatic diamines, and characterized by infrared spectrum, nuclear magnetic resonance and elemental analysis. The thermal behaviors were studied by differential scanning calorimetry analysis and thermogravimetric analysis. The resultant polyamides have intrinsic viscosity ranging from 1.75 to 1.93 dLg^?1. The solubility, dynamic mechanical and mechanical properties of the polyamides have also been investigated. The mechanical properties and heat resistance of long chain semiaromatic polyamides were compared with those of PA9T. PA10T has the advantages of low cost and preparation from environmental friendly solvents and possesses the similar mechanical properties and heat resistance compared to PA9T. The long chain semiaromatic polyamides are a class of promising, heat‐resisting and processability engineering plastics. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of novel aromatic condensation polymers containing rigid benzoxazole pendent groups

A new aromatic diamine monomer containing benzoxazole substituents was prepared by a multistep synthesis starting from 1,4‐dibromo‐2,5‐difluorobenzene. The diamine was polymerized with commercial aromatic dianhydride or dicarboxylic acid chloride monomers to provide several different poly(amic acid)s and polyamides with their inherent viscosities in the range of 0.24–0.46 dL/g. Thermal properties of these polymers including thermal imidization of poly(amic acid)s into polyimides were investigated by using FTIR, DSC, and TGA. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 178–185, 2004     

Synthesis and properties of fluorinated aromatic poly(amide imide)s based on 4,4′‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzophenone and various bis(trimellitimide)s

A CF₃‐containing diamine, 4,4′‐bis(4‐amino‐2‐trifluoromethylphenoxy)benzophenone ( 2 ), was synthesized from 4,4′‐dihydroxybenzophenone and 2‐chloro‐5‐nitrobenzotrifluoride. Imide‐containing diacids ( 3 and 5B_a – 5B_g ) were prepared by the condensation reaction of aromatic diamines and trimellitic anhydride. Then, two series of novel soluble aromatic poly(amide imide)s (PAIs; 6A_a – 6A_k and 6B_a – 6B_g ) were synthesized from a diamine ( 4A_a – 4A_k or 2 ) with the imide‐containing diacids ( 3 and 5B_a – 5B_g ) via direct polycondensation with triphenyl phosphate and pyridine. The aromatic PAIs had inherent viscosities of 0.74–1.76 dL/g. All of the synthesized polymers showed excellent solubility in amide‐type solvents, such as N‐methyl‐2‐pyrrolidone and N,N‐dimethylacetamide (DMAc), and afforded transparent and tough films by DMAc solvent casting. These polymer films had tensile strengths of 90–113 MPa, elongations at break of 8–15%, and initial moduli of 2.0–2.9 GPa. The glass‐transition temperatures of the aromatic PAIs were in the range 242–279°C. They had 10% weight losses at temperatures above 500°C and showed excellent thermal stabilities. The 6B series exhibited less coloring and showed lower yellowness index values than the corresponding 6A series. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102:3641–3653, 2006     

Synthesis and characterization of novel Schiff‐base polyamides from copper/benzil bisthiosemicarbazone complexes

A new copper‐containing Schiff‐base diamine, benzil bis(thiosemicarbazonato)copper(II) (CuLH₄), was synthesized in two steps from benzil bisthiosemicarbazone (LH₆). The ligand LH₆ and the complex CuLH₄ were characterized with Fourier transform infrared spectroscopy, ¹H‐NMR, and elemental analysis. CuLH₄ was used to prepare novel polyamides. The low‐temperature solution polycondensation of the complex CuLH₄ with various aromatic and aliphatic diacid chlorides afforded copper‐containing Schiff‐base polyamides with inherent viscosities of 0.25–0.36 dL/g in N,N‐dimethylformamide (DMF) and 0.75 dL/g in H₂SO₄ at 25°C. The polyamides were generally soluble in a wide range of solvents, such as DMF, N,N‐dimethylacetamide, tetrahydrofuran, dimethyl sulfoxide, ethyl acetate, tetrachloroethane, hexamethylene phosphoramide, N‐methylpyrrolidone, and pyridine. Thermal analysis showed that these polyamides were practically amorphous, decomposed above 270°C, and exhibited 50% weight loss at and above 400°C. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis of polyamide 6/11 copolymers and their use as matrix polymer in wood‐plastic composites

The goal of this study was to investigate the synthesis and the resulting thermal, rheological, and mechanical properties of polyamide 6/11 copolymers (PA 6/11) as a function of their composition and to further investigate their usability as matrix polymers for wood‐plastic composites (WPC). A significant composition dependency of the melting temperature was found due to the hindered crystallization of the PA 6/11 copolymers with increasing content of the minor component. In result, the lowest melting temperature of the copolymers was measured at 120 °C for 40 wt % of ?‐caprolactam (PA 6/11‐40/60) by DSC analysis. Due to its low melting point and feasible mechanical properties, a copolyamide with 70 wt % of ?‐caprolactam (PA 6/11‐70/30) was chosen as matrix material for the processing of WPC. Incorporation of 30 wt % of wood fibers into PA 6/11‐70/30 caused a significant increase in tensile modulus and a decrease in tensile strength and strain at break. However, the processed WPC still showed an exceptional ductility with a strain at break of 15 to 20%. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44155.