Synthesis and characterization of xanthan gum‐g‐N‐vinyl formamide with a potassium monopersulfate/Ag(I) system

A xanthan gum‐g‐N‐vinyl formamide graft copolymer was synthesized through the graft copolymerization of N‐vinyl formamide (NVF) onto xanthan gum with an efficient system, that is, potassium monopersulfate (PMS)/Ag(I) in an aqueous medium. The effects of the concentrations of Ag(I), PMS (KHSO₅), hydrogen ion, xanthan gum, and NVF along with the time and temperature on the graft copolymerization were studied by the determination of the grafting parameters (grafting ratio, add‐on, conversion, grafting efficiency, and homopolymer) and the rate of grafting. The maximum grafting ratio was obtained at a 0.6 g/dm³ concentration of xanthan gum. All the parameters showed an increasing trend with an increasing concentration of peroxymonosulfate, except the homopolymer percentage, which showed a decreasing trend. The grafting ratio, add‐on conversion, grafting efficiency, and rate of grafting increased with the concentration of Ag(I) increasing from 0.8 × 10^?2 to 1.2 × 10^?2 mol/dm³. The optimum time and temperature for the maximum degree of grafting were 90 min and 35°C, respectively. The graft copolymer was characterized with IR spectral analysis, thermogravimetric analysis, and differential calorimetry analysis. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1637–1645, 2006     

Alginic acid‐g‐poly(N‐vinylformamide) graft copolymer: Synthesis,characerization, swelling,and flocculation property

The graft copolymer of N‐vinylformamide with alginic acid was synthesized by free radical polymerization using potassium peroxymonosulphate and thiourea as redox pair in inert atmosphere. The optimum conditions for maximum grafting have been determined by varying the concentrations of N‐vinylformamide, potassium peroxymonosulphate, thiourea, sulfuric acid, alginic acid as well as time duration and temperature. The grafting parameters increase up to the certain concentrations of N‐vinylformamide, potassium peroxymonosulhate, thiourea, and hydrogen ion while thereafter grafting parameters decrease. The effect of alginic acid concentration on grafting parameters has been observed to decrease continuously. It has also been found that grafting parameters increase up to certain time and temperature, respectively, and thereafter decrease. The swelling properties of graft copolymer in terms of swelling ratio and percent swelling are investigated. Flocculation property of pure and grafted sample for both coking and noncoking coals is also investigated for the treatment of coal mine waste water. The graft copolymer has been characterized by Fourier transform infrared spectroscopy as well as thermogravimetic analysis. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of graft copolymer (guar gum–g–N‐vinyl‐2‐pyrrolidone) and investigation of metal ion sorption and swelling behavior

Graft copolymer of N‐vinyl‐2‐pyrrolidone with guar gum was synthesized and its reaction conditions were optimized for better yield using potassium peroxymonosulfate (PMS) and glycolic acid (GA) as a redox initiator. The effect of PMS, GA, hydrogen ions, guar gum, and N‐vinyl‐2‐pyrrolidone (NVP) along with reaction time and temperature were studied by determining the grafting parameters: grafting ratio, efficiency, conversion, add‐on, homopolymer, and rate of grafting. It was observed that the maximum yield occurred at with a time of 120 min at a temperature of 45°C and a guar gum concentration of 0.4 g/L concentration. The graft copolymer was characterized by infrared spectroscopy and thermal analysis. The activation energy for the grafted and ungrafted gum was calculated. It was observed that the graft copolymer was thermally more stable than the pure gum. The swelling and metal ion sorption behavior of guar gum and guar gum‐g‐N‐vinyl‐2‐pyrrolidone also were studied. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 2480–2489, 2006     

Synthesis of polyacrylamide with pendant poly(n‐octyl acrylate) chains using macromer technique and studies on their properties

An amphiphilic graft copolymer of polyacrylamide (PAM) with uniform poly(n‐octyl acrylate) (POA) grafts was synthesized by copolymerization of AM with POA macromer in solution using azobisisobutyronitrile as the initiator. The macromer was synthesized by free radical polymerization of octyl acrylate in the presence of different amounts of thioglycolic acid as the chain transfer agent, followed by termination with glycidyl methacrylate. The reactivity ratio and effects of copolymerization conditions on the conversion of macromer or grafting efficiency were studied. The crude products were purified by extraction with toluene and water successively. The purified graft copolymer was characterized by IR, DSC, and TEM. PAM‐g‐POA can bring about microphase separation and exhibits good emulsifying properties and water absorbency. PAM‐g‐POA exhibits a very good compatibilizing effect on the acrylic rubber/poly(vinyl chloride) blends. About 2–3% of the graft copolymer is enough for enhancing the tensile strength of the blends. The tensile strength of the blends is more than twice that without the compatibilizer. DSC and SEM demonstrated the enhancement of compatibility in the presence of the graft copolymer. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers     

Temperature‐responsive alginate‐g‐poly(N,N‐diethylacrylamide) copolymer: Synthesis,characterization, and swelling behavior

Temperature‐responsive polymers have recently gained importance due to their applications in drug delivery. Herein, temperature‐responsive graft copolymer (Alg‐g‐PDEAAm) of alginate and N,N‐diethylacrylamide was synthesized by microwave‐assisted copolymerization using potassium persulfate/N,N,N′,N′‐tetramethylethylenediamine initiator system. The reaction conditions for the best grafting (331%) have been optimized by changing microwave irradiation time, temperature, N,N‐diethylacrylamide, and alginate concentrations. The spectroscopic characteristic, thermal properties, and surface morphology of the copolymers were investigated by FTIR, ¹H‐NMR, DSC/TGA, XRD, gel permeation chromatography, and SEM. Furthermore, low critical solution temperatures of Alg‐g‐PDEAAm copolymers were detected by UV spectroscopy. Swelling ratio of graft microspheres was carried out at 25, 32, and 37 °C, and microspheres were found exhibiting temperature‐responsive property. Cytotoxicity test indicated the Alg‐g‐PDEAAm copolymer and its microsphere were biocompatible. Therefore, based on the results the synthesized temperature‐responsive copolymer could be considered as a promising biomaterial. © 2018 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 46688.     

A study toward the physicochemical properties of graft copolymer (partially carboxymethylated guar gum‐g‐N,N′‐dimethylacrylamide): Synthesis and characterization

Unreported graft copolymer of N,N′‐dimethylacrylamide (DMA) with partially carboxymethylated guar gum (CmgOH) has been synthesized and the reaction conditions have been optimized for affording maximum grafting using a potassium peroxymonosulphate (PMS)/thiourea (TU) redox initiators under nitrogen atmosphere. The study of graft copolymerization has been performed to observe maximum value of grafting parameters except percentage of homopolymer by varying the concentrations of DMA, PMS, and TU. The grafting parameters increase continuously on increasing the concentration of DMA from 8 × 10^?2 to 24 × 10^?2 mol dm^?3, PMS from 5 × 10^?3 to 21 × 10^?3 mol dm^?3, and TU from 1.6 × 10^?3 to 4.8 × 10^?3 mol dm^?3. The optimum temperature and time for grafting of DMA onto CmgOH were found to be 35°C and 120 min, respectively. The water‐swelling capacity of graft copolymer is investigated. Flocculation property for both coking and noncoking coals is studied for the treatment of coal mine waste water. The graft copolymer is characterized by Fourier transform infrared spectroscopy and thermogravimetric analysis. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Graft copolymerization of 2‐acrylamido‐2‐methyl‐1‐propanesulphonic acid onto carboxymethylcellulose (sodium salt) using bromate/thiourea redox pair

Unreported graft copolymer of 2‐acrylamido‐2‐methyl‐1‐propanesulphonic acid (AMPS) with sodium carboxymethylcellulose (Na‐CMC) was synthesized and reaction conditions were optimized using a bromate/thiourea redox pair under an inert atmosphere at 40°C. Grafting ratio, add on, and conversion increase as the concentration of thiourea and [H⁺] increases up to 3.6 × 10^?3 and 0.6 × 10^?2 mol dm^?3, respectively, while on increasing the concentration of bromate ion and Na‐CMC, grafting ratio, add on, and conversion decrease. The samples of Na‐CMC and grafted Na‐CMC with AMPS were subjected to thermogravimetric analysis, with the objective of studying the effect of grafting of AMPS on the thermal stability of graft copolymer. The graft copolymer was found to be more thermally stable than pure Na‐CMC. Comparing the IR spectra of pure with grafted Na‐CMC confirm the evidence of grafting. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 100: 26–34, 2006     

Synthesis,effectiveness, and working mechanism of humic acid‐{sodium 2‐acrylamido‐2‐methylpropane sulfonate‐co‐N,N‐dimethyl acrylamide‐co‐acrylic acid} graft copolymer as high‐temperature fluid loss additive in oil well cementing

Monomers of 2‐acrylamido‐2‐methylpropane sulfonic acid (AMPS®), N,N–dimethyl acrylamide (NNDMA) and acrylic acid (AA) were grafted on humic acid as backbone by aqueous free radical copolymerization in such a manner that a graft copolymer possessing lateral terpolymer chains was obtained. Molar ratios between AMPS®, NNDMA, and AA were found to be 1 : 1.54 : 0.02 and the ratio between backbone and graft chain was 20 : 80 wt %. The synthesized fluid loss additive (FLA) was characterized by size exclusion chromatography (SEC), charge titration, and Brookfield viscometry. Thermogravimetric and SEC analysis revealed stretched backbone worm architecture for the polymer whereby humic acid constitutes the backbone decorated with lateral graft chains. Grafting was confirmed by SEC data (R_g) and by ineffectiveness of a blend of AMPS®‐NNDMA‐AA copolymer with humic acid. Their performance as high temperature FLA was studied at 150°C by measuring static filtration properties of oil well cement slurries containing 35% bwoc of silica fume and 1.2% bwoc AMPS®‐co‐itaconic acid retarder. At this temperature, 1.0% bwoc graft copolymer achieves API fluid loss value of 40 mL, thus confirming high effectiveness. The graft copolymer viscosifies cement slurries less than other common synthetic FLAs. The working mechanism of the graft copolymer was found to rely on adsorption onto surface of hydrating cement, as was evidenced by adsorption and zeta potential measurements. Adsorption is hardly affected by temperature and results in constriction of the filter cake pores. The study provides insight into performance of cement additives under the harsh conditions of high temperature and high pressure. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Preparation and characterization of dual responsive sodium alginate‐g‐poly(vinyl alcohol) hydrogel

Poly(vinyl alcohol) (PVA) was chosen as a controllable gelator to prepare sodium alginate (SA)‐based physically cross‐linked dual‐responsive hydrogel by three steps. First, polyvinyl acetate (PVAc) was grafted onto SA via radical copolymerization. Then, the copolymer was subsequently converted into SA‐g‐poly(vinyl alcohol) (SAPVA) by alcoholysis reaction. PVA content of SAPVA was tailored by controlling the graft percentage of PVAc, i.e. through varying the amount of vinyl acetate during copolymerization. Finally, SAPVA hydrogels were formed by freezing‐thawing cycles. The structure of the graft copolymers was verified with FTIR spectroscopy. X‐ray diffraction analysis results revealed that the crystallinity of SAPVA hydrogels depended on the PVA content of SAPVA. The swelling test showed that SAPVA hydrogels were pH‐responsive, and the swelling was reversible. SAPVA hydrogels also behaved electric‐responsive. In addition, the pH‐sensitivity of SAPVA hydrogels was able to be controlled with the composition of the hydrogels. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Natural rubber‐g‐methyl methacrylate/poly(methyl methacrylate) blends

The grafting of the methyl methacrylate (MMA) monomer onto natural rubber using potassium persulfate as an initiator was carried out by emulsion polymerization. The rubber macroradicals reacted with MMA to form graft copolymers. The morphology of grafted natural rubber (GNR) was determined by transmission electron microscopy and it was confirmed that the graft copolymerization was a surface‐controlled process. The effects of the initiator concentration, reaction temperature, monomer concentration, and reaction time on the monomer conversion and grafting efficiency were investigated. The grafting efficiency of the GNR was determined by a solvent‐extraction technique. The natural rubber‐g‐methyl methacrylate/poly(methyl methacrylate) (NR‐g‐MMA/PMMA) blends were prepared by a melt‐mixing system. The mechanical properties and the fracture behavior of GNR/PMMA blends were evaluated as a function of the graft copolymer composition and the blend ratio. The tensile strength, tear strength, and hardness increased with an increase in PMMA content. The tensile fracture surface examined by scanning electron microscopy disclosed that the graft copolymer acted as an interfacial agent and gave a good adhesion between the two phases of the compatibilized blend. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 428–439, 2001     

Synthesis of styrene–ethylene–butylene–styrene triblock copolymer‐g‐polylactic acid copolymer and its potential application as a toughener for polylactic acid

The copolymer of styrene–ethylene–butylene–styrene triblock copolymer‐g‐polylactic acid (SEBS‐g‐PLA) was successfully prepared using a novel solvothermal synthetic method, in which the graft copolymerization of PLA and SEBS was simply performed in cholorform solution at 100–150°C with benzoyl peroxide (BPO) as initiator. The effect of various factors including the reaction temperature and time and the content of BPO and PLA on the graft copolymerization was investigated in detail. It is found that the optimal reaction condition for the grafted copolymers SEBS‐g‐PLA was 120°C for 5 h, while the optimal formulation of SEBS/PLA/BPO was 5 g/2 g/0.5 g in 30 mL chloroform. The properties and microstructures of the obtained SEBS‐g‐PLA copolymers were also studied. The tensile strength and elongation at break were higher than that of pure SEBS and improved with the increase of grafting degree. In addition, SEBS‐g‐PLA copolymer possessed two‐phase structure with vague phase boundaries. The as‐prepared SEBS‐g‐PLA copolymers can be used as the toughening component to improve the impact strength of PLA. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Graft copolymerization of N‐vinyl‐2‐pyrrolidone onto sodium carboxymethylcellulose with azobisisobutyronitrile as the initiator

Graft copolymers of sodium carboxymethylcellulose with N‐vinyl‐2‐pyrrolidone were prepared in aqueous solutions with azobisisobutyronitrile as the initiator. The graft copolymers [sodium carboxymethylcellulose‐g‐poly(N‐vinyl‐2‐pyrrolidone)] were characterized with Fourier transform infrared spectroscopy, elemental analysis, nuclear magnetic resonance spectroscopy, differential scanning calorimetry, and scanning electron microscopy. The grafting parameters, including the graft yield of the graft copolymer and the grafting efficiency of the reaction, were evaluated comparatively. The effects of reaction variables such as the time, temperature, and monomer and initiator concentrations on these parameters were studied. The graft yield and grafting efficiency increased and then decreased with increasing concentrations of N‐vinyl‐2‐pyrrolidone and azobisisobutyronitrile and increasing polymerization temperatures. The optimum temperature and polymerization time were 70°C and 4.30 h, respectively. Further changes in the properties of grafted sodium carboxymethylcellulose, such as the intrinsic viscosity, were determined. The overall activation energy for the grafting was also calculated to be 10.5 kcal/mol. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 936–943, 2007     

Phase‐transfer‐agent‐aided polymerization and graft copolymerization of acrylamide

The use of phase‐transfer catalysts, with water‐insoluble initiators, for polymerization and graft copolymerization reactions was explored. The polymerization of a water‐soluble vinyl monomer, acrylamide (AAm), and the graft copolymerization of AAm onto a water‐insoluble polymer backbone, isotactic polypropylene (IPP), with a water‐insoluble initiator, benzoyl peroxide (BPO), and a phase‐transfer catalyst, tetrabutyl ammonium bromide (Bu₄N⁺Br^?), were carried out in a water/xylene binary solvent system. The conversion percentage of AAm into polyacrylamide (PAAm) and the percentage of grafting of AAm onto IPP were determined as functions of various reaction parameters, such as the BPO, AAm, and phase‐transfer‐catalyst concentrations, the amounts of water and xylene in the water/xylene mixture, the time, and the temperature. The graft copolymer, IPP‐g‐PAAm, was characterized with IR spectroscopy and thermogravimetric analysis. By a comparison of the results of the phase‐transfer‐catalyzed graft copolymerization of AAm onto IPP and the preirradiation method, it was observed that the optimum reaction conditions were milder for the phase‐transfer‐catalyst‐aided graft copolymerization. Milder reaction conditions, including the temperature, the time of reaction, and a moderate initiator (BPO), in comparison with high‐energy γ‐rays, led to better quality products, and the reaction proceeded smoothly with high productivity. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2364–2375, 2004     

Thermoresponsive and biocompatible poly(vinyl alcohol)‐graft‐poly(N,N‐diethylacrylamide) copolymer: Microwave‐assisted synthesis,characterization, and swelling behavior

Novel thermoresponsive poly(vinyl alcohol)‐graft‐poly(N,N‐diethylacrylamide) (PVA‐g‐PDEAAm) copolymers were prepared by microwave‐assisted graft copolymerization using a potassium persulfate/N,N,N′,N′‐tetramethylethylenediamine (KPS/TEMED) initiator system. The structures of PVA‐g‐PDEAAm copolymers were characterized by ¹H‐NMR, Fourier transform infrared spectroscopy, differential scanning calorimetry/thermogravimetric analysis, gel permeation chromatography, X‐ray diffraction, and scanning electron microscopy. The effects of various process parameters on grafting were systematically studied: microwave power, KPS, monomer and PVA concentrations, and ultraviolet irradiation. Under optimal conditions, the maximum grafting percent and graft efficiency were 101% and 93%, respectively. Furthermore, a lower critical temperature of copolymers was measured in the range 29–31 °C by ultraviolet spectroscopy. The swelling behavior of graft membranes was carried out at various temperatures, and the results showed that the swelling behavior of membranes was dependent on the temperature. In vitro cell culture studies using L929 fibroblast cells confirmed cell compatibility with the PVA‐g‐PDEAAm copolymer and its membrane, making them an attractive candidate for drug delivery systems. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45969.     

Blends of poly(vinyl chloride) (PVC)/natural rubber‐g‐(styrene‐co‐methyl methacrylate) for improved impact resistance of PVC

To improve the mechanical properties of poly(vinyl chloride) (PVC), the possibility of combining PVC with elastomers was considered. Modification of natural rubber (NR) by graft copolymerization with methyl methacrylate (MMA) and styrene (St) was carried out by emulsion polymerization by using redox initiator to provide an impact modifier for PVC. The impact resistance, dynamic mechanical analysis (DMA), and scanning electron microscopy (SEM) of St and MMA grafted NR [NR‐g‐(St‐co‐MMA)]/PVC (graft copolymer product contents of 5, 10, and 15%) blends were investigated as a function of the amount of graft copolymer product. It was found that the impact strength of blends was increased with an increase of the graft copolymer product content. DMA studies showed that NR‐g‐(St‐co‐MMA) has partial compatibility with PVC. SEM confirmed a shift from brittle failure to ductility with an increase graft copolymer content in the blends. The mechanical properties showed that NR‐g‐(St‐co‐MMA) interacts well with PVC and can also be used as an impact modifier for PVC. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1666–1672, 2004     

Controlled degradation of polylactic acid grafting N‐vinyl pyrrolidone induced by gamma ray radiation

Polylactic acid (PLA) films were surface modified by gamma ray irradiation‐induced grafting of N‐vinyl pyrrolidone (NVP). The in vitro degradation behavior of polylactic acid grafting N‐vinyl pyrrolidone (PLA‐g‐PVP) copolymer was analyzed in terms of weight loss, molecular weight, and thermal properties. Grafting NVP significantly accelerated the degradation of PLA. The mass losses of the copolymers, which were less than that of pure PLA at the beginning of the degradation period, sharply accelerated with increasing degradation time. Moreover, the crystallization temperature decreased with increasing degradation time in the same graft ratio, and the degree of crystallinity increased. Cytotoxicity experiments and animal experiments in vivo were carried out to evaluate the biocompatibility of PLA‐g‐PVP copolymer. Varying graft ratios of PVP could control the degradation rate of copolymers, and thus broadening the applications of this material, such as in tissue engineering scaffolds, drug delivery, and prevention of postsurgical adhesion. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Cation exchange membranes by radiation‐induced graft copolymerization of styrene onto PFA copolymer films. III. Thermal stability of the membranes

Thermal stability of cation exchange, PFA‐g‐polystyrene sulfonic acid membranes prepared by radiation‐induced graft copolymerization of styrene onto PFA films followed by sulfonation was studied by thermal gravimetric analysis (TGA) and oven heat treatment. The tested samples included original and grafted PFA films as reference materials. All the membranes showed multistep decomposition patterns due to dehydration, desulfonation, dearomatization, and decomposition of the PFA matrix. Investigations of the individual decomposition behaviors showed that the weight loss strongly depends upon the degree of grafting. However, the decomposition temperatures were found to be independent of the degree of grafting. The loss in some selected membrane properties such as ion exchange capacity and water uptake was found to be function of the degree of grafting, temperature, and the time of heat treatment. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 1877–1885, 2000     

Grafting of N‐vinyl caprolactam and methacrylic acid onto silicone rubber films for drug‐eluting products

Silicone rubber (SR), a material widely used in the biomedical field, was modified with stimuli‐responsive poly(N‐vinyl caprolactam) (PVCL) and poly(methacrylic acid) (PMAA) with the aim of improving its ability to host drug molecules. The grafting of PVCL and PMAA onto SR was carried out by means of a γ‐ray preirradiation method, and the dependence of the grafting yield on the comonomer concentration, preirradiation dose, temperature, and reaction time was evaluated. Modified SR films were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, and swelling studies to confirm the grafting of the copolymer. The SR‐g‐[vinyl caprolactam (VCL)/methacrylic acid (MAA)] copolymers showed a sensitivity to the temperature and pH, high hemocompatibility, and low affinity to bovine serum albumin and fibrinogen proteins. Moreover, the SR‐g‐(VCL/MAA) copolymers were able to host some nonsteroidal anti‐inflammatory drugs, such as diclofenac and ibuprofen, and the antifungal agent nystatin. The graft copolymer was shown to be useful for providing sustained release for several hours; this indicates that the modified SR is a promising material for drug‐eluting medical devices. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41855.     

Synthesis and photo‐ and biodegradabilities of poly[(hydroxybutyrate‐co‐hydroxyvalerate)‐ g‐phenyl vinyl ketone]

The graft copolymer, poly[(hydroxybutyrate‐co‐hydroxyvalerate)‐g‐phenyl vinyl ketone] [P(HBV‐g‐PVK)], was synthesized by graft polymerization of phenyl vinyl ketone (PVK) onto poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) (PHBV) under nitrogen atmosphere using benzoyl peroxide. The structure of P(HBV‐g‐PVK) was identified by Fourier transform IR and ¹H‐NMR spectra. The effects of weight ratio of PVK to PHBV in feed, initiator concentration, reaction time, and reaction temperature on the grafting ratio and grafting efficiency were investigated. The thermal decomposition temperature of P(HBV‐g‐PVK) was 272°C. The tensile strengths of P(HBV‐g‐PVK) after photo‐ or biodegradation were significantly decreased due to degradation by UV irradiation or Aspergillus niger. The value of color difference (ΔE) of P(HBV‐g‐PVK) was greater than that of PHBV. The film surfaces of P(HBV‐g‐PVK) treated with UV irradiation and Aspergillus niger showed many pits as compared with the untreated P(HBV‐g‐PVK). It has been found that the photo‐ and biodegradabilities of P(HBV‐g‐PVK) was excellent. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 1432–1439, 1999     

Study of poly(acrylamide‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) hydrogels made using gamma radiation initiation

Poly(acrylamide‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) hydrogels were synthesized using gamma‐radiation‐initiated polymerization. The progress of copolymerization and crosslinking was observed by viscosity measurement on reaction mixtures subjected to varying radiation doses. The copolymer gels were characterized by differential scanning calorimetry, X‐ray diffraction, scanning electron microscopy, infrared spectroscopy, and elemental analysis. The swelling behavior and other properties of the gels were found to be very similar to those of poly(acrylamide‐co‐2‐acrylamido‐2‐methylpropane sulfonic acid) hydrogels synthesized using conventional free‐radical initiation in the presence of crosslinkers. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1322–1330, 2003