Copolymers of acrylic acid with N‐vinylpyrrolidinone and 2‐hydroxyethyl methacrylate as pH‐responsive hydrogels synthesized through a photoinitiator‐free photopolymerization technique

pH‐sensitive hydrogels for biomedical applications were synthesized using a photoinitiator‐free technique involving the initiation of photopolymerization by donor/acceptor pairs. The differential photocalorimetric technique indicated a high polymerization rate for the N‐vinylpyrrolidinone (NVP, donor)/acrylic acid (AA, acceptor) pair at a 1:1 molar ratio. However, photopolymerization of larger quantities of these monomers (1:1 molar ratio) produced a water‐soluble polymer. Nevertheless, an anionic hydrogel was successfully formed when a small quantity of 2‐hydroxyethyl methacrylate (HEMA) was included in the NVP/AA formulation. A mixture of HEMA and AA, although both are classified as acceptors, photopolymerized to produce a copolymer which functioned as an anionic hydrogel. The swelling and drug release of these hydrogels were investigated in acidic, neutral and basic pH environments. Their biocompatibility with HaCaT human epidermal keratinocyte cells was tested and a positive cell growth as evidenced by the 3‐[4,5‐dimethylthiazol‐2‐yl]‐2,5‐diphenyl tetrazolium bromide (MTT) cell proliferation assay indicated that these hydrogels have no toxic effect on HaCaT. Copyright © 2006 Society of Chemical Industry     

Synthesis,characterization and application of poly[(1‐vinyl‐2‐pyrrolidone)‐co‐(2‐hydroxyethyl methacrylate)] as controlled‐release polymeric system for 2,4‐dichlorophenoxyacetic chloride using an ultrafiltration technique

BACKGROUND: Polymers supporting chemicals used in agriculture have recently been developed to overcome the serious environmental problems of conventional agrochemicals. The success of these formulations is based on a suitable choice of polymer support. Degradable polymeric hydrogels are of particular interest. The gradual release of the bioactive agent can be achieved by hydrolytic or enzymatic cleavage of the linking bond. RESULTS: In this context, poly[(1‐vinyl‐2‐pyrrolidone)‐co‐(2‐hydroxyethyl methacrylate)] [poly(NVP‐co‐HEMA)] has been used as a bioactive carrier reagent. Herein, we report a controlled‐release system with the herbicide 2,4‐dichlorophenoxyacetic acid (2,4‐D) using an ultrafiltration system. Hydrolysis was studied by testing the release at various pH values. A high release with poly(NVP‐co‐HEMA)–2,4‐D was observed at pH = 7 and 10 after two days (Z = 2). The release percentage of copolymer–herbicide increased at pH = 10. It showed release values between 79.0 and 94.5%. Poly(NVP‐co‐HEMA)–herbicide can release a bioactive compound in aqueous solution at pH = 3, 7 and 10. CONCLUSION: Based on the results of homogeneous hydrolysis, it is argued that the herbicide release rate depends on the pH of the reaction environment. This functional polymer could be employed as a biodegradable material for applications in agrichemical release. Copyright © 2008 Society of Chemical Industry     

Radiation synthesis and characterization of poly(N‐vinyl‐2‐pyrrolidone/acrylic acid) and poly(N‐vinyl‐2‐pyrrolidone/acrylamide) hydrogels for some metal‐ion separation

Two different hydrogels, prepared from N‐vinyl‐2‐pyrrolidone/acrylic acid (NVP/AAc) and N‐vinyl‐2‐pyrrolidone/acrylamide (NVP/AAm), were studied for the separation and extraction of some heavy‐metal ions from wastewater. The hydrogels were prepared by the γ‐radiation‐induced copolymerization of the aforementioned binary monomer mixtures. Further modification was carried out for the NVP/AAc copolymer through an alkaline treatment to improve the swelling behavior by the conversion of the carboxylic acid groups into its sodium salts. The thermal stability and swelling properties were also investigated as functions of the N‐vinyl‐2‐pyrrolidone content. The characterization and some selected properties of the prepared hydrogels were studied, and the possibility of their practical use in wastewater treatment for heavy metals such as Cu, Ni, Co, and Cr was investigated. The maximum uptake for a given metal was higher for a treated NVP/AAc hydrogel than for an untreated NVP/AAc hydrogel and was higher for an untreated NVP/AAc hydrogel than for an NVP/AAm hydrogel. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2642–2652, 2004     

Water behavior of poly(vinyl alcohol)/poly(vinylpyrrolidone) interpenetrating polymer network hydrogels

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) and 1‐vinyl‐2‐pyrrolidone were prepared by radical polymerization with 2,2‐dimethoxy‐2‐phenylacetophenone as a photoinitiator and N,N′‐methylenebisacrylamide as a crosslinker. The IPN hydrogels were analyzed for the sorption behavior of water at 35°C and a relative humidity of 95% with a dynamic vapor sorption system, and water diffusion coefficients were calculated. Differential scanning calorimetry was used to quantitatively determine the amounts of freezing and nonfreezing water. The free‐water contents in the IPN hydrogel samples PV51, PV31, and PV11 were 74.40, 64.03, and 60.48% in pure water, respectively. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 24–27, 2003     

Radiation crosslinking and sorption properties of hydrogels based on 1‐vinyl‐2‐pyrrolidone,hydroxyethyl methacrylate,and their copolymers

This work has been concerned with the synthesis of the hydrogels of poly (vinyl pyrrolidone) (NVP), poly (hydroxy ethylmethacrylate) (HEMA), and their copolymer under the effect of gamma radiation in the presence of N,N‐methylenebisacryl‐amide (MBAm) as a crosslinking agent. The effect of the different factors that may affect the gelation and yield product, such as solvent composition and irradiation dose, was investigated. The formed hydrogels were characterized in terms of swelling in water and different organic solvents, X‐ray diffraction (XRD), and IR spectroscopic analysis. The sorption capability of these hydrogels towards some commercial basic and acid dyesstuffs was also studied. The results showed that a solvent mixture composed of equal contents of water and methanol is the most suitable to afford the minimum sol fraction and the highest yield product at a minimal irradiation dose of 10 kGy. It was observed that NVP hydrogel displayed the highest swelling in water, alcohols, and dimethyformamide of ～1300% and a lower tendency to swell in nonpolar solvents. The results showed that HEMA hydrogel has a high affinity to absorb basic dyes while NVP has a tendency for acid dyes. Also, the sorption of either the basic or acid dyes by the different hydrogels was found to greatly depend on the concentration of dye in solution and the mass of the used hydrogel. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 3274–3280, 2004     

Synthesis and properties of silver nanoparticles in chitosan‐based thermosensitive semi‐interpenetrating hydrogels

In this article, thermosensitive poly(N‐isopropyl acrylamide‐co‐vinyl pyrrolidone)/chitosan [P(NIPAM‐co‐NVP)/CS] semi‐interpenetrating (semi‐IPN) hydrogels were prepared by redox‐polymerization using N,N‐methylenebisacrylamide as crosslinker and ammonium persulfate/N,N,N′,N′‐tetramethylethylenediamine as initiator. Highly stable and uniformly distributed Ag nanoparticles were prepared by using the semihydrogel networks as templates via in situ reduction of silver nitrate in the presence of sodium borohydride as a reducing agent. Introduction of CS improves the hydrogels swelling ratio (SR) and stabilizes the formed Ag nanoparticles in networks. Scanning electron microscopy and transmission electron microscopy revealed that Ag nanoparticles were well dispersed with diameters of 10 nm. The semi‐IPN hydrogel/Ag composites had higher SR and thermal stability than its corresponding semi‐IPN hydrogels. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Adsorption of surfactant by hydrophobically modified poly[2‐(diethylamino)ethylmethacrylate‐co‐N‐vinyl‐2‐pyrrolidone/octadecyl acrylate)] hydrogels and effect of surfactant adsorption on the volume phase transition

Hydrophobically modified poly[2‐(diethylamino)ethylmethacrylate‐co‐N‐vinyl‐2‐pyrrolidone/octadecyl acrylate) [P(DEAEMA‐co‐NVP/OA)] hydrogels were synthesized by free‐radical crosslinking copolymerization of 2‐(diethylamino)ethylmethacrylate (DEAEMA), N‐vinyl‐2‐pyrrolidone (NVP) with different amounts of hydrophobic comonomer octadecyl acrylate (OA) in tert‐butanol with ethylene glycole dimethacrylate (EGDMA) as a crosslinker. The swelling equilibrium of the hydrogels was investigated as a function of temperature and hydrophobic comonomer content in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB). The results indicated that the swelling behavior and temperature sensitivity of the hydrogels were affected by the type and concentration of surfactant solutions. Additionally, the amount of the adsorbed SDS and DTAB molecules onto the hydrogels was determined by fluorescence measurements. An increase of OA content in the hydrogel caused an increase in the amount of adsorbed surfactant molecules in both media. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3771–3775, 2007     

Swelling behavior of pH‐ and temperature‐sensitive copolymers containing 2‐hydroxy‐ethyl methacrylate and N‐vinyl‐2‐pyrrolidone crosslinked with new crosslinkers

Copolymers of 2‐hydroxyethyl methacrylate (HEMA) and N‐vinyl‐2‐pyrrolidone (VP) and homopolymers of HEMA and VP were crosslinked in the presence of different mol% of melamine trimethacrylamide (MMAm) and melamine triacrylamide (MAAm) as crosslinkers by bulk radical polymerization. The resultant xerogels were characterized by extracting the soluble fractions and measuring the equilibrium water content. Lower critical solution transition temperatures (LCST) were measured by DSC. The properties of crosslinked HEMA and VP copolymers, VP and HEMA series were evaluated in terms of compositional drift of polymerization, heterogeneous crosslinking, and chemical structure of the relevant components. Soluble fractions of the crosslinked networks were reduced by varying the MAAm and MMAm concentrations. The influence of environmental conditions such as temperature and pH on the swelling behavior of these polymeric gels was investigated. The swelling behaviors of the resulting gels show pH sensitivity. This behavior is explained on the basis that amide groups of VP or crosslinkers could be hydrolyzed to form negatively charged carboxylate ion groups in the produced networks in response to an external pH variation. Copyright © 2004 Society of Chemical Industry     

Synthesis of full and semi Interpenetrating hydrogel from polyvinyl alcohol and poly (acrylic acid‐co‐hydroxyethylmethacrylate) copolymer: Study of swelling behavior,network parameters,and dye uptake properties

Semi and full interpenetrating network (IPN) hydrogels were synthesized by allowing free radical copolymerization of acrylic acid (AA) and hydroxyethyl methacrylate (HEMA) in the matrix of polyvinyl alcohol (PVOH). Accordingly, four different semi IPN hydrogels were prepared with PVOH: copolymer mass ratio of 1 : 1, 1 : 0.75, 1 : 0.5, and 1 : 0.25. These hydrogels were designated as SEMIIPN1, SEMIIPN2, SEMIIPN3, and SEMIIPN4, respectively. In all of these SEMIIPN, after polymerization PVOH was crosslinked with 2 mass % glutaraldehyde to form the semi IPN structure. In a similar way, sequential full IPN were prepared from PVOH and copolymer of AA and HEMA (designated as PAAHEMA) with same composition except in this case apart from crosslinking of PVOH by 2 mass % glutaraldehyde the PAAHEMA copolymer was further crosslinked with N,N′‐methylenebisacrylamide (NMBA) to produce four full IPN hydrogels designated as FULLIPN1, FULLIPN2, FULLIPN3, and FULLIPN4. All of these semi and full IPN type hydrogels were characterized by carboxylic %, FTIR, UV, DTA‐TGA, XRD, SEM, and mechanical properties. The network parameters, swelling and diffusion characteristics of these hydrogels were also studied. The performance of these semi and full IPNs were compared in terms of their relative abilities for removing varied concentration of rhodamine B (RB) and methyl Violet (MV) dyes from water. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Swelling behavior of semi‐interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylamide‐co‐sodium methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐sodium methacrylate) poly(AAm‐co‐SMA) were prepared by the semi IPN method. These IPN hydrogels were prepared by polymerizing aqueous solution of acrylamide and sodium methacrylate, using ammonium persulphate/N,N,N¹,N¹‐tetramethylethylenediamine (APS/TMEDA) initiating system and N,N¹‐methylene‐bisacrylamide (MBA) as a crosslinker in the presence of a host polymer, poly(vinyl alcohol). The influence of reaction conditions, such as the concentration of PVA, sodium methacrylate, crosslinker, initiator, and reaction temperature, on the swelling behavior of these IPNs was investigated in detail. The results showed that the IPN hydrogels exhibited different swelling behavior as the reaction conditions varied. To verify the structural difference in the IPN hydrogels, scanning electron microscopy (SEM) was used to identify the morphological changes in the IPN as the concentration of crosslinker varied. In addition to MBA, two other crosslinkers were also employed in the preparation of IPNs to illustrate the difference in their swelling phenomena. The swelling kinetics, equilibrium water content, and water transport mechanism of all the IPN hydrogels were investigated. IPN hydrogels being ionic in nature, the swelling behavior was significantly affected by environmental conditions, such as temperature, ionic strength, and pH of the swelling medium. Further, their swelling behavior was also examined in different physiological bio‐fluids. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 302–314, 2005     

Swelling and drug‐release behavior of the poly(AA‐co‐N‐vinyl pyrrolidone)/chitosan interpenetrating polymer network hydrogels

A series of novel hydrogels were prepared from acrylic acid (AA), N‐vinyl pyrrolidone (NVP), and chitosan by photopolymerization. The swelling behavior, gel strength, and drug release behavior of the poly(AA/NVP) copolymeric hydrogels and corresponding interpenetrating polymer network hydrogels were investigated. Results showed that the swelling ratios for the present hydrogels decreased with an increase of NVP content in the gel, but the gel strength increased with an increase of NVP content in the gel. Results also showed that the drug‐release behavior for the gels is related to the ionicity of drug and the swelling ratio of the gel. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2135–2142, 2004     

Frontal copolymerization of 2‐hydroxyethyl methacrylate and ethylene glycol dimethacrylate without porogen: comparison with suspension polymerization

Networked, crosslinked poly[(2‐hydroxyethyl methacrylate)‐co‐(ethylene glycol dimethacrylate)] (HEMA‐EGDM) was synthesized by frontal polymerization (FP) using azobisisobutyronitrile as initiator. HEMA‐EGDM copolymers of similar composition were also synthesized by suspension polymerization. The two sets of copolymers were characterized for functional groups (IR), pore volume (mercury intrusion porosimetry), surface area (nitrogen adsorption) and morphology (scanning electron microscopy). FP‐generated polymeric network structures had higher internal pore volumes and surface areas but their surface morphologies were inferior to those of copolymers synthesized by suspension polymerization. Copyright © 2004 Society of Chemical Industry     

Interpenetrating polymer networks based on poly(styrene‐co‐butylacrylate‐co‐hydroxyethyl methacrylate) and SiO2

Copolymer such as poly(styrene‐co‐butylacrylate‐co‐hydroxyethyl methacrylate) p (St‐BA‐HEMA) was prepared via free radical emulsion polymerization method. The resulting copolymer was converted to silicone secondary crosslinked interpenetrating polymer network (IPN) by condensation reaction with tetraethyl orthosilicate (TEOS). The obtained copolymers were characterized by using Fourier transform infrared spectroscopy (FTIR). Thermal properties of the copolymers were studied by using thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC). Optical microscopy (OM) is used for studying the morphology, and then the effects of silicone concentrations, the reflux time, and composition on the phase morphology of P (St‐BA‐HEMA)‐SiO₂ IPNs were discussed. The broadening of the transition region was observed with the prolongation of the reflux time, and the tendency for aggregation of silicone on the surface was observed with Teflon as substrate plate. However, an optically transparent film was easily achieved at higher temperature due to the chemical crosslink and physical entanglement between the two phases of P (St‐BA‐HEMA)‐SiO₂. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Swelling behavior and cell viability of dehydrothermally crosslinked poly(vinyl alcohol) hydrogel grafted with N‐vinyl pyrrolidone or acrylic acid using γ‐radiation

To improve equilibrium water content, dehydrothermally crosslinked poly(vinyl alcohol) (PVA) hydrogel was grafted with N‐vinyl pyrrolidone (NVP) or acrylic acid (AA) monomer using γ‐radiation. Swelling behavior of the grafted hydrogels was studied in phosphate‐buffered saline, and cell viability was evaluated using fibroblast cells from mouse connective tissue. Equilibrium water content of AA‐ and NVP‐grafted PVA hydrogel ranged between 40–60% and 60–80%, respectively, depending on radiation dose and monomer concentration. For maximum degree of swelling, the optimum monomer concentration and radiation dose were 20% by weight and 20 kGy, respectively. Fibroblast cells seeded on NVP‐grafted hydrogel had an extended oval morphology while those seeded on AA‐grafted PVA had a rounded spherical morphology. These results support the use of NVP for grafting PVA to increase swelling and improve cell viability. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2862–2868, 2004     

Preparation and drug‐release behavior of minocycline‐loaded poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] films

In this work, biocompatible hydrogel matrices for wound‐dressing materials and controlled drug‐release systems were prepared from poly[hydroxyethyl methacrylate‐co‐poly(ethylene glycol)–methacrylate] [p(HEMA‐co‐PEG–MA] films via UV‐initiated photopolymerization. The characterization of the hydrogels was conducted with swelling experiments, Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis (differential scanning calorimetry), and contact‐angle studies. The water absorbency of the hydrogel films significantly changed with the change of the medium pH from 4.0 to 7.4. The thermal stability of the copolymer was lowered by an increase in the ratio of poly(ethylene glycol) (PEG) to methacrylate (MA) in the film structure. Contact‐angle measurements on the surface of the p(HEMA‐co‐PEG–MA) films demonstrated that the copolymer gave rise to a significant hydrophilic surface in comparison with the homopolymer of 2‐hydroxyethyl methacrylate (HEMA). The blood protein adsorption was significantly reduced on the surface of the copolymer hydrogels in comparison with the control homopolymer of HEMA. Model antibiotic (i.e., minocycline) release experiments were performed in physiological buffer saline solutions with a continuous flow release system. The amount of minocycline release was shown to be dependent on the HEMA/PEG–MA ratio. The hydrogels have good antifouling properties and therefore are suitable candidates for wound dressing and other tissue engineering applications. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Poly(2‐hydroxyethyl methacrylate) hydrogel: from a brittle material to a nanofilled semi‐interpenetrating polymer network with potential application in wound dressings

In this work we report the photopolymerization of poly(2‐hydroxyethyl methacrylate) (PHEMA) together with a hydrophilic chitosan derivate (carboxymethyl‐chitosan) to yield a semi‐interpenetrating polymer network (semi‐IPN) that was filled with poly(N‐vinylcaprolactam)/poly(ethylene glycol methacrylate) core–shell nanogels in order to enhance the mechanical properties of the resulting hydrogels. The mechanical properties of the nanofilled semi‐IPNs were found to be more suitable for wound dressing applications than the PHEMA hydrogel as described by dynamic mechanical analysis in dry form and submerged in water. This was evidenced by a higher Young's modulus and higher elongation at break in the semi‐IPNs compared to blank PHEMA hydrogels. Furthermore, when the hydrogels were filled with nanogels, there was an elongation at break similar to that of skin with only a slightly lower Young's modulus. © 2019 Society of Chemical Industry     

Biodegradable amphiphiles of grafted poly(lactide) onto 2‐hydroxyethyl methacrylate‐co‐N‐vinylpyrrolidone copolymers as drug carriers

This article describes the synthesis and characterization of 2‐hydroxylethyl methacrylate‐co‐N‐vinylpyrrolidone copolymers, (HEMA‐co‐NVP), via free radical polymerization followed by grafting of poly(lactide) onto (HEMA‐co‐NVP) copolymers, via ring opening polymerization using tin octoate as a catalyst. The copolymers and the grafted copolymers (i.e., amphiphiles) were subjected to sustained release studies using salicylic acid, as a model drug. Characterization of the formed copolymers was performed using ¹H‐NMR, ¹³C‐NMR, FTIR, TGA, DSC, and SEM techniques. Derivative of TGA thermogram was used to determine %hydrophilicity and %hydrophobicity in the grafted and ungrafted copolymers. The SEM morphology revealed porous layers with crispy structure that were most likely due to the presence of poly(lactide) chains. At lower content of poly(lactide) moiety, grafted copolymers showed non‐Fickian diffusion release rate, whereas Fickian diffusion release rate at higher content of poly(lactide) was observed. The increase of poly(lactide) content (i.e., larger %hydrophobicity) in the copolymer increased the drug‐sustainability, due to the consistent but porous amphiphilic degradable structures that allow controllable release of drug in time interval. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Inorganic–organic hybrid materials prepared from zirconium oxo‐clusters and 2‐hydroxyethyl methacrylate

This article describes the preparation and characterization of hybrid materials obtained from the polymerization of vinyl‐substituted zirconium oxo‐clusters [Zr₆O₄(OH)₄(OOCCH₂CHCH₂)₁₂(n‐PrOH)]₂·4(CH₂CHCH₂COOH) (Zr12) and 2‐hydroxyethyl methacrylate (HEMA). The zirconium oxo‐clusters serve as cross‐linking agents, forming a 3D network by means of the copolymerization of their vinylic ligands with HEMA. To optimize the conditions for cross‐linking, the polymerization was monitored with a differential scanning calorimeter. The resulting hybrid materials were also characterized using thermo‐mechanical techniques. There was evidence not only of a greater rigidity above T_g, but also of a better thermal stability for several hybrid formulations than for simple poly‐2‐hydroxyethyl methacrylate. After immersion in water, the hybrids containing 20 or 60% w/w zirconium oxo‐clusters also showed a stable behavior with an equilibrium swelling at about 27 and 18% w/w of water, respectively. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41568.     

Asymmetric membranes fabricated from poly(acrylonitrile‐co‐N‐vinyl‐2‐pyrrolidone)s with excellent biocompatibility

Poly(acrylonitrile‐co‐N ‐vinyl‐2‐pyrrolidone)s (PANCNVPs) show excellent biocompatibility. In this work, PANCNVPs with different contents of N‐vinyl‐2‐pyrrolidone (NVP) were fabricated into asymmetric membranes by the phase inversion method. The surface chemical composition of the resultant membranes was determined by Fourier transform infrared spectroscopy–attenuated total reflection. Field emission scanning electron microscopy was used to examine the surface and cross section morphologies of the membranes. It was found that the morphologies hardly change with the increase of NVP content in PANCNVP, while the deionized water flux increases remarkably and the bovine serum albumin (BSA) retention decreases slightly. Experiment of dynamic BSA solution filtration was carried out to evaluate the antifouling properties of the studied membranes. The relative flux reduction of PANCNVP membrane containing 30.9 wt % of NVP is 25.9%, which is far smaller than that of the polyacrylonitrile membrane (68.8%). Results deduce that this improvement comes from the excellent biocompatibility of NVP moieties instead of the hydrophilicity change, because the water contact angles of these membranes fluctuate between 60 and 70°. Results from the membranes using poly(N‐vinyl‐2‐pyrrolidone) (PVP) as an additive confirm that, to a certain extent, the PANCNVP membranes show the advantages of antifouling compared with the polyacrylonitrile/PVP blending membrane. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4577–4583, 2006     

Hydrogel coating of RVNRL film by electron‐beam irradiation

The tackiness properties of radiation‐vulcanized natural rubber latex (RVNRL) film surfaces coated by various monomers were investigated in order to define the suitable hydrogels which reduce the tackiness of the film. In this context, different types of monomers, namely, N‐vinyl‐2‐pyrrolidone (NVP), N,N‐dimethylaminoethylamide (DMAEA), acrylic acid (AAc), n‐butyl acrylate (n‐BA), and 2‐hydroxyethyl methacrylate (HEMA) as well as the monomer mixtures were tried with varying degrees of success. Coating the RVNRL film with 80% HEMA/20% n‐BA by irradiation at 80 kGy using a low‐energy electron beam gave a remarkable reduction in the surface tackiness of the RVNRL film. Several other attempts were made such as priming the RVNRL film with acid and aluminum sulfate prior to coating, mixing the aluminum sulfate into the monomer mixtures, and dipping the partially wet RVNRL film into the monomer to enhance the wettability of the monomers with the film. The photomicrographs taken illustrate that the decrease in tackiness with the coating is due to the increase of the surface roughness at an 80‐kGy irradiation dose. The studies also revealed that the reduction in the contact angle and the increase in water absorption of the RVNRL film after irradiation are due to the formation of the hydrogel layer. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1421–1428, 1999