Atom transfer radical polymerization of n‐butyl methacrylate in an aqueous dispersed system

Atom transfer radical polymerization of n‐butyl methacrylate (BMA) was conducted in an aqueous dispersed system with different kinds of copper complexes. The partitioning behavior of the copper complexes, including CuCl/4,4′‐di(5‐nonyl)‐2,2′‐bipydine (dNbpy), CuCl₂/dNbpy, CuCl/2,2′‐bipydine (bpy), CuCl₂/bpy, CuCl/bis(N,N′‐dimethylaminoethyl)ether (bde), and CuCl₂/bde between the monomer (BMA), and water was studied in detail with ultraviolet‐visible spectroscopy. The results show that with a less hydrophobic ligand, such as bpy or bde, most of the Cu(I) or the Cu(II) complexes migrated from the BMA phase to the aqueous phase, the atom transfer equilibrium was destroyed, and the polymerization was nearly not controlled; it converted to classical emulsion polymerization. As to the very hydrophobic ligand dNbpy, although the partitioning study of the copper complexes indicated that not all the copper species were restricted to the organic phase, the linear correlation between the molecular weight and the monomer conversion and the narrow polydispersities confirmed that the polymerization was still quite well controlled. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 3175–3179, 2003     

Cobalt(II) and nickel(II) complexes bearing mono(imino)pyridyl and bis(imino)pyridyl ligands: preparation,structure and ethylene polymerization/oligomerization behaviors

BACKGROUND: Ethylene oligomerization is the major industrial process to produce linear α‐olefins. Recently much work has been devoted to late transition metal catalysts used in this process, especially those with 2,6‐bis(imino)pyridyl dihalide ligands. Considering that most work has focused on simple modification to the substituents in imino‐aryl rings based on the symmetric bis(imino)pyridyl framework, here we expand this work to the asymmetric mono(imino)pyridyl ligands. RESULTS: The preparation, structure and ethylene polymerization/oligomerization behavior of series of mono(imino) pyridyl–MCl₂ and bis(imino)pyridyl–MX_n complexes are presented. The systematic studies were focused on the relationship between the catalytic behavior of these complexes for ethylene polymerization/oligomerization and reaction conditions, ligand structures, metal centers and counter‐anions. The influence of the coordination environment on catalyst behavior is also discussed. CONCLUSION: For mono(imino)pyridyl–Co(II) and ? Ni(II) catalysts bearing the Cl^? counter‐anion, good activities ranging from 0.513 × 10⁵ to 1.58 × 10⁵ g polyethylene (mol metal)^?1 h^?1 atm^?1 are afforded, and the most active catalysts are those with methyl in both ortho‐ and para‐positions of the imine N‐aryl ring. For bis(imino)pyridyl–Co(II) and ? Ni(II) catalysts bearing the SO₄^2? and NO₃^? counter‐anions, the low activities for ethylene oligomerization are in sharp contrast to those of their chloride analogues. Copyright © 2009 Society of Chemical Industry     

Polymerization of styrene using bis(β‐ketoamino)nickel(II)/methylaluminoxane catalytic systems

Styrene (St) was polymerized in toluene solution by using bis(β‐ketoamino)nickel(II) complex as the catalyst precursor and methylaluminoxane (MAO) as the cocatalyst. The polymerization conditions, such as Al : Ni ratio, monomer concentration, reaction temperature, and polymerization time, were studied in detail. Both of the bis(β‐ketoamino)nickel(II)/MAO catalytic systems exhibited higher activity for polymerization of styrene, and polymerization gave moderate molecular weight of polystyrene with relatively narrow molecular weight distribution (M_w/M_n < 1.6). The obtained polymer was confirmed to be atactic polystyrene by analyzing the stereo‐triad distributions mm, mr, and rr of aromatic carbon C¹ in NMR spectrum of the polymer. The mechanism of the polymerization was also discussed and a metal–carbon coordination mechanism was proposed. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Synthesis and characterization of poly(vinyl chloride‐co‐vinyl acetate)‐graft‐poly[(meth)acrylates] by atom transfer radical polymerization

The graft polymerization of methyl methacrylate and butyl acrylate onto poly(vinyl chloride‐co‐vinyl acetate) with atom transfer radical polymerization (ATRP) was successfully carried out with copper(I) thiocyanate/N,N,N′,N′,N″‐pentamethyldiethylenetriamine and copper(I) chloride/2,2′‐bipyridine as catalysts in the solvent N,N‐dimethylformamide. For methyl methacrylate, a kinetic plot of ln([M]₀/[M]) (where [M]₀ is the initial monomer concentration and [M] is the monomer concentration) versus time for the graft polymerization was almost linear, and the molecular weight of the graft copolymer increased with increasing conversion, this being typical for ATRP. The formation of the graft polymer was confirmed with gel permeation chromatography, ¹H‐NMR, and Fourier transform infrared spectroscopy. The glass‐transition temperature of the copolymer increased with the concentration of methyl methacrylate. The graft copolymer was hydrolyzed, and its swelling capacity was measured. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 183–189, 2005     

Synthesis,characterization, and catalytic behavior of copper complexes with fluorosubstituted β‐ketoimine ligands

A series of β‐ketoimine ligands with various fluorine substitutions on the N‐aryl ring and the corresponding copper complexes were synthesized. The fluorosubstituents exerted significant effects on the structures and catalytic activities of the copper complexes. X‐ray diffraction revealed that the copper(II) central ions were coordinated by two trans‐oriented β‐ketoimino ligands with delocalized double bonds. Complex 2b (with mono‐o‐fluorosubstitution on the N‐aryl moiety) adopted a central symmetric square planar structure, whereas complex 2f (with bis‐o‐fluorosubstitution) had a distorted square planar structure with a dihedral angle of 28.2°. The Cu? N bond length in 2f was appreciably shorter than that in 2b . When activated by modified methylaluminoxane, the copper complexes effectively polymerized methyl acrylate. Furthermore, substitution with more fluorine atoms resulted in a higher activity. The catalytic activity of the pentafluorosubstituted complex 2h reached 57.5 kg (mol of Cu)^?1·h^?1 under optimized conditions; this was the highest value reported up to this point for copper complexes in acrylic monomer polymerization. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 41178.     

Synthesis of linear low density polyethylene (LLDPE) by in situ copolymerization with novel cobalt and zirconium catalysts

New cobalt catalysts {[2,6‐(CH₃C=NAr)₂C₅H₃N]CoCl₂} (Ar=2‐methyl‐4‐methoxyphenyl, 1 ) and (Ar=2,4‐dimethylphenyl,2) were synthesized and found to exhibit good selectivity for α‐olefins with methylaluminoxane (MAO) as co‐catalyst. With only ethylene as the feed monomer cobalt catalysts 1 or 2 can be coupled with zirconium catalyst Dichloro [rac‐ethylenebis(indenyl)]Zirconium (IV) rac‐EtInd₂ZrCl₂ ( 3 ) to produce linear low density polyethylene by in situ polymerization. Spectra of resulting materials exhibit ethyl, butyl and long‐chain branches in the backbone of polyethylene. The ratio of Co/Zr and Δt, which is defined as the interval between introductions of two catalysts into the reactor, influenced catalytic activity and the resulting materials greatly. Compatibility and complementary behaviour of different catalysts proved to be two most important factors for in situ copolymerization. Copyright © 2003 Society of Chemical Industry     

Ethylene homopolymerization by novel Ziegler Natta-type catalytic systems obtained by oxidative addition of salicylaldimine ligands to bis(1,5-cyclooctadiene)nickel(0) and methylalumoxane

A new series of monochelate nickel(II) catalysts, obtained by oxidative addition of salicylaldimine ligands to bis(1,5-cyclooctadiene)nickel(0), was reported for the polymerization of ethylene (E). Almost stoichiometric amounts of MAO as co-catalyst were necessary in order to activate these systems, the productivity being dependent on the Al/Ni molar ratio.The activity and the average molecular weight of the resulting PE were mainly influenced by the nature of the substituents on both the phenolate moiety and on the N-aryl ring. In particular, when two nitro groups are present on the 3,5-positions of phenolate moiety high activity (up to 120,000 g PE/(mol Ni×h)) was observed.The obtained PE samples showed a high linearity and average molecular weight in the 100,000-500,000 Da range.The obtained results seem to suggest that, at least for these catalysts based on salicylaldiminate ligands, the presence of electron withdrawing nitro groups on the phenoxy moiety plays a more important role with respect to the bulkiness of the substituents on both the ortho positions of the N-aryl group in order to prevent chain transfer and thus enhance the molecular weight of the polymer.     

The effect of aluminum alkyls and BHT‐H on reaction kinetics of silica supported metallocenes and polymer properties in slurry phase ethylene polymerization

In slurry and gas phase catalytic ethylene polymerization processes, aluminum alkyl (AlR₃) compounds are usually present inside the reactor and their role either as co‐catalyst or scavenger is of considerable importance. Silica supported metallocene/methyl aluminoxane (MAO) catalysts show specific interactions with AlR₃ compounds. Therefore, this study shows an attempt to analyze and compare the effect of concentration as well as type of commonly used AlR₃ on slurry phase ethylene homopolymerization kinetics of silica supported (n‐BuCp)₂ZrCl₂/MAO catalyst. The obtained results indicate that the lower the concentration of smaller AlR₃ compounds, the higher the instantaneous catalytic activity. Concerning the polymer particle size distributions, a rise in fines generation has been observed with increasing AlR₃ content inside the reactor. Finally, it has been shown that the addition of 2,6‐di‐tert‐butyl‐4‐methylphenol (a substituted phenol) into the reactor containing AlR₃ reduces the influence of AlR₃ compounds on the reaction kinetics of silica supported metallocene/MAO catalysts. Polyethylene properties remain similar in all the studied scenarios. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2018 , 135, 45670.     

Morphologies and dynamic mechanical properties of core‐shell emulsifier‐free latexes and their copolymers for P(BA/MMA)/P(MMA/BA) and P(BA/MMA)/PSt systems in the presence of AHPS

Different poly(methyl methacrylate/n‐butyl acrylate)/poly(n‐butyl acrylate/methyl methacrylate) [P(BA/MMA)/P(MMA/BA)] and poly(n‐butyl acrylate/methyl methacrylate)/polystyrene [P(BA/MMA)/PSt] core‐shell structured latexes were prepared by emulsifier‐free emulsion polymerization in the presence of hydrophilic monomer 3‐allyloxy‐2‐hydroxyl‐propanesulfonic salt (AHPS). The particle morphologies of the final latexes and dynamic mechanical properties of the copolymers from final latexes were investigated in detail. With the addition of AHPS, a latex of stable and high‐solid content (60 wt %) was prepared. The diameters of the latex particles are ～0.26 μm for the P(BA/MMA)/P(MMA/BA) system and 0.22–0.24 μm for the P(BA/MMA)/PSt system. All copolymers from the final latexes are two‐phase structure polymers, shown as two glass transition temperatures (T_gs) on dynamic mechanical analysis spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3078–3084, 2002     

Preparation of ethylene/1‐octene copolymers from ethylene stock with tandem catalytic system

Tandem catalysis offers a novel synthetic route to the production of linear low‐density polyethylene. This article reports the use of homogeneous tandem catalytic systems for the synthesis of ethylene/1‐octene copolymers from ethylene stock as the sole monomer. The reported catalytic systems involving a highly selective, bis(diphenylphosphino)cyclohexylamine/Cr(acac)₃/methylaluminoxane (MAO) catalytic systems for the synthesis of 1‐hexene and 1‐octene, and a copolymerization metallocene catalyst, rac‐Et(Ind)₂ZrCl₂/MAO for the synthesis of ethylene/1‐octene copolymer. Analysis by means of DSC, GPC, and ¹³C‐NMR suggests that copolymers of 1‐hexene and ethylene and copolymers of 1‐octene and ethylene are produced with significant selectivity towards 1‐hexene and 1‐octene as comonomers incorporated into the polymer backbone respectively. We have demonstrated that, by the simple manipulation of the catalyst molar ratio and polymerization conditions, a series of branched polyethylenes with melting temperatures of 101.1–134.1°C and density of 0.922–0.950 g cm^?3 can be efficiently produced. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Copolymerization of ethylene and propylene catalyzed by novel magnesium chloride supported,vanadium‐based catalysts

Two novel magnesium chloride supported, vanadium‐based Ziegler–Natta catalysts with 9,9‐bis(methoxymethyl)fluorene and di‐i‐butyl phthalate as internal donors were prepared and used in the copolymerization of ethylene and propylene. The catalytic behaviors of these catalysts were investigated and compared with those of traditional magnesium chloride supported, vanadium‐based catalysts without internal donors. Differential scanning calorimetry, gel permeation chromatography, and ¹³C‐NMR spectroscopy analysis were performed to characterize the melting temperatures, molecular weights, and molecular weight distributions as well as structures and compositions of the products. The copolymerization kinetic results indicated that the novel catalyst with 9,9‐bis(methoxymethyl)fluorene as an internal donor had the highest catalytic activity and optimal kinetic behavior in ethylene–propylene copolymerization with an ethylene/propylene molar ratio of 44/56. Low‐crystallinity and high‐molecular‐weight copolymers were obtained with these novel magnesium chloride supported, vanadium‐based catalysts. The reactivity ratio data indicated that the catalytic systems had a tendency to produce random ethylene–propylene copolymers. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Ethylene polymerization with homogeneous and heterogeneous catalysts based on bis(4‐fluorophenyl)methyl‐substituted bis(imino)pyridyliron complexes

A series of bis(4‐fluorophenyl)methyl‐substituted bis(imino)pyridyliron chloride complexes were immobilized on oxide supports. The kinetics of ethylene polymerization by both homogeneous and heterogeneous systems was followed, the catalysts mostly demonstrating high activities. The effect of the ligands nature and reaction conditions on the catalytic activities and molecular weights of the resultant polyethylenes was examined. In contrast to homogeneous systems, the supported iron complexes were found to exhibit high and stable activity upon activation with triisobutyl aluminium, producing high‐molecular‐weight polyethylene with good morphology. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42674.     

Influence of supported vanadium catalyst on ethylene polymerization reactions

BACKGROUND: In the research area of homogeneous Ziegler–Natta olefin polymerization, classic vanadium catalyst systems have shown a number of favourable performances. These catalysts are useful for (i) the preparation of high molecular weight polymers with narrow molecular weight distributions, (ii) the preparation of ethylene/R‐olefin copolymers with high R‐olefin incorporation and (iii) the preparation of syndiotactic polypropylenes. In view of the above merits of vanadium‐based catalysts for polymerization reactions, the development of well‐defined single‐site vanadium catalysts for polymerization reactions is presently an extremely important industrial goal. The main aim of this work was the synthesis and characterization of a heterogeneous low‐coordinate non‐metallocene (phenyl)imido vanadium catalyst, V(NAr)Cl₃, and its utility for ethylene polymerization. RESULTS: Imido vanadium complex V(NAr)Cl₃ was synthesized and immobilized onto a series of inorganic supports: SiO₂, methylaluminoxane (MAO)‐modified SiO₂ (4.5 and 23 wt% Al/SiO₂), SiO₂? Al₂O₃, MgCl₂, MCM‐41 and MgO. Metal contents on the supported catalysts determined by X‐ray fluorescence spectroscopy remained between 0.050 and 0.100 mmol V g^?1 support. Thermal stability of the catalysts was determined by differential scanning calorimetry (DSC). Characterization of polyethylene was done by gel permeation chromatography and DSC. All catalyst systems were found to be active in ethylene polymerization in the presence of MAO or triisobutylaluminium/MAO mixture (Al/V = 1000). Catalyst activity was found to depend on the support nature, being between 7.5 and 80.0 kg PE (mol V)^?1 h^?1. Finally, all catalyst systems were found to be reusable for up to three cycles. CONCLUSION: Best results were observed in the case of silica as support. Acid or basic supports afforded less active systems. In situ immobilization led to higher catalyst activity. The resulting polyethylenes in all experiments had ultrahigh molecular weight. Finally, this work explains the synthesis and characterization of reusable supported novel vanadium catalysts, which are useful in the synthesis of very high molecular weight ethylene polymers. Copyright © 2007 Society of Chemical Industry     

Ethylene polymerization by phenylenedimethylene‐bridged homobinuclear zirconocene/methylaluminoxane systems

In the presence of methylaluminoxane (MAO), ethylene polymerization was successfully performed with homobinuclear zirconocene complexes {[(C₅H₅)ZrCl₂](C₅H₄CH₂ C₆H₄CH₂C₅H₄)[(C₅H₅)ZrCl₂]; 3o , 4m , and 5p }, which were prepared conveniently by the reaction of disodium(phenylenedimethylene)dicyclopentadienide [C₆H₄(CH₂C₅H₄Na)₂] with 2 equiv of (N⁵‐Cyclopentadienyl)trichlorozirconium dimethoxyethane (CpZrCl₃(DME)) in tetrahydrofuran and characterized by ¹H‐NMR and elemental analysis. The effects of the polymerization parameters, such as the temperature, time, concentration of the catalyst, MAO/catalyst molar ratio, and isomeric difference of the homobinuclear metallocene complexes 3o , 4m , and 5p were studied in detail. The results showed that all three catalytic systems had moderate activities in ethylene polymerization and afforded polyethylene with relatively broad polydispersities. The catalytic activity of 4m was somewhat higher than that of 3o and 5p but lower than that of 4,4′‐bis(methylene)biphenylene‐bridged zirconocene catalysts; this indicated that the distance between the two metal centers was too short in comparison with a 4,4′‐bis(methylene)biphenylene bridge to increase the catalytic activity. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Asymmetric Hydrogenation Catalyzed by (S,S)‐R‐BisPast;‐Rh and (R,R)‐R‐MiniPHOS Complexes: Scope,Limitations, and Mechanism

A new class of chiral C₂‐symmetric bis(trialkyl)phosphine ligands has been prepared and used in Rh(I)‐catalyzed asymmetric hydrogenation reactions. The ligands, 1,2‐bis(alkylmethylphosphino)ethanes 1a‐g (abbreviated as BisP*, alkyl = t‐butyl, 1‐adamantyl, 1‐methylcyclohexyl, 1,1‐diethylpropyl, cyclopentyl, cyclohexyl, isopropyl) and 1,2‐bis(alkylmethylphosphino)methanes 2a‐d (abbreviated as MiniPHOS, alkyl = t‐butyl, cyclohexyl, isopropyl, phenyl) are prepared by a simple synthetic approach based on the air‐stable phosphine–boranes. These new ligands give the corresponding Rh(I) complexes, which are effective catalytic precursors for the asymmetric hydrogenation of a representative series of dehydroamino acids and itaconic acid derivatives. Enantioselectivities observed in these hydrogenations are universally high and in many cases exceed 99%. X‐Ray characterization of four precatalysts, study of the pressure effects, deuteration experiments, and characterization of the wide series of intermediates in the catalytic cycle are used for the discussion of the possible correlation between the structure of the catalysts and the outcome of the catalytic asymmetric hydrogenation.     

Syndioselective propylene polymerization: Comparison of Me2C(Cp)(Flu)ZrMe2 with Et(Cp)(Flu)ZrMe2

The kinetics and stereochemical control of propylene polymerization initiated by syndiospecific isopropylidene(1-η⁵-cyclopentadienyl)(1-η⁵-fluorenyl)-dimethylzirconium–methyl aluminoxane (1/MAO) and (1-fluorenyl-2-cyclopentadienylethane)-dimethylzirconium–MAO (2/MAO) were investigated. The influence of MAO concentration and polymerization temperature (T_p) on polymerization kinetics and polypropylene properties, such as molecular weight, molecular weight distribution (MWD), and stereoselectivity, have been studied in detail. The activity of both catalytic systems is very sensitive to the concentration of MAO. The 1/MAO and 2/MAO catalysts record maximum activity when [Al]/[Zr] ratio is around 1300 and 2500, respectively. The activity and the degree of stereochemical control are also sensitive to T_p. The 2/MAO catalyst is much more thermally stable than 1/MAO catalyst; the former shows maximum activity at 80°C, whereas the latter shows maximum activity at 20°C. The cationic active species generated by 2/MAO is not so stereorigid as those by 1/MAO so that 2/MAO catalyst produces sPP of broad MWD (4.43–6.38) and low syndiospecificity at high T_p. When T_p is above 50°C, 2/MAO catalyst produces completely atactic polypropylene. The results of fractionation of sPP samples produced by 1/MAO and 2/MAO demonstrate that 1/MAO catalyst is characterized by uniform active sites, but 2/MAO is characterized by multiple active sites. © 1998 John Wiley & Sons, Inc. J. Appl. Polym. Sci. 70: 973–983, 1998     

Lanthanide(II) amide complexes: Efficient initiators for the living polymerization of methyl methacrylate

Lanthanide(II) complexes supported by amido ligands, [(C₆H₅)(Me₃Si)N]₂Ln(DME)₂ [Ln = Sm ( 1 ) or Yb ( 2 ); DME = 1,2‐dimethoxyethane] and [(C₆H₃? ⁱPr₂‐2,6)(Me₃Si)N]₂Ln(THF)₂ [Ln = Sm ( 3 ) or Yb ( 4 ); THF = tetrahydrofuran], were found to initiate the polymerization of methyl methacrylate (MMA) as efficient single‐component initiators (in toluene for 3 and 4 and in toluene with a small amount of THF for 1 and 2 ) to produce syndiotactic polymers. The catalytic behavior was highly dependent on both the amido ligand and the polymerization temperature. Initiators 3 and 4 initiated MMA polymerization over a wide range of temperatures (20°C to ?40°C), whereas the polymerization with 1 and 2 proceeded smoothly only at low temperatures (≤0°C). The kinetic behavior and some features of the polymerizations of MMA initiated by 3 and 4 were studied at ?40°C. The polymerization rate was first‐order with the monomer concentration. The molar masses of the polymers increased linearly with the increase in the polymer yields, whereas the molar mass distributions remained narrow and unchanged throughout the polymerization; this indicated that these systems had living character. A polymerization mechanism initiated by bimetallic bisenolate formed in situ was proposed. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

(Co)polymerization of ethylene via nonmetallocene catalysts with diphenyl phosphoroso schiff‐base ligand

A series of novel nonmetallocene catalysts [N, O, P] with diphenyl phosphoroso ligands were synthesized by the treatment of phthaldialdehyde, substituted phenols, chlorodiphenyl phosphine with metal halides of TiCl₄ and ZrCl₄. The catalyst microstructure was characterized by ¹H NMR and EA. After activated by methylaluminoxane (MAO), these [N, O, P] catalysts were utilized to catalyze the polymerization of ethylene and the copolymerization of ethylene with 1‐octene. The results indicated that the obtained catalysts were highly efficient for ethylene polymerization and ethylene/1‐octene copolymerization. Structures and properties of the obtained polymers were measured by WAXD, DSC, GPC, and ¹³C NMR. The results indicated that polyethylene catalyzed by Cat. 3 possessed the highest weight‐average molecular weight of 1.025 × 10⁶ g/mol and the highest melting point of 136.3°C. The copolymer of ethylene/1‐octene catalyzed by Cat. 1 exhibited the highest 1‐octene incorporation content of 0.63 mol %. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42225.     

Controlled synthesis of low‐molecular‐weight polyethylene waxes by titanium–biphenolate–ethylaluminum sesquichloride based catalyst systems

Soluble complexes of titanium(IV) bearing sterically hindered biphenols, such as biphenol, 1,1′‐methylene di‐2‐naphthol, 2,2′‐methylene bis(4‐chlorophenol), 2,2′‐methylene bis(6‐tert‐butyl‐4‐ethyl phenol), and 2,2′ ethylidene bis(4,6‐di‐tert‐butyl phenol), were prepared and characterized. These catalyst precursors, formulated as [Ti(O∧O)X₂], were active in the polymerization of ethylene at high temperatures in combination with ethylaluminum sesquichloride as a cocatalyst. The ultra‐low‐molecular‐weight polyethylenes (PEs) were linear and crystalline and displayed narrow polydispersities. The catalytic polymerization leading to PE waxes in this reaction exhibited unique properties that have potential applications in surface coatings and adhesive formulations. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1531–1539, 2007     

Kinetics and mechanism of the charge‐transfer polymerization of methyl methacrylate initiated with n‐butyl amine and carbon tetrachloride catalyzed by palladium dichloride

We studied the kinetics and mechanism of the charge‐transfer polymerization of methyl methacrylate (MMA) initiated with n‐butyl amine (BA) and carbon tetrachloride (CCl₄) catalyzed by palladium dichloride (PdCl₂ or Pd^II) in a dimethyl sulfoxide medium by using a dilatometric technique at 60°C. The rate of polymerization (R_p) was a function of [MMA], [BA], [CCl₄], and [Pd^II]. The kinetic data indicated a mechanism involving the possible participation of the charge‐transfer complex formed between the {BA–Pd^II} complex and CCl₄ or monomer in the polymerization of MMA. In the absence of either CCl₄ or BA, no polymerization of MMA was observed under these experimental conditions. R_p was inhibited by hydroquinone; this suggested a free‐radical initiation. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012