On the encapsulation of natural pesticide using polyvinyl alcohol/alginate–montmorillonite nanocomposite for controlled release application

A representative pesticide, NeemAzal was encapsulated into polyvinyl alcohol/alginate‐montmorillonite (PVA/Alg‐MMT) nanocomposite by cross‐linking with glutaraldehyde. Different formulations of capsule beads containing NeemAzal were prepared with different concentration of materials. Evidence of cross‐linking of PVA and Alg was obtained by comparison of the Fourier transform infrared spectra of the initial substrates and capsule beads. X‐ray diffraction and transmission electron microscopy techniques confirmed the intercalated structure of capsule bead nanocomposites. In addition the swelling behavior of capsule beads was investigated. Results showed that swelling ratio of capsule beads decreases with introduction of MMT as well as increase of PVA content in capsule bead formulations. The release characteristics of NeemAzal from capsule beads were monitored using UV–visible spectrophotometer in distilled water. The addition of sodium MMT to these formulations was found to have a profound inhibitory effect on the release of NeemAzal. Furthermore, the release data were fitted to several empirical equations to estimate the kinetic parameters. The NeemAzal encapsulated PVA/Alg‐MMT nanocomposite capsule beads, designed and discussed in this work, have the potential for controlled release of pesticide. POLYM. ENG. SCI., 54:2707–2714, 2014. © 2013 Society of Plastics Engineers     

Preparation and characterization of interpenetrating network beads of poly(vinyl alcohol)‐grafted‐poly(acrylamide) with sodium alginate and their controlled release characteristics for cypermethrin pesticide

Interpenetrating network polymeric beads of poly(vinyl alcohol)‐grafted‐acrylamide with sodium alginate have been prepared by crosslinking with glutaraldehyde. Cypermethrin, a widely used pesticide, was loaded with 80% efficiency in these hydrogel beads. The beads were characterized by Fourier transform infrared spectroscopy to confirm the grafting. Scanning electron microscopy was used to know the morphology of the beads. Equilibrium swelling experiments indicated that swelling of the beads decreased with an increase in crosslinking. The in vitro release studies were performed under static conditions and the release data have been fitted to an empirical relation to estimate the transport parameters. The diffusion coefficients have been calculated for the transport of pesticide through the polymeric beads using the initial time approximation method. These values showed decrease with increasing crosslinking as well as increasing pesticide loading. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 552–560, 2002; DOI 10.1002/app.10306     

Controlled release formulations of carbaryl based on copper alginate,barium alginate,and alginic acid beads

A controlled release system for reducing environmental impact was produced by encapsulating the pesticide carbaryl (Carb) in the alginate beads. The various bead formulations were prepared by using sodium alginate (NaAlg) as a polymer, CuCl₂, BaCl₂ as a crosslinking agent, and HCl as a linking agent. The surface morphology of prepared beads was characterized with scanning electron microscopy (SEM). SEM confirmed the spherical nature and surface morphology of the particles. Bead characteristics, such as Carb entrapment efficiency, particle size, swelling degree, and Carb release kinetics, were determined. The effects of crosslinker or linker concentration, type, and carbaryl/sodium alginate (Carb/NaAlg) ratio on Carb release from the beads were investigated for 20 days at 25°C. It was observed that Carb release from the beads increased with the increase of Carb/NaAlg ratio whereas decreased with the increase of crosslinker concentration. At the end of 20 days, the Carb release from alginic acid beads was found to be higher than that of copper alginate (Cu‐Alg) and barium alginate (Ba‐Alg) beads. The swelling measurements of the beads supported the release results. Release kinetics were described by Fickian and non‐Fickian approaches. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4245–4253, 2006     

Development of a controlled release neem capsule with a sodium alginate matrix,crosslinked by glutaraldehyde and coated with natural rubber

At present, the use of huge quantities of synthetic pesticides in conventional agriculture has lead to some major environmental problems. Natural pesticide are now being developed to avoid such problems. Neem (Azadirachtin A) seed oil hereafter designated as neem Aza-A, is one such natural pesticide known to be a powerful insect antifeedant and growth-regulating substance yet limited in application because of its rapid degradation in the environment. Therefore, encapsulation of neem Aza-A within membranes to control its release and improve its stability in the environment may improve its effectiveness. Controlling the release of the pesticide was achieved by utilization of glutaraldehyde–alginate gel capsules modified by coating with a natural rubber (NR) layer. The optimization of the properties of the neem Aza-A containing beads was achieved by changing variables such as the extent of crosslinking, the amount of loading and NR layer. The SEM data indicated that the walls of the beads are smooth and nonporous. The swelling results indicated that swelling of the polymeric beads decreased with increasing exposure time to glutaraldehyde and reduced the rate of release of the pesticide. The data on the rate of release of neem Aza-A from the differently prepared capsules into an aqueous environment was analyzed by HPLC and fitted into an empirical equation to estimate the kinetic parameter. The degree of release of neem Aza-A from capsules was controlled by their condition of formation.     

Preparation,characterization, and salicylic acid release behavior of chitosan/poly(vinyl alcohol) blend microspheres

Blend microspheres of chitosan (CS) with poly(vinyl alcohol) (PVA) were prepared as candidates for oral delivery system. CS/PVA microspheres containing salicylic acid (SA), as a model drug, were obtained using the coacervation‐phase separation method, induced by addition of a nonsolvent (sodium hydroxide solution) and then crosslinked with glutaraldehyde (GA) as a crosslinking agent. The microspheres were characterized by Fourier transform infrared spectroscopy, differential scanning calorimetry (DSC), and scanning electron microscopy. Percentage entrapment efficiency, particle size, and equilibrium swelling degree of the microsphere formulations were determined. The results indicated that these parameters were changed by preparation conditions of the microspheres. Effects of variables such as CS/PVA ratio, pH, crosslinker concentration, and drug/polymer (d/p) ratio on the release of SA were studied at three different pH values (1.2, 6.8, and 7.4) at 37°C. It was observed that SA release from the microspheres increased with decreasing CS/PVA ratio and d/p ratio whereas it decreased with the increase in the extent of crosslinking. It may also be noted that drug release was much higher at pH 1.2 than that of at pH 6.8 and 7.4. The highest SA release percentage was obtained as 100% for the microspheres prepared with PVA/CS ratio of 1/2, d/p ratio of 1/2, exposure time to GA of 5 min, and concentration of GA 1.5% at the end of 6 h. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Polymeric sodium alginate interpenetrating network beads for the controlled release of chlorpyrifos

Novel polymeric sodium alginate (Na‐Alg) interpenetrating network (IPN) beads have been prepared by crosslinking Na‐Alg blend with gelatin (GE) or egg albumin (EA) using glutaraldehyde (GA) as the crosslinking agent. These beads were used for the controlled release of chlorpyrifos. The swelling experiments were performed in water at different temperatures, and these data were used to calculate the molecular mass (M_C) between crosslinks as well as diffusion coefficients. Diffusion coefficients calculated from desorption data were lower by about two orders of magnitude than those calculated from sorption results. Higher values of M_C were obtained for the gelatin‐based IPNs than the neat Na‐Alg and egg albumin‐based matrices. Size of the beads did not vary significantly either by the network or by increasing the exposure time to the crosslinking agent. The scanning electron microscopy (SEM) was used to understand the surface characteristics of the beads. Differential scanning calorimetry (DSC) indicated a molecular level dispersion of chlorpyrifos in the polymer matrix. The percentage entrapment efficiency showed a dependence on the type of network polymer as well as time of exposure to the crosslinking agent. The encapsulation efficiency decreased with an increase in time of exposure to the crosslinking agent. In vitro release experiments have been performed to follow the release kinetics of chlorpyrifos from the matrices. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 911–918, 2002     

Evaluation of swelling capacity of poly(vinyl alcohol) fibrous mats dealt with polyoxometalate containing vanadium

Poly(vinyl alcohol) (PVA) fibrous mats dealt with polyoxometalate containing vanadium were prepared by electrospinning method. The fibrous mats were characterized by infrared spectra, X‐ray powder diffraction patterns, and scanning electron microscopy photographs. The results showed that PVA could combine with polyoxometalate by intermolecular H‐bonding. The studies of the diameter distributions indicated that the average diameter of the fibrous mats was about 260–420 nm. The effects of the polyoxometalate content, electrode potential, temperature, and time on the swelling capacity of the fibrous mats in water were investigated. The existence of the polyoxometalate containing vanadium was advantaged for the crosslinking of PVA fibrous mats. The swelling degree of PVA fibrous mats containing polyoxometalate dealt with 383 K for 18 h approached zero in water. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Controlled release study of carbaryl insecticide from calcium alginate and nickel alginate hydrogel beads

In this study, controlled release formulations for reducing environmental impact of pesticides have been produced by encapsulating as a model pesticide carbaryl (Carb) in the alginate beads. The various hydrogel bead formulations were prepared by the ionotropic crosslinking of sodium alginate (NaAlg) with calcium and nickel ions. The surface morphology of prepared beads was characterized with scanning electron microscopy (SEM). SEM confirmed the spherical nature and surface morphology of the particles. Bead characteristics, such as carbaryl entrapment efficiency, particle size, equilibrium swelling degree, and carbaryl release kinetics, were determined. The effects of the bead preparation conditions such as crosslinker concentration and type, carbaryl/sodium alginate (Carb/NaAlg) ratio and percentage of NaAlg on the carbaryl release from the calcium alginate (Ca‐Alg) and nickel alginate (Ni‐Alg) beads were investigated in distilled water at 25°C. It was observed that carbaryl release from the Ca‐Alg beads was slower than that of Ni‐Alg beads. The release results indicated that carbaryl release from both of the Ca‐Alg and Ni‐Alg beads decreases with the increasing crosslinker concentration, Carb/NaAlg ratio and percentage of NaAlg. The highest carbaryl release was found to be 100% for the Ni‐Alg beads at 3 days whereas the lowest carbaryl release was found to be 67% for the Ca‐Alg beads at 21 days. The swelling measurements of the beads were also in consistent with the carbaryl release results. The carbaryl release from most of the bead formulations followed Case II transport. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

Effects of crosslinking degree of poly(vinyl alcohol) hydrogel in aqueous solution: kinetics and mechanism of copper(II) adsorption

Recently, a renewed interest in hydrogels for heavy metal removal of wastewater has been growing because of embarking opportunities in industrial applications. One of the most interesting hydrogels potentially used as absorbent is poly(vinyl alcohol) (PVA), owing to its biocompatibility. In this study, the adsorption capacity of copper(II) ion onto PVA hydrogel (PVAH) adsorbents with different crosslinking degrees of 1, 3 and 5 % from aqueous solution was investigated. The PVAH adsorbents were prepared from PVA, using glutaraldehyde as a crosslinking agent. Their properties were determined by Fourier transform infrared spectroscopy, scanning electron microscopy (SEM), and water absorption measurement. The results showed that PVA was crosslinked with glutaraldehyde. It exhibited an equilibrium swelling ratio in the range of 195–250 %, depending on the crosslinking degree with different PVAH structures defined from SEM micrographs. The adsorption capacity of copper(II) ion onto PVAH adsorbents was investigated and found that higher crosslinking degree decreased the absorption capacity. This behavior is due to the decrease in reactive sites, resulting in the decrease of interaction between copper(II) ion and PVA. Besides, the adsorption capacity also depended on contact time, pH and temperature. The adsorption process followed pseudo-second-order kinetic, having a 0.99 correlation coefficient. Intraparticle diffusion was confirmed by the adsorption mechanism controlled by particle and film diffusions.     

Dual‐responsive semi‐interpenetrating network beads based on calcium alginate/poly(N‐isopropylacrylamide)/poly(sodium acrylate) for sustained drug release

To improve the mechanical strength of natural hydrogels and to obtain a sustained drug‐delivery device, temperature‐/pH‐sensitive hydrogel beads composed of calcium alginate (Ca‐alginate) and poly(N‐isopropylacrylamide) (PNIPAAm) were prepared in the presence of poly(sodium acrylate) (PAANa) with ultrahigh molecular weight (M_η ≥ 1.0 × 10⁷) as a strengthening agent. The influence of PAANa content on the properties, including the beads stability, swelling, and drug‐release behaviors, of the hydrogels was evaluated. Scanning electron microscopy and oscillation experiments were used to analyze the structure and mechanical stability of the hydrogel beads, respectively. The results show that stability of the obtained Ca‐alginate/PNIPAAm hydrogel beads strengthened by PAANa the alginate/poly(N‐isopropyl acrylamide) hydrogel bead (SANBs) was significantly improved compared to that of the beads without PAANa (NANBs) at pH 7.4. The swelling behavior and drug‐release capability of the SANBs were markedly dependent on the PAANa content and on the environmental temperature and pH. The bead sample with a higher percentage of PAANa exhibited a lower swelling rate and slower drug release. The drug release profiles from SANBs were further studied in simulated intestinal fluid, and the results demonstrated here suggest that SANBs could serve as a potential candidate for controlled drug delivery in vivo. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis and characterization of suspension-polymerized poly(vinyl alcohol) beads with core–shell structure

A new method of preparing large spherical PVA beads (up to 1.5 mm diameter) with a core-shell structure has been developed. This involves a stepwise saponification of suspension polymerized PVAc beads, followed by a stepwise crosslinking of the PVA core and shell with glutaraldehyde. The resulting composite PVA beads have thin, highly crosslinked outer shells and lightly to moderately crosslinked inner cores of different degrees of crosslinking. In addition to the characterization of structural parameters, the kinetics of solute release and the swelling dynamics, including the transient dimensional changes, have been investigated using proxyphylline as a model compound. © 1992 John Wiley & Sons, Inc.     

Poly(vinyl alcohol)‐based polymeric membrane: Preparation and tensile properties

A series of poly(vinyl alcohol) (PVA)‐based single‐layer organic polymeric membranes were prepared via the crosslinking of PVA with different amounts of formaldehyde. Meanwhile, for comparison, both a three‐layer organic polymeric membrane and a hybrid composite membrane were also prepared by the layer‐upon‐layer method. Their thermal stability and tensile properties were investigated to examine the effect of crosslinking on the membrane performances. Thermogravimetric analysis and differential scanning calorimetry thermal analyses showed that the thermal degradation temperature of the single‐layer crosslinked membrane C reached up to 325°C. Tensile testing indicated that the three‐layer organic polymeric membrane E had excellent tensile strength among these single‐layer and three‐layer membranes. The swelling properties revealed that the swelling degree value of these membranes decreased with an increase in methanol concentration; this suggests that they were not easily swollen by the methanol solution, which is meaningful for the separation of organic mixtures. Field emission scanning electron microscopy images exhibited that the crosslinking of functional groups impacted their structures and confirmed that their mechanical properties were related to their structures. These findings suggest that the crosslinking of functional groups is an effective method for adjusting the tensile strength of PVA‐based organic polymeric membranes and related hybrid composite membranes. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Controlled release of insecticide carbaryl from sodium alginate,sodium alginate/gelatin,and sodium alginate/sodium carboxymethyl cellulose blend beads crosslinked with glutaraldehyde

Interpenetrating network polymeric beads of sodium alginate (NaAlg) and its blend with gelatin (gels) or sodium carboxymethyl cellulose (NaCMC) have been prepared by crosslinking with a common crosslinking agent, glutaraldehyde (GA), for the release of insecticide carbaryl (Carb). The prepared beads were characterized by Fourier transform infrared spectroscopy and scanning electron microscopy. Scanning electron microscopy confirmed the spherical nature and surface morphology of the particles. Bead characteristics, such as carbaryl entrapment efficiency, particle size, equilibrium swelling degree, and carbaryl release kinetics, were determined. The effects of the preparation conditions, such as Carb/NaAlg ratio, time of exposure to GA, blend ratio, and temperature of release medium on the carbaryl release, were investigated for 25 days at 25°C. It was observed that the carbaryl release decreased with increase in crosslinking of network, while it increased with increase in Carb/NaAlg ratio and temperature. The release of carbaryl also increased with increase in Gel or NaCMC content in the blend beads. The highest carbaryl release was found to be 100%, for the beads that were prepared with 1 : 1 NaAlg/Gel at 16 days. The diffusion coefficients have been calculated for the transport of insecticide through the polymeric beads, using initial time approximation method. These values were also consistent with the carbaryl release data. The carbaryl release from most of the bead formulations followed the Fickian trend. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 99: 1310–1319, 2006     

Preparation and characterization of a bioadhesive with poly (vinyl alcohol) crosslinking agent

Synthetic adhesives containing 3,4‐dihydroxy‐L‐phenylalanine and its derivatives have strong adhesion strength and good biocompatibility, which make them prime candidates for adhesives or bioadhesives applications. In this study, a new photocurable poly (vinyl alcohol) (UV‐PVA) derivative was prepared and used as crosslinking agent to further improve adhesion strength of dopamine methacrylamide (DMA) system. The structure of UV‐PVA was confirmed, and the degree of acryloyl group substitution (DS) was easily varied from 10 to 40% by varying the molar ratio of acryloyl chloride to ? OH of PVA. The effects of ultraviolet light intensity, content of DMA and DS values of PVA on the photopolymerization kinetics were studied, and the effects of DS value on the adhesive strength, swelling performance and cell attachment were also investigated. It was found that adhesive containing UV‐PVA with 40% DS value yielded the highest adhesive strength, a relatively low swelling ratio and good biocompatibility. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Preparation,characterization and release profiles of pH‐sensitive chitosan beads

Spherical crosslinked beads using chitosan, glycine and glutaraldehyde were prepared for controlled release formulations. Structural investigation of the beads was made with IR analysis. Morphological study of the beads was carried out by scanning electron microscopy. The swelling behaviour of the beads was monitored as a function of time in solutions of different pH. The release experiments were performed using thiamine hydrochloride (Thi‐HCl) as a model drug. These preliminary results suggest the possibility of modifying the formulations to obtain the desired controlled release of drug in an oral sustained delivery system. © 2000 Society of Chemical Industry     

Comparison the properties of PVA/Na+‐MMT nanocomposite hydrogels prepared by physical and physicochemical crosslinking

A novel physicochemical crosslinked nanocomposite hydrogel based on polyvinyl alcohol (PVA) and natural Na‐montmorillonite (Na⁺‐MMT) was synthesized by chemical crosslinking of nanocomposite hydrogel followed by a freezing‐thawing process. The effects of physical crosslinking, as well as physicochemical crosslinking, on the structure, morphology, and properties (thermal, mechanical, swelling, and deswelling) of nanocomposite hydrogels were investigated and compared with each other. The structure and morphology of nanocomposites were studied by Fourier transform infrared, X‐ray diffraction, field emission scanning electron microscopy, and transmission electron microscopy techniques. The thermal and mechanical properties of nanocomposites that were affected by physical and physicochemical crosslinking were evaluated by thermogravimetric analysis, differential scanning calorimeter, dynamic mechanical analysis, hardness test, and Water vapor transmission rate (WVTR) experiments. The results showed that the physicochemical crosslinking of a PVA nanocomposite leads to a reduction in crystallinity and melting temperature, as well as an increase in the Hardness and WVTR compared to a physically crosslinked PVA nanocomposite hydrogel. The swelling and deswelling experiments were performed using a gravimetric method, and it was shown that controlled crosslinking of PVA nanocomposite hydrogel with glutaraldehyde causes the swelling ratio to increase and the cumulative amount of water loss to decrease. The swelling (sorption) and deswelling (desorption) kinetics data for physically and physicochemical crosslinking of nanocomposite hydrogels were fitted with a fickian model. It is concluded that through control crosslinking of PVA nanocomposite can lead to a hydrogel with higher swelling capacity than that is in conventional PVA nanocomposite hydrogel. POLYM. COMPOS., 37:897–906, 2016. © 2014 Society of Plastics Engineers     

Preparation and characterization of poly(vinyl alcohol) cryogel‐silver nanocomposites and evaluation of blood compatibility,cytotoxicity, and antimicrobial behaviors

In this investigation, cryogels composed of poly(vinyl alcohol) (PVA) were prepared by repeated freeze‐thaw method. The prepared cryogels served as templates for producing highly stable and uniformly distributed silver nanoparticles via in situ reduction of silver nitrate (AgNO₃) using alkaline formaldehyde solution as reducing agent. The structure of the PVA/Ag cryogel nanocomposites was characterized by a Fourier transform infrared and Raman spectroscopy. The morphologies of pure PVA cryogels and PVA/Ag nanocomposites were observed by a scanning electron microscopy (SEM) and transmission electron microscopy (TEM) techniques. The SEM analysis suggested that cryogels show a well defined porous morphology whereas TEM micrographs revealed the presence of nearly spherical and well separated Ag nanoparticles with diameter about 100 nm. XRD results showed all relevant Bragg's reflections for crystal structure of silver nanoparticles. The amount of silver in cryogel nanocomposites and thermal stability were determined by inductively coupled plasma atomic emission spectrometry (ICP‐AES) and thermogravimetric analysis measurements. Mechanical properties of nanocomposites were observed in terms of tensile strength. The antibacterial studies of the synthesized nanosilver containing cryogels showed good antibacterial activity against both gram‐negative and gram‐positive bacteria. The prepared PVA/Ag nanocomposites were also investigated for swelling and deswelling behaviors. The results reveal that both the swelling and deswelling process depends on the chemical composition of the cryogel silver nanocomposites, number of freeze‐Thaw cycles and pH and temperature of the swelling medium. The biocompatibility of the prepared nanocomposites was judged by in vitro methods of percent hemolysis and protein (BSA) adsorption. POLYM. COMPOS., 36:1983–1997, 2015. © 2014 Society of Plastics Engineer     

Chitosan,itaconic acid and poly(vinyl alcohol) hybrid polymer networks of high degree of swelling and good mechanical strength

Chitosan is a biodegradable, non‐toxic, biocompatible polymer convenient for use in drug delivery. In this study, hybrid polymeric networks (HPNs) based on chitosan, itaconic acid and poly(vinyl alcohol) (PVA) were prepared and characterized. Chitosan was dissolved in itaconic acid in order to obtain ionic crosslinking with the dicarboxylic acid. In the second step, this chitosan/itaconic acid network was mixed with PVA and chemically crosslinked with glutaraldehyde. The chitosan/itaconic acid ratio was kept constant, while the concentrations of PVA and glutaraldehyde were varied. All samples were characterized using swelling studies, dynamic mechanical analysis, Fourier transform infrared spectroscopy, differential scanning calorimetry, thermogravimetric analysis, X‐ray diffraction and scanning electron microscopy. The equilibrium degrees of swelling obtained for the HPNs were higher than most of the values reported for chitosan hydrogels obtained by dissolving chitosan in acetic acid or HCl aqueous solutions. This method of synthesis also resulted in hydrogels with better mechanical properties and thermal stability. By changing the PVA content and the degree of crosslinking, it is possible to finely tune the properties of the HPNs, which could make them suitable as potential matrices in controlled drug delivery. Copyright © 2010 Society of Chemical Industry     

Elaboration of ion‐exchange membranes with semi‐interpenetrating polymer networks containing poly(vinyl alcohol) as polymer matrix

Ion‐exchange membranes were prepared with semi‐interpenetrating networks (s‐IPNs) by mixing a film‐forming polymer, poly(vinyl alcohol) (PVA), for the crosslinked matrix and a polyelectrolyte for the specific ion‐exchange property. Poly(sodium styrenesulfonate) (PSSNa), poly(styrenesulfonic acid) (PSSH), and poly(acrylic acid) (PAA) were used as anionic polyelectrolytes. Polyethyleneimine (PEI), poly(1,1‐dimethyl‐3,5‐dimethylenepiperidinium chloride) (PDDPCl), and poly(diallyldimethylammonium chloride) (PDDMACl) were used as cationic polyelectrolytes. Membranes with PVA 60% and polyelectrolyte 40% showed the best compromise among mechanical, homogeneous, and ion‐exchange properties. Gaseous dibromoethane was used as a crosslinking agent to form the PVA network and for efficient entrapment of the polyelectrolyte in the membrane. The crosslinking time (tc) was optimized for each type of membrane and its influence was studied by thermogravimetric analysis of the sample and scanning electron microscopy observations. The best results (large ion‐exchange capacity and small swelling ratio) were obtained for PVA/PAA and PVA/PSSNa/PSSH membranes. Among anion‐exchange membranes, PVA/PEI gave the best permselectivity (low co‐ion leakage) and the highest ion‐exchange capacity. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 1572–1580, 2002; DOI 10.1002/app.10420     

Studies on semi‐interpenetrating polymer network beads of chitosan–poly(ethylene glycol) for the controlled release of drugs

Semi‐interpenetrating polymer network beads of chitosan and poly(ethylene glycol) were prepared and characterized for controlled release of drugs. A viscous solution of chitosan and poly(ethylene glycol) in 2% acetic acid was extruded as droplets with the help of a syringe and crosslinked using glutaraldehyde. The structural studies of the beads were performed by using a Fourier transform infrared spectrophotometer and scanning electron microscope. The swelling behavior, solubility, hydrolytic degradation, and loading capacity of the beads for isoniazid were investigated. The structural changes of the beads at pH 2.0 and 7.4 were put forward using the data obtained by infrared and ultraviolet spectroscopy. The prepared beads showed 82% drug‐loading capacity, which suggested that these semi‐interpenetrating polymer network beads are suitable for controlled release of drugs in an oral sustained delivery system. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 639–649, 2001