Swelling and diffusion characteristics of novel semi‐interpenetrating network hydrogels composed of poly[(acrylamide)‐ co‐(sodium acrylate)] and poly[(vinylsulfonic acid), sodium salt]

A series of novel semi‐interpenetrating polymer networks (IPNs) composed of poly[(acrylamide)‐co‐(sodium acrylate)] with varying amounts (5, 10, and 15 wt%) of poly[(vinylsulfonic acid), sodium salt] was synthesized. The semi‐IPN hydrogels were characterized by infrared spectroscopy. The swelling behavior of these IPNs was studied in distilled water/physiological solutions/buffer solutions/salt solutions. As the amount of poly[(vinylsulfonic acid), sodium salt] increased in the network, the swelling capacity of the semi‐IPNs increased considerably. The swelling and diffusion characteristics such as water penetration velocity (v), diffusion exponent (n), and diffusion coefficient (D) were calculated in distilled water, as well as in other physiological solutions. The highest swelling capacity was noted in urea and glucose solutions. The semi‐IPN hydrogels followed non‐Fickian diffusion behavior in water and physiological fluids, whereas Fickian behavior was observed in buffer solutions. The stimuli‐responsive characteristics towards physiological fluids, salt concentration, and temperature of these semi‐IPN hydrogels were also investigated. The swelling behavior of the semi‐IPNs decreased markedly with an increase of the concentration of the salt solutions. Copyright © 2006 Society of Chemical Industry     

Thermal and pH dual‐responsive hydrogels based on semi‐interpenetrating network of poly(N‐isopropylacrylamide) and collagen nanofibrils

Hydrogels with environment‐sensitive properties have great potential applications in the controlled drug release field. In this paper, hybrid hydrogels with semi‐interpenetrating polymer networks (semi‐IPNs), composed of poly(N‐isopropylacrylamide) (PNIPAM) as the thermo‐sensitive component by in situ polymerization and self‐assembled collagen nanofibrils as the pH‐sensitive framework, were prepared for controlled release of methyl violet as a model drug. From Fourier transform infrared spectroscopy and scanning electron microscopy, it was indicated that the crosslinking of PNIPAM in the presence of collagen nanofibrils led to the formation of semi‐IPNs with homogeneous porous structure, and the semi‐IPNs showed improved thermal stability and elastic properties compared with the native collagen as determined using differential scanning calorimetry and rheologic measurements. Furthermore, the semi‐IPNs possessed swelling behaviors quite different from those of neat collagen or PNIPAM hydrogel under various pH values and temperatures. Correspondingly, as expected, the drug release behavior in vitro for semi‐IPNs performed variously compared with that for single‐component semi‐IPNs, which revealed the tunable performance of semi‐IPNs for release ability. Finally the thermo‐ and pH‐responsive mechanism of the semi‐IPNs was illuminated to provide guidance for the application of the thermo‐ and pH‐sensitive collagen‐based hybrid hydrogels in controlled drug delivery systems. © 2019 Society of Chemical Industry     

Poly(2‐hydroxyethyl methacrylate) hydrogel: from a brittle material to a nanofilled semi‐interpenetrating polymer network with potential application in wound dressings

In this work we report the photopolymerization of poly(2‐hydroxyethyl methacrylate) (PHEMA) together with a hydrophilic chitosan derivate (carboxymethyl‐chitosan) to yield a semi‐interpenetrating polymer network (semi‐IPN) that was filled with poly(N‐vinylcaprolactam)/poly(ethylene glycol methacrylate) core–shell nanogels in order to enhance the mechanical properties of the resulting hydrogels. The mechanical properties of the nanofilled semi‐IPNs were found to be more suitable for wound dressing applications than the PHEMA hydrogel as described by dynamic mechanical analysis in dry form and submerged in water. This was evidenced by a higher Young's modulus and higher elongation at break in the semi‐IPNs compared to blank PHEMA hydrogels. Furthermore, when the hydrogels were filled with nanogels, there was an elongation at break similar to that of skin with only a slightly lower Young's modulus. © 2019 Society of Chemical Industry     

Synthesis and characterization of novel pH‐sensitive chitosan‐poly(acrylamide‐co‐itaconic acid) hydrogels

Novel pH‐sensitive chitosan‐poly(acrylamide‐co‐itaconic acid) hydrogels were prepared by free radical copolymerization of acrylamide and itaconic acid (IA) in chitosan solution. The hydrogels were characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, thermogravimetric analysis, differential scanning calorimetry and the swelling ratios of the hydrogels in water (pH 6.8) and pH 1.2. The influence of composition on the thermal properties of the hydrogels was assessed. The glass transition temperatures of the samples increased with IA content, ranging from 110 to 136 °C. Swelling of the hydrogels was found to obey second‐order kinetics with respect to the remnant swelling, indicating that diffusion is controlled by the relaxation of chains. The equilibrium swelling degree was strongly dependent on pH and composition. At both pH values the highest water uptake was obtained for the IA‐free sample M1. From the equilibrium swelling results the average molar mass between crosslinks, M_c, and the crosslink density of the chitosan‐poly(acrylamide‐co‐itaconic acid) samples were calculated. The results evidenced the reinforcing effect of IA on the hydrogel structure. It is concluded that these highly swellable pH‐sensitive hydrogels can be useful for applications in biomedicine and pharmacy. © 2013 Society of Chemical Industry     

Blood protein adsorption onto macroporous semi‐interpenetrating polymer networks (IPNs) of poly(ethylene glycol) (PEG) and poly(2‐hydroxyethyl methacrylate) (PHEMA) and assessment of in vitro blood compatibility

This work reports a study of the adsorption of fibrinogen (Fgn) onto the surface of semi‐interpenetrating polymer networks (IPNs) of poly(ethylene glycol) (PEG) and poly(2‐hydroxyethyl methacrylate) (PHEMA). The semi‐IPNs were prepared by polymerizing 2‐hydroxyethyl methacrylate with a redox system and in the presence of PEG and crosslinker ethyleneglycol dimethacrylate. The proposed spongy IPNs were characterized by Fourier transform infrared and environmental scanning electron microscopy methods, and network structural parameters, such as molecular weight between crosslinks and crosslink density, were calculated using swelling measurements. The adsorption of Fgn was carried out onto the spongy IPNs and kinetic constants of the adsorption process as well as isotherm constants were evaluated. The adsorption process was also studied under varying pH, ionic strengths, and chemical architecture of the IPNs. The anti‐thrombogenic behaviour of the polymer matrices was judged using in vitro tests. Copyright © 2006 Society of Chemical Industry     

Radiation synthesis and environmental responsiveness of semi‐interpenetrating polymer networks composed of poly(dimethyl–aminoethyl methacrylate) and poly(ethylene oxide)

Semi‐interpenetrating polymer networks (semi‐IPNs) composed of poly(dimethyl–aminoethyl methacrylate) (PDMAEMA) and poly(ethylene oxide) (PEO) were synthesized by γ‐radiation; three semi‐IPNs with 80 : 20, 90 : 10, and 95 : 5 weight ratios of DMAEMA/PEO were obtained by use of this technique. The gel–dose curves showed that the hydrogels were characterized by a structure typical of semi‐IPNs and the results of elemental analysis supported this point. The temperature‐induced phase transition of semi‐IPNs with the composition of 95 : 5 was still retained, with the lower critical solution temperature of PDMAEMA shifting from 40 to 27°C. The temperature sensitivity of the other two semi‐IPNs gradually disappeared. The pH sensitivity of three semi‐IPNs was still retained but the pH shifted slightly to lower values with increasing PEO content in the semi‐IPNs. The effect of PEO content in semi‐IPNs on their environmental responsiveness was discussed. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2995–3001, 2004     

pH/temperature‐responsive semi‐IPN hydrogels composed of alginate and poly(N‐isopropylacrylamide)

Amino semitelechelic poly(N‐isopropylacrylamide) (PNIPAAm) was prepared by radical polymerization with aminoethanethiol hydrochloride as a chain‐transfer agent. Semi‐interpenetrating polymer network (semi‐IPN) hydrogels, composed of alginate and amine‐terminated PNIPAAm, were prepared by crosslinking with calcium chloride. From the swelling behaviors of semi‐IPNs at various pH's and Fourier transform infrared spectra at high temperatures, the formation of a polyelectrolyte complex was confirmed from the reaction between carboxyl groups in alginate and amino groups in modified PNIPAAm. Semi‐IPN hydrogels reached an equilibrium swelling state within 24 h. The water state in hydrogels, investigated by differential scanning calorimetry, showed that sample CAN55 [alginate/PNIPAAm (w/w) = 50/50] exhibited the lowest equilibrium water content and free water content among the hydrogels tested, which was attributed to its more compact structure compared to other samples and the high content of interchain bonding within the hydrogels. Alginate/PNIPAAm semi‐IPN hydrogels exhibited a reasonable sensitivity to the temperature, pH, and ionic strength of swelling medium. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 1128–1139, 2002     

Swelling behavior of semi‐interpenetrating polymer network hydrogels composed of poly(vinyl alcohol) and poly(acrylamide‐co‐sodium methacrylate)

Interpenetrating polymer network (IPN) hydrogels based on poly(vinyl alcohol) (PVA) and poly(acrylamide‐co‐sodium methacrylate) poly(AAm‐co‐SMA) were prepared by the semi IPN method. These IPN hydrogels were prepared by polymerizing aqueous solution of acrylamide and sodium methacrylate, using ammonium persulphate/N,N,N¹,N¹‐tetramethylethylenediamine (APS/TMEDA) initiating system and N,N¹‐methylene‐bisacrylamide (MBA) as a crosslinker in the presence of a host polymer, poly(vinyl alcohol). The influence of reaction conditions, such as the concentration of PVA, sodium methacrylate, crosslinker, initiator, and reaction temperature, on the swelling behavior of these IPNs was investigated in detail. The results showed that the IPN hydrogels exhibited different swelling behavior as the reaction conditions varied. To verify the structural difference in the IPN hydrogels, scanning electron microscopy (SEM) was used to identify the morphological changes in the IPN as the concentration of crosslinker varied. In addition to MBA, two other crosslinkers were also employed in the preparation of IPNs to illustrate the difference in their swelling phenomena. The swelling kinetics, equilibrium water content, and water transport mechanism of all the IPN hydrogels were investigated. IPN hydrogels being ionic in nature, the swelling behavior was significantly affected by environmental conditions, such as temperature, ionic strength, and pH of the swelling medium. Further, their swelling behavior was also examined in different physiological bio‐fluids. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 302–314, 2005     

Behavior of semi IPN hydrogels composed of PEG and AAm/SMA copolymers in swelling and uptake of Janus Green B from aqueous solutions

Semi-interpenetrating polymer network (semi IPN) hydrogels of poly(ethylene glycol; PEG) were prepared as a water adsorbent for dye (Janus Green B) sorption. For this, PEG and copolymer of acrylamide/sodium methacrylate (AAm/SMA) were prepared by polymerization of aqueous solution of acrylamide (AAm), sodium methacrylate (SMA) using ammonium persulfate (APS)/N,N,N′,N′-tetramethylethylenediamine (TEMED) as redox initiating pair in presence of PEG and poly(ethylene glycol)dimethacrylate (PEGDMA) as crosslinker. FTIR spectroscopy was used to identify the presence of different repeating units in the semi IPNs. Some swelling and diffusion characteristics were calculated for different semi IPNs and hydrogels prepared under various formulations. Water uptake and dye sorption properties of AAm/SMA hydrogels and AAm/SMA/PEG semi IPNs were investigated as a function of chemical composition of the hydrogels. Janus Green B have used in sorption studies. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Salt and pH sensitive semi‐interpenetrating polyelectrolyte hydrogels poly(HEMA‐co‐METAC)/PEG and its BSA adsorption behavior

A novel semi‐interpenetrating poly(2‐hydroxyethyl methacrylate) (pHEMA) based polyelectrolyte hydrogel [p(HEMA‐co‐METAC)/PEG] was prepared by copolymerizing HEMA with the cationic monomer 2‐methacryloyloxyethyltrimethyl ammonium chloride (METAC) in the presence of polyethylene glycol (PEG) with different content and molecular weight (MW 4000 and 400). The chemical structure of the gels was confirmed by FT‐IR spectroscopy, morphology study was performed by scanning electron microscope (SEM), thermal stability was revealed by thermogravimetric analysis (TGA), and the mechanical properties were determined by electronic universal testing machine. Swelling studies showed introduction of cationic monomer METAC led to high water content, and the obvious salt and pH sensitive properties were observed which proved the smart behavior of the semi‐interpenetrating polymer networks (IPNs) gels. In addition, the effect of temperature and some important biological solution on swelling behavior were reported. Cytotoxicity test demonstrated that synthesized gels owned satisfactory cytocompatibility and were convenient for the application as biomaterials. Finally, the weak bovine serum albumin (BSA) adsorption on semi‐IPNs by introducing METAC and controlling the content of PEG in gels demonstrated that they were of good protein resistance effect in biomedical applications. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41537.     

Synthesis and swelling properties of a pH‐ and temperature‐dual responsive hydrogel by inverse microemulsion polymerization

A novel pH‐ and temperature‐dual responsive hydrogel was synthesized by inverse microemulsion polymerization, using itonic acid (IA) as pH‐responsive monomer, N‐isopropylacrylamide (NPAM) as thermo‐responsive monomer and acrylamide (AM) as the nonionic hydrophilic monomer. Factors affecting water and salt absorption, as well as swellability of the dual responsive hydrogels, such as IA/NPAM mass ratio and crosslinker amount, were investigated. pH‐ and temperature‐sensitivity and dynamic viscoelasticity behaviors of the dual responsive hydrogels were also studied. The dual responsive responsive hydrogels showed suitable water and salt absorbency, remarkable pH‐, and temperature‐sensitivity, adjustable swellability and enhanced viscoelastic behaviors under high stress. Water absorbency and pH‐sensitivity increased while salt absorbency and temperature‐ sensitivity decreased with increasing IA/NIPAM mass ratio. Both water absorbency and salt absorbency increased first with crosslinker amount increased to 0.2 wt %, and then decreased with increasing crosslinker amount. Temperature‐induced shrinkage range of the dual responsive hydrogels was higher and broader than that of the conventional poly(N‐isopropylacrylamide) hydrogel. TEM indicated that the as‐synthesized hydrogel particles were regular and spherical‐like in shape and had the mean particle size of 49nm in the range of 30–78 nm. FTIR indicated the structure of the dual responsive hydrogels. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42139.     

Temperature‐responsive characteristics of poly(N‐isopropylacrylamide) hydrogels with macroporous structure

Macroporous poly(N‐isopropylacrylamide) (PNIPA) hydrogels were synthesized by free‐radical crosslinking polymerization in aqueous solution from N‐isopropylacrylamide monomer and N,N‐methylenebis (acrylamide) crosslinker using poly(ethylene glycol) (PEG) with three different number‐average molecular weights of 300, 600 and 1000 g mol^?1 as the pore‐forming agent. The influence of the molecular weight and amount of PEG pore‐forming agent on the swelling ratio and network parameters such as polymer–solvent interaction parameter (χ) and crosslinking density (ν_E) of the hydrogels is reported and discussed. Scanning electron micrographs reveal that the macroporous network structure of the hydrogels can be adjusted by applying different molecular weights and compositions of PEG during polymerization. At a temperature below the volume phase transition temperature, the macroporous hydrogels absorbed larger amounts of water compared to that of conventional PNIPA hydrogels, and showed higher equilibrated swelling ratios in aqueous medium. Particularly, the unique macroporous structure provides numerous water channels for water diffusion in or out of the matrix and, therefore, an improved response rate to external temperature changes during the swelling and deswelling process. These macroporous PNIPA hydrogels may be useful for potential applications in controlled release of macromolecular active agents. Copyright © 2006 Society of Chemical Industry     

Semi‐interpenetrating polymer networks based on polyurethane and poly(vinyl pyrrolidone) obtained by photopolymerization: Structure‐property relationships and bacterial adhesion

A range of semi‐interpenetrating polymer networks (semi‐IPNs) based on polyurethane (PU) and poly(vinyl pyrrolidone) (PVP) have been synthesized and characterized with respect to their thermodynamic characteristics, morphology, mechanical properties, surface properties, water sorption and bacterial adhesion. The free energies of mixing of PU and PVP in semi‐IPNs have been determined by the vapor sorption method and were shown to be positive for all compositions. The surface properties of semi‐IPNs were investigated using the dynamic contact angle analysis. It was shown that the advancing contact angle changes from 83.1° to 65.3° with increasing PVP from 7.05% to 57.38%. Scanning electron microscopy demonstrated that the semi‐IPNs are two‐phase systems with incomplete phase separation. The mechanical properties reflect the changes in structure of semi‐IPNs with increasing of amounts of PVP in the system. Incorporation of PVP into the semi‐IPN with PU restricts the ability of PVP to sorb water. As infection is likely to be caused by bacterial adherence to biomedical implants, the bacterial adhesion data suggests that the semi‐IPNs with PVP content below 22.52% may be useful for biomedical material applications. Polym. Eng. Sci. 44:940–947, 2004. © 2004 Society of Plastics Engineers.     

Rheological properties of poly(ethylene glycol)/poly(N‐isopropylacrylamide‐co‐2‐acrylamido‐2‐methylpropanesulphonic acid) semi‐interpenetrating networks

For the increasing demands of multifunctional materials in applications such as drug delivery system, a pH‐ and temperature‐responsive polyelectrolyte copolymer gel system was studied using rheometry. Rheological properties, determined by plate–plate rheometry in oscillatory shear, of hydrogels formed by free radical initiated copolymerization of N‐isopropylacrylamide (NIPA) and 2‐acrylamido‐2‐methylpropanesulphonic acid (AMPS) in the presence of methylene bisacrylamide (MBAA) as crosslinker are compared with the properties of semi‐interpenetrating network (SIPN) polyelectrolyte gels made by incorporation of poly(ethylene glycol) with molar mass 6000 g mol^?1 (PEG6000). Based on our systematic studies for this PEG/SIPN system, the effects of initiator and crosslinker concentration, relative proportions of comonomer units in the main chains, PEG6000 content and temperature on viscoelastic properties, unusual high storage moduli at small strain for the SIPN were discussed. The SIPN gel with characteristics of PEG molecules as well as pH and temperature responsiveness from AMPS and NIPA units has potential application in drug delivery system design. Ice‐like rheological behavior of the PEG/AMPS‐NIPA SIPN gels at low temperature was first time reported and water remains homogeneous without phase separation in PEG/AMPS‐NIPA SIPN hydrogels at low temperature may be considered as an ideal candidate for water storage material. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

A study on water and dye sorption capacities of novel ternary acrylamide/sodium acrylate/PEG semi IPN hydrogels

Here, a novel ternary semi interpenetrating polymer networks (semi IPNs) have been synthesized. An effective role to develop mechanically strong polymeric materials has been through the preparation of interpenetrating polymer networks (IPNs). The highly swelling superabsorbent semi IPNs were prepared by introducing poly(ethylene glycol), (PEG) into an acrylamide/sodium acrylate, (AAm/SA) hydrogels. For swelling characterization, swelling experiments were performed in water at 25 °C, gravimetrically. Water uptake and dye sorption properties of AAm/SA hydrogels and AAm/SA/PEG semi IPNs were investigated as a function of chemical composition of the hydrogels. AAm/SA hydrogels and AAm/SA/PEG semi IPNs were used in experiments on sorption of water-soluble cationic dye such as “Janus Green B” (JGB). For sorption of JGB into AAm/SA hydrogels and AAm/SA/PEG semi IPNs were studied by batch sorption technique at 25 °C. For the analysis of sorption mechanism and for calculation of some binding parameters of JGB from aqueous solutions, some linearization methods such as Klotz, Scatchard, and Langmuir linearization methods have been used.     

Water and temperature response of semi‐IPN hydrogels composed of chitosan and polyacrylonitrile

Temperature‐responsive semi‐interpenetrating polymer networks (semi‐IPNs) constructed with chitosan and polyacrylonitrile (PAN) were crosslinked with glutaraldehyde. The semi‐IPN determined the sorption behavior of water at several temperatures and at a relative humidity (RH) of 95% using a dynamic vapor sorption (DVS) system. Water diffusion coefficients of semi‐IPNs were calculated according to the Fickian Law at several temperatures and exhibited a relatively water uptake, 0.1–0.4 at room temperature. The water uptake of hydrogels depended on temperature. The apparent activation energy was dependent of the composition of the semi‐IPN with value of 32.8–34.8 kJmol^?1. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 12: 2721–2724, 2003     

Engineering properties of poly(vinyl chloride)–poly(butyl methacrylate) semi‐1 and semi‐2 interpenetrating polymer networks

Semi‐1 and semi‐2 interpenetrating polymer networks (IPNs) of poly(vinyl chloride) (PVC) and in situ formed poly(butyl methacrylate) (PBMA) have been synthesized using diallyl phthalate and ethylene glycol dimethacrylate as the crosslinkers of PVC and PBMA, respectively. These were then characterized with reference to their mechanical, thermal, and morphological properties. The mechanical and thermal characteristics revealed modification over the unmodified polymeric systems in relation to their phase morphologies. The semi‐1 IPNs displayed a decrease in their mechanical parameters of modulus and UTS while semi‐2 IPNs exhibited a marginal increase in these two values. The semi‐1 IPNs, however, also revealed a decrease in the elongation and toughness values away from the normal behavior. The thermomechanical behavior of both the systems is in conformity with their mechanicals in displaying the softening characteristics of the system and stabilization over unmodified PVC. The DSC thermograms are also correlated to these observations along with the heterogeneous phase morphology which is displayed by both the systems especially at higher concentration of PBMA incorporation. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Poly(N‐isopropylacrylamide‐co‐sodium acrylate) hydrogels: Interactions with surfactants

Poly(N‐isopropylacrylamide‐co‐sodium acrylate) [poly(NIPAM‐co‐SA)] hydrogels were modified with three different kind of surfactants (cationic, anionic, and nonionic) to study the effect on the swelling properties. The structural variation of the surfactant‐modified hydrogels was investigated in detail. The interaction between the surfactants and the hydrogel varies and strictly depends on the surfactant type. The variation in thermal stability of the modified surfactant hydrogels was investigated and compared with unmodified hydrogel. Further, the hydrogel swelling/diffusion kinetic parameters were investigated and diffusion of water into hydrogel was found to be of the non‐Fickian transport mechanism. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3423–3430, 2007     

Preparation of alginate/poly(N‐isopropylacrylamide) semi‐interpenetrating and fully interpenetrating polymer network hydrogels with γ‐ray irradiation and their swelling behaviors

Semi‐interpenetrating polymer network (semi‐IPN) and fully interpenetrating polymer network (full‐IPN) hydrogels composed of alginate and poly(N‐isopropylacrylamide) were prepared with γ‐ray irradiation. The semi‐IPN hydrogels were prepared through the irradiation of a mixed solution composed of alginate and N‐isopropylacrylamide (NIPAAm) monomer to simultaneously achieve the polymerization and self‐crosslinking of NIPAAm. The full‐IPN hydrogels were formed through the immersion of the semi‐IPN film in a calcium‐ion solution. The results for the swelling and deswelling behaviors showed that the swelling ratio of semi‐IPN hydrogels was higher than that of full‐IPN hydrogels. A semi‐IPN hydrogel containing more alginate exhibited relatively rapid swelling and deswelling rates, whereas a full‐IPN hydrogel showed an adverse tendency. All the hydrogels with NIPAAm exhibited a change in the swelling ratio around 30–40°C, and full‐IPN hydrogels showed more sensitive and reversible behavior than semi‐IPN hydrogels under a stepwise stimulus. In addition, the swelling ratio of the hydrogels continuously increased with the pH values, and the swelling processes were proven to be repeatable with pH changes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 4439–4446, 2006     

Phase separation in the polyurethane/poly(2‐hydroxyethyl methacrylate) semi‐interpenetrating polymer networks synthesized by different ways

The thermal, dynamic mechanical analysis, morphology and mechanical properties of semi‐interpenetrating polymer networks based on crosslinked polyurethane (PU) and poly(2‐hydroxyethyl methacrylate) (PHEMA) synthesized by photopolymerization and by thermopolymerization have been investigated. The thermal analysis has evidenced the two glass temperature transitions in the semi‐IPNs and this is confirmed by the thermodynamic miscibility investigation of the systems. The Dynamic Mechanical Analysis spectra have shown that the phase separation is more significant in the thermopolymerized semi‐IPNs: the tan δ peaks of constituent polymers are more distinct and the minimum between the two peaks is deeper. The calculated segregation degree values of semi‐IPN's components are significantly higher for thermopolymerized semi‐IPNs, thereby the process of phase separation in the thermopolymerized semi‐IPNs is more developed. The structures of two series of samples investigated by SEM are completely different. The mechanical properties reflect these changes in structure of semi‐IPNs with increasing amount of PHEMA and with the changing of the method of synthesis. The results suggest that the studied semi‐IPNs are two‐phase systems with incomplete phase separation. The semi‐IPN samples with early stage of phase separation demonstrate higher mechanical characteristics. POLYM. ENG. SCI., 2008. © 2008 Society of Plastics Engineers